Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <com/sun/star/uno/Reference.h>
21 : #include <com/sun/star/uno/RuntimeException.hpp>
22 : #include <com/sun/star/uno/XComponentContext.hpp>
23 : #include <com/sun/star/awt/Rectangle.hpp>
24 : #include <com/sun/star/beans/PropertyValue.hpp>
25 : #include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
26 : #include <com/sun/star/lang/XInitialization.hpp>
27 : #include <com/sun/star/lang/XServiceInfo.hpp>
28 : #include <com/sun/star/drawing/XCustomShapeEngine.hpp>
29 : #include <rtl/ref.hxx>
30 : #include "svx/EnhancedCustomShape2d.hxx"
31 : #include "EnhancedCustomShape3d.hxx"
32 : #include "EnhancedCustomShapeFontWork.hxx"
33 : #include "EnhancedCustomShapeHandle.hxx"
34 : #include "svx/EnhancedCustomShapeGeometry.hxx"
35 : #include <svx/unoshape.hxx>
36 : #include "svx/unopage.hxx"
37 : #include "svx/unoapi.hxx"
38 : #include <svx/svdobj.hxx>
39 : #include <svx/svdoashp.hxx>
40 : #include <svx/svdogrp.hxx>
41 : #include <svx/svdorect.hxx>
42 : #include <editeng/outlobj.hxx>
43 : #include <editeng/outliner.hxx>
44 : #include <svx/svdoutl.hxx>
45 : #include <svl/itemset.hxx>
46 : #include <svx/svdopath.hxx>
47 : #include <svx/svdpage.hxx>
48 : #include <svx/svdmodel.hxx>
49 : #include "svx/svditer.hxx"
50 : #include <uno/mapping.hxx>
51 : #include <basegfx/polygon/b2dpolypolygontools.hxx>
52 : #include <basegfx/tools/unotools.hxx>
53 : #include <com/sun/star/document/XActionLockable.hpp>
54 : #include <cppuhelper/implbase3.hxx>
55 : #include <cppuhelper/supportsservice.hxx>
56 :
57 : using namespace css;
58 : using namespace css::uno;
59 :
60 : class SdrObject;
61 : class SdrObjCustomShape;
62 :
63 : namespace {
64 :
65 : class EnhancedCustomShapeEngine : public cppu::WeakImplHelper3
66 : <
67 : css::lang::XInitialization,
68 : css::lang::XServiceInfo,
69 : css::drawing::XCustomShapeEngine
70 : >
71 : {
72 : css::uno::Reference< css::drawing::XShape > mxShape;
73 : sal_Bool mbForceGroupWithText;
74 :
75 : SdrObject* ImplForceGroupWithText( const SdrObjCustomShape* pCustoObj, SdrObject* pRenderedShape );
76 :
77 : public:
78 : EnhancedCustomShapeEngine();
79 : virtual ~EnhancedCustomShapeEngine();
80 :
81 : // XInterface
82 : virtual void SAL_CALL acquire() throw() SAL_OVERRIDE;
83 : virtual void SAL_CALL release() throw() SAL_OVERRIDE;
84 :
85 : // XInitialization
86 : virtual void SAL_CALL initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
87 : throw ( css::uno::Exception, css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
88 :
89 : // XServiceInfo
90 : virtual OUString SAL_CALL getImplementationName()
91 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
92 : virtual sal_Bool SAL_CALL supportsService( const OUString& rServiceName )
93 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
94 : virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames()
95 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
96 :
97 : // XCustomShapeEngine
98 : virtual css::uno::Reference< css::drawing::XShape > SAL_CALL render()
99 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
100 : virtual css::awt::Rectangle SAL_CALL getTextBounds()
101 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
102 : virtual css::drawing::PolyPolygonBezierCoords SAL_CALL getLineGeometry()
103 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
104 : virtual css::uno::Sequence< css::uno::Reference< css::drawing::XCustomShapeHandle > > SAL_CALL getInteraction()
105 : throw ( css::uno::RuntimeException, std::exception ) SAL_OVERRIDE;
106 : };
107 :
108 2560 : EnhancedCustomShapeEngine::EnhancedCustomShapeEngine() :
109 2560 : mbForceGroupWithText ( sal_False )
110 : {
111 2560 : }
112 5120 : EnhancedCustomShapeEngine::~EnhancedCustomShapeEngine()
113 : {
114 5120 : }
115 :
116 : // XInterface -----------------------------------------------------------------
117 :
118 21838 : void SAL_CALL EnhancedCustomShapeEngine::acquire() throw()
119 : {
120 21838 : OWeakObject::acquire();
121 21838 : }
122 21866 : void SAL_CALL EnhancedCustomShapeEngine::release() throw()
123 : {
124 21866 : OWeakObject::release();
125 21866 : }
126 :
127 : // XInitialization ------------------------------------------------------------
128 :
129 2560 : void SAL_CALL EnhancedCustomShapeEngine::initialize( const Sequence< Any >& aArguments )
130 : throw ( Exception, RuntimeException, std::exception )
131 : {
132 : sal_Int32 i;
133 2560 : Sequence< beans::PropertyValue > aParameter;
134 2560 : for ( i = 0; i < aArguments.getLength(); i++ )
135 : {
136 2560 : if ( aArguments[ i ] >>= aParameter )
137 2560 : break;
138 : }
139 5120 : for ( i = 0; i < aParameter.getLength(); i++ )
140 : {
141 2560 : const beans::PropertyValue& rProp = aParameter[ i ];
142 2560 : if ( rProp.Name == "CustomShape" )
143 2560 : rProp.Value >>= mxShape;
144 0 : else if ( rProp.Name == "ForceGroupWithText" )
145 0 : rProp.Value >>= mbForceGroupWithText;
146 2560 : }
147 2560 : }
148 :
149 : // XServiceInfo ---------------------------------------------------------------
150 0 : OUString SAL_CALL EnhancedCustomShapeEngine::getImplementationName()
151 : throw( RuntimeException, std::exception )
152 : {
153 0 : return OUString( "com.sun.star.drawing.EnhancedCustomShapeEngine" );
154 : }
155 0 : sal_Bool SAL_CALL EnhancedCustomShapeEngine::supportsService( const OUString& rServiceName )
156 : throw( RuntimeException, std::exception )
157 : {
158 0 : return cppu::supportsService(this, rServiceName);
159 : }
160 0 : Sequence< OUString > SAL_CALL EnhancedCustomShapeEngine::getSupportedServiceNames()
161 : throw ( RuntimeException, std::exception )
162 : {
163 0 : Sequence< OUString > aRet(1);
164 0 : OUString* pArray = aRet.getArray();
165 0 : pArray[0] = "com.sun.star.drawing.CustomShapeEngine";
166 0 : return aRet;
167 : }
168 :
169 : // XCustomShapeEngine -----------------------------------------------------------
170 0 : SdrObject* EnhancedCustomShapeEngine::ImplForceGroupWithText( const SdrObjCustomShape* pCustoObj, SdrObject* pRenderedShape )
171 : {
172 0 : bool bHasText = pCustoObj->HasText();
173 0 : if ( pRenderedShape || bHasText )
174 : {
175 : // applying shadow
176 0 : const SdrObject* pShadowGeometry = pCustoObj->GetSdrObjectShadowFromCustomShape();
177 0 : if ( pShadowGeometry )
178 : {
179 0 : if ( pRenderedShape )
180 : {
181 0 : if ( !pRenderedShape->ISA( SdrObjGroup ) )
182 : {
183 0 : SdrObject* pTmp = pRenderedShape;
184 0 : pRenderedShape = new SdrObjGroup();
185 0 : ((SdrObjGroup*)pRenderedShape)->GetSubList()->NbcInsertObject( pTmp );
186 : }
187 0 : ((SdrObjGroup*)pRenderedShape)->GetSubList()->NbcInsertObject( pShadowGeometry->Clone(), 0 );
188 : }
189 : else
190 0 : pRenderedShape = pShadowGeometry->Clone();
191 : }
192 :
193 : // apply text
194 0 : if ( bHasText )
195 : {
196 : // #i37011# also create a text object and add at rPos + 1
197 : SdrObject* pTextObj = SdrObjFactory::MakeNewObject(
198 0 : pCustoObj->GetObjInventor(), OBJ_TEXT, 0L, pCustoObj->GetModel());
199 :
200 : // Copy text content
201 0 : OutlinerParaObject* pParaObj = pCustoObj->GetOutlinerParaObject();
202 0 : if( pParaObj )
203 0 : pTextObj->NbcSetOutlinerParaObject( new OutlinerParaObject(*pParaObj) );
204 :
205 : // copy all attributes
206 0 : SfxItemSet aTargetItemSet( pCustoObj->GetMergedItemSet() );
207 :
208 : // clear fill and line style
209 0 : aTargetItemSet.Put(XLineStyleItem(XLINE_NONE));
210 0 : aTargetItemSet.Put(XFillStyleItem(XFILL_NONE));
211 :
212 : // get the text bounds and set at text object
213 0 : Rectangle aTextBounds = pCustoObj->GetSnapRect();
214 0 : SdrObject* pSdrObjCustomShape( GetSdrObjectFromXShape( mxShape ) );
215 0 : if ( pSdrObjCustomShape )
216 : {
217 0 : EnhancedCustomShape2d aCustomShape2d( pSdrObjCustomShape );
218 0 : aTextBounds = aCustomShape2d.GetTextRect();
219 : }
220 0 : pTextObj->SetSnapRect( aTextBounds );
221 :
222 : // if rotated, copy GeoStat, too.
223 0 : const GeoStat& rSourceGeo = pCustoObj->GetGeoStat();
224 0 : if ( rSourceGeo.nDrehWink )
225 : {
226 : pTextObj->NbcRotate(
227 0 : pCustoObj->GetSnapRect().Center(), rSourceGeo.nDrehWink,
228 0 : rSourceGeo.nSin, rSourceGeo.nCos);
229 : }
230 :
231 : // set modified ItemSet at text object
232 0 : pTextObj->SetMergedItemSet(aTargetItemSet);
233 :
234 0 : if ( pRenderedShape )
235 : {
236 0 : if ( !pRenderedShape->ISA( SdrObjGroup ) )
237 : {
238 0 : SdrObject* pTmp = pRenderedShape;
239 0 : pRenderedShape = new SdrObjGroup();
240 0 : ((SdrObjGroup*)pRenderedShape)->GetSubList()->NbcInsertObject( pTmp );
241 : }
242 0 : ((SdrObjGroup*)pRenderedShape)->GetSubList()->NbcInsertObject( pTextObj, CONTAINER_APPEND );
243 : }
244 : else
245 0 : pRenderedShape = pTextObj;
246 : }
247 :
248 : // force group
249 0 : if ( pRenderedShape )
250 : {
251 0 : if ( !pRenderedShape->ISA( SdrObjGroup ) )
252 : {
253 0 : SdrObject* pTmp = pRenderedShape;
254 0 : pRenderedShape = new SdrObjGroup();
255 0 : ((SdrObjGroup*)pRenderedShape)->GetSubList()->NbcInsertObject( pTmp );
256 : }
257 0 : pRenderedShape->SetPage( pCustoObj->GetPage() );
258 0 : pRenderedShape->SetModel( pCustoObj->GetModel() );
259 : }
260 : }
261 0 : return pRenderedShape;
262 : }
263 :
264 3140 : void SetTemporary( uno::Reference< drawing::XShape >& xShape )
265 : {
266 3140 : if ( xShape.is() )
267 : {
268 1171 : SvxShape* pShape = SvxShape::getImplementation( xShape );
269 1171 : if ( pShape )
270 1171 : pShape->TakeSdrObjectOwnership();
271 : }
272 3140 : }
273 :
274 3140 : Reference< drawing::XShape > SAL_CALL EnhancedCustomShapeEngine::render()
275 : throw ( RuntimeException, std::exception )
276 : {
277 3140 : Reference< drawing::XShape > xShape;
278 3140 : SdrObject* pSdrObjCustomShape( GetSdrObjectFromXShape( mxShape ) );
279 3140 : if ( pSdrObjCustomShape )
280 : {
281 : // retrieving the TextPath property to check if feature is enabled
282 : SdrCustomShapeGeometryItem& rGeometryItem = (SdrCustomShapeGeometryItem&)
283 3140 : pSdrObjCustomShape->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY );
284 3140 : sal_Bool bTextPathOn = sal_False;
285 3140 : const OUString sTextPath( "TextPath" );
286 3140 : uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sTextPath, sTextPath );
287 3140 : if ( pAny )
288 104 : *pAny >>= bTextPathOn;
289 :
290 6280 : EnhancedCustomShape2d aCustomShape2d( pSdrObjCustomShape );
291 3140 : sal_Int32 nRotateAngle = aCustomShape2d.GetRotateAngle();
292 3140 : bool bPostRotateAngle = aCustomShape2d.IsPostRotate();
293 :
294 3140 : sal_Bool bFlipV = aCustomShape2d.IsFlipVert();
295 3140 : sal_Bool bFlipH = aCustomShape2d.IsFlipHorz();
296 3140 : sal_Bool bLineGeometryNeededOnly = bTextPathOn;
297 :
298 3140 : SdrObject* pRenderedShape = aCustomShape2d.CreateObject( bLineGeometryNeededOnly );
299 3140 : if ( pRenderedShape )
300 : {
301 1171 : if ( bTextPathOn )
302 : {
303 14 : SdrObject* pRenderedFontWork = EnhancedCustomShapeFontWork::CreateFontWork( pRenderedShape, pSdrObjCustomShape );
304 14 : if ( pRenderedFontWork )
305 : {
306 14 : SdrObject::Free( pRenderedShape );
307 14 : pRenderedShape = pRenderedFontWork;
308 : }
309 : }
310 1171 : SdrObject* pRenderedShape3d = EnhancedCustomShape3d::Create3DObject( pRenderedShape, pSdrObjCustomShape );
311 1171 : if ( pRenderedShape3d )
312 : {
313 0 : bFlipV = bFlipH = sal_False;
314 0 : nRotateAngle = 0;
315 0 : SdrObject::Free( pRenderedShape );
316 0 : pRenderedShape = pRenderedShape3d;
317 : }
318 1171 : Rectangle aRect( pSdrObjCustomShape->GetSnapRect() );
319 :
320 1171 : const GeoStat& rGeoStat = ((SdrObjCustomShape*)pSdrObjCustomShape)->GetGeoStat();
321 1171 : if ( rGeoStat.nShearWink )
322 : {
323 2 : long nShearWink = rGeoStat.nShearWink;
324 2 : double nTan = rGeoStat.nTan;
325 2 : if ((bFlipV&&!bFlipH )||(bFlipH&&!bFlipV))
326 : {
327 0 : nShearWink = -nShearWink;
328 0 : nTan = -nTan;
329 : }
330 2 : pRenderedShape->Shear( pSdrObjCustomShape->GetSnapRect().Center(), nShearWink, nTan, false);
331 : }
332 1171 : if( !bPostRotateAngle && nRotateAngle )
333 : {
334 23 : double a = nRotateAngle * F_PI18000;
335 23 : pRenderedShape->NbcRotate( pSdrObjCustomShape->GetSnapRect().Center(), nRotateAngle, sin( a ), cos( a ) );
336 : }
337 1171 : if ( bFlipV )
338 : {
339 232 : Point aLeft( aRect.Left(), ( aRect.Top() + aRect.Bottom() ) >> 1 );
340 232 : Point aRight( aLeft.X() + 1000, aLeft.Y() );
341 232 : pRenderedShape->NbcMirror( aLeft, aRight );
342 : }
343 1171 : if ( bFlipH )
344 : {
345 30 : Point aTop( ( aRect.Left() + aRect.Right() ) >> 1, aRect.Top() );
346 30 : Point aBottom( aTop.X(), aTop.Y() + 1000 );
347 30 : pRenderedShape->NbcMirror( aTop, aBottom );
348 : }
349 : // Specifically for pptx imports
350 1171 : if( bPostRotateAngle && nRotateAngle )
351 : {
352 172 : double a = nRotateAngle * F_PI18000;
353 172 : pRenderedShape->NbcRotate( pSdrObjCustomShape->GetSnapRect().Center(), nRotateAngle, sin( a ), cos( a ) );
354 : }
355 1171 : pRenderedShape->NbcSetStyleSheet( pSdrObjCustomShape->GetStyleSheet(), true );
356 1171 : pRenderedShape->RecalcSnapRect();
357 : }
358 :
359 3140 : if ( mbForceGroupWithText )
360 0 : pRenderedShape = ImplForceGroupWithText( (SdrObjCustomShape*)pSdrObjCustomShape, pRenderedShape );
361 :
362 3140 : if ( pRenderedShape )
363 : {
364 1171 : aCustomShape2d.ApplyGluePoints( pRenderedShape );
365 2342 : xShape = SvxDrawPage::CreateShapeByTypeAndInventor( pRenderedShape->GetObjIdentifier(),
366 3513 : pRenderedShape->GetObjInventor(), pRenderedShape, NULL );
367 : }
368 6280 : SetTemporary( xShape );
369 : }
370 3140 : return xShape;
371 : }
372 :
373 7972 : awt::Rectangle SAL_CALL EnhancedCustomShapeEngine::getTextBounds()
374 : throw ( RuntimeException, std::exception )
375 : {
376 7972 : awt::Rectangle aTextRect;
377 7972 : SdrObject* pSdrObjCustomShape( GetSdrObjectFromXShape( mxShape ) );
378 7972 : uno::Reference< document::XActionLockable > xLockable( mxShape, uno::UNO_QUERY );
379 7972 : if ( pSdrObjCustomShape && pSdrObjCustomShape->GetModel() && xLockable.is() && !xLockable->isActionLocked() )
380 : {
381 6412 : if ( pSdrObjCustomShape )
382 : {
383 6412 : EnhancedCustomShape2d aCustomShape2d( pSdrObjCustomShape );
384 6412 : Rectangle aRect( aCustomShape2d.GetTextRect() );
385 6412 : aTextRect.X = aRect.Left();
386 6412 : aTextRect.Y = aRect.Top();
387 6412 : aTextRect.Width = aRect.GetWidth();
388 6412 : aTextRect.Height = aRect.GetHeight();
389 : }
390 : }
391 7972 : return aTextRect;
392 : }
393 :
394 0 : drawing::PolyPolygonBezierCoords SAL_CALL EnhancedCustomShapeEngine::getLineGeometry()
395 : throw ( RuntimeException, std::exception )
396 : {
397 0 : drawing::PolyPolygonBezierCoords aPolyPolygonBezierCoords;
398 0 : SdrObject* pSdrObjCustomShape( GetSdrObjectFromXShape( mxShape ) );
399 0 : if ( pSdrObjCustomShape )
400 : {
401 0 : EnhancedCustomShape2d aCustomShape2d( pSdrObjCustomShape );
402 0 : SdrObject* pObj = aCustomShape2d.CreateLineGeometry();
403 0 : if ( pObj )
404 : {
405 0 : Rectangle aRect( pSdrObjCustomShape->GetSnapRect() );
406 0 : sal_Bool bFlipV = aCustomShape2d.IsFlipVert();
407 0 : sal_Bool bFlipH = aCustomShape2d.IsFlipHorz();
408 :
409 0 : const GeoStat& rGeoStat = ((SdrObjCustomShape*)pSdrObjCustomShape)->GetGeoStat();
410 0 : if ( rGeoStat.nShearWink )
411 : {
412 0 : long nShearWink = rGeoStat.nShearWink;
413 0 : double nTan = rGeoStat.nTan;
414 0 : if ((bFlipV&&!bFlipH )||(bFlipH&&!bFlipV))
415 : {
416 0 : nShearWink = -nShearWink;
417 0 : nTan = -nTan;
418 : }
419 0 : pObj->Shear( aRect.Center(), nShearWink, nTan, false);
420 : }
421 0 : sal_Int32 nRotateAngle = aCustomShape2d.GetRotateAngle();
422 0 : if( nRotateAngle )
423 : {
424 0 : double a = nRotateAngle * F_PI18000;
425 0 : pObj->NbcRotate( aRect.Center(), nRotateAngle, sin( a ), cos( a ) );
426 : }
427 0 : if ( bFlipH )
428 : {
429 0 : Point aTop( ( aRect.Left() + aRect.Right() ) >> 1, aRect.Top() );
430 0 : Point aBottom( aTop.X(), aTop.Y() + 1000 );
431 0 : pObj->NbcMirror( aTop, aBottom );
432 : }
433 0 : if ( bFlipV )
434 : {
435 0 : Point aLeft( aRect.Left(), ( aRect.Top() + aRect.Bottom() ) >> 1 );
436 0 : Point aRight( aLeft.X() + 1000, aLeft.Y() );
437 0 : pObj->NbcMirror( aLeft, aRight );
438 : }
439 :
440 0 : basegfx::B2DPolyPolygon aPolyPolygon;
441 0 : SdrObjListIter aIter( *pObj, IM_DEEPWITHGROUPS );
442 :
443 0 : while ( aIter.IsMore() )
444 : {
445 0 : SdrObject* pNewObj = NULL;
446 0 : basegfx::B2DPolyPolygon aPP;
447 0 : const SdrObject* pNext = aIter.Next();
448 :
449 0 : if ( pNext->ISA( SdrPathObj ) )
450 : {
451 0 : aPP = ((SdrPathObj*)pNext)->GetPathPoly();
452 : }
453 : else
454 : {
455 0 : pNewObj = pNext->ConvertToPolyObj( false, false );
456 0 : SdrPathObj* pPath = PTR_CAST( SdrPathObj, pNewObj );
457 0 : if ( pPath )
458 0 : aPP = pPath->GetPathPoly();
459 : }
460 :
461 0 : if ( aPP.count() )
462 0 : aPolyPolygon.append(aPP);
463 :
464 0 : SdrObject::Free( pNewObj );
465 0 : }
466 0 : SdrObject::Free( pObj );
467 : basegfx::unotools::b2DPolyPolygonToPolyPolygonBezier( aPolyPolygon,
468 0 : aPolyPolygonBezierCoords );
469 0 : }
470 : }
471 :
472 0 : return aPolyPolygonBezierCoords;
473 : }
474 :
475 486 : Sequence< Reference< drawing::XCustomShapeHandle > > SAL_CALL EnhancedCustomShapeEngine::getInteraction()
476 : throw ( RuntimeException, std::exception )
477 : {
478 486 : sal_uInt32 i, nHdlCount = 0;
479 486 : SdrObject* pSdrObjCustomShape = GetSdrObjectFromXShape( mxShape );
480 486 : if ( pSdrObjCustomShape )
481 : {
482 486 : EnhancedCustomShape2d aCustomShape2d( pSdrObjCustomShape );
483 486 : nHdlCount = aCustomShape2d.GetHdlCount();
484 : }
485 486 : Sequence< Reference< drawing::XCustomShapeHandle > > aSeq( nHdlCount );
486 509 : for ( i = 0; i < nHdlCount; i++ )
487 23 : aSeq[ i ] = new EnhancedCustomShapeHandle( mxShape, i );
488 486 : return aSeq;
489 : }
490 :
491 : }
492 :
493 : extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface * SAL_CALL
494 2560 : com_sun_star_drawing_EnhancedCustomShapeEngine_get_implementation(
495 : css::uno::XComponentContext *,
496 : css::uno::Sequence<css::uno::Any> const &)
497 : {
498 2560 : return cppu::acquire(new EnhancedCustomShapeEngine);
499 : }
500 :
501 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
