Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <unotools/localisationoptions.hxx>
21 : #include <unotools/configmgr.hxx>
22 : #include <unotools/configitem.hxx>
23 : #include <tools/debug.hxx>
24 : #include <com/sun/star/uno/Any.hxx>
25 : #include <com/sun/star/uno/Sequence.hxx>
26 :
27 : #include "itemholder1.hxx"
28 :
29 : using namespace ::utl;
30 : using namespace ::rtl;
31 : using namespace ::osl;
32 : using namespace ::com::sun::star::uno;
33 :
34 : #define ROOTNODE_LOCALISATION OUString("Office.Common/View/Localisation")
35 : #define DEFAULT_AUTOMNEMONIC false
36 : #define DEFAULT_DIALOGSCALE 0
37 :
38 : #define PROPERTYNAME_AUTOMNEMONIC OUString("AutoMnemonic")
39 : #define PROPERTYNAME_DIALOGSCALE OUString("DialogScale")
40 :
41 : #define PROPERTYHANDLE_AUTOMNEMONIC 0
42 : #define PROPERTYHANDLE_DIALOGSCALE 1
43 :
44 : #define PROPERTYCOUNT 2
45 :
46 : class SvtLocalisationOptions_Impl : public ConfigItem
47 : {
48 : public:
49 :
50 : SvtLocalisationOptions_Impl();
51 : virtual ~SvtLocalisationOptions_Impl();
52 :
53 : /*-****************************************************************************************************
54 : @short called for notify of configmanager
55 : @descr These method is called from the ConfigManager before application ends or from the
56 : PropertyChangeListener if the sub tree broadcasts changes. You must update your
57 : internal values.
58 :
59 : @seealso baseclass ConfigItem
60 :
61 : @param "seqPropertyNames" is the list of properties which should be updated.
62 : *//*-*****************************************************************************************************/
63 :
64 : virtual void Notify( const Sequence< OUString >& seqPropertyNames ) SAL_OVERRIDE;
65 :
66 : /*-****************************************************************************************************
67 : @short write changes to configuration
68 : @descr These method writes the changed values into the sub tree
69 : and should always called in our destructor to guarantee consistency of config data.
70 :
71 : @seealso baseclass ConfigItem
72 : *//*-*****************************************************************************************************/
73 :
74 : virtual void Commit() SAL_OVERRIDE;
75 :
76 : /*-****************************************************************************************************
77 : @short access method to get internal values
78 : @descr These method give us a chance to regulate acces to our internal values.
79 : It's not used in the moment - but it's possible for the feature!
80 : *//*-*****************************************************************************************************/
81 :
82 : bool IsAutoMnemonic ( ) const;
83 : sal_Int32 GetDialogScale ( ) const;
84 :
85 : private:
86 :
87 : /*-****************************************************************************************************
88 : @short return list of key names of our configuration management which represent oue module tree
89 : @descr These methods return a static const list of key names. We need it to get needed values from our
90 : configuration management.
91 : @return A list of needed configuration keys is returned.
92 : *//*-*****************************************************************************************************/
93 :
94 : static Sequence< OUString > GetPropertyNames();
95 :
96 : private:
97 :
98 : bool m_bAutoMnemonic;
99 : sal_Int32 m_nDialogScale;
100 : };
101 :
102 : // constructor
103 :
104 143 : SvtLocalisationOptions_Impl::SvtLocalisationOptions_Impl()
105 : // Init baseclasses first
106 : : ConfigItem ( ROOTNODE_LOCALISATION )
107 : // Init member then.
108 : , m_bAutoMnemonic ( DEFAULT_AUTOMNEMONIC )
109 143 : , m_nDialogScale ( DEFAULT_DIALOGSCALE )
110 : {
111 : // Use our static list of configuration keys to get his values.
112 143 : Sequence< OUString > seqNames = GetPropertyNames ( );
113 286 : Sequence< Any > seqValues = GetProperties ( seqNames );
114 :
115 : // Safe impossible cases.
116 : // We need values from ALL configuration keys.
117 : // Follow assignment use order of values in relation to our list of key names!
118 : DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtLocalisationOptions_Impl::SvtLocalisationOptions_Impl()\nI miss some values of configuration keys!\n" );
119 :
120 : // Copy values from list in right order to our internal member.
121 143 : sal_Int32 nPropertyCount = seqValues.getLength();
122 429 : for( sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty )
123 : {
124 286 : if (!seqValues[nProperty].hasValue())
125 0 : continue;
126 286 : switch( nProperty )
127 : {
128 : case PROPERTYHANDLE_AUTOMNEMONIC : {
129 : DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtLocalisationOptions_Impl::SvtLocalisationOptions_Impl()\nWho has changed the value type of \"Office.Common\\View\\Localisation\\AutoMnemonic\"?" );
130 143 : seqValues[nProperty] >>= m_bAutoMnemonic;
131 : }
132 143 : break;
133 :
134 : case PROPERTYHANDLE_DIALOGSCALE : {
135 : DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtLocalisationOptions_Impl::SvtLocalisationOptions_Impl()\nWho has changed the value type of \"Office.Common\\View\\Localisation\\DialogScale\"?" );
136 143 : seqValues[nProperty] >>= m_nDialogScale;
137 : }
138 143 : break;
139 : }
140 : }
141 :
142 : // Enable notification mechanism of our baseclass.
143 : // We need it to get information about changes outside these class on our used configuration keys!
144 286 : EnableNotification( seqNames );
145 143 : }
146 :
147 : // destructor
148 :
149 426 : SvtLocalisationOptions_Impl::~SvtLocalisationOptions_Impl()
150 : {
151 : // We must save our current values .. if user forget it!
152 142 : if( IsModified() )
153 : {
154 0 : Commit();
155 : }
156 284 : }
157 :
158 : // public method
159 :
160 0 : void SvtLocalisationOptions_Impl::Notify( const Sequence< OUString >& seqPropertyNames )
161 : {
162 : // Use given list of updated properties to get his values from configuration directly!
163 0 : Sequence< Any > seqValues = GetProperties( seqPropertyNames );
164 : // Safe impossible cases.
165 : // We need values from ALL notified configuration keys.
166 : DBG_ASSERT( !(seqPropertyNames.getLength()!=seqValues.getLength()), "SvtLocalisationOptions_Impl::Notify()\nI miss some values of configuration keys!\n" );
167 : // Step over list of property names and get right value from coreesponding value list to set it on internal members!
168 0 : sal_Int32 nCount = seqPropertyNames.getLength();
169 0 : for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty )
170 : {
171 0 : if( seqPropertyNames[nProperty] == PROPERTYNAME_AUTOMNEMONIC )
172 : {
173 : DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtLocalisationOptions_Impl::SvtLocalisationOptions_Impl()\nWho has changed the value type of \"Office.Common\\View\\Localisation\\AutoMnemonic\"?" );
174 0 : seqValues[nProperty] >>= m_bAutoMnemonic;
175 : }
176 : else
177 0 : if( seqPropertyNames[nProperty] == PROPERTYNAME_DIALOGSCALE )
178 : {
179 : DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtLocalisationOptions_Impl::SvtLocalisationOptions_Impl()\nWho has changed the value type of \"Office.Common\\View\\Localisation\\DialogScale\"?" );
180 0 : seqValues[nProperty] >>= m_nDialogScale;
181 : }
182 : #if OSL_DEBUG_LEVEL > 1
183 : else DBG_ASSERT( sal_False, "SvtLocalisationOptions_Impl::Notify()\nUnknown property detected ... I can't handle these!\n" );
184 : #endif
185 : }
186 :
187 0 : NotifyListeners(0);
188 0 : }
189 :
190 : // public method
191 :
192 0 : void SvtLocalisationOptions_Impl::Commit()
193 : {
194 : // Get names of supported properties, create a list for values and copy current values to it.
195 0 : Sequence< OUString > seqNames = GetPropertyNames ();
196 0 : sal_Int32 nCount = seqNames.getLength();
197 0 : Sequence< Any > seqValues ( nCount );
198 0 : for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty )
199 : {
200 0 : switch( nProperty )
201 : {
202 : case PROPERTYHANDLE_AUTOMNEMONIC : {
203 0 : seqValues[nProperty] <<= m_bAutoMnemonic;
204 : }
205 0 : break;
206 :
207 : case PROPERTYHANDLE_DIALOGSCALE : {
208 0 : seqValues[nProperty] <<= m_nDialogScale;
209 : }
210 0 : break;
211 : }
212 : }
213 : // Set properties in configuration.
214 0 : PutProperties( seqNames, seqValues );
215 0 : }
216 :
217 : // public method
218 :
219 143 : bool SvtLocalisationOptions_Impl::IsAutoMnemonic() const
220 : {
221 143 : return m_bAutoMnemonic;
222 : }
223 :
224 : // public method
225 :
226 143 : sal_Int32 SvtLocalisationOptions_Impl::GetDialogScale() const
227 : {
228 143 : return m_nDialogScale;
229 : }
230 :
231 143 : Sequence< OUString > SvtLocalisationOptions_Impl::GetPropertyNames()
232 : {
233 : // Build static list of configuration key names.
234 : const OUString aProperties[] =
235 : {
236 : PROPERTYNAME_AUTOMNEMONIC ,
237 : PROPERTYNAME_DIALOGSCALE ,
238 429 : };
239 : // Initialize return sequence with these list ...
240 143 : Sequence< OUString > seqPropertyNames(aProperties, PROPERTYCOUNT);
241 : // ... and return it.
242 429 : return seqPropertyNames;
243 : }
244 :
245 : // initialize static member
246 : // DON'T DO IT IN YOUR HEADER!
247 : // see definition for further information
248 :
249 : SvtLocalisationOptions_Impl* SvtLocalisationOptions::m_pDataContainer = NULL;
250 : sal_Int32 SvtLocalisationOptions::m_nRefCount = 0;
251 :
252 : // constructor
253 :
254 286 : SvtLocalisationOptions::SvtLocalisationOptions()
255 : {
256 : // Global access, must be guarded (multithreading!).
257 286 : MutexGuard aGuard( GetOwnStaticMutex() );
258 : // Increase our refcount ...
259 286 : ++m_nRefCount;
260 : // ... and initialize our data container only if it not already exist!
261 286 : if( m_pDataContainer == NULL )
262 : {
263 143 : m_pDataContainer = new SvtLocalisationOptions_Impl;
264 :
265 143 : ItemHolder1::holdConfigItem(E_LOCALISATIONOPTIONS);
266 286 : }
267 286 : }
268 :
269 : // destructor
270 :
271 712 : SvtLocalisationOptions::~SvtLocalisationOptions()
272 : {
273 : // Global access, must be guarded (multithreading!)
274 285 : MutexGuard aGuard( GetOwnStaticMutex() );
275 : // Decrease our refcount.
276 285 : --m_nRefCount;
277 : // If last instance was deleted ...
278 : // we must destroy our static data container!
279 285 : if( m_nRefCount <= 0 )
280 : {
281 142 : delete m_pDataContainer;
282 142 : m_pDataContainer = NULL;
283 285 : }
284 427 : }
285 :
286 : // public method
287 :
288 143 : bool SvtLocalisationOptions::IsAutoMnemonic() const
289 : {
290 143 : MutexGuard aGuard( GetOwnStaticMutex() );
291 143 : return m_pDataContainer->IsAutoMnemonic();
292 : }
293 :
294 : // public method
295 :
296 143 : sal_Int32 SvtLocalisationOptions::GetDialogScale() const
297 : {
298 143 : MutexGuard aGuard( GetOwnStaticMutex() );
299 143 : return m_pDataContainer->GetDialogScale();
300 : }
301 :
302 : namespace
303 : {
304 : class theLocalisationOptionsMutex : public rtl::Static<osl::Mutex, theLocalisationOptionsMutex>{};
305 : }
306 :
307 : // private method
308 :
309 857 : Mutex& SvtLocalisationOptions::GetOwnStaticMutex()
310 : {
311 857 : return theLocalisationOptionsMutex::get();
312 : }
313 :
314 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
