Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "Clipping.hxx"
21 : #include "CommonConverters.hxx"
22 : #include "BaseGFXHelper.hxx"
23 :
24 : #include <com/sun/star/drawing/Position3D.hpp>
25 : #include <com/sun/star/drawing/DoubleSequence.hpp>
26 :
27 : namespace chart
28 : {
29 : using namespace ::com::sun::star;
30 : using ::basegfx::B2DRectangle;
31 : using ::basegfx::B2DTuple;
32 :
33 : namespace{
34 : /** @descr This is a supporting function for lcl_clip2d. It computes a new parametric
35 : value for an entering (dTE) or leaving (dTL) intersection point with one
36 : of the edges bounding the clipping area.
37 : For explanation of the parameters please refer to :
38 :
39 : Liang-Biarsky parametric line-clipping algorithm as described in:
40 : Computer Graphics: principles and practice, 2nd ed.,
41 : James D. Foley et al.,
42 : Section 3.12.4 on page 117.
43 : */
44 0 : bool lcl_CLIPt(double fDenom,double fNum, double & fTE, double & fTL)
45 : {
46 : double fT;
47 :
48 0 : if (fDenom > 0) // Intersection enters: PE
49 : {
50 0 : fT = fNum / fDenom; // Parametric value at the intersection.
51 0 : if (fT > fTL) // fTE and fTL crossover
52 0 : return false; // therefore reject the line.
53 0 : else if (fT > fTE) // A new fTE has been found.
54 0 : fTE = fT;
55 : }
56 0 : else if (fDenom < 0) // Intersection leaves: PL
57 : {
58 0 : fT = fNum / fDenom; // Parametric Value at the intersection.
59 0 : if (fT < fTE) // fTE and fTL crossover
60 0 : return false; // therefore reject the line.
61 0 : else if (fT < fTL) // A new fTL has been found.
62 0 : fTL = fT;
63 : }
64 0 : else if (fNum > 0)
65 0 : return false; // Line lies on the outside of the edge.
66 :
67 0 : return true;
68 : }
69 :
70 : /** @descr The line given by it's two endpoints rP0 and rP1 is clipped at the rectangle
71 : rRectangle. If there is at least a part of it visible then sal_True is returned and
72 : the endpoints of that part are stored in rP0 and rP1. The points rP0 and rP1
73 : may have the same coordinates.
74 : @param rP0 Start point of the line to clip. Modified to contain a start point inside
75 : the clipping area if possible.
76 : @param rP1 End point of the line to clip. Modified to contain an end point inside
77 : the clipping area if possible.
78 : @param rRectangle Clipping area.
79 : @return If the line lies completely or partly inside the clipping area then TRUE
80 : is returned. If the line lies completely outside then sal_False is returned and rP0 and
81 : rP1 are left unmodified.
82 : */
83 0 : bool lcl_clip2d(B2DTuple& rPoint0, B2DTuple& rPoint1, const B2DRectangle& rRectangle)
84 : {
85 : //Direction vector of the line.
86 0 : B2DTuple aDirection = rPoint1 - rPoint0;
87 :
88 0 : if( aDirection.getX()==0 && aDirection.getY()==0 && rRectangle.isInside(rPoint0) )
89 : {
90 : // Degenerate case of a zero length line.
91 0 : return true;
92 : }
93 : else
94 : {
95 : // Values of the line parameter where the line enters resp. leaves the rectangle.
96 0 : double fTE = 0,
97 0 : fTL = 1;
98 :
99 : // Test whether at least a part lies in the four half-planes with respect to
100 : // the rectangles four edges.
101 0 : if( lcl_CLIPt(aDirection.getX(), rRectangle.getMinX() - rPoint0.getX(), fTE, fTL) )
102 0 : if( lcl_CLIPt(-aDirection.getX(), rPoint0.getX() - rRectangle.getMaxX(), fTE, fTL) )
103 0 : if( lcl_CLIPt(aDirection.getY(), rRectangle.getMinY() - rPoint0.getY(), fTE, fTL) )
104 0 : if( lcl_CLIPt(-aDirection.getY(), rPoint0.getY() - rRectangle.getMaxY(), fTE, fTL) )
105 : {
106 : // At least a part is visible.
107 0 : if (fTL < 1)
108 : {
109 : // Compute the new end point.
110 0 : rPoint1.setX( rPoint0.getX() + fTL * aDirection.getX() );
111 0 : rPoint1.setY( rPoint0.getY() + fTL * aDirection.getY() );
112 : }
113 0 : if (fTE > 0)
114 : {
115 : // Compute the new starting point.
116 0 : rPoint0.setX( rPoint0.getX() + fTE * aDirection.getX() );
117 0 : rPoint0.setY( rPoint0.getY() + fTE * aDirection.getY() );
118 : }
119 0 : return true;
120 : }
121 :
122 : // Line is not visible.
123 0 : return false;
124 0 : }
125 : }
126 :
127 0 : bool lcl_clip2d_(drawing::Position3D& rPoint0, drawing::Position3D& rPoint1, const B2DRectangle& rRectangle)
128 : {
129 0 : B2DTuple aP0(rPoint0.PositionX,rPoint0.PositionY);
130 0 : B2DTuple aP1(rPoint1.PositionX,rPoint1.PositionY);
131 0 : bool bRet = lcl_clip2d( aP0, aP1, rRectangle );
132 :
133 0 : rPoint0.PositionX = aP0.getX();
134 0 : rPoint0.PositionY = aP0.getY();
135 0 : rPoint1.PositionX = aP1.getX();
136 0 : rPoint1.PositionY = aP1.getY();
137 :
138 0 : return bRet;
139 : }
140 :
141 0 : void lcl_addPointToPoly( drawing::PolyPolygonShape3D& rPoly
142 : , const drawing::Position3D& rPos
143 : , sal_Int32 nPolygonIndex
144 : , std::vector< sal_Int32 >& rResultPointCount
145 : , sal_Int32 nReservePointCount )
146 : {
147 0 : if(nPolygonIndex<0)
148 : {
149 : OSL_FAIL( "The polygon index needs to be > 0");
150 0 : nPolygonIndex=0;
151 : }
152 :
153 : //make sure that we have enough polygons
154 0 : if(nPolygonIndex >= rPoly.SequenceX.getLength() )
155 : {
156 0 : rPoly.SequenceX.realloc(nPolygonIndex+1);
157 0 : rPoly.SequenceY.realloc(nPolygonIndex+1);
158 0 : rPoly.SequenceZ.realloc(nPolygonIndex+1);
159 0 : rResultPointCount.resize(nPolygonIndex+1,0);
160 : }
161 :
162 0 : drawing::DoubleSequence* pOuterSequenceX = &rPoly.SequenceX.getArray()[nPolygonIndex];
163 0 : drawing::DoubleSequence* pOuterSequenceY = &rPoly.SequenceY.getArray()[nPolygonIndex];
164 0 : drawing::DoubleSequence* pOuterSequenceZ = &rPoly.SequenceZ.getArray()[nPolygonIndex];
165 :
166 0 : sal_Int32 nNewResultPointCount = rResultPointCount[nPolygonIndex]+1;
167 0 : sal_Int32 nSeqLength = pOuterSequenceX->getLength();
168 :
169 0 : if( nSeqLength <= nNewResultPointCount )
170 : {
171 0 : sal_Int32 nReallocLength = nReservePointCount;
172 0 : if( nNewResultPointCount > nReallocLength )
173 : {
174 0 : nReallocLength = nNewResultPointCount;
175 : OSL_FAIL("this should not be the case to avoid performance problems");
176 : }
177 0 : pOuterSequenceX->realloc(nReallocLength);
178 0 : pOuterSequenceY->realloc(nReallocLength);
179 0 : pOuterSequenceZ->realloc(nReallocLength);
180 : }
181 :
182 0 : double* pInnerSequenceX = pOuterSequenceX->getArray();
183 0 : double* pInnerSequenceY = pOuterSequenceY->getArray();
184 0 : double* pInnerSequenceZ = pOuterSequenceZ->getArray();
185 :
186 0 : pInnerSequenceX[nNewResultPointCount-1] = rPos.PositionX;
187 0 : pInnerSequenceY[nNewResultPointCount-1] = rPos.PositionY;
188 0 : pInnerSequenceZ[nNewResultPointCount-1] = rPos.PositionZ;
189 0 : rResultPointCount[nPolygonIndex]=nNewResultPointCount;
190 0 : }
191 :
192 : }//end anonymous namespace
193 :
194 0 : void Clipping::clipPolygonAtRectangle( const drawing::PolyPolygonShape3D& rPolygon
195 : , const B2DRectangle& rRectangle
196 : , drawing::PolyPolygonShape3D& aResult
197 : , bool bSplitPiecesToDifferentPolygons )
198 : {
199 0 : aResult.SequenceX.realloc(0);
200 0 : aResult.SequenceY.realloc(0);
201 0 : aResult.SequenceZ.realloc(0);
202 :
203 0 : if(!rPolygon.SequenceX.getLength())
204 0 : return;
205 :
206 : //need clipping?:
207 : {
208 0 : ::basegfx::B3DRange a3DRange( BaseGFXHelper::getBoundVolume( rPolygon ) );
209 0 : ::basegfx::B2DRange a2DRange( a3DRange.getMinX(), a3DRange.getMinY(), a3DRange.getMaxX(), a3DRange.getMaxY() );
210 0 : if( rRectangle.isInside( a2DRange ) )
211 : {
212 0 : aResult = rPolygon;
213 0 : return;
214 : }
215 : else
216 : {
217 0 : a2DRange.intersect( rRectangle );
218 0 : if( a2DRange.isEmpty() )
219 0 : return;
220 : }
221 : }
222 :
223 :
224 0 : std::vector< sal_Int32 > aResultPointCount;//per polygon index
225 :
226 : //apply clipping:
227 0 : drawing::Position3D aFrom;
228 0 : drawing::Position3D aTo;
229 :
230 0 : sal_Int32 nNewPolyIndex = 0;
231 0 : sal_Int32 nOldPolyCount = rPolygon.SequenceX.getLength();
232 0 : for(sal_Int32 nOldPolyIndex=0; nOldPolyIndex<nOldPolyCount; nOldPolyIndex++, nNewPolyIndex++ )
233 : {
234 0 : sal_Int32 nOldPointCount = rPolygon.SequenceX[nOldPolyIndex].getLength();
235 :
236 : // set last point to a position outside the rectangle, such that the first
237 : // time lcl_clip2d returns true, the comparison to last will always yield false
238 0 : drawing::Position3D aLast(rRectangle.getMinX()-1.0,rRectangle.getMinY()-1.0, 0.0 );
239 :
240 0 : for(sal_Int32 nOldPoint=1; nOldPoint<nOldPointCount; nOldPoint++)
241 : {
242 0 : aFrom = getPointFromPoly(rPolygon,nOldPoint-1,nOldPolyIndex);
243 0 : aTo = getPointFromPoly(rPolygon,nOldPoint,nOldPolyIndex);
244 0 : if( lcl_clip2d_(aFrom, aTo, rRectangle) )
245 : {
246 : // compose an Polygon of as many consecutive points as possible
247 0 : if(aFrom == aLast)
248 : {
249 0 : if( !(aTo==aFrom) )
250 : {
251 0 : lcl_addPointToPoly( aResult, aTo, nNewPolyIndex, aResultPointCount, nOldPointCount );
252 : }
253 : }
254 : else
255 : {
256 0 : if( bSplitPiecesToDifferentPolygons && nOldPoint!=1 )
257 : {
258 0 : if( nNewPolyIndex < aResult.SequenceX.getLength()
259 0 : && aResultPointCount[nNewPolyIndex]>0 )
260 0 : nNewPolyIndex++;
261 : }
262 0 : lcl_addPointToPoly( aResult, aFrom, nNewPolyIndex, aResultPointCount, nOldPointCount );
263 0 : if( !(aTo==aFrom) )
264 0 : lcl_addPointToPoly( aResult, aTo, nNewPolyIndex, aResultPointCount, nOldPointCount );
265 : }
266 0 : aLast = aTo;
267 : }
268 : }
269 : }
270 : //free unused space
271 0 : for( sal_Int32 nPolygonIndex = aResultPointCount.size(); nPolygonIndex--; )
272 : {
273 0 : drawing::DoubleSequence* pOuterSequenceX = &aResult.SequenceX.getArray()[nPolygonIndex];
274 0 : drawing::DoubleSequence* pOuterSequenceY = &aResult.SequenceY.getArray()[nPolygonIndex];
275 0 : drawing::DoubleSequence* pOuterSequenceZ = &aResult.SequenceZ.getArray()[nPolygonIndex];
276 :
277 0 : sal_Int32 nUsedPointCount = aResultPointCount[nPolygonIndex];
278 0 : pOuterSequenceX->realloc(nUsedPointCount);
279 0 : pOuterSequenceY->realloc(nUsedPointCount);
280 0 : pOuterSequenceZ->realloc(nUsedPointCount);
281 0 : }
282 : }
283 :
284 : } //namespace chart
285 :
286 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
