Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <svx/unoshape.hxx>
21 : #include "OpenglShapeFactory.hxx"
22 : #include "DummyXShape.hxx"
23 : #include "ViewDefines.hxx"
24 : #include "Stripe.hxx"
25 : #include "CommonConverters.hxx"
26 : #include "macros.hxx"
27 : #include "PropertyMapper.hxx"
28 : #include <comphelper/InlineContainer.hxx>
29 : #include <com/sun/star/beans/XPropertySet.hpp>
30 : #include <com/sun/star/drawing/CircleKind.hpp>
31 : #include <com/sun/star/drawing/DoubleSequence.hpp>
32 : #include <com/sun/star/drawing/FlagSequence.hpp>
33 : #include <com/sun/star/drawing/FillStyle.hpp>
34 : #include <com/sun/star/drawing/LineStyle.hpp>
35 : #include <com/sun/star/drawing/NormalsKind.hpp>
36 : #include <com/sun/star/drawing/PointSequence.hpp>
37 : #include <com/sun/star/drawing/PolygonKind.hpp>
38 : #include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
39 : #include <com/sun/star/drawing/ProjectionMode.hpp>
40 : #include <com/sun/star/drawing/ShadeMode.hpp>
41 : #include <com/sun/star/drawing/TextFitToSizeType.hpp>
42 : #include <com/sun/star/drawing/TextureProjectionMode.hpp>
43 : #include <com/sun/star/text/XText.hpp>
44 : #include <com/sun/star/uno/Any.hxx>
45 :
46 : #include <editeng/unoprnms.hxx>
47 : #include <rtl/math.hxx>
48 : #include <svx/svdocirc.hxx>
49 : #include <svx/svdopath.hxx>
50 :
51 : #include <basegfx/point/b2dpoint.hxx>
52 : #include <basegfx/matrix/b3dhommatrix.hxx>
53 :
54 : #include "RelativeSizeHelper.hxx"
55 :
56 : #include <algorithm>
57 : #include <iostream>
58 : using namespace std;
59 :
60 :
61 : using namespace ::com::sun::star;
62 : using ::com::sun::star::uno::Reference;
63 :
64 : namespace chart
65 : {
66 :
67 : extern "C" {
68 0 : SAL_DLLPUBLIC_EXPORT opengl::OpenglShapeFactory* getOpenglShapeFactory()
69 0 : { return new opengl::OpenglShapeFactory();}
70 : }
71 :
72 :
73 : using dummy::DummyXShape;
74 : using dummy::DummyXShapes;
75 : using dummy::DummyCylinder;
76 : using dummy::DummyRectangle;
77 : using dummy::DummyPyramid;
78 : using dummy::DummyCone;
79 :
80 : namespace opengl {
81 :
82 : namespace {
83 :
84 0 : uno::Reference< drawing::XShapes > getChartShape(
85 : const uno::Reference< drawing::XDrawPage>& xDrawPage )
86 : {
87 0 : uno::Reference< drawing::XShapes > xRet;
88 0 : uno::Reference< drawing::XShapes > xShapes( xDrawPage, uno::UNO_QUERY );
89 0 : if( xShapes.is() )
90 : {
91 0 : sal_Int32 nCount = xShapes->getCount();
92 0 : uno::Reference< drawing::XShape > xShape;
93 0 : for( sal_Int32 nN = nCount; nN--; )
94 : {
95 0 : if( xShapes->getByIndex( nN ) >>= xShape )
96 : {
97 :
98 0 : OUString aRet;
99 :
100 0 : uno::Reference< beans::XPropertySet > xProp( xShape, uno::UNO_QUERY );
101 0 : xProp->getPropertyValue( UNO_NAME_MISC_OBJ_NAME ) >>= aRet;
102 0 : if( aRet.equals("com.sun.star.chart2.shapes") )
103 : {
104 0 : xRet = dynamic_cast<SvxDummyShapeContainer*>(xShape.get())->getWrappedShape();
105 0 : break;
106 0 : }
107 : }
108 0 : }
109 : }
110 0 : return xRet;
111 : }
112 :
113 : }
114 :
115 0 : uno::Reference< drawing::XShapes > OpenglShapeFactory::getOrCreateChartRootShape(
116 : const uno::Reference< drawing::XDrawPage>& xDrawPage )
117 : {
118 0 : uno::Reference< drawing::XShapes > xRet( getChartShape( xDrawPage ) );
119 0 : if( !xRet.is() )
120 : {
121 : //create the root shape
122 : SAL_WARN("chart2.opengl", "getOrCreateChartRootShape");
123 :
124 0 : uno::Reference< drawing::XShape > xTarget (m_xShapeFactory->createInstance(
125 0 : "com.sun.star.drawing.OpenGLObject" ), uno::UNO_QUERY );
126 0 : dummy::DummyChart *pChart = new dummy::DummyChart(xTarget);
127 0 : SvxDummyShapeContainer* pContainer = new SvxDummyShapeContainer(pChart);
128 0 : pContainer->setSize(awt::Size(0,0));
129 0 : xRet = pChart;
130 0 : xDrawPage->add(xTarget);
131 0 : xDrawPage->add(pContainer);
132 : }
133 0 : return xRet;
134 : }
135 :
136 0 : void OpenglShapeFactory::setPageSize( uno::Reference < drawing::XShapes > xChartShapes, const awt::Size& rSize )
137 : {
138 0 : uno::Reference< drawing::XShape > xShape(xChartShapes, uno::UNO_QUERY_THROW);
139 0 : xShape->setSize(rSize);
140 0 : }
141 :
142 : // methods for 3D shape creation
143 :
144 : uno::Reference<drawing::XShape>
145 0 : OpenglShapeFactory::createCube(
146 : const uno::Reference<drawing::XShapes>& xTarget
147 : , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize
148 : , sal_Int32
149 : , const uno::Reference< beans::XPropertySet >& xSourceProp
150 : , const tPropertyNameMap& rPropertyNameMap
151 : , bool )
152 : {
153 : dummy::DummyCube* pCube = new dummy::DummyCube(rPosition, rSize,
154 : xSourceProp,
155 0 : rPropertyNameMap);
156 0 : xTarget->add(pCube);
157 0 : return pCube;
158 : }
159 :
160 : uno::Reference<drawing::XShape>
161 0 : OpenglShapeFactory::createCylinder(
162 : const uno::Reference<drawing::XShapes>& xTarget
163 : , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize
164 : , sal_Int32 )
165 : {
166 0 : dummy::DummyCylinder* pCylinder = new dummy::DummyCylinder( rPosition, rSize );
167 0 : xTarget->add(pCylinder);
168 0 : return pCylinder;
169 : }
170 :
171 : uno::Reference<drawing::XShape>
172 0 : OpenglShapeFactory::createPyramid(
173 : const uno::Reference<drawing::XShapes>& xTarget
174 : , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize
175 : , double, bool
176 : , const uno::Reference< beans::XPropertySet >& xSourceProp
177 : , const tPropertyNameMap& rPropertyNameMap )
178 : {
179 : dummy::DummyPyramid* pPyramid = new dummy::DummyPyramid(rPosition, rSize,
180 0 : xSourceProp, rPropertyNameMap );
181 0 : xTarget->add(pPyramid);
182 0 : return pPyramid;
183 : }
184 :
185 : uno::Reference<drawing::XShape>
186 0 : OpenglShapeFactory::createCone(
187 : const uno::Reference<drawing::XShapes>& xTarget
188 : , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize
189 : , double, sal_Int32 )
190 : {
191 0 : dummy::DummyCone* pCone = new dummy::DummyCone(rPosition, rSize);
192 0 : xTarget->add(pCone);
193 0 : return pCone;
194 : }
195 :
196 : uno::Reference< drawing::XShape >
197 0 : OpenglShapeFactory::createPieSegment2D(
198 : const uno::Reference< drawing::XShapes >& xTarget
199 : , double fUnitCircleStartAngleDegree, double fUnitCircleWidthAngleDegree
200 : , double fUnitCircleInnerRadius, double fUnitCircleOuterRadius
201 : , const drawing::Direction3D& rOffset
202 : , const drawing::HomogenMatrix& rUnitCircleToScene )
203 : {
204 : dummy::DummyPieSegment2D* pSegment = new dummy::DummyPieSegment2D(fUnitCircleStartAngleDegree,
205 : fUnitCircleWidthAngleDegree, fUnitCircleInnerRadius, fUnitCircleOuterRadius,
206 0 : rOffset, rUnitCircleToScene);
207 0 : xTarget->add(pSegment);
208 0 : return pSegment;
209 : }
210 :
211 : uno::Reference< drawing::XShape >
212 0 : OpenglShapeFactory::createPieSegment(
213 : const uno::Reference< drawing::XShapes >& xTarget
214 : , double, double
215 : , double, double
216 : , const drawing::Direction3D& rOffset
217 : , const drawing::HomogenMatrix& rUnitCircleToScene
218 : , double )
219 : {
220 : dummy::DummyPieSegment* pSegment = new dummy::DummyPieSegment(
221 0 : rOffset, rUnitCircleToScene);
222 :
223 0 : xTarget->add(pSegment);
224 0 : return pSegment;
225 : }
226 :
227 : uno::Reference< drawing::XShape >
228 0 : OpenglShapeFactory::createStripe( const uno::Reference< drawing::XShapes >& xTarget
229 : , const Stripe& rStripe
230 : , const uno::Reference< beans::XPropertySet >& xSourceProp
231 : , const tPropertyNameMap& rPropertyNameMap
232 : , sal_Bool
233 : , short
234 : , bool )
235 : {
236 : dummy::DummyStripe* pStripe = new dummy::DummyStripe(rStripe,
237 0 : xSourceProp, rPropertyNameMap);
238 0 : xTarget->add(pStripe);
239 0 : return pStripe;
240 : }
241 :
242 : uno::Reference< drawing::XShape >
243 0 : OpenglShapeFactory::createArea3D( const uno::Reference< drawing::XShapes >& xTarget
244 : , const drawing::PolyPolygonShape3D& rPolyPolygon
245 : , double )
246 : {
247 0 : dummy::DummyArea3D* pArea = new dummy::DummyArea3D(rPolyPolygon);
248 0 : xTarget->add(pArea);
249 0 : return pArea;
250 : }
251 :
252 : uno::Reference< drawing::XShape >
253 0 : OpenglShapeFactory::createArea2D( const uno::Reference< drawing::XShapes >& xTarget
254 : , const drawing::PolyPolygonShape3D& rPolyPolygon )
255 : {
256 0 : dummy::DummyArea2D* pArea = new dummy::DummyArea2D(PolyToPointSequence(rPolyPolygon));
257 0 : xTarget->add(pArea);
258 0 : return pArea;
259 : }
260 :
261 : uno::Reference< drawing::XShape >
262 0 : OpenglShapeFactory::createSymbol2D(
263 : const uno::Reference< drawing::XShapes >& xTarget
264 : , const drawing::Position3D& rPosition
265 : , const drawing::Direction3D& rSize
266 : , sal_Int32 nStandardSymbol
267 : , sal_Int32
268 : , sal_Int32 nFillColor )
269 : {
270 : dummy::DummySymbol2D* pSymbol = new dummy::DummySymbol2D(rPosition, rSize,
271 0 : nStandardSymbol, nFillColor);
272 0 : xTarget->add(pSymbol);
273 0 : return pSymbol;
274 : }
275 :
276 : uno::Reference< drawing::XShape >
277 0 : OpenglShapeFactory::createGraphic2D(
278 : const uno::Reference< drawing::XShapes >& xTarget
279 : , const drawing::Position3D& rPosition
280 : , const drawing::Direction3D& rSize
281 : , const uno::Reference< graphic::XGraphic >& xGraphic )
282 : {
283 : dummy::DummyGraphic2D* pGraphic = new dummy::DummyGraphic2D(rPosition, rSize,
284 0 : xGraphic);
285 0 : xTarget->add(pGraphic);
286 0 : return pGraphic;
287 : }
288 :
289 : uno::Reference< drawing::XShapes >
290 0 : OpenglShapeFactory::createGroup2D( const uno::Reference< drawing::XShapes >& xTarget
291 : , const OUString& aName)
292 : {
293 0 : dummy::DummyGroup2D* pNewShape = new dummy::DummyGroup2D(aName);
294 0 : xTarget->add(pNewShape);
295 0 : return pNewShape;
296 : }
297 :
298 : uno::Reference< drawing::XShapes >
299 0 : OpenglShapeFactory::createGroup3D( const uno::Reference< drawing::XShapes >& xTarget
300 : , const OUString& aName )
301 : {
302 0 : dummy::DummyGroup3D* pNewShape = new dummy::DummyGroup3D(aName);
303 0 : xTarget->add(pNewShape);
304 0 : return pNewShape;
305 : }
306 :
307 : uno::Reference< drawing::XShape >
308 0 : OpenglShapeFactory::createCircle2D( const uno::Reference< drawing::XShapes >& xTarget
309 : , const drawing::Position3D& rPosition
310 : , const drawing::Direction3D& rSize )
311 : {
312 : drawing::Position3D aCenterPosition(
313 0 : rPosition.PositionX - (rSize.DirectionX / 2.0),
314 0 : rPosition.PositionY - (rSize.DirectionY / 2.0),
315 0 : rPosition.PositionZ );
316 : dummy::DummyCircle* pCircle = new dummy::DummyCircle(Position3DToAWTPoint( aCenterPosition ),
317 0 : Direction3DToAWTSize( rSize ));
318 0 : xTarget->add(pCircle);
319 0 : return pCircle;
320 : }
321 :
322 : uno::Reference< drawing::XShape >
323 0 : OpenglShapeFactory::createCircle( const uno::Reference< drawing::XShapes >& xTarget
324 : , const awt::Size& rSize
325 : , const awt::Point& rPosition )
326 : {
327 0 : dummy::DummyCircle* pCircle = new dummy::DummyCircle(rPosition, rSize);
328 0 : xTarget->add(pCircle);
329 0 : return pCircle;
330 : }
331 :
332 : uno::Reference< drawing::XShape >
333 0 : OpenglShapeFactory::createLine3D( const uno::Reference< drawing::XShapes >& xTarget
334 : , const drawing::PolyPolygonShape3D& rPoints
335 : , const VLineProperties& rLineProperties )
336 : {
337 0 : dummy::DummyLine3D* pLine = new dummy::DummyLine3D(rPoints, rLineProperties);
338 0 : xTarget->add(pLine);
339 0 : return pLine;
340 : }
341 :
342 : uno::Reference< drawing::XShape >
343 0 : OpenglShapeFactory::createLine2D( const uno::Reference< drawing::XShapes >& xTarget
344 : , const drawing::PointSequenceSequence& rPoints
345 : , const VLineProperties* pLineProperties )
346 : {
347 0 : dummy::DummyLine2D* pLine = new dummy::DummyLine2D(rPoints, pLineProperties);
348 0 : xTarget->add(pLine);
349 :
350 0 : return pLine;
351 : }
352 :
353 : uno::Reference< drawing::XShape >
354 0 : OpenglShapeFactory::createLine ( const uno::Reference< drawing::XShapes >& xTarget,
355 : const awt::Size& rSize, const awt::Point& rPosition )
356 : {
357 0 : dummy::DummyLine2D* pLine = new dummy::DummyLine2D(rSize, rPosition);
358 0 : xTarget->add(pLine);
359 0 : return pLine;
360 : }
361 :
362 0 : uno::Reference< drawing::XShape > OpenglShapeFactory::createInvisibleRectangle(
363 : const uno::Reference< drawing::XShapes >& xTarget
364 : , const awt::Size& rSize )
365 : {
366 0 : dummy::DummyRectangle* pRectangle = new dummy::DummyRectangle(rSize);
367 0 : pRectangle->setPropertyValue("Invisible", uno::makeAny(sal_True));
368 0 : xTarget->add(pRectangle);
369 0 : return pRectangle;
370 : }
371 :
372 0 : uno::Reference< drawing::XShape > OpenglShapeFactory::createRectangle(
373 : const uno::Reference< drawing::XShapes >& xTarget,
374 : const awt::Size& rSize,
375 : const awt::Point& rPosition,
376 : const tNameSequence& rPropNames,
377 : const tAnySequence& rPropValues,
378 : StackPosition /*ePos*/ )
379 : {
380 : dummy::DummyRectangle* pRectangle = new dummy::DummyRectangle(rSize, rPosition,
381 0 : rPropNames, rPropValues);
382 :
383 : // TODO : Honor stack position.
384 0 : xTarget->add(pRectangle);
385 0 : return pRectangle;
386 : }
387 :
388 : uno::Reference< drawing::XShape >
389 0 : OpenglShapeFactory::createRectangle(
390 : const uno::Reference<
391 : drawing::XShapes >& xTarget)
392 : {
393 0 : dummy::DummyRectangle* pRectangle = new dummy::DummyRectangle();
394 0 : xTarget->add(pRectangle);
395 0 : return pRectangle;
396 : }
397 :
398 : uno::Reference< drawing::XShape >
399 0 : OpenglShapeFactory::createText( const uno::Reference< drawing::XShapes >& xTarget
400 : , const OUString& rText
401 : , const tNameSequence& rPropNames
402 : , const tAnySequence& rPropValues
403 : , const uno::Any& rATransformation )
404 : {
405 : dummy::DummyText* pText = new dummy::DummyText( rText, rPropNames, rPropValues,
406 0 : rATransformation, xTarget, 0 );
407 0 : return pText;
408 : }
409 :
410 :
411 : uno::Reference< drawing::XShape >
412 0 : OpenglShapeFactory::createText( const uno::Reference< drawing::XShapes >& xTarget,
413 : const awt::Size& , const awt::Point& rPos,
414 : uno::Sequence< uno::Reference< chart2::XFormattedString > >& rFormattedString,
415 : const uno::Reference< beans::XPropertySet > & xTextProperties,
416 : double nRotation, const OUString& rName)
417 : {
418 0 : tPropertyNameValueMap aValueMap;
419 : //fill line-, fill- and paragraph-properties into the ValueMap
420 : {
421 0 : tMakePropertyNameMap aNameMap = PropertyMapper::getPropertyNameMapForParagraphProperties();
422 0 : aNameMap( PropertyMapper::getPropertyNameMapForFillAndLineProperties() );
423 :
424 0 : PropertyMapper::getValueMap( aValueMap, aNameMap, xTextProperties );
425 : }
426 :
427 : //fill some more shape properties into the ValueMap
428 : {
429 0 : drawing::TextHorizontalAdjust eHorizontalAdjust = drawing::TextHorizontalAdjust_CENTER;
430 0 : drawing::TextVerticalAdjust eVerticalAdjust = drawing::TextVerticalAdjust_CENTER;
431 :
432 0 : aValueMap.insert( tPropertyNameValueMap::value_type( "TextHorizontalAdjust", uno::makeAny(eHorizontalAdjust) ) ); // drawing::TextHorizontalAdjust
433 0 : aValueMap.insert( tPropertyNameValueMap::value_type( "TextVerticalAdjust", uno::makeAny(eVerticalAdjust) ) ); //drawing::TextVerticalAdjust
434 0 : aValueMap.insert( tPropertyNameValueMap::value_type( "TextAutoGrowHeight", uno::makeAny(sal_True) ) ); // sal_Bool
435 0 : aValueMap.insert( tPropertyNameValueMap::value_type( "TextAutoGrowWidth", uno::makeAny(sal_True) ) ); // sal_Bool
436 :
437 : }
438 :
439 : //set global title properties
440 0 : tNameSequence aPropNames;
441 0 : tAnySequence aPropValues;
442 0 : PropertyMapper::getMultiPropertyListsFromValueMap( aPropNames, aPropValues, aValueMap );
443 :
444 0 : OUString aString = rFormattedString[0]->getString();
445 :
446 0 : sal_Int32 nXPos = rPos.X;
447 0 : sal_Int32 nYPos = rPos.Y;
448 0 : ::basegfx::B2DHomMatrix aM;
449 0 : aM.rotate( -nRotation*F_PI/180.0 );//#i78696#->#i80521#
450 0 : aM.translate( nXPos, nYPos );
451 :
452 : dummy::DummyText* pText = new dummy::DummyText(aString, aPropNames, aPropValues,
453 0 : uno::makeAny(B2DHomMatrixToHomogenMatrix3(aM)), xTarget, nRotation);
454 0 : pText->setName(rName);
455 0 : return pText;
456 : }
457 :
458 0 : void OpenglShapeFactory::render(uno::Reference< drawing::XShapes > xRootShape)
459 : {
460 0 : dummy::DummyChart* pChart = dynamic_cast<dummy::DummyChart*>(xRootShape.get());
461 : assert(pChart);
462 0 : pChart->render();
463 0 : }
464 :
465 0 : void OpenglShapeFactory::clearPage(uno::Reference< drawing::XShapes > xRootShape)
466 : {
467 0 : dummy::DummyChart* pChart = dynamic_cast<dummy::DummyChart*>(xRootShape.get());
468 : assert(pChart);
469 0 : pChart->clear();
470 0 : }
471 :
472 : } //namespace dummy
473 :
474 0 : } //namespace chart
475 :
476 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
