Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <cuires.hrc>
21 : #include <dialmgr.hxx>
22 : #include <sfx2/app.hxx>
23 : #include <sfx2/module.hxx>
24 : #include <sfx2/request.hxx>
25 : #include <tools/shl.hxx>
26 : #include <vcl/settings.hxx>
27 :
28 : #include <svx/dialmgr.hxx>
29 : #include <svx/dialogs.hrc>
30 : #include <svx/dlgutil.hxx>
31 : #include <svx/measctrl.hxx>
32 : #include <svx/ofaitem.hxx>
33 : #include <svx/strarray.hxx>
34 : #include <svx/svdattr.hxx>
35 : #include <svx/svdomeas.hxx>
36 : #include <svx/svdview.hxx>
37 : #include <svx/sxekitm.hxx>
38 : #include <svx/sxelditm.hxx>
39 : #include <svx/sxenditm.hxx>
40 : #include <svx/sxmbritm.hxx>
41 : #include <svx/sxmfsitm.hxx>
42 : #include <svx/sxmlhitm.hxx>
43 : #include <svx/sxmsuitm.hxx>
44 : #include <svx/sxmtfitm.hxx>
45 : #include <svx/sxmtpitm.hxx>
46 : #include <svx/sxmtritm.hxx>
47 : #include <svx/sxmuitm.hxx>
48 :
49 : #include "measure.hxx"
50 :
51 : static sal_uInt16 pRanges[] =
52 : {
53 : SDRATTR_MEASURE_FIRST,
54 : SDRATTR_MEASURE_LAST,
55 : 0
56 : };
57 :
58 : /*************************************************************************
59 : |*
60 : |* Dialog to change measure-attributes
61 : |*
62 : \************************************************************************/
63 :
64 0 : SvxMeasureDialog::SvxMeasureDialog( Window* pParent, const SfxItemSet& rInAttrs,
65 : const SdrView* pSdrView )
66 0 : : SfxSingleTabDialog(pParent, rInAttrs)
67 : {
68 0 : SvxMeasurePage* _pPage = new SvxMeasurePage( get_content_area(), rInAttrs );
69 :
70 0 : _pPage->SetView( pSdrView );
71 0 : _pPage->Construct();
72 :
73 0 : SetTabPage(_pPage );
74 0 : SetText(CUI_RESSTR(RID_SVXSTR_DIMENSION_LINE));
75 0 : }
76 :
77 : /*************************************************************************
78 : |*
79 : |* Tabpage for changing measure-attributes
80 : |*
81 : \************************************************************************/
82 :
83 0 : SvxMeasurePage::SvxMeasurePage( Window* pWindow, const SfxItemSet& rInAttrs ) :
84 : SvxTabPage ( pWindow
85 : ,"DimensionLinesTabPage"
86 : ,"cui/ui/dimensionlinestabpage.ui"
87 : ,rInAttrs ),
88 : rOutAttrs ( rInAttrs ),
89 0 : aAttrSet ( *rInAttrs.GetPool() ),
90 : pView( 0 ),
91 0 : bPositionModified ( sal_False )
92 : {
93 0 : get(m_pMtrFldLineDist, "MTR_LINE_DIST");
94 0 : get(m_pMtrFldHelplineOverhang, "MTR_FLD_HELPLINE_OVERHANG");
95 0 : get(m_pMtrFldHelplineDist, "MTR_FLD_HELPLINE_DIST");
96 0 : get(m_pMtrFldHelpline1Len, "MTR_FLD_HELPLINE1_LEN");
97 0 : get(m_pMtrFldHelpline2Len, "MTR_FLD_HELPLINE2_LEN");
98 0 : get(m_pTsbBelowRefEdge, "TSB_BELOW_REF_EDGE");
99 0 : get(m_pMtrFldDecimalPlaces, "MTR_FLD_DECIMALPLACES");
100 :
101 0 : get(m_pCtlPosition, "CTL_POSITION");
102 0 : get(m_pTsbAutoPosV, "TSB_AUTOPOSV");
103 0 : get(m_pTsbAutoPosH, "TSB_AUTOPOSH");
104 0 : get(m_pTsbShowUnit, "TSB_SHOW_UNIT");
105 0 : get(m_pLbUnit, "LB_UNIT");
106 0 : get(m_pTsbParallel, "TSB_PARALLEL");
107 :
108 0 : get(m_pCtlPreview, "CTL_PREVIEW");
109 0 : m_pCtlPreview->SetAttributes(rInAttrs);
110 :
111 0 : get(m_pFtAutomatic,"STR_MEASURE_AUTOMATIC");
112 :
113 0 : FillUnitLB();
114 :
115 0 : const FieldUnit eFUnit = GetModuleFieldUnit( rInAttrs );
116 0 : SetFieldUnit( *m_pMtrFldLineDist, eFUnit );
117 0 : SetFieldUnit( *m_pMtrFldHelplineOverhang, eFUnit );
118 0 : SetFieldUnit( *m_pMtrFldHelplineDist, eFUnit );
119 0 : SetFieldUnit( *m_pMtrFldHelpline1Len, eFUnit );
120 0 : SetFieldUnit( *m_pMtrFldHelpline2Len, eFUnit );
121 0 : if( eFUnit == FUNIT_MM )
122 : {
123 0 : m_pMtrFldLineDist->SetSpinSize( 50 );
124 0 : m_pMtrFldHelplineOverhang->SetSpinSize( 50 );
125 0 : m_pMtrFldHelplineDist->SetSpinSize( 50 );
126 0 : m_pMtrFldHelpline1Len->SetSpinSize( 50 );
127 0 : m_pMtrFldHelpline2Len->SetSpinSize( 50 );
128 : }
129 :
130 0 : m_pTsbAutoPosV->SetClickHdl( LINK( this, SvxMeasurePage, ClickAutoPosHdl_Impl ) );
131 0 : m_pTsbAutoPosH->SetClickHdl( LINK( this, SvxMeasurePage, ClickAutoPosHdl_Impl ) );
132 :
133 : // set background and border of iconchoicectrl
134 0 : const StyleSettings& rStyles = Application::GetSettings().GetStyleSettings();
135 0 : m_pCtlPreview->SetBackground ( rStyles.GetWindowColor() );
136 0 : m_pCtlPreview->SetBorderStyle(WINDOW_BORDER_MONO);
137 :
138 0 : Link aLink( LINK( this, SvxMeasurePage, ChangeAttrHdl_Impl ) );
139 0 : m_pMtrFldLineDist->SetModifyHdl( aLink );
140 0 : m_pMtrFldHelplineOverhang->SetModifyHdl( aLink );
141 0 : m_pMtrFldHelplineDist->SetModifyHdl( aLink );
142 0 : m_pMtrFldHelpline1Len->SetModifyHdl( aLink );
143 0 : m_pMtrFldHelpline2Len->SetModifyHdl( aLink );
144 0 : m_pMtrFldDecimalPlaces->SetModifyHdl( aLink );
145 0 : m_pTsbBelowRefEdge->SetClickHdl( aLink );
146 0 : m_pTsbParallel->SetClickHdl( aLink );
147 0 : m_pTsbShowUnit->SetClickHdl( aLink );
148 0 : m_pLbUnit->SetSelectHdl( aLink );
149 0 : }
150 :
151 : /*************************************************************************
152 : |*
153 : |* Dtor
154 : |*
155 : \************************************************************************/
156 :
157 0 : SvxMeasurePage::~SvxMeasurePage()
158 : {
159 0 : }
160 :
161 : /*************************************************************************
162 : |*
163 : |* read the delivered Item-Set
164 : |*
165 : \************************************************************************/
166 :
167 0 : void SvxMeasurePage::Reset( const SfxItemSet& rAttrs )
168 : {
169 0 : SfxItemPool* pPool = rAttrs.GetPool();
170 : DBG_ASSERT( pPool, "Wo ist der Pool" );
171 0 : eUnit = pPool->GetMetric( SDRATTR_MEASURELINEDIST );
172 :
173 0 : const SfxPoolItem* pItem = GetItem( rAttrs, SDRATTR_MEASURELINEDIST );
174 :
175 : // SdrMeasureLineDistItem
176 0 : if( pItem == NULL )
177 0 : pItem = &pPool->GetDefaultItem( SDRATTR_MEASURELINEDIST );
178 0 : if( pItem )
179 : {
180 0 : long nValue = ( ( const SdrMeasureLineDistItem* )pItem )->GetValue();
181 0 : SetMetricValue( *m_pMtrFldLineDist, nValue, eUnit );
182 : }
183 : else
184 : {
185 0 : m_pMtrFldLineDist->SetText( OUString() );
186 : }
187 0 : m_pMtrFldLineDist->SaveValue();
188 :
189 : // SdrMeasureHelplineOverhangItem
190 0 : pItem = GetItem( rAttrs, SDRATTR_MEASUREHELPLINEOVERHANG );
191 0 : if( pItem == NULL )
192 0 : pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINEOVERHANG );
193 0 : if( pItem )
194 : {
195 0 : long nValue = ( ( const SdrMeasureHelplineOverhangItem* )pItem )->GetValue();
196 0 : SetMetricValue( *m_pMtrFldHelplineOverhang, nValue, eUnit );
197 : }
198 : else
199 : {
200 0 : m_pMtrFldHelplineOverhang->SetText( OUString() );
201 : }
202 0 : m_pMtrFldHelplineOverhang->SaveValue();
203 :
204 : // SdrMeasureHelplineDistItem
205 0 : pItem = GetItem( rAttrs, SDRATTR_MEASUREHELPLINEDIST );
206 0 : if( pItem == NULL )
207 0 : pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINEDIST );
208 0 : if( pItem )
209 : {
210 0 : long nValue = ( ( const SdrMeasureHelplineDistItem* )pItem )->GetValue();
211 0 : SetMetricValue( *m_pMtrFldHelplineDist, nValue, eUnit );
212 : }
213 : else
214 : {
215 0 : m_pMtrFldHelplineDist->SetText( OUString() );
216 : }
217 0 : m_pMtrFldHelplineDist->SaveValue();
218 :
219 : // SdrMeasureHelpline1LenItem
220 0 : pItem = GetItem( rAttrs, SDRATTR_MEASUREHELPLINE1LEN );
221 0 : if( pItem == NULL )
222 0 : pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINE1LEN );
223 0 : if( pItem )
224 : {
225 0 : long nValue = ( ( const SdrMeasureHelpline1LenItem* )pItem )->GetValue();
226 0 : SetMetricValue( *m_pMtrFldHelpline1Len, nValue, eUnit );
227 : }
228 : else
229 : {
230 0 : m_pMtrFldHelpline1Len->SetText( OUString() );
231 : }
232 0 : m_pMtrFldHelpline1Len->SaveValue();
233 :
234 : // SdrMeasureHelpline2LenItem
235 0 : pItem = GetItem( rAttrs, SDRATTR_MEASUREHELPLINE2LEN );
236 0 : if( pItem == NULL )
237 0 : pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINE2LEN );
238 0 : if( pItem )
239 : {
240 0 : long nValue = ( ( const SdrMeasureHelpline2LenItem* )pItem )->GetValue();
241 0 : SetMetricValue( *m_pMtrFldHelpline2Len, nValue, eUnit );
242 : }
243 : else
244 : {
245 0 : m_pMtrFldHelpline2Len->SetText( OUString() );
246 : }
247 0 : m_pMtrFldHelpline2Len->SaveValue();
248 :
249 : // SdrMeasureBelowRefEdgeItem
250 0 : if( rAttrs.GetItemState( SDRATTR_MEASUREBELOWREFEDGE ) != SFX_ITEM_DONTCARE )
251 : {
252 0 : m_pTsbBelowRefEdge->SetState( ( ( const SdrMeasureBelowRefEdgeItem& )rAttrs.Get( SDRATTR_MEASUREBELOWREFEDGE ) ).
253 0 : GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE );
254 0 : m_pTsbBelowRefEdge->EnableTriState( false );
255 : }
256 : else
257 : {
258 0 : m_pTsbBelowRefEdge->SetState( TRISTATE_INDET );
259 : }
260 0 : m_pTsbBelowRefEdge->SaveValue();
261 :
262 : // SdrMeasureDecimalPlacesItem
263 0 : pItem = GetItem( rAttrs, SDRATTR_MEASUREDECIMALPLACES );
264 0 : if( pItem == NULL )
265 0 : pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREDECIMALPLACES );
266 0 : if( pItem )
267 : {
268 0 : sal_Int16 nValue = ( ( const SdrMeasureDecimalPlacesItem* )pItem )->GetValue();
269 0 : m_pMtrFldDecimalPlaces->SetValue( nValue );
270 : }
271 : else
272 : {
273 0 : m_pMtrFldDecimalPlaces->SetText( OUString() );
274 : }
275 0 : m_pMtrFldDecimalPlaces->SaveValue();
276 :
277 : // SdrMeasureTextRota90Item
278 : // Attention: negate !
279 0 : if( rAttrs.GetItemState( SDRATTR_MEASURETEXTROTA90 ) != SFX_ITEM_DONTCARE )
280 : {
281 0 : m_pTsbParallel->SetState( ( ( const SdrMeasureTextRota90Item& )rAttrs.Get( SDRATTR_MEASURETEXTROTA90 ) ).
282 0 : GetValue() ? TRISTATE_FALSE : TRISTATE_TRUE );
283 0 : m_pTsbParallel->EnableTriState( false );
284 : }
285 : else
286 : {
287 0 : m_pTsbParallel->SetState( TRISTATE_INDET );
288 : }
289 0 : m_pTsbParallel->SaveValue();
290 :
291 : // SdrMeasureShowUnitItem
292 0 : if( rAttrs.GetItemState( SDRATTR_MEASURESHOWUNIT ) != SFX_ITEM_DONTCARE )
293 : {
294 0 : m_pTsbShowUnit->SetState( ( ( const SdrMeasureShowUnitItem& )rAttrs.Get( SDRATTR_MEASURESHOWUNIT ) ).
295 0 : GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE );
296 0 : m_pTsbShowUnit->EnableTriState( false );
297 : }
298 : else
299 : {
300 0 : m_pTsbShowUnit->SetState( TRISTATE_INDET );
301 : }
302 0 : m_pTsbShowUnit->SaveValue();
303 :
304 : // SdrMeasureUnitItem
305 0 : if( rAttrs.GetItemState( SDRATTR_MEASUREUNIT ) != SFX_ITEM_DONTCARE )
306 : {
307 : long nFieldUnit = (long) ( ( const SdrMeasureUnitItem& )rAttrs.
308 0 : Get( SDRATTR_MEASUREUNIT ) ).GetValue();
309 :
310 0 : for( sal_Int32 i = 0; i < m_pLbUnit->GetEntryCount(); ++i )
311 : {
312 0 : if ( (sal_IntPtr)m_pLbUnit->GetEntryData( i ) == nFieldUnit )
313 : {
314 0 : m_pLbUnit->SelectEntryPos( i );
315 0 : break;
316 : }
317 : }
318 : }
319 : else
320 : {
321 0 : m_pLbUnit->SetNoSelection();
322 : }
323 0 : m_pLbUnit->SaveValue();
324 :
325 : // Position
326 0 : if ( rAttrs.GetItemState( SDRATTR_MEASURETEXTVPOS ) != SFX_ITEM_DONTCARE )
327 : {
328 : SdrMeasureTextVPos eVPos = (SdrMeasureTextVPos)
329 0 : ( ( const SdrMeasureTextVPosItem& )rAttrs.Get( SDRATTR_MEASURETEXTVPOS ) ).GetValue();
330 : {
331 0 : if ( rAttrs.GetItemState( SDRATTR_MEASURETEXTHPOS ) != SFX_ITEM_DONTCARE )
332 : {
333 0 : m_pTsbAutoPosV->EnableTriState( false );
334 0 : m_pTsbAutoPosH->EnableTriState( false );
335 :
336 : SdrMeasureTextHPos eHPos = (SdrMeasureTextHPos)
337 0 : ( ( const SdrMeasureTextHPosItem& )rAttrs.Get( SDRATTR_MEASURETEXTHPOS ) ).GetValue();
338 0 : RECT_POINT eRP = RP_MM;
339 0 : switch( eVPos )
340 : {
341 : case SDRMEASURE_ABOVE:
342 0 : switch( eHPos )
343 : {
344 0 : case SDRMEASURE_TEXTLEFTOUTSIDE: eRP = RP_LT; break;
345 0 : case SDRMEASURE_TEXTINSIDE: eRP = RP_MT; break;
346 0 : case SDRMEASURE_TEXTRIGHTOUTSIDE: eRP = RP_RT; break;
347 0 : case SDRMEASURE_TEXTHAUTO: eRP = RP_MT; break;
348 : }
349 0 : break;
350 : case SDRMEASURETEXT_VERTICALCENTERED:
351 0 : switch( eHPos )
352 : {
353 0 : case SDRMEASURE_TEXTLEFTOUTSIDE: eRP = RP_LM; break;
354 0 : case SDRMEASURE_TEXTINSIDE: eRP = RP_MM; break;
355 0 : case SDRMEASURE_TEXTRIGHTOUTSIDE: eRP = RP_RM; break;
356 0 : case SDRMEASURE_TEXTHAUTO: eRP = RP_MM; break;
357 : }
358 0 : break;
359 : case SDRMEASURE_BELOW:
360 0 : switch( eHPos )
361 : {
362 0 : case SDRMEASURE_TEXTLEFTOUTSIDE: eRP = RP_LB; break;
363 0 : case SDRMEASURE_TEXTINSIDE: eRP = RP_MB; break;
364 0 : case SDRMEASURE_TEXTRIGHTOUTSIDE: eRP = RP_RB; break;
365 0 : case SDRMEASURE_TEXTHAUTO: eRP = RP_MB; break;
366 : }
367 0 : break;
368 : case SDRMEASURE_TEXTVAUTO:
369 0 : switch( eHPos )
370 : {
371 0 : case SDRMEASURE_TEXTLEFTOUTSIDE: eRP = RP_LM; break;
372 0 : case SDRMEASURE_TEXTINSIDE: eRP = RP_MM; break;
373 0 : case SDRMEASURE_TEXTRIGHTOUTSIDE: eRP = RP_RM; break;
374 0 : case SDRMEASURE_TEXTHAUTO: eRP = RP_MM; break;
375 : }
376 0 : break;
377 : default: ;//prevent warning
378 : }
379 :
380 0 : CTL_STATE nState = 0;
381 :
382 0 : if( eHPos == SDRMEASURE_TEXTHAUTO )
383 : {
384 0 : m_pTsbAutoPosH->SetState( TRISTATE_TRUE );
385 0 : nState = CS_NOHORZ;
386 : }
387 :
388 0 : if( eVPos == SDRMEASURE_TEXTVAUTO )
389 : {
390 0 : m_pTsbAutoPosV->SetState( TRISTATE_TRUE );
391 0 : nState |= CS_NOVERT;
392 : }
393 :
394 0 : m_pCtlPosition->SetState( nState );
395 0 : m_pCtlPosition->SetActualRP( eRP );
396 : }
397 : }
398 : }
399 : else
400 : {
401 0 : m_pCtlPosition->Reset();
402 0 : m_pTsbAutoPosV->SetState( TRISTATE_INDET );
403 0 : m_pTsbAutoPosH->SetState( TRISTATE_INDET );
404 : }
405 :
406 : // put the attributes to the preview-control,
407 : // otherwise the control don't know about
408 : // the settings of the dialog (#67930)
409 0 : ChangeAttrHdl_Impl( m_pTsbShowUnit );
410 0 : m_pCtlPreview->SetAttributes( rAttrs );
411 :
412 0 : bPositionModified = sal_False;
413 0 : }
414 :
415 : /*************************************************************************
416 : |*
417 : |* Fill the delivered Item-Set with dialogbox-attributes
418 : |*
419 : \************************************************************************/
420 :
421 0 : bool SvxMeasurePage::FillItemSet( SfxItemSet& rAttrs)
422 : {
423 0 : sal_Bool bModified = sal_False;
424 : sal_Int32 nValue;
425 : TriState eState;
426 :
427 0 : if( m_pMtrFldLineDist->GetText() != m_pMtrFldLineDist->GetSavedValue() )
428 : {
429 0 : nValue = GetCoreValue( *m_pMtrFldLineDist, eUnit );
430 0 : rAttrs.Put( SdrMeasureLineDistItem( nValue ) );
431 0 : bModified = sal_True;
432 : }
433 :
434 0 : if( m_pMtrFldHelplineOverhang->GetText() != m_pMtrFldHelplineOverhang->GetSavedValue() )
435 : {
436 0 : nValue = GetCoreValue( *m_pMtrFldHelplineOverhang, eUnit );
437 0 : rAttrs.Put( SdrMeasureHelplineOverhangItem( nValue ) );
438 0 : bModified = sal_True;
439 : }
440 :
441 0 : if( m_pMtrFldHelplineDist->GetText() != m_pMtrFldHelplineDist->GetSavedValue() )
442 : {
443 0 : nValue = GetCoreValue( *m_pMtrFldHelplineDist, eUnit );
444 0 : rAttrs.Put( SdrMeasureHelplineDistItem( nValue ) );
445 0 : bModified = sal_True;
446 : }
447 :
448 0 : if( m_pMtrFldHelpline1Len->GetText() != m_pMtrFldHelpline1Len->GetSavedValue() )
449 : {
450 0 : nValue = GetCoreValue( *m_pMtrFldHelpline1Len, eUnit );
451 0 : rAttrs.Put( SdrMeasureHelpline1LenItem( nValue ) );
452 0 : bModified = sal_True;
453 : }
454 :
455 0 : if( m_pMtrFldHelpline2Len->GetText() != m_pMtrFldHelpline2Len->GetSavedValue() )
456 : {
457 0 : nValue = GetCoreValue( *m_pMtrFldHelpline2Len, eUnit );
458 0 : rAttrs.Put( SdrMeasureHelpline2LenItem( nValue ) );
459 0 : bModified = sal_True;
460 : }
461 :
462 0 : eState = m_pTsbBelowRefEdge->GetState();
463 0 : if( eState != m_pTsbBelowRefEdge->GetSavedValue() )
464 : {
465 0 : rAttrs.Put( SdrMeasureBelowRefEdgeItem( (sal_Bool) TRISTATE_TRUE == eState ) );
466 0 : bModified = sal_True;
467 : }
468 :
469 0 : if( m_pMtrFldDecimalPlaces->GetText() != m_pMtrFldDecimalPlaces->GetSavedValue() )
470 : {
471 0 : nValue = static_cast<sal_Int32>(m_pMtrFldDecimalPlaces->GetValue());
472 : rAttrs.Put(
473 : SdrMeasureDecimalPlacesItem(
474 0 : sal::static_int_cast< sal_Int16 >( nValue ) ) );
475 0 : bModified = sal_True;
476 : }
477 :
478 0 : eState = m_pTsbParallel->GetState();
479 0 : if( eState != m_pTsbParallel->GetSavedValue() )
480 : {
481 0 : rAttrs.Put( SdrMeasureTextRota90Item( (sal_Bool) TRISTATE_FALSE == eState ) );
482 0 : bModified = sal_True;
483 : }
484 :
485 0 : eState = m_pTsbShowUnit->GetState();
486 0 : if( eState != m_pTsbShowUnit->GetSavedValue() )
487 : {
488 0 : rAttrs.Put( SdrMeasureShowUnitItem( (sal_Bool) TRISTATE_TRUE == eState ) );
489 0 : bModified = sal_True;
490 : }
491 :
492 0 : sal_Int32 nPos = m_pLbUnit->GetSelectEntryPos();
493 0 : if( nPos != m_pLbUnit->GetSavedValue() )
494 : {
495 0 : if( nPos != LISTBOX_ENTRY_NOTFOUND )
496 : {
497 0 : sal_uInt16 nFieldUnit = (sal_uInt16)(sal_IntPtr)m_pLbUnit->GetEntryData( nPos );
498 0 : FieldUnit _eUnit = (FieldUnit) nFieldUnit;
499 0 : rAttrs.Put( SdrMeasureUnitItem( _eUnit ) );
500 0 : bModified = sal_True;
501 : }
502 : }
503 :
504 0 : if( bPositionModified )
505 : {
506 : // Position
507 : SdrMeasureTextVPos eVPos, eOldVPos;
508 : SdrMeasureTextHPos eHPos, eOldHPos;
509 :
510 0 : RECT_POINT eRP = m_pCtlPosition->GetActualRP();
511 0 : switch( eRP )
512 : {
513 : default:
514 0 : case RP_LT: eVPos = SDRMEASURE_ABOVE;
515 0 : eHPos = SDRMEASURE_TEXTLEFTOUTSIDE; break;
516 0 : case RP_LM: eVPos = SDRMEASURETEXT_VERTICALCENTERED;
517 0 : eHPos = SDRMEASURE_TEXTLEFTOUTSIDE; break;
518 0 : case RP_LB: eVPos = SDRMEASURE_BELOW;
519 0 : eHPos = SDRMEASURE_TEXTLEFTOUTSIDE; break;
520 0 : case RP_MT: eVPos = SDRMEASURE_ABOVE;
521 0 : eHPos = SDRMEASURE_TEXTINSIDE; break;
522 0 : case RP_MM: eVPos = SDRMEASURETEXT_VERTICALCENTERED;
523 0 : eHPos = SDRMEASURE_TEXTINSIDE; break;
524 0 : case RP_MB: eVPos = SDRMEASURE_BELOW;
525 0 : eHPos = SDRMEASURE_TEXTINSIDE; break;
526 0 : case RP_RT: eVPos = SDRMEASURE_ABOVE;
527 0 : eHPos = SDRMEASURE_TEXTRIGHTOUTSIDE; break;
528 0 : case RP_RM: eVPos = SDRMEASURETEXT_VERTICALCENTERED;
529 0 : eHPos = SDRMEASURE_TEXTRIGHTOUTSIDE; break;
530 0 : case RP_RB: eVPos = SDRMEASURE_BELOW;
531 0 : eHPos = SDRMEASURE_TEXTRIGHTOUTSIDE; break;
532 : }
533 0 : if( m_pTsbAutoPosH->GetState() == TRISTATE_TRUE )
534 0 : eHPos = SDRMEASURE_TEXTHAUTO;
535 :
536 0 : if( m_pTsbAutoPosV->GetState() == TRISTATE_TRUE )
537 0 : eVPos = SDRMEASURE_TEXTVAUTO;
538 :
539 0 : if ( rAttrs.GetItemState( SDRATTR_MEASURETEXTVPOS ) != SFX_ITEM_DONTCARE )
540 : {
541 : eOldVPos = (SdrMeasureTextVPos)
542 0 : ( ( const SdrMeasureTextVPosItem& )rOutAttrs.Get( SDRATTR_MEASURETEXTVPOS ) ).GetValue();
543 0 : if( eOldVPos != eVPos )
544 : {
545 0 : rAttrs.Put( SdrMeasureTextVPosItem( eVPos ) );
546 0 : bModified = sal_True;
547 : }
548 : }
549 : else
550 : {
551 0 : rAttrs.Put( SdrMeasureTextVPosItem( eVPos ) );
552 0 : bModified = sal_True;
553 : }
554 :
555 0 : if ( rAttrs.GetItemState( SDRATTR_MEASURETEXTHPOS ) != SFX_ITEM_DONTCARE )
556 : {
557 : eOldHPos = (SdrMeasureTextHPos)
558 0 : ( ( const SdrMeasureTextHPosItem& )rOutAttrs.Get( SDRATTR_MEASURETEXTHPOS ) ).GetValue();
559 0 : if( eOldHPos != eHPos )
560 : {
561 0 : rAttrs.Put( SdrMeasureTextHPosItem( eHPos ) );
562 0 : bModified = sal_True;
563 : }
564 : }
565 : else
566 : {
567 0 : rAttrs.Put( SdrMeasureTextHPosItem( eHPos ) );
568 0 : bModified = sal_True;
569 : }
570 : }
571 :
572 0 : return( bModified );
573 : }
574 :
575 : /*************************************************************************
576 : |*
577 : |* The View have to set at the measure-object to be able to notify
578 : |* unit and floatingpoint-values
579 : |*
580 : \************************************************************************/
581 :
582 0 : void SvxMeasurePage::Construct()
583 : {
584 : DBG_ASSERT( pView, "Keine gueltige View Uebergeben!" );
585 :
586 0 : m_pCtlPreview->pMeasureObj->SetModel( pView->GetModel() );
587 0 : m_pCtlPreview->Invalidate();
588 0 : }
589 :
590 : /*************************************************************************
591 : |*
592 : |* create the tabpage
593 : |*
594 : \************************************************************************/
595 :
596 0 : SfxTabPage* SvxMeasurePage::Create( Window* pWindow,
597 : const SfxItemSet& rAttrs )
598 : {
599 0 : return( new SvxMeasurePage( pWindow, rAttrs ) );
600 : }
601 :
602 0 : sal_uInt16* SvxMeasurePage::GetRanges()
603 : {
604 0 : return( pRanges );
605 : }
606 :
607 0 : void SvxMeasurePage::PointChanged( Window* pWindow, RECT_POINT /*eRP*/ )
608 : {
609 0 : ChangeAttrHdl_Impl( pWindow );
610 0 : }
611 :
612 0 : IMPL_LINK( SvxMeasurePage, ClickAutoPosHdl_Impl, void *, p )
613 : {
614 0 : if( m_pTsbAutoPosH->GetState() == TRISTATE_TRUE )
615 : {
616 0 : switch( m_pCtlPosition->GetActualRP() )
617 : {
618 : case RP_LT:
619 : case RP_RT:
620 0 : m_pCtlPosition->SetActualRP( RP_MT );
621 0 : break;
622 :
623 : case RP_LM:
624 : case RP_RM:
625 0 : m_pCtlPosition->SetActualRP( RP_MM );
626 0 : break;
627 :
628 : case RP_LB:
629 : case RP_RB:
630 0 : m_pCtlPosition->SetActualRP( RP_MB );
631 0 : break;
632 : default: ;//prevent warning
633 : }
634 : }
635 0 : if( m_pTsbAutoPosV->GetState() == TRISTATE_TRUE )
636 : {
637 0 : switch( m_pCtlPosition->GetActualRP() )
638 : {
639 : case RP_LT:
640 : case RP_LB:
641 0 : m_pCtlPosition->SetActualRP( RP_LM );
642 0 : break;
643 :
644 : case RP_MT:
645 : case RP_MB:
646 0 : m_pCtlPosition->SetActualRP( RP_MM );
647 0 : break;
648 :
649 : case RP_RT:
650 : case RP_RB:
651 0 : m_pCtlPosition->SetActualRP( RP_RM );
652 0 : break;
653 : default: ;//prevent warning
654 : }
655 : }
656 0 : ChangeAttrHdl_Impl( p );
657 :
658 0 : return( 0L );
659 : }
660 :
661 0 : IMPL_LINK( SvxMeasurePage, ChangeAttrHdl_Impl, void *, p )
662 : {
663 :
664 0 : if( p == m_pMtrFldLineDist )
665 : {
666 0 : sal_Int32 nValue = GetCoreValue( *m_pMtrFldLineDist, eUnit );
667 0 : aAttrSet.Put( SdrMeasureLineDistItem( nValue ) );
668 : }
669 :
670 0 : if( p == m_pMtrFldHelplineOverhang )
671 : {
672 0 : sal_Int32 nValue = GetCoreValue( *m_pMtrFldHelplineOverhang, eUnit );
673 0 : aAttrSet.Put( SdrMeasureHelplineOverhangItem( nValue) );
674 : }
675 :
676 0 : if( p == m_pMtrFldHelplineDist )
677 : {
678 0 : sal_Int32 nValue = GetCoreValue( *m_pMtrFldHelplineDist, eUnit );
679 0 : aAttrSet.Put( SdrMeasureHelplineDistItem( nValue) );
680 : }
681 :
682 0 : if( p == m_pMtrFldHelpline1Len )
683 : {
684 0 : sal_Int32 nValue = GetCoreValue( *m_pMtrFldHelpline1Len, eUnit );
685 0 : aAttrSet.Put( SdrMeasureHelpline1LenItem( nValue ) );
686 : }
687 :
688 0 : if( p == m_pMtrFldHelpline2Len )
689 : {
690 0 : sal_Int32 nValue = GetCoreValue( *m_pMtrFldHelpline2Len, eUnit );
691 0 : aAttrSet.Put( SdrMeasureHelpline2LenItem( nValue ) );
692 : }
693 :
694 0 : if( p == m_pTsbBelowRefEdge )
695 : {
696 0 : TriState eState = m_pTsbBelowRefEdge->GetState();
697 0 : if( eState != TRISTATE_INDET )
698 0 : aAttrSet.Put( SdrMeasureBelowRefEdgeItem( (sal_Bool) TRISTATE_TRUE == eState ) );
699 : }
700 :
701 0 : if( p == m_pMtrFldDecimalPlaces )
702 : {
703 : sal_Int16 nValue = sal::static_int_cast< sal_Int16 >(
704 0 : m_pMtrFldDecimalPlaces->GetValue() );
705 0 : aAttrSet.Put( SdrMeasureDecimalPlacesItem( nValue ) );
706 : }
707 :
708 0 : if( p == m_pTsbParallel )
709 : {
710 0 : TriState eState = m_pTsbParallel->GetState();
711 0 : if( eState != TRISTATE_INDET )
712 0 : aAttrSet.Put( SdrMeasureTextRota90Item( (sal_Bool) TRISTATE_FALSE == eState ) );
713 : }
714 :
715 0 : if( p == m_pTsbShowUnit )
716 : {
717 0 : TriState eState = m_pTsbShowUnit->GetState();
718 0 : if( eState != TRISTATE_INDET )
719 0 : aAttrSet.Put( SdrMeasureShowUnitItem( (sal_Bool) TRISTATE_TRUE == eState ) );
720 : }
721 :
722 0 : if( p == m_pLbUnit )
723 : {
724 0 : sal_Int32 nPos = m_pLbUnit->GetSelectEntryPos();
725 0 : if( nPos != LISTBOX_ENTRY_NOTFOUND )
726 : {
727 0 : sal_uInt16 nFieldUnit = (sal_uInt16)(sal_IntPtr)m_pLbUnit->GetEntryData( nPos );
728 0 : FieldUnit _eUnit = (FieldUnit) nFieldUnit;
729 0 : aAttrSet.Put( SdrMeasureUnitItem( _eUnit ) );
730 : }
731 : }
732 :
733 0 : if( p == m_pTsbAutoPosV || p == m_pTsbAutoPosH || p == m_pCtlPosition )
734 : {
735 0 : bPositionModified = sal_True;
736 :
737 : // Position
738 0 : RECT_POINT eRP = m_pCtlPosition->GetActualRP();
739 : SdrMeasureTextVPos eVPos;
740 : SdrMeasureTextHPos eHPos;
741 :
742 0 : switch( eRP )
743 : {
744 : default:
745 0 : case RP_LT: eVPos = SDRMEASURE_ABOVE;
746 0 : eHPos = SDRMEASURE_TEXTLEFTOUTSIDE; break;
747 0 : case RP_LM: eVPos = SDRMEASURETEXT_VERTICALCENTERED;
748 0 : eHPos = SDRMEASURE_TEXTLEFTOUTSIDE; break;
749 0 : case RP_LB: eVPos = SDRMEASURE_BELOW;
750 0 : eHPos = SDRMEASURE_TEXTLEFTOUTSIDE; break;
751 0 : case RP_MT: eVPos = SDRMEASURE_ABOVE;
752 0 : eHPos = SDRMEASURE_TEXTINSIDE; break;
753 0 : case RP_MM: eVPos = SDRMEASURETEXT_VERTICALCENTERED;
754 0 : eHPos = SDRMEASURE_TEXTINSIDE; break;
755 0 : case RP_MB: eVPos = SDRMEASURE_BELOW;
756 0 : eHPos = SDRMEASURE_TEXTINSIDE; break;
757 0 : case RP_RT: eVPos = SDRMEASURE_ABOVE;
758 0 : eHPos = SDRMEASURE_TEXTRIGHTOUTSIDE; break;
759 0 : case RP_RM: eVPos = SDRMEASURETEXT_VERTICALCENTERED;
760 0 : eHPos = SDRMEASURE_TEXTRIGHTOUTSIDE; break;
761 0 : case RP_RB: eVPos = SDRMEASURE_BELOW;
762 0 : eHPos = SDRMEASURE_TEXTRIGHTOUTSIDE; break;
763 : }
764 :
765 0 : CTL_STATE nState = 0;
766 :
767 0 : if( m_pTsbAutoPosH->GetState() == TRISTATE_TRUE )
768 : {
769 0 : eHPos = SDRMEASURE_TEXTHAUTO;
770 0 : nState = CS_NOHORZ;
771 : }
772 :
773 0 : if( m_pTsbAutoPosV->GetState() == TRISTATE_TRUE )
774 : {
775 0 : eVPos = SDRMEASURE_TEXTVAUTO;
776 0 : nState |= CS_NOVERT;
777 : }
778 :
779 0 : if( p == m_pTsbAutoPosV || p == m_pTsbAutoPosH )
780 0 : m_pCtlPosition->SetState( nState );
781 :
782 0 : aAttrSet.Put( SdrMeasureTextVPosItem( eVPos ) );
783 0 : aAttrSet.Put( SdrMeasureTextHPosItem( eHPos ) );
784 : }
785 :
786 0 : m_pCtlPreview->SetAttributes( aAttrSet );
787 0 : m_pCtlPreview->Invalidate();
788 :
789 0 : return( 0L );
790 : }
791 :
792 0 : void SvxMeasurePage::FillUnitLB()
793 : {
794 : // fill ListBox with metrics
795 0 : SvxStringArray aMetricArr( SVX_RES( RID_SVXSTR_FIELDUNIT_TABLE ) );
796 :
797 0 : sal_IntPtr nUnit = FUNIT_NONE;
798 0 : OUString aStrMetric( m_pFtAutomatic->GetText());
799 0 : sal_Int32 nPos = m_pLbUnit->InsertEntry( aStrMetric );
800 0 : m_pLbUnit->SetEntryData( nPos, (void*)nUnit );
801 :
802 0 : for( sal_uInt32 i = 0; i < aMetricArr.Count(); ++i )
803 : {
804 0 : aStrMetric = aMetricArr.GetStringByPos( i );
805 0 : nUnit = aMetricArr.GetValue( i );
806 0 : nPos = m_pLbUnit->InsertEntry( aStrMetric );
807 0 : m_pLbUnit->SetEntryData( nPos, (void*)nUnit );
808 0 : }
809 0 : }
810 0 : void SvxMeasurePage::PageCreated (SfxAllItemSet aSet)
811 : {
812 0 : SFX_ITEMSET_ARG (&aSet,pOfaPtrItem,OfaPtrItem,SID_OBJECT_LIST,false);
813 :
814 0 : if (pOfaPtrItem)
815 0 : SetView( static_cast<SdrView *>(pOfaPtrItem->GetValue()));
816 :
817 0 : Construct();
818 0 : }
819 :
820 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
