Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 : #ifndef INCLUDED_FORMS_SOURCE_XFORMS_PROPERTYSETBASE_HXX
20 : #define INCLUDED_FORMS_SOURCE_XFORMS_PROPERTYSETBASE_HXX
21 :
22 : #include <cppuhelper/weak.hxx>
23 : #include <com/sun/star/lang/XTypeProvider.hpp>
24 : #include <comphelper/propstate.hxx>
25 : #include <comphelper/propertysetinfo.hxx>
26 : #include <comphelper/proparrhlp.hxx>
27 : #include <rtl/ref.hxx>
28 :
29 : // include for inlined helper function below
30 : #include <com/sun/star/lang/IllegalArgumentException.hpp>
31 : #include <com/sun/star/beans/PropertyAttribute.hpp>
32 :
33 : #include <map>
34 :
35 : // forward declarations for method arguments
36 : namespace com { namespace sun { namespace star { namespace uno {
37 : class Any;
38 : class RuntimeException;
39 : template<class T> class Sequence;
40 : } } } }
41 :
42 : /** base class which encapsulates accessing (reading/writing) concrete property values
43 : */
44 : class PropertyAccessorBase : public ::rtl::IReference
45 : {
46 : private:
47 : oslInterlockedCount m_refCount;
48 :
49 : protected:
50 0 : PropertyAccessorBase() : m_refCount( 0 ) { }
51 : virtual ~PropertyAccessorBase();
52 :
53 : public:
54 : virtual oslInterlockedCount SAL_CALL acquire() SAL_OVERRIDE;
55 : virtual oslInterlockedCount SAL_CALL release() SAL_OVERRIDE;
56 :
57 : virtual bool approveValue( const com::sun::star::uno::Any& rValue ) const = 0;
58 : virtual void setValue( const com::sun::star::uno::Any& rValue ) = 0;
59 : virtual void getValue( com::sun::star::uno::Any& rValue ) const = 0;
60 : virtual bool isWriteable() const = 0;
61 : };
62 :
63 :
64 : /** helper class for implementing property accessors through public member functions
65 : */
66 : template< typename CLASS, typename VALUE, class WRITER, class READER >
67 0 : class GenericPropertyAccessor : public PropertyAccessorBase
68 : {
69 : public:
70 : typedef WRITER Writer;
71 : typedef READER Reader;
72 :
73 : private:
74 : CLASS* m_pInstance;
75 : Writer m_pWriter;
76 : Reader m_pReader;
77 :
78 : public:
79 0 : GenericPropertyAccessor( CLASS* pInstance, Writer pWriter, Reader pReader )
80 : :m_pInstance( pInstance )
81 : ,m_pWriter( pWriter )
82 0 : ,m_pReader( pReader )
83 : {
84 0 : }
85 :
86 0 : virtual bool approveValue( const com::sun::star::uno::Any& rValue ) const SAL_OVERRIDE
87 : {
88 0 : VALUE aVal;
89 0 : return ( rValue >>= aVal );
90 : }
91 :
92 0 : virtual void setValue( const com::sun::star::uno::Any& rValue ) SAL_OVERRIDE
93 : {
94 0 : VALUE aTypedVal = VALUE();
95 0 : OSL_VERIFY( rValue >>= aTypedVal );
96 0 : (m_pInstance->*m_pWriter)( aTypedVal );
97 0 : }
98 :
99 0 : virtual void getValue( com::sun::star::uno::Any& rValue ) const SAL_OVERRIDE
100 : {
101 0 : rValue = com::sun::star::uno::makeAny( (m_pInstance->*m_pReader)() );
102 0 : }
103 :
104 0 : virtual bool isWriteable() const SAL_OVERRIDE
105 : {
106 0 : return m_pWriter != 0;
107 : }
108 : };
109 :
110 : /** helper class for implementing property accessors via non-UNO methods
111 : */
112 : template< typename CLASS, typename VALUE >
113 0 : class DirectPropertyAccessor
114 : :public GenericPropertyAccessor < CLASS
115 : , VALUE
116 : , void (CLASS::*)( const VALUE& )
117 : , VALUE (CLASS::*)() const
118 : >
119 : {
120 : protected:
121 : typedef void (CLASS::*Writer)( const VALUE& );
122 : typedef VALUE (CLASS::*Reader)() const;
123 : public:
124 0 : DirectPropertyAccessor( CLASS* pInstance, Writer pWriter, Reader pReader )
125 0 : :GenericPropertyAccessor< CLASS, VALUE, Writer, Reader >( pInstance, pWriter, pReader )
126 : {
127 0 : }
128 : };
129 :
130 : /** helper class for implementing non-UNO accessors to a boolean property
131 : */
132 : template< typename CLASS, typename DUMMY >
133 0 : class BooleanPropertyAccessor
134 : :public GenericPropertyAccessor < CLASS
135 : , bool
136 : , void (CLASS::*)( bool )
137 : , bool (CLASS::*)() const
138 : >
139 : {
140 : protected:
141 : typedef void (CLASS::*Writer)( bool );
142 : typedef bool (CLASS::*Reader)() const;
143 : public:
144 0 : BooleanPropertyAccessor( CLASS* pInstance, Writer pWriter, Reader pReader )
145 0 : :GenericPropertyAccessor< CLASS, bool, Writer, Reader >( pInstance, pWriter, pReader )
146 : {
147 0 : }
148 : };
149 :
150 : /** helper class for implementing property accessors via UNO methods
151 : */
152 : template< typename CLASS, typename VALUE >
153 0 : class APIPropertyAccessor
154 : :public GenericPropertyAccessor < CLASS
155 : , VALUE
156 : , void (SAL_CALL CLASS::*)( const VALUE& )
157 : , VALUE (SAL_CALL CLASS::*)()
158 : >
159 : {
160 : protected:
161 : typedef void (SAL_CALL CLASS::*Writer)( const VALUE& );
162 : typedef VALUE (SAL_CALL CLASS::*Reader)();
163 : public:
164 0 : APIPropertyAccessor( CLASS* pInstance, Writer pWriter, Reader pReader )
165 0 : :GenericPropertyAccessor< CLASS, VALUE, Writer, Reader >( pInstance, pWriter, pReader )
166 : {
167 0 : }
168 : };
169 :
170 : /** bridges two XPropertySet helper implementations
171 :
172 : The <type scope="comphelper">OStatefulPropertySet</type> (basically, the
173 : <type scope="cppu">OPropertySetHelper</type>) implements a comprehensive framework
174 : for property sets, including property change notifications.
175 : However, it lacks some easy possibilities to declare the supported properties.
176 : Other helper structs and classes allow for this, but are lacking needed features
177 : such as property change notifications.
178 :
179 : The <type>PropertySetBase</type> bridges various implementations,
180 : so you have the best of both worlds.
181 : */
182 : class PropertySetBase : public ::comphelper::OStatefulPropertySet
183 : {
184 : private:
185 : typedef com::sun::star::uno::Any Any_t;
186 :
187 : typedef ::std::map< const sal_Int32, ::rtl::Reference< PropertyAccessorBase > > PropertyAccessors;
188 : typedef ::std::vector< ::com::sun::star::beans::Property > PropertyArray;
189 : typedef ::std::map< const sal_Int32, Any_t > PropertyValueCache;
190 :
191 : PropertyArray m_aProperties;
192 : cppu::IPropertyArrayHelper* m_pProperties;
193 : PropertyAccessors m_aAccessors;
194 : PropertyValueCache m_aCache;
195 :
196 : protected:
197 : PropertySetBase();
198 : virtual ~PropertySetBase();
199 :
200 : /** registers a new property to be supported by this instance
201 : @param rProperty
202 : the descriptor for the to-be-supported property
203 : @param rAccessor
204 : an instance which is able to provide read and possibly write access to
205 : the property.
206 : @precond
207 : Must not be called after any of the property set related UNO interfaces
208 : has been used. Usually, you will do a number of <member>registerProperty</member>
209 : calls in the constructor of your class.
210 : */
211 : void registerProperty(
212 : const com::sun::star::beans::Property& rProperty,
213 : const ::rtl::Reference< PropertyAccessorBase >& rAccessor
214 : );
215 :
216 : /** notifies a change in a given property value, if necessary
217 :
218 : The necessity of the notification is determined by a cached value for the given
219 : property. Caching happens after notification.
220 :
221 : That is, when you call <member>notifyAndCachePropertyValue</member> for the first time,
222 : a value for the given property is default constructed, and considered to be the "old value".
223 : If this value differs from the current value, then this change is notified to all interested
224 : listeners. Finally, the current value is remembered.
225 :
226 : Subsequent calls to <member>notifyAndCachePropertyValue</member> use the remembered value as
227 : "old value", and from then on behave as the first call.
228 :
229 : @param nHandle
230 : the handle of the property. Must denote a property supported by this instance, i.e.
231 : one previously registered via <member>registerProperty</member>.
232 :
233 : @precond
234 : our ref count must not be 0. The reason is that during this method's execution,
235 : the instance might be acquired and released, which would immediately destroy
236 : the instance if it has a ref count of 0.
237 :
238 : @seealso initializePropertyValueCache
239 : */
240 : void notifyAndCachePropertyValue( sal_Int32 nHandle );
241 :
242 : /** initializes the property value cache for the given property, with its current value
243 :
244 : Usually used to initialize the cache with values which are different from default
245 : constructed values. Say you have a boolean property whose initial state
246 : is <TRUE/>. Say you call <member>notifyAndCachePropertyValue</member> the first time: it will
247 : default construct the "old value" for this property as <FALSE/>, and thus <b>not</b> do
248 : any notifications if the "current value" is also <FALSE/> - which might be wrong, since
249 : the guessing of the "old value" differed from the real initial value which was <TRUE/>.
250 :
251 : Too confusing? Okay, than just call this method for every property you have.
252 :
253 : @param nHandle
254 : the handle of the property. Must denote a property supported by this instance, i.e.
255 : one previously registered via <member>registerProperty</member>.
256 : @param rValue
257 : the value to cache
258 : @seealso notifyAndCachePropertyValue
259 : */
260 : void initializePropertyValueCache( sal_Int32 nHandle );
261 :
262 : /// OPropertysetHelper methods
263 : virtual sal_Bool SAL_CALL convertFastPropertyValue( Any_t& rConvertedValue, Any_t& rOldValue, sal_Int32 nHandle, const Any_t& rValue )
264 : throw (::com::sun::star::lang::IllegalArgumentException) SAL_OVERRIDE;
265 : virtual void SAL_CALL setFastPropertyValue_NoBroadcast( sal_Int32 nHandle, const Any_t& rValue )
266 : throw (::com::sun::star::uno::Exception, std::exception) SAL_OVERRIDE;
267 : virtual void SAL_CALL getFastPropertyValue( Any_t& rValue, sal_Int32 nHandle ) const SAL_OVERRIDE;
268 :
269 : virtual cppu::IPropertyArrayHelper& SAL_CALL getInfoHelper() SAL_OVERRIDE;
270 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySetInfo > SAL_CALL getPropertySetInfo( ) throw(::com::sun::star::uno::RuntimeException, std::exception) SAL_OVERRIDE;
271 :
272 : public:
273 : /// helper struct for granting selective access to some notification-related methods
274 0 : struct NotifierAccess { friend struct PropertyChangeNotifier; private: NotifierAccess() { } };
275 : /** retrieves the current property value for the given handle
276 : @param nHandle
277 : the handle of the property. Must denote a property supported by this instance, i.e.
278 : one previously registered via <member>registerProperty</member>.
279 : @see registerProperty
280 : */
281 0 : inline void getCurrentPropertyValueByHandle( sal_Int32 nHandle, Any_t& /* [out] */ rValue, const NotifierAccess& ) const
282 : {
283 0 : getFastPropertyValue( rValue, nHandle );
284 0 : }
285 :
286 : /** notifies a change in a given property to all interested listeners
287 : */
288 0 : inline void notifyPropertyChange( sal_Int32 nHandle, const Any_t& rOldValue, const Any_t& rNewValue, const NotifierAccess& ) const
289 : {
290 0 : const_cast< PropertySetBase* >( this )->firePropertyChange( nHandle, rNewValue, rOldValue );
291 0 : }
292 :
293 : using ::comphelper::OStatefulPropertySet::getFastPropertyValue;
294 :
295 : private:
296 : /** locates a property given by handle
297 : @param nHandle
298 : the handle of the property. Must denote a property supported by this instance, i.e.
299 : one previously registered via <member>registerProperty</member>.
300 : @see registerProperty
301 : */
302 : PropertyAccessorBase& locatePropertyHandler( sal_Int32 nHandle ) const;
303 : };
304 :
305 : /** a helper class for notifying property changes in a <type>PropertySetBase</type> instance.
306 :
307 : You can create an instance of this class on the stack of a method which is to programmatically
308 : change the value of a property. In its constructor, the instance will acquire the current property
309 : value, and in its destructor, it will notify the change of this property's value (if necessary).
310 :
311 : You do not need this class if you are modifying property values by using the X(Fast|Multi)PropertSet
312 : methods, since those already care for property notifications. You only need it if you're changing
313 : the internal representation of your property directly.
314 :
315 : Also note that usually, notifications in the UNO world should be done without a locked mutex. So
316 : if you use this class in conjunction with a <type>MutexGuard</type>, ensure that you <b>first</b>
317 : instantiate the <type>PropertyChangeNotifier</type>, and <b>then</b> the <type>MutexGuard</type>,
318 : so your mutex is released before the notification happens.
319 : */
320 : struct PropertyChangeNotifier
321 : {
322 : private:
323 : const PropertySetBase& m_rPropertySet;
324 : sal_Int32 m_nHandle;
325 : com::sun::star::uno::Any m_aOldValue;
326 :
327 : public:
328 : /** constructs a PropertyChangeNotifier
329 : @param rPropertySet
330 : the property set implementation whose property is going to be changed. Note
331 : that this property set implementation must live at least as long as the
332 : PropertyChangeNotifier instance does.
333 : @param nHandle
334 : the handle of the property which is going to be changed. Must be a valid property
335 : handle for the given <arg>rPropertySet</arg>
336 : */
337 0 : inline PropertyChangeNotifier( const PropertySetBase& rPropertySet, sal_Int32 nHandle )
338 : :m_rPropertySet( rPropertySet )
339 0 : ,m_nHandle( nHandle )
340 : {
341 0 : m_rPropertySet.getCurrentPropertyValueByHandle( m_nHandle, m_aOldValue, PropertySetBase::NotifierAccess() );
342 0 : }
343 0 : inline ~PropertyChangeNotifier()
344 0 : {
345 0 : com::sun::star::uno::Any aNewValue;
346 0 : m_rPropertySet.getCurrentPropertyValueByHandle( m_nHandle, aNewValue, PropertySetBase::NotifierAccess() );
347 0 : if ( aNewValue != m_aOldValue )
348 : {
349 0 : m_rPropertySet.notifyPropertyChange( m_nHandle, m_aOldValue, aNewValue, PropertySetBase::NotifierAccess() );
350 0 : }
351 0 : }
352 : };
353 :
354 :
355 : #define PROPERTY_FLAGS( NAME, TYPE, FLAG ) com::sun::star::beans::Property( \
356 : OUString( #NAME, sizeof( #NAME ) - 1, RTL_TEXTENCODING_ASCII_US ), \
357 : HANDLE_##NAME, getCppuType( static_cast< TYPE* >( NULL ) ), FLAG )
358 : #define PROPERTY( NAME, TYPE ) PROPERTY_FLAGS( NAME, TYPE, com::sun::star::beans::PropertyAttribute::BOUND )
359 : #define PROPERTY_RO( NAME, TYPE ) PROPERTY_FLAGS( NAME, TYPE, com::sun::star::beans::PropertyAttribute::BOUND | com::sun::star::beans::PropertyAttribute::READONLY )
360 :
361 : #endif
362 :
363 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
