Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 : #ifndef _REPORT_RPTUIOBJ_HXX
20 : #define _REPORT_RPTUIOBJ_HXX
21 :
22 : #include "dllapi.h"
23 : #include <svx/svdoole2.hxx>
24 : #include <svx/svdouno.hxx>
25 :
26 :
27 : #include <comphelper/processfactory.hxx>
28 : #include <com/sun/star/beans/XPropertyChangeListener.hpp>
29 : #include <com/sun/star/container/XContainerListener.hpp>
30 : #include <com/sun/star/report/XReportComponent.hpp>
31 : #include <com/sun/star/report/XSection.hpp>
32 : #include <svx/svdocirc.hxx>
33 : #include <svx/svdogrp.hxx>
34 : #include <svx/svdoashp.hxx>
35 : #include <comphelper/implementationreference.hxx>
36 :
37 :
38 : namespace rptui
39 : {
40 : typedef ::std::multimap< sal_Int16, OUString, ::std::less< sal_Int16 > > IndexToNameMap;
41 : enum DlgEdHintKind
42 : {
43 : RPTUI_HINT_UNKNOWN,
44 : RPTUI_HINT_WINDOWSCROLLED,
45 : RPTUI_HINT_LAYERCHANGED,
46 : RPTUI_HINT_OBJORDERCHANGED,
47 : RPTUI_HINT_SELECTIONCHANGED
48 : };
49 :
50 : class OUnoObject;
51 : class REPORTDESIGN_DLLPUBLIC DlgEdHint: public SfxHint
52 : {
53 : private:
54 : DlgEdHintKind eHintKind;
55 : OUnoObject* pDlgEdObj;
56 :
57 : DlgEdHint(DlgEdHint&);
58 : void operator =(DlgEdHint&);
59 : public:
60 : TYPEINFO_OVERRIDE();
61 : DlgEdHint( DlgEdHintKind eHint );
62 : virtual ~DlgEdHint();
63 :
64 0 : inline DlgEdHintKind GetKind() const { return eHintKind; }
65 : inline OUnoObject* GetObject() const { return pDlgEdObj; }
66 : };
67 :
68 :
69 : class OReportPage;
70 : class OPropertyMediator;
71 :
72 : class REPORTDESIGN_DLLPUBLIC OObjectBase
73 : {
74 : public:
75 : typedef ::comphelper::ImplementationReference<OPropertyMediator,::com::sun::star::beans::XPropertyChangeListener> TMediator;
76 :
77 : protected:
78 : mutable TMediator m_xMediator;
79 : mutable ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyChangeListener> m_xPropertyChangeListener;
80 : //mutable ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertyChangeListener>
81 : mutable ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent> m_xReportComponent;
82 : ::com::sun::star::uno::Reference< ::com::sun::star::container::XContainerListener> m_xContainerListener;
83 : ::com::sun::star::uno::Reference< ::com::sun::star::report::XSection> m_xSection;
84 : ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > m_xKeepShapeAlive;
85 : OUString m_sComponentName;
86 : sal_Bool m_bIsListening;
87 :
88 : OObjectBase(const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent);
89 : OObjectBase(const OUString& _sComponentName);
90 :
91 : virtual ~OObjectBase();
92 :
93 0 : inline sal_Bool isListening() const { return m_bIsListening; }
94 :
95 : void SetPropsFromRect(const Rectangle& _rRect);
96 :
97 : virtual void SetSnapRectImpl(const Rectangle& _rRect) = 0;
98 : virtual SdrPage* GetImplPage() const = 0;
99 : virtual void SetObjectItemHelper(const SfxPoolItem& rItem);
100 :
101 : /** called by instances of derived classes to implement their overloading of getUnoShape
102 : */
103 : ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface >
104 : getUnoShapeOf( SdrObject& _rSdrObject );
105 :
106 : private:
107 : static void ensureSdrObjectOwnership(
108 : const ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface >& _rxShape );
109 :
110 : public:
111 : void StartListening();
112 : void EndListening(sal_Bool bRemoveListener = sal_True);
113 : // PropertyChangeListener
114 : virtual void _propertyChange( const ::com::sun::star::beans::PropertyChangeEvent& evt ) throw(::com::sun::star::uno::RuntimeException);
115 0 : virtual void initializeOle() {}
116 :
117 : sal_Bool supportsService( const OUString& _sServiceName ) const;
118 :
119 : ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent> getReportComponent() const;
120 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet> getAwtComponent();
121 : inline void setOldParent(const ::com::sun::star::uno::Reference< ::com::sun::star::report::XSection>& _xSection) { m_xSection = _xSection; }
122 : inline ::com::sun::star::uno::Reference< ::com::sun::star::report::XSection> getOldParent() const { return m_xSection;}
123 : ::com::sun::star::uno::Reference< ::com::sun::star::report::XSection> getSection() const;
124 0 : inline const OUString getServiceName() const { return m_sComponentName; }
125 :
126 : /** releases the reference to our UNO shape (m_xKeepShapeAlive)
127 : */
128 0 : void releaseUnoShape() { m_xKeepShapeAlive.clear(); }
129 :
130 : static SdrObject* createObject(const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent);
131 : static sal_uInt16 getObjectType(const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent);
132 : };
133 :
134 : // OCustomShape
135 :
136 : class REPORTDESIGN_DLLPUBLIC OCustomShape: public SdrObjCustomShape , public OObjectBase
137 : {
138 : friend class OReportPage;
139 : friend class DlgEdFactory;
140 :
141 : public:
142 0 : static OCustomShape* Create( const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent )
143 : {
144 0 : return new OCustomShape( _xComponent );
145 : }
146 :
147 : protected:
148 : OCustomShape(const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent);
149 : OCustomShape(const OUString& _sComponentName);
150 :
151 : virtual void NbcMove( const Size& rSize ) SAL_OVERRIDE;
152 : virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) SAL_OVERRIDE;
153 : virtual void NbcSetLogicRect(const Rectangle& rRect) SAL_OVERRIDE;
154 : virtual bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) SAL_OVERRIDE;
155 :
156 : virtual void SetSnapRectImpl(const Rectangle& _rRect) SAL_OVERRIDE;
157 : virtual SdrPage* GetImplPage() const SAL_OVERRIDE;
158 : void SetObjectItemHelper(const SfxPoolItem& rItem) SAL_OVERRIDE;
159 :
160 : public:
161 : TYPEINFO_OVERRIDE();
162 :
163 : virtual ~OCustomShape();
164 :
165 : virtual sal_Int32 GetStep() const;
166 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet> getAwtComponent() SAL_OVERRIDE;
167 :
168 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > getUnoShape() SAL_OVERRIDE;
169 : virtual sal_uInt16 GetObjIdentifier() const SAL_OVERRIDE;
170 : virtual sal_uInt32 GetObjInventor() const SAL_OVERRIDE;
171 :
172 : private:
173 : virtual void impl_setUnoShape( const ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface >& rxUnoShape ) SAL_OVERRIDE;
174 : };
175 :
176 :
177 : // OOle2Obj
178 :
179 : class REPORTDESIGN_DLLPUBLIC OOle2Obj: public SdrOle2Obj , public OObjectBase
180 : {
181 : friend class OReportPage;
182 : friend class DlgEdFactory;
183 :
184 : sal_uInt16 m_nType;
185 : bool m_bOnlyOnce;
186 : void impl_createDataProvider_nothrow( const ::com::sun::star::uno::Reference< ::com::sun::star::frame::XModel>& _xModel);
187 : virtual void impl_setUnoShape( const ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface >& rxUnoShape ) SAL_OVERRIDE;
188 :
189 : public:
190 0 : static OOle2Obj* Create( const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent,sal_uInt16 _nType )
191 : {
192 0 : return new OOle2Obj( _xComponent,_nType );
193 : }
194 : protected:
195 : OOle2Obj(const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent,sal_uInt16 _nType);
196 : OOle2Obj(const OUString& _sComponentName,sal_uInt16 _nType);
197 :
198 :
199 : virtual void NbcMove( const Size& rSize ) SAL_OVERRIDE;
200 : virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) SAL_OVERRIDE;
201 : virtual void NbcSetLogicRect(const Rectangle& rRect) SAL_OVERRIDE;
202 : virtual bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) SAL_OVERRIDE;
203 :
204 : virtual void SetSnapRectImpl(const Rectangle& _rRect) SAL_OVERRIDE;
205 : virtual SdrPage* GetImplPage() const SAL_OVERRIDE;
206 :
207 : public:
208 : TYPEINFO_OVERRIDE();
209 :
210 : virtual ~OOle2Obj();
211 :
212 : virtual sal_Int32 GetStep() const;
213 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet> getAwtComponent() SAL_OVERRIDE;
214 :
215 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > getUnoShape() SAL_OVERRIDE;
216 : virtual sal_uInt16 GetObjIdentifier() const SAL_OVERRIDE;
217 : virtual sal_uInt32 GetObjInventor() const SAL_OVERRIDE;
218 : // Clone() soll eine komplette Kopie des Objektes erzeugen.
219 : virtual OOle2Obj* Clone() const SAL_OVERRIDE;
220 : virtual void initializeOle() SAL_OVERRIDE;
221 :
222 : OOle2Obj& operator=(const OOle2Obj& rObj);
223 :
224 : void initializeChart( const ::com::sun::star::uno::Reference< ::com::sun::star::frame::XModel>& _xModel);
225 : };
226 :
227 :
228 : // OUnoObject
229 :
230 : class REPORTDESIGN_DLLPUBLIC OUnoObject: public SdrUnoObj , public OObjectBase
231 : {
232 : friend class OReportPage;
233 : friend class OObjectBase;
234 : friend class DlgEdFactory;
235 :
236 : sal_uInt16 m_nObjectType;
237 : protected:
238 : OUnoObject(const OUString& _sComponentName
239 : ,const OUString& rModelName
240 : ,sal_uInt16 _nObjectType);
241 : OUnoObject( const ::com::sun::star::uno::Reference< ::com::sun::star::report::XReportComponent>& _xComponent
242 : ,const OUString& rModelName
243 : ,sal_uInt16 _nObjectType);
244 :
245 : virtual ~OUnoObject();
246 :
247 : virtual void NbcMove( const Size& rSize ) SAL_OVERRIDE;
248 : virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) SAL_OVERRIDE;
249 : virtual void NbcSetLogicRect(const Rectangle& rRect) SAL_OVERRIDE;
250 : virtual bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) SAL_OVERRIDE;
251 :
252 : virtual void SetSnapRectImpl(const Rectangle& _rRect) SAL_OVERRIDE;
253 : virtual SdrPage* GetImplPage() const SAL_OVERRIDE;
254 :
255 : public:
256 : TYPEINFO_OVERRIDE();
257 :
258 : virtual sal_Int32 GetStep() const;
259 : virtual void _propertyChange( const ::com::sun::star::beans::PropertyChangeEvent& evt ) throw(::com::sun::star::uno::RuntimeException) SAL_OVERRIDE;
260 :
261 : /** creates the m_xMediator when it doesn't already exist.
262 : @param _bReverse when set to <TRUE/> then the properties from the uno control will be copied into report control
263 : */
264 : void CreateMediator(sal_Bool _bReverse = sal_False);
265 :
266 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::beans::XPropertySet> getAwtComponent() SAL_OVERRIDE;
267 :
268 : static OUString GetDefaultName(const OUnoObject* _pObj);
269 :
270 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > getUnoShape() SAL_OVERRIDE;
271 : virtual sal_uInt16 GetObjIdentifier() const SAL_OVERRIDE;
272 : virtual sal_uInt32 GetObjInventor() const SAL_OVERRIDE;
273 : virtual OUnoObject* Clone() const SAL_OVERRIDE;
274 :
275 : OUnoObject& operator=(const OUnoObject& rObj);
276 :
277 : private:
278 : virtual void impl_setUnoShape( const ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface >& rxUnoShape ) SAL_OVERRIDE;
279 : void impl_setReportComponent_nothrow();
280 : void impl_initializeModel_nothrow();
281 : };
282 :
283 :
284 : } // rptui
285 :
286 : #endif // _REPORT_RPTUIOBJ_HXX
287 :
288 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
