Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 :
21 : #include "fuconcustomshape.hxx"
22 : #include <editeng/svxenum.hxx>
23 : #include <svx/gallery.hxx>
24 : #include <sfx2/request.hxx>
25 : #include <svx/fmmodel.hxx>
26 : #include <svl/itempool.hxx>
27 : #include <svx/svdpage.hxx>
28 : #include <svx/svdoashp.hxx>
29 : #include <editeng/eeitem.hxx>
30 : #include <svx/sdtagitm.hxx>
31 : #include "fuconuno.hxx"
32 : #include "tabvwsh.hxx"
33 : #include "sc.hrc"
34 : #include "drawview.hxx"
35 : #include <editeng/adjustitem.hxx>
36 :
37 : #include <math.h>
38 :
39 0 : FuConstCustomShape::FuConstCustomShape( ScTabViewShell* pViewSh, Window* pWin, ScDrawView* pViewP, SdrModel* pDoc, SfxRequest& rReq )
40 0 : : FuConstruct( pViewSh, pWin, pViewP, pDoc, rReq )
41 : {
42 0 : const SfxItemSet* pArgs = rReq.GetArgs();
43 0 : if ( pArgs )
44 : {
45 0 : const SfxStringItem& rItm = (const SfxStringItem&)pArgs->Get( rReq.GetSlot() );
46 0 : aCustomShape = rItm.GetValue();
47 : }
48 0 : }
49 :
50 : /*************************************************************************
51 : |*
52 : |* Destruktor
53 : |*
54 : \************************************************************************/
55 :
56 0 : FuConstCustomShape::~FuConstCustomShape()
57 : {
58 0 : }
59 :
60 : /*************************************************************************
61 : |*
62 : |* MouseButtonDown-event
63 : |*
64 : \************************************************************************/
65 :
66 0 : bool FuConstCustomShape::MouseButtonDown(const MouseEvent& rMEvt)
67 : {
68 : // remember button state for creation of own MouseEvents
69 0 : SetMouseButtonCode(rMEvt.GetButtons());
70 :
71 0 : bool bReturn = FuConstruct::MouseButtonDown(rMEvt);
72 0 : if ( rMEvt.IsLeft() && !pView->IsAction() )
73 : {
74 0 : Point aPnt( pWindow->PixelToLogic( rMEvt.GetPosPixel() ) );
75 : // Hack to align object to nearest grid position where object
76 : // would be anchored ( if it were cell anchored )
77 : // Get grid offset for current position ( note: aPnt is
78 : // also adjusted )
79 0 : Point aGridOff = CurrentGridSyncOffsetAndPos( aPnt );
80 :
81 0 : pWindow->CaptureMouse();
82 0 : pView->BegCreateObj(aPnt);
83 :
84 0 : SdrObject* pObj = pView->GetCreateObj();
85 0 : if ( pObj )
86 : {
87 0 : SetAttributes( pObj );
88 0 : sal_Bool bForceNoFillStyle = false;
89 0 : if ( ((SdrObjCustomShape*)pObj)->UseNoFillStyle() )
90 0 : bForceNoFillStyle = sal_True;
91 0 : if ( bForceNoFillStyle )
92 0 : pObj->SetMergedItem( XFillStyleItem( XFILL_NONE ) );
93 0 : pObj->SetGridOffset( aGridOff );
94 : }
95 :
96 0 : bReturn = true;
97 : }
98 0 : return bReturn;
99 : }
100 :
101 : /*************************************************************************
102 : |*
103 : |* MouseMove-event
104 : |*
105 : \************************************************************************/
106 :
107 0 : bool FuConstCustomShape::MouseMove(const MouseEvent& rMEvt)
108 : {
109 0 : return FuConstruct::MouseMove(rMEvt);
110 : }
111 :
112 : /*************************************************************************
113 : |*
114 : |* MouseButtonUp-event
115 : |*
116 : \************************************************************************/
117 :
118 0 : bool FuConstCustomShape::MouseButtonUp(const MouseEvent& rMEvt)
119 : {
120 : // remember button state for creation of own MouseEvents
121 0 : SetMouseButtonCode(rMEvt.GetButtons());
122 :
123 0 : bool bReturn = false;
124 :
125 0 : if ( pView->IsCreateObj() && rMEvt.IsLeft() )
126 : {
127 0 : pView->EndCreateObj(SDRCREATE_FORCEEND);
128 0 : bReturn = true;
129 : }
130 0 : return (FuConstruct::MouseButtonUp(rMEvt) || bReturn);
131 : }
132 :
133 : /*************************************************************************
134 : |*
135 : |* Tastaturereignisse bearbeiten
136 : |*
137 : |* Wird ein KeyEvent bearbeitet, so ist der Return-Wert sal_True, andernfalls
138 : |* FALSE.
139 : |*
140 : \************************************************************************/
141 :
142 0 : bool FuConstCustomShape::KeyInput(const KeyEvent& rKEvt)
143 : {
144 0 : return FuConstruct::KeyInput(rKEvt);
145 : }
146 :
147 : /*************************************************************************
148 : |*
149 : |* Function aktivieren
150 : |*
151 : \************************************************************************/
152 :
153 0 : void FuConstCustomShape::Activate()
154 : {
155 0 : pView->SetCurrentObj( OBJ_CUSTOMSHAPE, SdrInventor );
156 :
157 0 : aNewPointer = Pointer( POINTER_DRAW_RECT );
158 0 : aOldPointer = pWindow->GetPointer();
159 0 : pViewShell->SetActivePointer( aNewPointer );
160 :
161 0 : SdrLayer* pLayer = pView->GetModel()->GetLayerAdmin().GetLayerPerID(SC_LAYER_CONTROLS);
162 0 : if (pLayer)
163 0 : pView->SetActiveLayer( pLayer->GetName() );
164 :
165 0 : FuConstruct::Activate();
166 0 : }
167 :
168 : /*************************************************************************
169 : |*
170 : |* Function deaktivieren
171 : |*
172 : \************************************************************************/
173 :
174 0 : void FuConstCustomShape::Deactivate()
175 : {
176 0 : FuConstruct::Deactivate();
177 :
178 0 : SdrLayer* pLayer = pView->GetModel()->GetLayerAdmin().GetLayerPerID(SC_LAYER_FRONT);
179 0 : if (pLayer)
180 0 : pView->SetActiveLayer( pLayer->GetName() );
181 :
182 0 : pViewShell->SetActivePointer( aOldPointer );
183 0 : }
184 :
185 : // Create default drawing objects via keyboard
186 0 : SdrObject* FuConstCustomShape::CreateDefaultObject(const sal_uInt16 /* nID */, const Rectangle& rRectangle)
187 : {
188 : SdrObject* pObj = SdrObjFactory::MakeNewObject(
189 0 : pView->GetCurrentObjInventor(), pView->GetCurrentObjIdentifier(),
190 0 : 0L, pDrDoc);
191 0 : if( pObj )
192 : {
193 0 : Rectangle aRectangle( rRectangle );
194 0 : SetAttributes( pObj );
195 0 : if ( SdrObjCustomShape::doConstructOrthogonal( aCustomShape ) )
196 0 : ImpForceQuadratic( aRectangle );
197 0 : pObj->SetLogicRect( aRectangle );
198 : }
199 0 : return pObj;
200 : }
201 :
202 : /*************************************************************************
203 : |*
204 : |* applying attributes
205 : |*
206 : \************************************************************************/
207 :
208 0 : void FuConstCustomShape::SetAttributes( SdrObject* pObj )
209 : {
210 0 : sal_Bool bAttributesAppliedFromGallery = false;
211 :
212 0 : if ( GalleryExplorer::GetSdrObjCount( GALLERY_THEME_POWERPOINT ) )
213 : {
214 0 : std::vector< OUString > aObjList;
215 0 : if ( GalleryExplorer::FillObjListTitle( GALLERY_THEME_POWERPOINT, aObjList ) )
216 : {
217 : sal_uInt16 i;
218 0 : for ( i = 0; i < aObjList.size(); i++ )
219 : {
220 0 : if ( aObjList[ i ].equalsIgnoreAsciiCase( aCustomShape ) )
221 : {
222 0 : FmFormModel aFormModel;
223 0 : SfxItemPool& rPool = aFormModel.GetItemPool();
224 0 : rPool.FreezeIdRanges();
225 0 : if ( GalleryExplorer::GetSdrObj( GALLERY_THEME_POWERPOINT, i, &aFormModel ) )
226 : {
227 0 : const SdrObject* pSourceObj = aFormModel.GetPage( 0 )->GetObj( 0 );
228 0 : if( pSourceObj )
229 : {
230 0 : const SfxItemSet& rSource = pSourceObj->GetMergedItemSet();
231 0 : SfxItemSet aDest( pObj->GetModel()->GetItemPool(), // ranges from SdrAttrObj
232 : SDRATTR_START, SDRATTR_SHADOW_LAST,
233 : SDRATTR_MISC_FIRST, SDRATTR_MISC_LAST,
234 : SDRATTR_TEXTDIRECTION, SDRATTR_TEXTDIRECTION,
235 : // Graphic Attributes
236 : SDRATTR_GRAF_FIRST, SDRATTR_GRAF_LAST,
237 : // 3d Properties
238 : SDRATTR_3D_FIRST, SDRATTR_3D_LAST,
239 : // CustomShape properties
240 : SDRATTR_CUSTOMSHAPE_FIRST, SDRATTR_CUSTOMSHAPE_LAST,
241 : // range from SdrTextObj
242 : EE_ITEMS_START, EE_ITEMS_END,
243 : // end
244 0 : 0, 0);
245 0 : aDest.Set( rSource );
246 0 : pObj->SetMergedItemSet( aDest );
247 0 : sal_Int32 nAngle = pSourceObj->GetRotateAngle();
248 0 : if ( nAngle )
249 : {
250 0 : double a = nAngle * F_PI18000;
251 0 : pObj->NbcRotate( pObj->GetSnapRect().Center(), nAngle, sin( a ), cos( a ) );
252 : }
253 0 : bAttributesAppliedFromGallery = sal_True;
254 : }
255 : }
256 0 : break;
257 : }
258 : }
259 0 : }
260 : }
261 0 : if ( !bAttributesAppliedFromGallery )
262 : {
263 0 : pObj->SetMergedItem( SvxAdjustItem( SVX_ADJUST_CENTER, 0 ) );
264 0 : pObj->SetMergedItem( SdrTextVertAdjustItem( SDRTEXTVERTADJUST_CENTER ) );
265 0 : pObj->SetMergedItem( SdrTextHorzAdjustItem( SDRTEXTHORZADJUST_BLOCK ) );
266 0 : pObj->SetMergedItem( SdrTextAutoGrowHeightItem( false ) );
267 0 : ((SdrObjCustomShape*)pObj)->MergeDefaultAttributes( &aCustomShape );
268 : }
269 0 : }
270 :
271 : // #i33136#
272 0 : bool FuConstCustomShape::doConstructOrthogonal() const
273 : {
274 0 : return SdrObjCustomShape::doConstructOrthogonal(aCustomShape);
275 0 : }
276 :
277 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
