Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "scitems.hxx"
21 : #include <svx/fmdpage.hxx>
22 : #include <svx/fmview.hxx>
23 : #include <svx/svditer.hxx>
24 : #include <svx/svdpage.hxx>
25 : #include <svx/svxids.hrc>
26 : #include <svx/unoshape.hxx>
27 :
28 : #include <officecfg/Office/Common.hxx>
29 : #include <svl/numuno.hxx>
30 : #include <svl/smplhint.hxx>
31 : #include <unotools/moduleoptions.hxx>
32 : #include <sfx2/printer.hxx>
33 : #include <sfx2/bindings.hxx>
34 : #include <vcl/pdfextoutdevdata.hxx>
35 : #include <vcl/waitobj.hxx>
36 : #include <unotools/charclass.hxx>
37 : #include <tools/multisel.hxx>
38 : #include <tools/resary.hxx>
39 : #include <toolkit/awt/vclxdevice.hxx>
40 :
41 : #include <ctype.h>
42 : #include <float.h>
43 :
44 : #include <com/sun/star/util/Date.hpp>
45 : #include <com/sun/star/sheet/XNamedRanges.hpp>
46 : #include <com/sun/star/sheet/XLabelRanges.hpp>
47 : #include <com/sun/star/sheet/XSelectedSheetsSupplier.hpp>
48 : #include <com/sun/star/sheet/XUnnamedDatabaseRanges.hpp>
49 : #include <com/sun/star/i18n/XForbiddenCharacters.hpp>
50 : #include <com/sun/star/script/XLibraryContainer.hpp>
51 : #include <com/sun/star/lang/XInitialization.hpp>
52 : #include <com/sun/star/lang/ServiceNotRegisteredException.hpp>
53 : #include <com/sun/star/document/XDocumentEventBroadcaster.hpp>
54 : #include <com/sun/star/document/IndexedPropertyValues.hpp>
55 : #include <com/sun/star/script/XInvocation.hpp>
56 : #include <com/sun/star/script/vba/XVBAEventProcessor.hpp>
57 : #include <comphelper/processfactory.hxx>
58 : #include <comphelper/servicehelper.hxx>
59 : #include <comphelper/string.hxx>
60 : #include <cppuhelper/supportsservice.hxx>
61 :
62 : #include "docuno.hxx"
63 : #include "cellsuno.hxx"
64 : #include "nameuno.hxx"
65 : #include "datauno.hxx"
66 : #include "miscuno.hxx"
67 : #include "notesuno.hxx"
68 : #include "styleuno.hxx"
69 : #include "linkuno.hxx"
70 : #include "servuno.hxx"
71 : #include "targuno.hxx"
72 : #include "convuno.hxx"
73 : #include "optuno.hxx"
74 : #include "forbiuno.hxx"
75 : #include "docsh.hxx"
76 : #include "hints.hxx"
77 : #include "docfunc.hxx"
78 : #include "postit.hxx"
79 : #include "dociter.hxx"
80 : #include "formulacell.hxx"
81 : #include "drwlayer.hxx"
82 : #include "rangeutl.hxx"
83 : #include "markdata.hxx"
84 : #include "docoptio.hxx"
85 : #include "unonames.hxx"
86 : #include "shapeuno.hxx"
87 : #include "viewuno.hxx"
88 : #include "tabvwsh.hxx"
89 : #include "printfun.hxx"
90 : #include "pfuncache.hxx"
91 : #include "scmod.hxx"
92 : #include "ViewSettingsSequenceDefines.hxx"
93 : #include "sheetevents.hxx"
94 : #include "sc.hrc"
95 : #include "scresid.hxx"
96 : #include "platforminfo.hxx"
97 : #include "interpre.hxx"
98 : #include "formulagroup.hxx"
99 : #include <columnspanset.hxx>
100 :
101 : using namespace com::sun::star;
102 :
103 : // #i111553# provides the name of the VBA constant for this document type (e.g. 'ThisExcelDoc' for Calc)
104 : #define SC_UNO_VBAGLOBNAME "VBAGlobalConstantName"
105 :
106 : // alles ohne Which-ID, Map nur fuer PropertySetInfo
107 :
108 : //! umbenennen, sind nicht mehr nur Options
109 0 : static const SfxItemPropertyMapEntry* lcl_GetDocOptPropertyMap()
110 : {
111 : static const SfxItemPropertyMapEntry aDocOptPropertyMap_Impl[] =
112 : {
113 0 : {OUString(SC_UNO_APPLYFMDES), 0, getBooleanCppuType(), 0, 0},
114 0 : {OUString(SC_UNO_AREALINKS), 0, getCppuType((uno::Reference<sheet::XAreaLinks>*)0), 0, 0},
115 0 : {OUString(SC_UNO_AUTOCONTFOC), 0, getBooleanCppuType(), 0, 0},
116 0 : {OUString(SC_UNO_BASICLIBRARIES), 0, getCppuType((uno::Reference< script::XLibraryContainer >*)0), beans::PropertyAttribute::READONLY, 0},
117 0 : {OUString(SC_UNO_DIALOGLIBRARIES), 0, getCppuType((uno::Reference< script::XLibraryContainer >*)0), beans::PropertyAttribute::READONLY, 0},
118 0 : {OUString(SC_UNO_VBAGLOBNAME), 0, getCppuType(static_cast< const OUString * >(0)), beans::PropertyAttribute::READONLY, 0},
119 0 : {OUString(SC_UNO_CALCASSHOWN), PROP_UNO_CALCASSHOWN, getBooleanCppuType(), 0, 0},
120 0 : {OUString(SC_UNONAME_CLOCAL), 0, getCppuType((lang::Locale*)0), 0, 0},
121 0 : {OUString(SC_UNO_CJK_CLOCAL), 0, getCppuType((lang::Locale*)0), 0, 0},
122 0 : {OUString(SC_UNO_CTL_CLOCAL), 0, getCppuType((lang::Locale*)0), 0, 0},
123 0 : {OUString(SC_UNO_COLLABELRNG), 0, getCppuType((uno::Reference<sheet::XLabelRanges>*)0), 0, 0},
124 0 : {OUString(SC_UNO_DDELINKS), 0, getCppuType((uno::Reference<container::XNameAccess>*)0), 0, 0},
125 0 : {OUString(SC_UNO_DEFTABSTOP), PROP_UNO_DEFTABSTOP, getCppuType((sal_Int16*)0), 0, 0},
126 0 : {OUString(SC_UNO_EXTERNALDOCLINKS), 0, getCppuType((uno::Reference<sheet::XExternalDocLinks>*)0), 0, 0},
127 0 : {OUString(SC_UNO_FORBIDDEN), 0, getCppuType((uno::Reference<i18n::XForbiddenCharacters>*)0), beans::PropertyAttribute::READONLY, 0},
128 0 : {OUString(SC_UNO_HASDRAWPAGES), 0, getBooleanCppuType(), beans::PropertyAttribute::READONLY, 0},
129 0 : {OUString(SC_UNO_IGNORECASE), PROP_UNO_IGNORECASE, getBooleanCppuType(), 0, 0},
130 0 : {OUString(SC_UNO_ITERENABLED), PROP_UNO_ITERENABLED, getBooleanCppuType(), 0, 0},
131 0 : {OUString(SC_UNO_ITERCOUNT), PROP_UNO_ITERCOUNT, getCppuType((sal_Int32*)0), 0, 0},
132 0 : {OUString(SC_UNO_ITEREPSILON), PROP_UNO_ITEREPSILON, getCppuType((double*)0), 0, 0},
133 0 : {OUString(SC_UNO_LOOKUPLABELS), PROP_UNO_LOOKUPLABELS, getBooleanCppuType(), 0, 0},
134 0 : {OUString(SC_UNO_MATCHWHOLE), PROP_UNO_MATCHWHOLE, getBooleanCppuType(), 0, 0},
135 0 : {OUString(SC_UNO_NAMEDRANGES), 0, getCppuType((uno::Reference<sheet::XNamedRanges>*)0), 0, 0},
136 0 : {OUString(SC_UNO_DATABASERNG), 0, getCppuType((uno::Reference<sheet::XDatabaseRanges>*)0), 0, 0},
137 0 : {OUString(SC_UNO_NULLDATE), PROP_UNO_NULLDATE, getCppuType((util::Date*)0), 0, 0},
138 0 : {OUString(SC_UNO_ROWLABELRNG), 0, getCppuType((uno::Reference<sheet::XLabelRanges>*)0), 0, 0},
139 0 : {OUString(SC_UNO_SHEETLINKS), 0, getCppuType((uno::Reference<container::XNameAccess>*)0), 0, 0},
140 0 : {OUString(SC_UNO_SPELLONLINE), PROP_UNO_SPELLONLINE, getBooleanCppuType(), 0, 0},
141 0 : {OUString(SC_UNO_STANDARDDEC), PROP_UNO_STANDARDDEC, getCppuType((sal_Int16*)0), 0, 0},
142 0 : {OUString(SC_UNO_REGEXENABLED), PROP_UNO_REGEXENABLED, getBooleanCppuType(), 0, 0},
143 0 : {OUString(SC_UNO_RUNTIMEUID), 0, getCppuType(static_cast< const OUString * >(0)), beans::PropertyAttribute::READONLY, 0},
144 0 : {OUString(SC_UNO_HASVALIDSIGNATURES), 0, getBooleanCppuType(), beans::PropertyAttribute::READONLY, 0},
145 0 : {OUString(SC_UNO_ISLOADED), 0, getBooleanCppuType(), 0, 0},
146 0 : {OUString(SC_UNO_ISUNDOENABLED), 0, getBooleanCppuType(), 0, 0},
147 0 : {OUString(SC_UNO_ISADJUSTHEIGHTENABLED), 0, getBooleanCppuType(), 0, 0},
148 0 : {OUString(SC_UNO_ISEXECUTELINKENABLED), 0, getBooleanCppuType(), 0, 0},
149 0 : {OUString(SC_UNO_ISCHANGEREADONLYENABLED), 0, getBooleanCppuType(), 0, 0},
150 0 : {OUString(SC_UNO_REFERENCEDEVICE), 0, getCppuType((uno::Reference<awt::XDevice>*)0), beans::PropertyAttribute::READONLY, 0},
151 0 : {OUString("BuildId"), 0, ::getCppuType(static_cast< const OUString * >(0)), 0, 0},
152 0 : {OUString(SC_UNO_CODENAME), 0, getCppuType(static_cast< const OUString * >(0)), 0, 0},
153 0 : {OUString(SC_UNO_INTEROPGRABBAG), 0, ::getCppuType((uno::Sequence< beans::PropertyValue >*)0), 0, 0},
154 : { OUString(), 0, css::uno::Type(), 0, 0 }
155 0 : };
156 0 : return aDocOptPropertyMap_Impl;
157 : }
158 :
159 : //! StandardDecimals als Property und vom NumberFormatter ????????
160 :
161 0 : static const SfxItemPropertyMapEntry* lcl_GetColumnsPropertyMap()
162 : {
163 : static const SfxItemPropertyMapEntry aColumnsPropertyMap_Impl[] =
164 : {
165 0 : {OUString(SC_UNONAME_MANPAGE), 0, getBooleanCppuType(), 0, 0 },
166 0 : {OUString(SC_UNONAME_NEWPAGE), 0, getBooleanCppuType(), 0, 0 },
167 0 : {OUString(SC_UNONAME_CELLVIS), 0, getBooleanCppuType(), 0, 0 },
168 0 : {OUString(SC_UNONAME_OWIDTH), 0, getBooleanCppuType(), 0, 0 },
169 0 : {OUString(SC_UNONAME_CELLWID), 0, getCppuType((sal_Int32*)0), 0, 0 },
170 : { OUString(), 0, css::uno::Type(), 0, 0 }
171 0 : };
172 0 : return aColumnsPropertyMap_Impl;
173 : }
174 :
175 0 : static const SfxItemPropertyMapEntry* lcl_GetRowsPropertyMap()
176 : {
177 : static const SfxItemPropertyMapEntry aRowsPropertyMap_Impl[] =
178 : {
179 0 : {OUString(SC_UNONAME_CELLHGT), 0, getCppuType((sal_Int32*)0), 0, 0 },
180 0 : {OUString(SC_UNONAME_CELLFILT), 0, getBooleanCppuType(), 0, 0 },
181 0 : {OUString(SC_UNONAME_OHEIGHT), 0, getBooleanCppuType(), 0, 0 },
182 0 : {OUString(SC_UNONAME_MANPAGE), 0, getBooleanCppuType(), 0, 0 },
183 0 : {OUString(SC_UNONAME_NEWPAGE), 0, getBooleanCppuType(), 0, 0 },
184 0 : {OUString(SC_UNONAME_CELLVIS), 0, getBooleanCppuType(), 0, 0 },
185 0 : {OUString(SC_UNONAME_CELLBACK), ATTR_BACKGROUND, ::getCppuType((const sal_Int32*)0), 0, MID_BACK_COLOR },
186 0 : {OUString(SC_UNONAME_CELLTRAN), ATTR_BACKGROUND, ::getBooleanCppuType(), 0, MID_GRAPHIC_TRANSPARENT },
187 : // not sorted, not used with SfxItemPropertyMapEntry::GetByName
188 : { OUString(), 0, css::uno::Type(), 0, 0 }
189 0 : };
190 0 : return aRowsPropertyMap_Impl;
191 : }
192 :
193 : using sc::HMMToTwips;
194 : using sc::TwipsToHMM;
195 :
196 : #define SCMODELOBJ_SERVICE "com.sun.star.sheet.SpreadsheetDocument"
197 : #define SCDOCSETTINGS_SERVICE "com.sun.star.sheet.SpreadsheetDocumentSettings"
198 : #define SCDOC_SERVICE "com.sun.star.document.OfficeDocument"
199 :
200 0 : SC_SIMPLE_SERVICE_INFO( ScAnnotationsObj, "ScAnnotationsObj", "com.sun.star.sheet.CellAnnotations" )
201 0 : SC_SIMPLE_SERVICE_INFO( ScDrawPagesObj, "ScDrawPagesObj", "com.sun.star.drawing.DrawPages" )
202 0 : SC_SIMPLE_SERVICE_INFO( ScScenariosObj, "ScScenariosObj", "com.sun.star.sheet.Scenarios" )
203 0 : SC_SIMPLE_SERVICE_INFO( ScSpreadsheetSettingsObj, "ScSpreadsheetSettingsObj", "com.sun.star.sheet.SpreadsheetDocumentSettings" )
204 0 : SC_SIMPLE_SERVICE_INFO( ScTableColumnsObj, "ScTableColumnsObj", "com.sun.star.table.TableColumns" )
205 0 : SC_SIMPLE_SERVICE_INFO( ScTableRowsObj, "ScTableRowsObj", "com.sun.star.table.TableRows" )
206 0 : SC_SIMPLE_SERVICE_INFO( ScTableSheetsObj, "ScTableSheetsObj", "com.sun.star.sheet.Spreadsheets" )
207 :
208 0 : class ScPrintUIOptions : public vcl::PrinterOptionsHelper
209 : {
210 : public:
211 : ScPrintUIOptions();
212 : void SetDefaults();
213 : };
214 :
215 0 : ScPrintUIOptions::ScPrintUIOptions()
216 : {
217 0 : const ScPrintOptions& rPrintOpt = SC_MOD()->GetPrintOptions();
218 0 : sal_Int32 nContent = rPrintOpt.GetAllSheets() ? 0 : 1;
219 0 : sal_Bool bSuppress = rPrintOpt.GetSkipEmpty();
220 :
221 0 : ResStringArray aStrings( ScResId( SCSTR_PRINT_OPTIONS ) );
222 : OSL_ENSURE( aStrings.Count() >= 10, "resource incomplete" );
223 0 : if( aStrings.Count() < 10 ) // bad resource ?
224 0 : return;
225 :
226 0 : sal_Int32 nNumProps= 9, nIdx = 0;
227 :
228 0 : m_aUIProperties.realloc(nNumProps);
229 :
230 : // load the writer PrinterOptions into the custom tab
231 0 : m_aUIProperties[nIdx].Name = "OptionsUIFile";
232 0 : m_aUIProperties[nIdx++].Value <<= OUString("modules/scalc/ui/printeroptions.ui");
233 :
234 : // create Section for spreadsheet (results in an extra tab page in dialog)
235 0 : SvtModuleOptions aOpt;
236 0 : OUString aAppGroupname( aStrings.GetString( 9 ) );
237 0 : aAppGroupname = aAppGroupname.replaceFirst( "%s", aOpt.GetModuleName( SvtModuleOptions::E_SCALC ) );
238 0 : m_aUIProperties[nIdx++].Value = setGroupControlOpt("tabcontrol-page2", aAppGroupname, OUString());
239 :
240 : // show subgroup for pages
241 0 : m_aUIProperties[nIdx++].Value = setSubgroupControlOpt("pages", OUString(aStrings.GetString(0)), OUString());
242 :
243 : // create a bool option for empty pages
244 0 : m_aUIProperties[nIdx++].Value = setBoolControlOpt("includeemptypages", OUString( aStrings.GetString( 1 ) ),
245 : ".HelpID:vcl:PrintDialog:IsIncludeEmptyPages:CheckBox",
246 : "IsIncludeEmptyPages",
247 0 : ! bSuppress);
248 : // show Subgroup for print content
249 0 : vcl::PrinterOptionsHelper::UIControlOptions aPrintRangeOpt;
250 0 : aPrintRangeOpt.maGroupHint = "PrintRange";
251 0 : m_aUIProperties[nIdx++].Value = setSubgroupControlOpt("printrange", OUString(aStrings.GetString(2)),
252 : OUString(),
253 0 : aPrintRangeOpt);
254 :
255 : // create a choice for the content to create
256 0 : uno::Sequence< OUString > aChoices( 3 ), aHelpIds( 3 ), aWidgetIds( 3 );
257 0 : aChoices[0] = aStrings.GetString( 3 );
258 0 : aHelpIds[0] = ".HelpID:vcl:PrintDialog:PrintContent:RadioButton:0";
259 0 : aWidgetIds[0] = "printallsheets";
260 0 : aChoices[1] = aStrings.GetString( 4 );
261 0 : aHelpIds[1] = ".HelpID:vcl:PrintDialog:PrintContent:RadioButton:1";
262 0 : aWidgetIds[1] = "printselectedsheets";
263 0 : aChoices[2] = aStrings.GetString( 5 );
264 0 : aHelpIds[2] = ".HelpID:vcl:PrintDialog:PrintContent:RadioButton:2";
265 0 : aWidgetIds[2] = "printselectedcells";
266 0 : m_aUIProperties[nIdx++].Value = setChoiceRadiosControlOpt(aWidgetIds, OUString(),
267 : aHelpIds, "PrintContent",
268 0 : aChoices, nContent );
269 :
270 : // show Subgroup for print range
271 0 : aPrintRangeOpt.mbInternalOnly = true;
272 0 : m_aUIProperties[nIdx++].Value = setSubgroupControlOpt("fromwhich", OUString(aStrings.GetString(6)),
273 : OUString(),
274 0 : aPrintRangeOpt);
275 :
276 : // create a choice for the range to print
277 0 : OUString aPrintRangeName( "PrintRange" );
278 0 : aChoices.realloc( 2 );
279 0 : aHelpIds.realloc( 2 );
280 0 : aWidgetIds.realloc( 2 );
281 0 : aChoices[0] = aStrings.GetString( 7 );
282 0 : aHelpIds[0] = ".HelpID:vcl:PrintDialog:PrintRange:RadioButton:0";
283 0 : aWidgetIds[0] = "printallpages";
284 0 : aChoices[1] = aStrings.GetString( 8 );
285 0 : aHelpIds[1] = ".HelpID:vcl:PrintDialog:PrintRange:RadioButton:1";
286 0 : aWidgetIds[1] = "printpages";
287 0 : m_aUIProperties[nIdx++].Value = setChoiceRadiosControlOpt(aWidgetIds, OUString(),
288 : aHelpIds,
289 : aPrintRangeName,
290 : aChoices,
291 0 : 0 );
292 :
293 : // create a an Edit dependent on "Pages" selected
294 0 : vcl::PrinterOptionsHelper::UIControlOptions aPageRangeOpt( aPrintRangeName, 1, true );
295 0 : m_aUIProperties[nIdx++].Value = setEditControlOpt("pagerange", OUString(),
296 : ".HelpID:vcl:PrintDialog:PageRange:Edit",
297 0 : "PageRange", OUString(), aPageRangeOpt);
298 :
299 0 : assert(nIdx == nNumProps);
300 : }
301 :
302 0 : void ScPrintUIOptions::SetDefaults()
303 : {
304 : // re-initialize the default values from print options
305 :
306 0 : const ScPrintOptions& rPrintOpt = SC_MOD()->GetPrintOptions();
307 0 : sal_Int32 nContent = rPrintOpt.GetAllSheets() ? 0 : 1;
308 0 : sal_Bool bSuppress = rPrintOpt.GetSkipEmpty();
309 :
310 0 : for (sal_Int32 nUIPos=0; nUIPos<m_aUIProperties.getLength(); ++nUIPos)
311 : {
312 0 : uno::Sequence<beans::PropertyValue> aUIProp;
313 0 : if ( m_aUIProperties[nUIPos].Value >>= aUIProp )
314 : {
315 0 : for (sal_Int32 nPropPos=0; nPropPos<aUIProp.getLength(); ++nPropPos)
316 : {
317 0 : OUString aName = aUIProp[nPropPos].Name;
318 0 : if ( aName == "Property" )
319 : {
320 0 : beans::PropertyValue aPropertyValue;
321 0 : if ( aUIProp[nPropPos].Value >>= aPropertyValue )
322 : {
323 0 : if ( aPropertyValue.Name == "PrintContent" )
324 : {
325 0 : aPropertyValue.Value <<= nContent;
326 0 : aUIProp[nPropPos].Value <<= aPropertyValue;
327 : }
328 0 : else if ( aPropertyValue.Name == "IsIncludeEmptyPages" )
329 : {
330 0 : ScUnoHelpFunctions::SetBoolInAny( aPropertyValue.Value, ! bSuppress );
331 0 : aUIProp[nPropPos].Value <<= aPropertyValue;
332 : }
333 0 : }
334 : }
335 0 : }
336 0 : m_aUIProperties[nUIPos].Value <<= aUIProp;
337 : }
338 0 : }
339 0 : }
340 :
341 0 : void ScModelObj::CreateAndSet(ScDocShell* pDocSh)
342 : {
343 0 : if (pDocSh)
344 0 : pDocSh->SetBaseModel( new ScModelObj(pDocSh) );
345 0 : }
346 :
347 0 : ScModelObj::ScModelObj( ScDocShell* pDocSh ) :
348 : SfxBaseModel( pDocSh ),
349 : aPropSet( lcl_GetDocOptPropertyMap() ),
350 : pDocShell( pDocSh ),
351 : pPrintFuncCache( NULL ),
352 : pPrinterOptions( NULL ),
353 0 : maChangesListeners( m_aMutex )
354 : {
355 : // pDocShell may be NULL if this is the base of a ScDocOptionsObj
356 0 : if ( pDocShell )
357 : {
358 0 : pDocShell->GetDocument()->AddUnoObject(*this); // SfxModel is derived from SfxListener
359 : }
360 0 : }
361 :
362 0 : ScModelObj::~ScModelObj()
363 : {
364 0 : if (pDocShell)
365 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
366 :
367 0 : if (xNumberAgg.is())
368 0 : xNumberAgg->setDelegator(uno::Reference<uno::XInterface>());
369 :
370 0 : delete pPrintFuncCache;
371 0 : delete pPrinterOptions;
372 0 : }
373 :
374 0 : uno::Reference< uno::XAggregation> ScModelObj::GetFormatter()
375 : {
376 : // pDocShell may be NULL if this is the base of a ScDocOptionsObj
377 0 : if ( !xNumberAgg.is() && pDocShell )
378 : {
379 : // setDelegator veraendert den RefCount, darum eine Referenz selber halten
380 : // (direkt am m_refCount, um sich beim release nicht selbst zu loeschen)
381 0 : comphelper::increment( m_refCount );
382 : // waehrend des queryInterface braucht man ein Ref auf das
383 : // SvNumberFormatsSupplierObj, sonst wird es geloescht.
384 0 : uno::Reference<util::XNumberFormatsSupplier> xFormatter(new SvNumberFormatsSupplierObj(pDocShell->GetDocument()->GetFormatTable() ));
385 : {
386 0 : xNumberAgg.set(uno::Reference<uno::XAggregation>( xFormatter, uno::UNO_QUERY ));
387 : // extra block to force deletion of the temporary before setDelegator
388 : }
389 :
390 : // beim setDelegator darf die zusaetzliche Ref nicht mehr existieren
391 0 : xFormatter = NULL;
392 :
393 0 : if (xNumberAgg.is())
394 0 : xNumberAgg->setDelegator( (cppu::OWeakObject*)this );
395 0 : comphelper::decrement( m_refCount );
396 : } // if ( !xNumberAgg.is() )
397 0 : return xNumberAgg;
398 : }
399 :
400 0 : ScDocument* ScModelObj::GetDocument() const
401 : {
402 0 : if (pDocShell)
403 0 : return pDocShell->GetDocument();
404 0 : return NULL;
405 : }
406 :
407 0 : SfxObjectShell* ScModelObj::GetEmbeddedObject() const
408 : {
409 0 : return pDocShell;
410 : }
411 :
412 0 : void ScModelObj::UpdateAllRowHeights()
413 : {
414 0 : if (pDocShell)
415 0 : pDocShell->UpdateAllRowHeights(NULL);
416 0 : }
417 :
418 0 : void ScModelObj::BeforeXMLLoading()
419 : {
420 0 : if (pDocShell)
421 0 : pDocShell->BeforeXMLLoading();
422 0 : }
423 :
424 0 : void ScModelObj::AfterXMLLoading(bool bRet)
425 : {
426 0 : if (pDocShell)
427 0 : pDocShell->AfterXMLLoading(bRet);
428 0 : }
429 :
430 0 : ScSheetSaveData* ScModelObj::GetSheetSaveData()
431 : {
432 0 : if (pDocShell)
433 0 : return pDocShell->GetSheetSaveData();
434 0 : return NULL;
435 : }
436 :
437 0 : void ScModelObj::RepaintRange( const ScRange& rRange )
438 : {
439 0 : if (pDocShell)
440 0 : pDocShell->PostPaint( rRange, PAINT_GRID );
441 0 : }
442 :
443 0 : void ScModelObj::RepaintRange( const ScRangeList& rRange )
444 : {
445 0 : if (pDocShell)
446 0 : pDocShell->PostPaint( rRange, PAINT_GRID );
447 0 : }
448 :
449 0 : uno::Any SAL_CALL ScModelObj::queryInterface( const uno::Type& rType )
450 : throw(uno::RuntimeException, std::exception)
451 : {
452 0 : SC_QUERYINTERFACE( sheet::XSpreadsheetDocument )
453 0 : SC_QUERYINTERFACE( document::XActionLockable )
454 0 : SC_QUERYINTERFACE( sheet::XCalculatable )
455 0 : SC_QUERYINTERFACE( util::XProtectable )
456 0 : SC_QUERYINTERFACE( drawing::XDrawPagesSupplier )
457 0 : SC_QUERYINTERFACE( sheet::XGoalSeek )
458 0 : SC_QUERYINTERFACE( sheet::XConsolidatable )
459 0 : SC_QUERYINTERFACE( sheet::XDocumentAuditing )
460 0 : SC_QUERYINTERFACE( style::XStyleFamiliesSupplier )
461 0 : SC_QUERYINTERFACE( view::XRenderable )
462 0 : SC_QUERYINTERFACE( document::XLinkTargetSupplier )
463 0 : SC_QUERYINTERFACE( beans::XPropertySet )
464 0 : SC_QUERYINTERFACE( lang::XMultiServiceFactory )
465 0 : SC_QUERYINTERFACE( lang::XServiceInfo )
466 0 : SC_QUERYINTERFACE( util::XChangesNotifier )
467 0 : SC_QUERYINTERFACE( sheet::opencl::XOpenCLSelection )
468 :
469 0 : uno::Any aRet(SfxBaseModel::queryInterface( rType ));
470 0 : if ( !aRet.hasValue()
471 0 : && rType != ::getCppuType((uno::Reference< com::sun::star::document::XDocumentEventBroadcaster>*)0)
472 0 : && rType != ::getCppuType((uno::Reference< com::sun::star::frame::XController>*)0)
473 0 : && rType != ::getCppuType((uno::Reference< com::sun::star::frame::XFrame>*)0)
474 0 : && rType != ::getCppuType((uno::Reference< com::sun::star::script::XInvocation>*)0)
475 0 : && rType != ::getCppuType((uno::Reference< com::sun::star::beans::XFastPropertySet>*)0)
476 0 : && rType != ::getCppuType((uno::Reference< com::sun::star::awt::XWindow>*)0))
477 : {
478 0 : GetFormatter();
479 0 : if ( xNumberAgg.is() )
480 0 : aRet = xNumberAgg->queryAggregation( rType );
481 : }
482 :
483 0 : return aRet;
484 : }
485 :
486 0 : void SAL_CALL ScModelObj::acquire() throw()
487 : {
488 0 : SfxBaseModel::acquire();
489 0 : }
490 :
491 0 : void SAL_CALL ScModelObj::release() throw()
492 : {
493 0 : SfxBaseModel::release();
494 0 : }
495 :
496 0 : uno::Sequence<uno::Type> SAL_CALL ScModelObj::getTypes() throw(uno::RuntimeException, std::exception)
497 : {
498 0 : static uno::Sequence<uno::Type> aTypes;
499 0 : if ( aTypes.getLength() == 0 )
500 : {
501 0 : uno::Sequence<uno::Type> aParentTypes(SfxBaseModel::getTypes());
502 0 : long nParentLen = aParentTypes.getLength();
503 0 : const uno::Type* pParentPtr = aParentTypes.getConstArray();
504 :
505 0 : uno::Sequence<uno::Type> aAggTypes;
506 0 : if ( GetFormatter().is() )
507 : {
508 0 : const uno::Type& rProvType = ::getCppuType((uno::Reference<lang::XTypeProvider>*) 0);
509 0 : uno::Any aNumProv(xNumberAgg->queryAggregation(rProvType));
510 0 : if(aNumProv.getValueType() == rProvType)
511 : {
512 : uno::Reference<lang::XTypeProvider> xNumProv(
513 0 : *(uno::Reference<lang::XTypeProvider>*)aNumProv.getValue());
514 0 : aAggTypes = xNumProv->getTypes();
515 0 : }
516 : }
517 0 : long nAggLen = aAggTypes.getLength();
518 0 : const uno::Type* pAggPtr = aAggTypes.getConstArray();
519 :
520 0 : const long nThisLen = 16;
521 0 : aTypes.realloc( nParentLen + nAggLen + nThisLen );
522 0 : uno::Type* pPtr = aTypes.getArray();
523 0 : pPtr[nParentLen + 0] = getCppuType((const uno::Reference<sheet::XSpreadsheetDocument>*)0);
524 0 : pPtr[nParentLen + 1] = getCppuType((const uno::Reference<document::XActionLockable>*)0);
525 0 : pPtr[nParentLen + 2] = getCppuType((const uno::Reference<sheet::XCalculatable>*)0);
526 0 : pPtr[nParentLen + 3] = getCppuType((const uno::Reference<util::XProtectable>*)0);
527 0 : pPtr[nParentLen + 4] = getCppuType((const uno::Reference<drawing::XDrawPagesSupplier>*)0);
528 0 : pPtr[nParentLen + 5] = getCppuType((const uno::Reference<sheet::XGoalSeek>*)0);
529 0 : pPtr[nParentLen + 6] = getCppuType((const uno::Reference<sheet::XConsolidatable>*)0);
530 0 : pPtr[nParentLen + 7] = getCppuType((const uno::Reference<sheet::XDocumentAuditing>*)0);
531 0 : pPtr[nParentLen + 8] = getCppuType((const uno::Reference<style::XStyleFamiliesSupplier>*)0);
532 0 : pPtr[nParentLen + 9] = getCppuType((const uno::Reference<view::XRenderable>*)0);
533 0 : pPtr[nParentLen +10] = getCppuType((const uno::Reference<document::XLinkTargetSupplier>*)0);
534 0 : pPtr[nParentLen +11] = getCppuType((const uno::Reference<beans::XPropertySet>*)0);
535 0 : pPtr[nParentLen +12] = getCppuType((const uno::Reference<lang::XMultiServiceFactory>*)0);
536 0 : pPtr[nParentLen +13] = getCppuType((const uno::Reference<lang::XServiceInfo>*)0);
537 0 : pPtr[nParentLen +14] = getCppuType((const uno::Reference<util::XChangesNotifier>*)0);
538 0 : pPtr[nParentLen +15] = getCppuType((const uno::Reference<sheet::opencl::XOpenCLSelection>*)0);
539 :
540 : long i;
541 0 : for (i=0; i<nParentLen; i++)
542 0 : pPtr[i] = pParentPtr[i]; // parent types first
543 :
544 0 : for (i=0; i<nAggLen; i++)
545 0 : pPtr[nParentLen+nThisLen+i] = pAggPtr[i]; // aggregated types last
546 : }
547 0 : return aTypes;
548 : }
549 :
550 0 : uno::Sequence<sal_Int8> SAL_CALL ScModelObj::getImplementationId()
551 : throw(uno::RuntimeException, std::exception)
552 : {
553 0 : return css::uno::Sequence<sal_Int8>();
554 : }
555 :
556 0 : void ScModelObj::Notify( SfxBroadcaster& rBC, const SfxHint& rHint )
557 : {
558 : // Not interested in reference update hints here
559 :
560 0 : if ( rHint.ISA( SfxSimpleHint ) )
561 : {
562 0 : sal_uLong nId = ((const SfxSimpleHint&)rHint).GetId();
563 0 : if ( nId == SFX_HINT_DYING )
564 : {
565 0 : pDocShell = NULL; // has become invalid
566 0 : if (xNumberAgg.is())
567 : {
568 : SvNumberFormatsSupplierObj* pNumFmt =
569 : SvNumberFormatsSupplierObj::getImplementation(
570 0 : uno::Reference<util::XNumberFormatsSupplier>(xNumberAgg, uno::UNO_QUERY) );
571 0 : if ( pNumFmt )
572 0 : pNumFmt->SetNumberFormatter( NULL );
573 : }
574 :
575 0 : DELETEZ( pPrintFuncCache ); // must be deleted because it has a pointer to the DocShell
576 : }
577 0 : else if ( nId == SFX_HINT_DATACHANGED )
578 : {
579 : // cached data for rendering become invalid when contents change
580 : // (if a broadcast is added to SetDrawModified, is has to be tested here, too)
581 :
582 0 : DELETEZ( pPrintFuncCache );
583 :
584 : // handle "OnCalculate" sheet events (search also for VBA event handlers)
585 0 : if ( pDocShell )
586 : {
587 0 : ScDocument* pDoc = pDocShell->GetDocument();
588 0 : if ( pDoc->GetVbaEventProcessor().is() )
589 : {
590 : // If the VBA event processor is set, HasAnyCalcNotification is much faster than HasAnySheetEventScript
591 0 : if ( pDoc->HasAnyCalcNotification() && pDoc->HasAnySheetEventScript( SC_SHEETEVENT_CALCULATE, true ) )
592 0 : HandleCalculateEvents();
593 : }
594 : else
595 : {
596 0 : if ( pDoc->HasAnySheetEventScript( SC_SHEETEVENT_CALCULATE ) )
597 0 : HandleCalculateEvents();
598 : }
599 : }
600 : }
601 : }
602 0 : else if ( rHint.ISA( ScPointerChangedHint ) )
603 : {
604 0 : sal_uInt16 nFlags = ((const ScPointerChangedHint&)rHint).GetFlags();
605 0 : if (nFlags & SC_POINTERCHANGED_NUMFMT)
606 : {
607 : // NumberFormatter-Pointer am Uno-Objekt neu setzen
608 :
609 0 : if (GetFormatter().is())
610 : {
611 : SvNumberFormatsSupplierObj* pNumFmt =
612 : SvNumberFormatsSupplierObj::getImplementation(
613 0 : uno::Reference<util::XNumberFormatsSupplier>(xNumberAgg, uno::UNO_QUERY) );
614 0 : if ( pNumFmt && pDocShell )
615 0 : pNumFmt->SetNumberFormatter( pDocShell->GetDocument()->GetFormatTable() );
616 : }
617 : }
618 : }
619 :
620 : // always call parent - SfxBaseModel might need to handle the same hints again
621 0 : SfxBaseModel::Notify( rBC, rHint ); // SfxBaseModel is derived from SfxListener
622 0 : }
623 :
624 : // XSpreadsheetDocument
625 :
626 0 : uno::Reference<sheet::XSpreadsheets> SAL_CALL ScModelObj::getSheets() throw(uno::RuntimeException, std::exception)
627 : {
628 0 : SolarMutexGuard aGuard;
629 0 : if (pDocShell)
630 0 : return new ScTableSheetsObj(pDocShell);
631 0 : return NULL;
632 : }
633 :
634 : // XStyleFamiliesSupplier
635 :
636 0 : uno::Reference<container::XNameAccess> SAL_CALL ScModelObj::getStyleFamilies()
637 : throw(uno::RuntimeException, std::exception)
638 : {
639 0 : SolarMutexGuard aGuard;
640 0 : if (pDocShell)
641 0 : return new ScStyleFamiliesObj(pDocShell);
642 0 : return NULL;
643 : }
644 :
645 : // XRenderable
646 :
647 0 : static OutputDevice* lcl_GetRenderDevice( const uno::Sequence<beans::PropertyValue>& rOptions )
648 : {
649 0 : OutputDevice* pRet = NULL;
650 0 : const beans::PropertyValue* pPropArray = rOptions.getConstArray();
651 0 : long nPropCount = rOptions.getLength();
652 0 : for (long i = 0; i < nPropCount; i++)
653 : {
654 0 : const beans::PropertyValue& rProp = pPropArray[i];
655 0 : OUString aPropName(rProp.Name);
656 :
657 0 : if (aPropName.equalsAscii( SC_UNONAME_RENDERDEV ))
658 : {
659 0 : uno::Reference<awt::XDevice> xRenderDevice(rProp.Value, uno::UNO_QUERY);
660 0 : if ( xRenderDevice.is() )
661 : {
662 0 : VCLXDevice* pDevice = VCLXDevice::GetImplementation( xRenderDevice );
663 0 : if ( pDevice )
664 : {
665 0 : pRet = pDevice->GetOutputDevice();
666 0 : pRet->SetDigitLanguage( SC_MOD()->GetOptDigitLanguage() );
667 : }
668 0 : }
669 : }
670 0 : }
671 0 : return pRet;
672 : }
673 :
674 0 : static bool lcl_ParseTarget( const OUString& rTarget, ScRange& rTargetRange, Rectangle& rTargetRect,
675 : bool& rIsSheet, ScDocument* pDoc, SCTAB nSourceTab )
676 : {
677 : // test in same order as in SID_CURRENTCELL execute
678 :
679 0 : ScAddress aAddress;
680 0 : ScRangeUtil aRangeUtil;
681 : SCTAB nNameTab;
682 0 : sal_Int32 nNumeric = 0;
683 :
684 0 : bool bRangeValid = false;
685 0 : bool bRectValid = false;
686 :
687 0 : if ( rTargetRange.Parse( rTarget, pDoc ) & SCA_VALID )
688 : {
689 0 : bRangeValid = true; // range reference
690 : }
691 0 : else if ( aAddress.Parse( rTarget, pDoc ) & SCA_VALID )
692 : {
693 0 : rTargetRange = aAddress;
694 0 : bRangeValid = true; // cell reference
695 : }
696 0 : else if ( aRangeUtil.MakeRangeFromName( rTarget, pDoc, nSourceTab, rTargetRange, RUTL_NAMES ) ||
697 0 : aRangeUtil.MakeRangeFromName( rTarget, pDoc, nSourceTab, rTargetRange, RUTL_DBASE ) )
698 : {
699 0 : bRangeValid = true; // named range or database range
700 : }
701 0 : else if ( comphelper::string::isdigitAsciiString(rTarget) &&
702 0 : ( nNumeric = rTarget.toInt32() ) > 0 && nNumeric <= MAXROW+1 )
703 : {
704 : // row number is always mapped to cell A(row) on the same sheet
705 0 : rTargetRange = ScAddress( 0, (SCROW)(nNumeric-1), nSourceTab ); // target row number is 1-based
706 0 : bRangeValid = true; // row number
707 : }
708 0 : else if ( pDoc->GetTable( rTarget, nNameTab ) )
709 : {
710 0 : rTargetRange = ScAddress(0,0,nNameTab);
711 0 : bRangeValid = true; // sheet name
712 0 : rIsSheet = true; // needs special handling (first page of the sheet)
713 : }
714 : else
715 : {
716 : // look for named drawing object
717 :
718 0 : ScDrawLayer* pDrawLayer = pDoc->GetDrawLayer();
719 0 : if ( pDrawLayer )
720 : {
721 0 : SCTAB nTabCount = pDoc->GetTableCount();
722 0 : for (SCTAB i=0; i<nTabCount && !bRangeValid; i++)
723 : {
724 0 : SdrPage* pPage = pDrawLayer->GetPage(static_cast<sal_uInt16>(i));
725 : OSL_ENSURE(pPage,"Page ?");
726 0 : if (pPage)
727 : {
728 0 : SdrObjListIter aIter( *pPage, IM_DEEPWITHGROUPS );
729 0 : SdrObject* pObject = aIter.Next();
730 0 : while (pObject && !bRangeValid)
731 : {
732 0 : if ( ScDrawLayer::GetVisibleName( pObject ) == rTarget )
733 : {
734 0 : rTargetRect = pObject->GetLogicRect(); // 1/100th mm
735 0 : rTargetRange = pDoc->GetRange( i, rTargetRect ); // underlying cells
736 0 : bRangeValid = bRectValid = true; // rectangle is valid
737 : }
738 0 : pObject = aIter.Next();
739 0 : }
740 : }
741 : }
742 : }
743 : }
744 0 : if ( bRangeValid && !bRectValid )
745 : {
746 : // get rectangle for cell range
747 0 : rTargetRect = pDoc->GetMMRect( rTargetRange.aStart.Col(), rTargetRange.aStart.Row(),
748 0 : rTargetRange.aEnd.Col(), rTargetRange.aEnd.Row(),
749 0 : rTargetRange.aStart.Tab() );
750 : }
751 :
752 0 : return bRangeValid;
753 : }
754 :
755 0 : bool ScModelObj::FillRenderMarkData( const uno::Any& aSelection,
756 : const uno::Sequence< beans::PropertyValue >& rOptions,
757 : ScMarkData& rMark,
758 : ScPrintSelectionStatus& rStatus, OUString& rPagesStr ) const
759 : {
760 : OSL_ENSURE( !rMark.IsMarked() && !rMark.IsMultiMarked(), "FillRenderMarkData: MarkData must be empty" );
761 : OSL_ENSURE( pDocShell, "FillRenderMarkData: DocShell must be set" );
762 :
763 0 : bool bDone = false;
764 :
765 0 : uno::Reference<frame::XController> xView;
766 :
767 : // defaults when no options are passed: all sheets, include empty pages
768 0 : sal_Bool bSelectedSheetsOnly = false;
769 0 : sal_Bool bIncludeEmptyPages = true;
770 :
771 0 : bool bHasPrintContent = false;
772 0 : sal_Int32 nPrintContent = 0; // all sheets / selected sheets / selected cells
773 0 : sal_Int32 nPrintRange = 0; // all pages / pages
774 0 : OUString aPageRange; // "pages" edit value
775 :
776 0 : for( sal_Int32 i = 0, nLen = rOptions.getLength(); i < nLen; i++ )
777 : {
778 0 : if ( rOptions[i].Name == "IsOnlySelectedSheets" )
779 : {
780 0 : rOptions[i].Value >>= bSelectedSheetsOnly;
781 : }
782 0 : else if ( rOptions[i].Name == "IsIncludeEmptyPages" )
783 : {
784 0 : rOptions[i].Value >>= bIncludeEmptyPages;
785 : }
786 0 : else if ( rOptions[i].Name == "PageRange" )
787 : {
788 0 : rOptions[i].Value >>= aPageRange;
789 : }
790 0 : else if ( rOptions[i].Name == "PrintRange" )
791 : {
792 0 : rOptions[i].Value >>= nPrintRange;
793 : }
794 0 : else if ( rOptions[i].Name == "PrintContent" )
795 : {
796 0 : bHasPrintContent = true;
797 0 : rOptions[i].Value >>= nPrintContent;
798 : }
799 0 : else if ( rOptions[i].Name == "View" )
800 : {
801 0 : rOptions[i].Value >>= xView;
802 : }
803 : }
804 :
805 : // "Print Content" selection wins over "Selected Sheets" option
806 0 : if ( bHasPrintContent )
807 0 : bSelectedSheetsOnly = ( nPrintContent != 0 );
808 :
809 0 : uno::Reference<uno::XInterface> xInterface(aSelection, uno::UNO_QUERY);
810 0 : if ( xInterface.is() )
811 : {
812 0 : ScCellRangesBase* pSelObj = ScCellRangesBase::getImplementation( xInterface );
813 0 : uno::Reference< drawing::XShapes > xShapes( xInterface, uno::UNO_QUERY );
814 0 : if ( pSelObj && pSelObj->GetDocShell() == pDocShell )
815 : {
816 0 : bool bSheet = ( ScTableSheetObj::getImplementation( xInterface ) != NULL );
817 0 : bool bCursor = pSelObj->IsCursorOnly();
818 0 : const ScRangeList& rRanges = pSelObj->GetRangeList();
819 :
820 0 : rMark.MarkFromRangeList( rRanges, false );
821 0 : rMark.MarkToSimple();
822 :
823 0 : if ( rMark.IsMultiMarked() )
824 : {
825 : // #i115266# copy behavior of old printing:
826 : // treat multiple selection like a single selection with the enclosing range
827 0 : ScRange aMultiMarkArea;
828 0 : rMark.GetMultiMarkArea( aMultiMarkArea );
829 0 : rMark.ResetMark();
830 0 : rMark.SetMarkArea( aMultiMarkArea );
831 : }
832 :
833 0 : if ( rMark.IsMarked() && !rMark.IsMultiMarked() )
834 : {
835 : // a sheet object is treated like an empty selection: print the used area of the sheet
836 :
837 0 : if ( bCursor || bSheet ) // nothing selected -> use whole tables
838 : {
839 0 : rMark.ResetMark(); // doesn't change table selection
840 0 : rStatus.SetMode( SC_PRINTSEL_CURSOR );
841 : }
842 : else
843 0 : rStatus.SetMode( SC_PRINTSEL_RANGE );
844 :
845 0 : rStatus.SetRanges( rRanges );
846 0 : bDone = true;
847 : }
848 : // multi selection isn't supported
849 : }
850 0 : else if( xShapes.is() )
851 : {
852 : //print a selected ole object
853 0 : uno::Reference< container::XIndexAccess > xIndexAccess( xShapes, uno::UNO_QUERY );
854 0 : if( xIndexAccess.is() )
855 : {
856 : // multi selection isn't supported yet
857 0 : uno::Reference< drawing::XShape > xShape( xIndexAccess->getByIndex(0), uno::UNO_QUERY );
858 0 : SvxShape* pShape = SvxShape::getImplementation( xShape );
859 0 : if( pShape )
860 : {
861 0 : SdrObject *pSdrObj = pShape->GetSdrObject();
862 0 : if( pDocShell )
863 : {
864 0 : ScDocument* pDoc = pDocShell->GetDocument();
865 0 : if( pDoc && pSdrObj )
866 : {
867 0 : Rectangle aObjRect = pSdrObj->GetCurrentBoundRect();
868 0 : SCTAB nCurrentTab = ScDocShell::GetCurTab();
869 0 : ScRange aRange = pDoc->GetRange( nCurrentTab, aObjRect );
870 0 : rMark.SetMarkArea( aRange );
871 :
872 0 : if( rMark.IsMarked() && !rMark.IsMultiMarked() )
873 : {
874 0 : rStatus.SetMode( SC_PRINTSEL_RANGE_EXCLUSIVELY_OLE_AND_DRAW_OBJECTS );
875 0 : bDone = true;
876 : }
877 : }
878 : }
879 0 : }
880 0 : }
881 : }
882 0 : else if ( ScModelObj::getImplementation( xInterface ) == this )
883 : {
884 : // render the whole document
885 : // -> no selection, all sheets
886 :
887 0 : SCTAB nTabCount = pDocShell->GetDocument()->GetTableCount();
888 0 : for (SCTAB nTab = 0; nTab < nTabCount; nTab++)
889 0 : rMark.SelectTable( nTab, true );
890 0 : rStatus.SetMode( SC_PRINTSEL_DOCUMENT );
891 0 : bDone = true;
892 0 : }
893 : // other selection types aren't supported
894 : }
895 :
896 : // restrict to selected sheets if a view is available
897 0 : uno::Reference<sheet::XSelectedSheetsSupplier> xSelectedSheets(xView, uno::UNO_QUERY);
898 0 : if (bSelectedSheetsOnly && xSelectedSheets.is())
899 : {
900 0 : uno::Sequence<sal_Int32> aSelected = xSelectedSheets->getSelectedSheets();
901 0 : ScMarkData::MarkedTabsType aSelectedTabs;
902 0 : SCTAB nMaxTab = pDocShell->GetDocument()->GetTableCount() -1;
903 0 : for (sal_Int32 i = 0, n = aSelected.getLength(); i < n; ++i)
904 : {
905 0 : SCTAB nSelected = static_cast<SCTAB>(aSelected[i]);
906 0 : if (ValidTab(nSelected, nMaxTab))
907 0 : aSelectedTabs.insert(static_cast<SCTAB>(aSelected[i]));
908 : }
909 0 : rMark.SetSelectedTabs(aSelectedTabs);
910 : }
911 :
912 0 : ScPrintOptions aNewOptions;
913 0 : aNewOptions.SetSkipEmpty( !bIncludeEmptyPages );
914 0 : aNewOptions.SetAllSheets( !bSelectedSheetsOnly );
915 0 : rStatus.SetOptions( aNewOptions );
916 :
917 : // "PrintRange" enables (1) or disables (0) the "PageRange" edit
918 0 : if ( nPrintRange == 1 )
919 0 : rPagesStr = aPageRange;
920 : else
921 0 : rPagesStr = "";
922 :
923 0 : return bDone;
924 : }
925 :
926 :
927 0 : sal_Int32 SAL_CALL ScModelObj::getRendererCount(const uno::Any& aSelection,
928 : const uno::Sequence<beans::PropertyValue>& rOptions)
929 : throw (lang::IllegalArgumentException, uno::RuntimeException, std::exception)
930 : {
931 0 : SolarMutexGuard aGuard;
932 0 : if (!pDocShell)
933 : {
934 : throw lang::DisposedException( OUString(),
935 0 : static_cast< sheet::XSpreadsheetDocument* >(this) );
936 : }
937 :
938 0 : ScMarkData aMark;
939 0 : ScPrintSelectionStatus aStatus;
940 0 : OUString aPagesStr;
941 0 : if ( !FillRenderMarkData( aSelection, rOptions, aMark, aStatus, aPagesStr ) )
942 0 : return 0;
943 :
944 : // The same ScPrintFuncCache object in pPrintFuncCache is used as long as
945 : // the same selection is used (aStatus) and the document isn't changed
946 : // (pPrintFuncCache is cleared in Notify handler)
947 :
948 0 : if ( !pPrintFuncCache || !pPrintFuncCache->IsSameSelection( aStatus ) )
949 : {
950 0 : delete pPrintFuncCache;
951 0 : pPrintFuncCache = new ScPrintFuncCache( pDocShell, aMark, aStatus );
952 : }
953 0 : sal_Int32 nPages = pPrintFuncCache->GetPageCount();
954 :
955 0 : sal_Int32 nSelectCount = nPages;
956 0 : if ( !aPagesStr.isEmpty() )
957 : {
958 0 : StringRangeEnumerator aRangeEnum( aPagesStr, 0, nPages-1 );
959 0 : nSelectCount = aRangeEnum.size();
960 : }
961 0 : return nSelectCount;
962 : }
963 :
964 0 : static sal_Int32 lcl_GetRendererNum( sal_Int32 nSelRenderer, const OUString& rPagesStr, sal_Int32 nTotalPages )
965 : {
966 0 : if ( rPagesStr.isEmpty() )
967 0 : return nSelRenderer;
968 :
969 0 : StringRangeEnumerator aRangeEnum( rPagesStr, 0, nTotalPages-1 );
970 0 : StringRangeEnumerator::Iterator aIter = aRangeEnum.begin();
971 0 : StringRangeEnumerator::Iterator aEnd = aRangeEnum.end();
972 0 : for ( ; nSelRenderer > 0 && aIter != aEnd; --nSelRenderer )
973 0 : ++aIter;
974 :
975 0 : return *aIter; // returns -1 if reached the end
976 : }
977 :
978 0 : uno::Sequence<beans::PropertyValue> SAL_CALL ScModelObj::getRenderer( sal_Int32 nSelRenderer,
979 : const uno::Any& aSelection, const uno::Sequence<beans::PropertyValue>& rOptions )
980 : throw (lang::IllegalArgumentException,
981 : uno::RuntimeException,
982 : std::exception)
983 : {
984 0 : SolarMutexGuard aGuard;
985 0 : if (!pDocShell)
986 : {
987 : throw lang::DisposedException( OUString(),
988 0 : static_cast< sheet::XSpreadsheetDocument* >(this) );
989 : }
990 :
991 0 : ScMarkData aMark;
992 0 : ScPrintSelectionStatus aStatus;
993 0 : OUString aPagesStr;
994 : // #i115266# if FillRenderMarkData fails, keep nTotalPages at 0, but still handle getRenderer(0) below
995 0 : long nTotalPages = 0;
996 0 : if ( FillRenderMarkData( aSelection, rOptions, aMark, aStatus, aPagesStr ) )
997 : {
998 0 : if ( !pPrintFuncCache || !pPrintFuncCache->IsSameSelection( aStatus ) )
999 : {
1000 0 : delete pPrintFuncCache;
1001 0 : pPrintFuncCache = new ScPrintFuncCache( pDocShell, aMark, aStatus );
1002 : }
1003 0 : nTotalPages = pPrintFuncCache->GetPageCount();
1004 : }
1005 0 : sal_Int32 nRenderer = lcl_GetRendererNum( nSelRenderer, aPagesStr, nTotalPages );
1006 0 : if ( nRenderer < 0 )
1007 : {
1008 0 : if ( nSelRenderer == 0 )
1009 : {
1010 : // getRenderer(0) is used to query the settings, so it must always return something
1011 :
1012 0 : SCTAB nCurTab = 0; //! use current sheet from view?
1013 0 : ScPrintFunc aDefaultFunc( pDocShell, pDocShell->GetPrinter(), nCurTab );
1014 0 : Size aTwips = aDefaultFunc.GetPageSize();
1015 0 : awt::Size aPageSize( TwipsToHMM( aTwips.Width() ), TwipsToHMM( aTwips.Height() ) );
1016 :
1017 0 : uno::Sequence<beans::PropertyValue> aSequence(1);
1018 0 : beans::PropertyValue* pArray = aSequence.getArray();
1019 0 : pArray[0].Name = SC_UNONAME_PAGESIZE;
1020 0 : pArray[0].Value <<= aPageSize;
1021 :
1022 0 : if( ! pPrinterOptions )
1023 0 : pPrinterOptions = new ScPrintUIOptions;
1024 : else
1025 0 : pPrinterOptions->SetDefaults();
1026 0 : pPrinterOptions->appendPrintUIOptions( aSequence );
1027 0 : return aSequence;
1028 : }
1029 : else
1030 0 : throw lang::IllegalArgumentException();
1031 : }
1032 :
1033 : // printer is used as device (just for page layout), draw view is not needed
1034 :
1035 0 : SCTAB nTab = pPrintFuncCache->GetTabForPage( nRenderer );
1036 :
1037 0 : ScRange aRange;
1038 0 : const ScRange* pSelRange = NULL;
1039 0 : if ( aMark.IsMarked() )
1040 : {
1041 0 : aMark.GetMarkArea( aRange );
1042 0 : pSelRange = &aRange;
1043 : }
1044 : ScPrintFunc aFunc( pDocShell, pDocShell->GetPrinter(), nTab,
1045 0 : pPrintFuncCache->GetFirstAttr(nTab), nTotalPages, pSelRange, &aStatus.GetOptions() );
1046 0 : aFunc.SetRenderFlag( true );
1047 :
1048 0 : Range aPageRange( nRenderer+1, nRenderer+1 );
1049 0 : MultiSelection aPage( aPageRange );
1050 0 : aPage.SetTotalRange( Range(0,RANGE_MAX) );
1051 0 : aPage.Select( aPageRange );
1052 :
1053 0 : long nDisplayStart = pPrintFuncCache->GetDisplayStart( nTab );
1054 0 : long nTabStart = pPrintFuncCache->GetTabStart( nTab );
1055 :
1056 0 : (void)aFunc.DoPrint( aPage, nTabStart, nDisplayStart, false, NULL );
1057 :
1058 0 : ScRange aCellRange;
1059 0 : sal_Bool bWasCellRange = aFunc.GetLastSourceRange( aCellRange );
1060 0 : Size aTwips = aFunc.GetPageSize();
1061 0 : awt::Size aPageSize( TwipsToHMM( aTwips.Width() ), TwipsToHMM( aTwips.Height() ) );
1062 :
1063 0 : long nPropCount = bWasCellRange ? 3 : 2;
1064 0 : uno::Sequence<beans::PropertyValue> aSequence(nPropCount);
1065 0 : beans::PropertyValue* pArray = aSequence.getArray();
1066 0 : pArray[0].Name = SC_UNONAME_PAGESIZE;
1067 0 : pArray[0].Value <<= aPageSize;
1068 : // #i111158# all positions are relative to the whole page, including non-printable area
1069 0 : pArray[1].Name = SC_UNONAME_INC_NP_AREA;
1070 0 : pArray[1].Value = uno::makeAny( sal_True );
1071 0 : if ( bWasCellRange )
1072 : {
1073 : table::CellRangeAddress aRangeAddress( nTab,
1074 0 : aCellRange.aStart.Col(), aCellRange.aStart.Row(),
1075 0 : aCellRange.aEnd.Col(), aCellRange.aEnd.Row() );
1076 0 : pArray[2].Name = SC_UNONAME_SOURCERANGE;
1077 0 : pArray[2].Value <<= aRangeAddress;
1078 : }
1079 :
1080 0 : if( ! pPrinterOptions )
1081 0 : pPrinterOptions = new ScPrintUIOptions;
1082 : else
1083 0 : pPrinterOptions->SetDefaults();
1084 0 : pPrinterOptions->appendPrintUIOptions( aSequence );
1085 0 : return aSequence;
1086 : }
1087 :
1088 0 : void SAL_CALL ScModelObj::render( sal_Int32 nSelRenderer, const uno::Any& aSelection,
1089 : const uno::Sequence<beans::PropertyValue>& rOptions )
1090 : throw(lang::IllegalArgumentException,
1091 : uno::RuntimeException,
1092 : std::exception)
1093 : {
1094 0 : SolarMutexGuard aGuard;
1095 0 : if (!pDocShell)
1096 : {
1097 : throw lang::DisposedException( OUString(),
1098 0 : static_cast< sheet::XSpreadsheetDocument* >(this) );
1099 : }
1100 :
1101 0 : ScMarkData aMark;
1102 0 : ScPrintSelectionStatus aStatus;
1103 0 : OUString aPagesStr;
1104 0 : if ( !FillRenderMarkData( aSelection, rOptions, aMark, aStatus, aPagesStr ) )
1105 0 : throw lang::IllegalArgumentException();
1106 :
1107 0 : if ( !pPrintFuncCache || !pPrintFuncCache->IsSameSelection( aStatus ) )
1108 : {
1109 0 : delete pPrintFuncCache;
1110 0 : pPrintFuncCache = new ScPrintFuncCache( pDocShell, aMark, aStatus );
1111 : }
1112 0 : long nTotalPages = pPrintFuncCache->GetPageCount();
1113 0 : sal_Int32 nRenderer = lcl_GetRendererNum( nSelRenderer, aPagesStr, nTotalPages );
1114 0 : if ( nRenderer < 0 )
1115 0 : throw lang::IllegalArgumentException();
1116 :
1117 0 : OutputDevice* pDev = lcl_GetRenderDevice( rOptions );
1118 0 : if ( !pDev )
1119 0 : throw lang::IllegalArgumentException();
1120 :
1121 0 : SCTAB nTab = pPrintFuncCache->GetTabForPage( nRenderer );
1122 0 : ScDocument* pDoc = pDocShell->GetDocument();
1123 :
1124 0 : FmFormView* pDrawView = NULL;
1125 :
1126 : // #114135#
1127 0 : ScDrawLayer* pModel = pDoc->GetDrawLayer();
1128 :
1129 0 : if( pModel )
1130 : {
1131 0 : pDrawView = new FmFormView( pModel, pDev );
1132 0 : pDrawView->ShowSdrPage(pDrawView->GetModel()->GetPage(nTab));
1133 0 : pDrawView->SetPrintPreview( true );
1134 : }
1135 :
1136 0 : ScRange aRange;
1137 0 : const ScRange* pSelRange = NULL;
1138 0 : if ( aMark.IsMarked() )
1139 : {
1140 0 : aMark.GetMarkArea( aRange );
1141 0 : pSelRange = &aRange;
1142 : }
1143 :
1144 : // to increase performance, ScPrintState might be used here for subsequent
1145 : // pages of the same sheet
1146 :
1147 0 : ScPrintFunc aFunc( pDev, pDocShell, nTab, pPrintFuncCache->GetFirstAttr(nTab), nTotalPages, pSelRange, &aStatus.GetOptions() );
1148 0 : aFunc.SetDrawView( pDrawView );
1149 0 : aFunc.SetRenderFlag( true );
1150 0 : if( aStatus.GetMode() == SC_PRINTSEL_RANGE_EXCLUSIVELY_OLE_AND_DRAW_OBJECTS )
1151 0 : aFunc.SetExclusivelyDrawOleAndDrawObjects();
1152 :
1153 0 : Range aPageRange( nRenderer+1, nRenderer+1 );
1154 0 : MultiSelection aPage( aPageRange );
1155 0 : aPage.SetTotalRange( Range(0,RANGE_MAX) );
1156 0 : aPage.Select( aPageRange );
1157 :
1158 0 : long nDisplayStart = pPrintFuncCache->GetDisplayStart( nTab );
1159 0 : long nTabStart = pPrintFuncCache->GetTabStart( nTab );
1160 :
1161 0 : vcl::PDFExtOutDevData* pPDFData = PTR_CAST( vcl::PDFExtOutDevData, pDev->GetExtOutDevData() );
1162 0 : if ( nRenderer == nTabStart )
1163 : {
1164 : // first page of a sheet: add outline item for the sheet name
1165 :
1166 0 : if ( pPDFData && pPDFData->GetIsExportBookmarks() )
1167 : {
1168 : // the sheet starts at the top of the page
1169 0 : Rectangle aArea( pDev->PixelToLogic( Rectangle( 0,0,0,0 ) ) );
1170 0 : sal_Int32 nDestID = pPDFData->CreateDest( aArea );
1171 0 : OUString aTabName;
1172 0 : pDoc->GetName( nTab, aTabName );
1173 0 : sal_Int32 nParent = -1; // top-level
1174 0 : pPDFData->CreateOutlineItem( nParent, aTabName, nDestID );
1175 : }
1176 : // #i56629# add the named destination stuff
1177 0 : if( pPDFData && pPDFData->GetIsExportNamedDestinations() )
1178 : {
1179 0 : Rectangle aArea( pDev->PixelToLogic( Rectangle( 0,0,0,0 ) ) );
1180 0 : OUString aTabName;
1181 0 : pDoc->GetName( nTab, aTabName );
1182 : //need the PDF page number here
1183 0 : pPDFData->CreateNamedDest( aTabName, aArea );
1184 : }
1185 : }
1186 :
1187 0 : (void)aFunc.DoPrint( aPage, nTabStart, nDisplayStart, true, NULL );
1188 :
1189 : // resolve the hyperlinks for PDF export
1190 :
1191 0 : if ( pPDFData )
1192 : {
1193 : // iterate over the hyperlinks that were output for this page
1194 :
1195 0 : std::vector< vcl::PDFExtOutDevBookmarkEntry >& rBookmarks = pPDFData->GetBookmarks();
1196 0 : std::vector< vcl::PDFExtOutDevBookmarkEntry >::iterator aIter = rBookmarks.begin();
1197 0 : std::vector< vcl::PDFExtOutDevBookmarkEntry >::iterator aIEnd = rBookmarks.end();
1198 0 : while ( aIter != aIEnd )
1199 : {
1200 0 : OUString aBookmark = aIter->aBookmark;
1201 0 : if ( aBookmark.toChar() == (sal_Unicode) '#' )
1202 : {
1203 : // try to resolve internal link
1204 :
1205 0 : OUString aTarget( aBookmark.copy( 1 ) );
1206 :
1207 0 : ScRange aTargetRange;
1208 0 : Rectangle aTargetRect; // 1/100th mm
1209 0 : bool bIsSheet = false;
1210 0 : bool bValid = lcl_ParseTarget( aTarget, aTargetRange, aTargetRect, bIsSheet, pDoc, nTab );
1211 :
1212 0 : if ( bValid )
1213 : {
1214 0 : sal_Int32 nPage = -1;
1215 0 : Rectangle aArea;
1216 0 : if ( bIsSheet )
1217 : {
1218 : // Get first page for sheet (if nothing from that sheet is printed,
1219 : // this page can show a different sheet)
1220 0 : nPage = pPrintFuncCache->GetTabStart( aTargetRange.aStart.Tab() );
1221 0 : aArea = pDev->PixelToLogic( Rectangle( 0,0,0,0 ) );
1222 : }
1223 : else
1224 : {
1225 0 : pPrintFuncCache->InitLocations( aMark, pDev ); // does nothing if already initialized
1226 :
1227 0 : ScPrintPageLocation aLocation;
1228 0 : if ( pPrintFuncCache->FindLocation( aTargetRange.aStart, aLocation ) )
1229 : {
1230 0 : nPage = aLocation.nPage;
1231 :
1232 : // get the rectangle of the page's cell range in 1/100th mm
1233 0 : ScRange aLocRange = aLocation.aCellRange;
1234 : Rectangle aLocationMM = pDoc->GetMMRect(
1235 0 : aLocRange.aStart.Col(), aLocRange.aStart.Row(),
1236 0 : aLocRange.aEnd.Col(), aLocRange.aEnd.Row(),
1237 0 : aLocRange.aStart.Tab() );
1238 0 : Rectangle aLocationPixel = aLocation.aRectangle;
1239 :
1240 : // Scale and move the target rectangle from aLocationMM to aLocationPixel,
1241 : // to get the target rectangle in pixels.
1242 :
1243 0 : Fraction aScaleX( aLocationPixel.GetWidth(), aLocationMM.GetWidth() );
1244 0 : Fraction aScaleY( aLocationPixel.GetHeight(), aLocationMM.GetHeight() );
1245 :
1246 0 : long nX1 = aLocationPixel.Left() + (long)
1247 0 : ( Fraction( aTargetRect.Left() - aLocationMM.Left(), 1 ) * aScaleX );
1248 0 : long nX2 = aLocationPixel.Left() + (long)
1249 0 : ( Fraction( aTargetRect.Right() - aLocationMM.Left(), 1 ) * aScaleX );
1250 0 : long nY1 = aLocationPixel.Top() + (long)
1251 0 : ( Fraction( aTargetRect.Top() - aLocationMM.Top(), 1 ) * aScaleY );
1252 0 : long nY2 = aLocationPixel.Top() + (long)
1253 0 : ( Fraction( aTargetRect.Bottom() - aLocationMM.Top(), 1 ) * aScaleY );
1254 :
1255 0 : if ( nX1 > aLocationPixel.Right() ) nX1 = aLocationPixel.Right();
1256 0 : if ( nX2 > aLocationPixel.Right() ) nX2 = aLocationPixel.Right();
1257 0 : if ( nY1 > aLocationPixel.Bottom() ) nY1 = aLocationPixel.Bottom();
1258 0 : if ( nY2 > aLocationPixel.Bottom() ) nY2 = aLocationPixel.Bottom();
1259 :
1260 : // The link target area is interpreted using the device's MapMode at
1261 : // the time of the CreateDest call, so PixelToLogic can be used here,
1262 : // regardless of the MapMode that is actually selected.
1263 :
1264 0 : aArea = pDev->PixelToLogic( Rectangle( nX1, nY1, nX2, nY2 ) );
1265 : }
1266 : }
1267 :
1268 0 : if ( nPage >= 0 )
1269 0 : pPDFData->SetLinkDest( aIter->nLinkId, pPDFData->CreateDest( aArea, nPage ) );
1270 0 : }
1271 : }
1272 : else
1273 : {
1274 : // external link, use as-is
1275 0 : pPDFData->SetLinkURL( aIter->nLinkId, aBookmark );
1276 : }
1277 0 : ++aIter;
1278 0 : }
1279 0 : rBookmarks.clear();
1280 : }
1281 :
1282 0 : if ( pDrawView )
1283 0 : pDrawView->HideSdrPage();
1284 0 : delete pDrawView;
1285 0 : }
1286 :
1287 : // XLinkTargetSupplier
1288 :
1289 0 : uno::Reference<container::XNameAccess> SAL_CALL ScModelObj::getLinks() throw(uno::RuntimeException, std::exception)
1290 : {
1291 0 : SolarMutexGuard aGuard;
1292 0 : if (pDocShell)
1293 0 : return new ScLinkTargetTypesObj(pDocShell);
1294 0 : return NULL;
1295 : }
1296 :
1297 : // XActionLockable
1298 :
1299 0 : sal_Bool SAL_CALL ScModelObj::isActionLocked() throw(uno::RuntimeException, std::exception)
1300 : {
1301 0 : SolarMutexGuard aGuard;
1302 0 : sal_Bool bLocked = false;
1303 0 : if (pDocShell)
1304 0 : bLocked = ( pDocShell->GetLockCount() != 0 );
1305 0 : return bLocked;
1306 : }
1307 :
1308 0 : void SAL_CALL ScModelObj::addActionLock() throw(uno::RuntimeException, std::exception)
1309 : {
1310 0 : SolarMutexGuard aGuard;
1311 0 : if (pDocShell)
1312 0 : pDocShell->LockDocument();
1313 0 : }
1314 :
1315 0 : void SAL_CALL ScModelObj::removeActionLock() throw(uno::RuntimeException, std::exception)
1316 : {
1317 0 : SolarMutexGuard aGuard;
1318 0 : if (pDocShell)
1319 0 : pDocShell->UnlockDocument();
1320 0 : }
1321 :
1322 0 : void SAL_CALL ScModelObj::setActionLocks( sal_Int16 nLock ) throw(uno::RuntimeException, std::exception)
1323 : {
1324 0 : SolarMutexGuard aGuard;
1325 0 : if (pDocShell)
1326 0 : pDocShell->SetLockCount(nLock);
1327 0 : }
1328 :
1329 0 : sal_Int16 SAL_CALL ScModelObj::resetActionLocks() throw(uno::RuntimeException, std::exception)
1330 : {
1331 0 : SolarMutexGuard aGuard;
1332 0 : sal_uInt16 nRet = 0;
1333 0 : if (pDocShell)
1334 : {
1335 0 : nRet = pDocShell->GetLockCount();
1336 0 : pDocShell->SetLockCount(0);
1337 : }
1338 0 : return nRet;
1339 : }
1340 :
1341 0 : void SAL_CALL ScModelObj::lockControllers() throw (::com::sun::star::uno::RuntimeException, std::exception)
1342 : {
1343 0 : SolarMutexGuard aGuard;
1344 0 : SfxBaseModel::lockControllers();
1345 0 : if (pDocShell)
1346 0 : pDocShell->LockPaint();
1347 0 : }
1348 :
1349 0 : void SAL_CALL ScModelObj::unlockControllers() throw (::com::sun::star::uno::RuntimeException, std::exception)
1350 : {
1351 0 : SolarMutexGuard aGuard;
1352 0 : if (hasControllersLocked())
1353 : {
1354 0 : SfxBaseModel::unlockControllers();
1355 0 : if (pDocShell)
1356 0 : pDocShell->UnlockPaint();
1357 0 : }
1358 0 : }
1359 :
1360 : // XCalculate
1361 :
1362 0 : void SAL_CALL ScModelObj::calculate() throw(uno::RuntimeException, std::exception)
1363 : {
1364 0 : SolarMutexGuard aGuard;
1365 0 : if (pDocShell)
1366 0 : pDocShell->DoRecalc(true);
1367 : else
1368 : {
1369 : OSL_FAIL("keine DocShell"); //! Exception oder so?
1370 0 : }
1371 0 : }
1372 :
1373 0 : void SAL_CALL ScModelObj::calculateAll() throw(uno::RuntimeException, std::exception)
1374 : {
1375 0 : SolarMutexGuard aGuard;
1376 0 : if (pDocShell)
1377 0 : pDocShell->DoHardRecalc(true);
1378 : else
1379 : {
1380 : OSL_FAIL("keine DocShell"); //! Exception oder so?
1381 0 : }
1382 0 : }
1383 :
1384 0 : sal_Bool SAL_CALL ScModelObj::isAutomaticCalculationEnabled() throw(uno::RuntimeException, std::exception)
1385 : {
1386 0 : SolarMutexGuard aGuard;
1387 0 : if (pDocShell)
1388 0 : return pDocShell->GetDocument()->GetAutoCalc();
1389 :
1390 : OSL_FAIL("keine DocShell"); //! Exception oder so?
1391 0 : return false;
1392 : }
1393 :
1394 0 : void SAL_CALL ScModelObj::enableAutomaticCalculation( sal_Bool bEnabledIn )
1395 : throw(uno::RuntimeException, std::exception)
1396 : {
1397 0 : bool bEnabled(bEnabledIn);
1398 0 : SolarMutexGuard aGuard;
1399 0 : if (pDocShell)
1400 : {
1401 0 : ScDocument* pDoc = pDocShell->GetDocument();
1402 0 : if ( pDoc->GetAutoCalc() != bEnabled )
1403 : {
1404 0 : pDoc->SetAutoCalc( bEnabled );
1405 0 : pDocShell->SetDocumentModified();
1406 : }
1407 : }
1408 : else
1409 : {
1410 : OSL_FAIL("keine DocShell"); //! Exception oder so?
1411 0 : }
1412 0 : }
1413 :
1414 : // XProtectable
1415 :
1416 0 : void SAL_CALL ScModelObj::protect( const OUString& aPassword ) throw(uno::RuntimeException, std::exception)
1417 : {
1418 0 : SolarMutexGuard aGuard;
1419 : // #i108245# if already protected, don't change anything
1420 0 : if ( pDocShell && !pDocShell->GetDocument()->IsDocProtected() )
1421 : {
1422 0 : OUString aString(aPassword);
1423 0 : pDocShell->GetDocFunc().Protect( TABLEID_DOC, aString, true );
1424 0 : }
1425 0 : }
1426 :
1427 0 : void SAL_CALL ScModelObj::unprotect( const OUString& aPassword )
1428 : throw(lang::IllegalArgumentException, uno::RuntimeException, std::exception)
1429 : {
1430 0 : SolarMutexGuard aGuard;
1431 0 : if (pDocShell)
1432 : {
1433 0 : OUString aString(aPassword);
1434 0 : sal_Bool bDone = pDocShell->GetDocFunc().Unprotect( TABLEID_DOC, aString, true );
1435 0 : if (!bDone)
1436 0 : throw lang::IllegalArgumentException();
1437 0 : }
1438 0 : }
1439 :
1440 0 : sal_Bool SAL_CALL ScModelObj::isProtected() throw(uno::RuntimeException, std::exception)
1441 : {
1442 0 : SolarMutexGuard aGuard;
1443 0 : if (pDocShell)
1444 0 : return pDocShell->GetDocument()->IsDocProtected();
1445 :
1446 : OSL_FAIL("keine DocShell"); //! Exception oder so?
1447 0 : return false;
1448 : }
1449 :
1450 : // XDrawPagesSupplier
1451 :
1452 0 : uno::Reference<drawing::XDrawPages> SAL_CALL ScModelObj::getDrawPages() throw(uno::RuntimeException, std::exception)
1453 : {
1454 0 : SolarMutexGuard aGuard;
1455 0 : if (pDocShell)
1456 0 : return new ScDrawPagesObj(pDocShell);
1457 :
1458 : OSL_FAIL("keine DocShell"); //! Exception oder so?
1459 0 : return NULL;
1460 : }
1461 :
1462 : // XGoalSeek
1463 :
1464 0 : sheet::GoalResult SAL_CALL ScModelObj::seekGoal(
1465 : const table::CellAddress& aFormulaPosition,
1466 : const table::CellAddress& aVariablePosition,
1467 : const OUString& aGoalValue )
1468 : throw (uno::RuntimeException,
1469 : std::exception)
1470 : {
1471 0 : SolarMutexGuard aGuard;
1472 0 : sheet::GoalResult aResult;
1473 0 : aResult.Divergence = DBL_MAX; // nichts gefunden
1474 0 : if (pDocShell)
1475 : {
1476 0 : WaitObject aWait( pDocShell->GetActiveDialogParent() );
1477 0 : OUString aGoalString(aGoalValue);
1478 0 : ScDocument* pDoc = pDocShell->GetDocument();
1479 0 : double fValue = 0.0;
1480 : sal_Bool bFound = pDoc->Solver(
1481 : (SCCOL)aFormulaPosition.Column, (SCROW)aFormulaPosition.Row, aFormulaPosition.Sheet,
1482 : (SCCOL)aVariablePosition.Column, (SCROW)aVariablePosition.Row, aVariablePosition.Sheet,
1483 0 : aGoalString, fValue );
1484 0 : aResult.Result = fValue;
1485 0 : if (bFound)
1486 0 : aResult.Divergence = 0.0; //! das ist gelogen
1487 : }
1488 0 : return aResult;
1489 : }
1490 :
1491 : // XConsolidatable
1492 :
1493 0 : uno::Reference<sheet::XConsolidationDescriptor> SAL_CALL ScModelObj::createConsolidationDescriptor(
1494 : sal_Bool bEmpty ) throw(uno::RuntimeException, std::exception)
1495 : {
1496 0 : SolarMutexGuard aGuard;
1497 0 : ScConsolidationDescriptor* pNew = new ScConsolidationDescriptor;
1498 0 : if ( pDocShell && !bEmpty )
1499 : {
1500 0 : ScDocument* pDoc = pDocShell->GetDocument();
1501 0 : const ScConsolidateParam* pParam = pDoc->GetConsolidateDlgData();
1502 0 : if (pParam)
1503 0 : pNew->SetParam( *pParam );
1504 : }
1505 0 : return pNew;
1506 : }
1507 :
1508 0 : void SAL_CALL ScModelObj::consolidate(
1509 : const uno::Reference<sheet::XConsolidationDescriptor>& xDescriptor )
1510 : throw (uno::RuntimeException, std::exception)
1511 : {
1512 0 : SolarMutexGuard aGuard;
1513 : // das koennte theoretisch ein fremdes Objekt sein, also nur das
1514 : // oeffentliche XConsolidationDescriptor Interface benutzen, um
1515 : // die Daten in ein ScConsolidationDescriptor Objekt zu kopieren:
1516 : //! wenn es schon ein ScConsolidationDescriptor ist, direkt per getImplementation?
1517 :
1518 0 : ScConsolidationDescriptor aImpl;
1519 0 : aImpl.setFunction( xDescriptor->getFunction() );
1520 0 : aImpl.setSources( xDescriptor->getSources() );
1521 0 : aImpl.setStartOutputPosition( xDescriptor->getStartOutputPosition() );
1522 0 : aImpl.setUseColumnHeaders( xDescriptor->getUseColumnHeaders() );
1523 0 : aImpl.setUseRowHeaders( xDescriptor->getUseRowHeaders() );
1524 0 : aImpl.setInsertLinks( xDescriptor->getInsertLinks() );
1525 :
1526 0 : if (pDocShell)
1527 : {
1528 0 : const ScConsolidateParam& rParam = aImpl.GetParam();
1529 0 : pDocShell->DoConsolidate( rParam, true );
1530 0 : pDocShell->GetDocument()->SetConsolidateDlgData( &rParam );
1531 0 : }
1532 0 : }
1533 :
1534 : // XDocumentAuditing
1535 :
1536 0 : void SAL_CALL ScModelObj::refreshArrows() throw(uno::RuntimeException, std::exception)
1537 : {
1538 0 : SolarMutexGuard aGuard;
1539 0 : if (pDocShell)
1540 0 : pDocShell->GetDocFunc().DetectiveRefresh();
1541 0 : }
1542 :
1543 : // XViewDataSupplier
1544 0 : uno::Reference< container::XIndexAccess > SAL_CALL ScModelObj::getViewData( )
1545 : throw (uno::RuntimeException, std::exception)
1546 : {
1547 0 : uno::Reference < container::XIndexAccess > xRet( SfxBaseModel::getViewData() );
1548 :
1549 0 : if( !xRet.is() )
1550 : {
1551 0 : SolarMutexGuard aGuard;
1552 0 : if (pDocShell && pDocShell->GetCreateMode() == SFX_CREATE_MODE_EMBEDDED)
1553 : {
1554 0 : uno::Reference < container::XIndexContainer > xCont = document::IndexedPropertyValues::create( ::comphelper::getProcessComponentContext() );
1555 0 : xRet.set( xCont, uno::UNO_QUERY_THROW );
1556 :
1557 0 : uno::Sequence< beans::PropertyValue > aSeq;
1558 0 : aSeq.realloc(1);
1559 0 : OUString sName;
1560 0 : pDocShell->GetDocument()->GetName( pDocShell->GetDocument()->GetVisibleTab(), sName );
1561 0 : OUString sOUName(sName);
1562 0 : aSeq[0].Name = SC_ACTIVETABLE;
1563 0 : aSeq[0].Value <<= sOUName;
1564 0 : xCont->insertByIndex( 0, uno::makeAny( aSeq ) );
1565 0 : }
1566 : }
1567 :
1568 0 : return xRet;
1569 : }
1570 :
1571 : // XPropertySet (Doc-Optionen)
1572 : //! auch an der Applikation anbieten?
1573 :
1574 0 : uno::Reference<beans::XPropertySetInfo> SAL_CALL ScModelObj::getPropertySetInfo()
1575 : throw(uno::RuntimeException, std::exception)
1576 : {
1577 0 : SolarMutexGuard aGuard;
1578 : static uno::Reference<beans::XPropertySetInfo> aRef(
1579 0 : new SfxItemPropertySetInfo( aPropSet.getPropertyMap() ));
1580 0 : return aRef;
1581 : }
1582 :
1583 0 : void SAL_CALL ScModelObj::setPropertyValue(
1584 : const OUString& aPropertyName, const uno::Any& aValue )
1585 : throw(beans::UnknownPropertyException, beans::PropertyVetoException,
1586 : lang::IllegalArgumentException, lang::WrappedTargetException,
1587 : uno::RuntimeException, std::exception)
1588 : {
1589 0 : SolarMutexGuard aGuard;
1590 0 : OUString aString(aPropertyName);
1591 :
1592 0 : if (pDocShell)
1593 : {
1594 0 : ScDocument* pDoc = pDocShell->GetDocument();
1595 0 : const ScDocOptions& rOldOpt = pDoc->GetDocOptions();
1596 0 : ScDocOptions aNewOpt = rOldOpt;
1597 : // Don't recalculate while loading XML, when the formula text is stored
1598 : // Recalculation after loading is handled separately.
1599 0 : bool bHardRecalc = !pDoc->IsImportingXML();
1600 :
1601 0 : sal_Bool bOpt = ScDocOptionsHelper::setPropertyValue( aNewOpt, aPropSet.getPropertyMap(), aPropertyName, aValue );
1602 0 : if (bOpt)
1603 : {
1604 : // done...
1605 0 : if ( aString.equalsAscii( SC_UNO_IGNORECASE ) ||
1606 0 : aString.equalsAscii( SC_UNONAME_REGEXP ) ||
1607 0 : aString.equalsAscii( SC_UNO_LOOKUPLABELS ) )
1608 0 : bHardRecalc = false;
1609 : }
1610 0 : else if ( aString.equalsAscii( SC_UNONAME_CLOCAL ) )
1611 : {
1612 0 : lang::Locale aLocale;
1613 0 : if ( aValue >>= aLocale )
1614 : {
1615 : LanguageType eLatin, eCjk, eCtl;
1616 0 : pDoc->GetLanguage( eLatin, eCjk, eCtl );
1617 0 : eLatin = ScUnoConversion::GetLanguage(aLocale);
1618 0 : pDoc->SetLanguage( eLatin, eCjk, eCtl );
1619 0 : }
1620 : }
1621 0 : else if ( aString.equalsAscii( SC_UNO_CODENAME ) )
1622 : {
1623 0 : OUString sCodeName;
1624 0 : if ( aValue >>= sCodeName )
1625 0 : pDoc->SetCodeName( sCodeName );
1626 : }
1627 0 : else if ( aString.equalsAscii( SC_UNO_CJK_CLOCAL ) )
1628 : {
1629 0 : lang::Locale aLocale;
1630 0 : if ( aValue >>= aLocale )
1631 : {
1632 : LanguageType eLatin, eCjk, eCtl;
1633 0 : pDoc->GetLanguage( eLatin, eCjk, eCtl );
1634 0 : eCjk = ScUnoConversion::GetLanguage(aLocale);
1635 0 : pDoc->SetLanguage( eLatin, eCjk, eCtl );
1636 0 : }
1637 : }
1638 0 : else if ( aString.equalsAscii( SC_UNO_CTL_CLOCAL ) )
1639 : {
1640 0 : lang::Locale aLocale;
1641 0 : if ( aValue >>= aLocale )
1642 : {
1643 : LanguageType eLatin, eCjk, eCtl;
1644 0 : pDoc->GetLanguage( eLatin, eCjk, eCtl );
1645 0 : eCtl = ScUnoConversion::GetLanguage(aLocale);
1646 0 : pDoc->SetLanguage( eLatin, eCjk, eCtl );
1647 0 : }
1648 : }
1649 0 : else if ( aString.equalsAscii( SC_UNO_APPLYFMDES ) )
1650 : {
1651 : // model is created if not there
1652 0 : ScDrawLayer* pModel = pDocShell->MakeDrawLayer();
1653 0 : pModel->SetOpenInDesignMode( ScUnoHelpFunctions::GetBoolFromAny( aValue ) );
1654 :
1655 0 : SfxBindings* pBindings = pDocShell->GetViewBindings();
1656 0 : if (pBindings)
1657 0 : pBindings->Invalidate( SID_FM_OPEN_READONLY );
1658 : }
1659 0 : else if ( aString.equalsAscii( SC_UNO_AUTOCONTFOC ) )
1660 : {
1661 : // model is created if not there
1662 0 : ScDrawLayer* pModel = pDocShell->MakeDrawLayer();
1663 0 : pModel->SetAutoControlFocus( ScUnoHelpFunctions::GetBoolFromAny( aValue ) );
1664 :
1665 0 : SfxBindings* pBindings = pDocShell->GetViewBindings();
1666 0 : if (pBindings)
1667 0 : pBindings->Invalidate( SID_FM_AUTOCONTROLFOCUS );
1668 : }
1669 0 : else if ( aString.equalsAscii( SC_UNO_ISLOADED ) )
1670 : {
1671 0 : pDocShell->SetEmpty( !ScUnoHelpFunctions::GetBoolFromAny( aValue ) );
1672 : }
1673 0 : else if ( aString.equalsAscii( SC_UNO_ISUNDOENABLED ) )
1674 : {
1675 0 : sal_Bool bUndoEnabled = ScUnoHelpFunctions::GetBoolFromAny( aValue );
1676 0 : pDoc->EnableUndo( bUndoEnabled );
1677 0 : pDocShell->GetUndoManager()->SetMaxUndoActionCount(
1678 : bUndoEnabled
1679 0 : ? officecfg::Office::Common::Undo::Steps::get() : 0);
1680 : }
1681 0 : else if ( aString.equalsAscii( SC_UNO_ISADJUSTHEIGHTENABLED ) )
1682 : {
1683 0 : bool bOldAdjustHeightEnabled = pDoc->IsAdjustHeightEnabled();
1684 0 : bool bAdjustHeightEnabled = ScUnoHelpFunctions::GetBoolFromAny( aValue );
1685 0 : if( bOldAdjustHeightEnabled != bAdjustHeightEnabled )
1686 0 : pDoc->EnableAdjustHeight( bAdjustHeightEnabled );
1687 : }
1688 0 : else if ( aString.equalsAscii( SC_UNO_ISEXECUTELINKENABLED ) )
1689 : {
1690 0 : pDoc->EnableExecuteLink( ScUnoHelpFunctions::GetBoolFromAny( aValue ) );
1691 : }
1692 0 : else if ( aString.equalsAscii( SC_UNO_ISCHANGEREADONLYENABLED ) )
1693 : {
1694 0 : pDoc->EnableChangeReadOnly( ScUnoHelpFunctions::GetBoolFromAny( aValue ) );
1695 : }
1696 0 : else if ( aString.equalsAscii( "BuildId" ) )
1697 : {
1698 0 : aValue >>= maBuildId;
1699 : }
1700 0 : else if ( aString.equalsAscii( "SavedObject" ) ) // set from chart after saving
1701 : {
1702 0 : OUString aObjName;
1703 0 : aValue >>= aObjName;
1704 0 : if ( !aObjName.isEmpty() )
1705 0 : pDoc->RestoreChartListener( aObjName );
1706 : }
1707 0 : else if ( aString.equalsAscii( SC_UNO_INTEROPGRABBAG ) )
1708 : {
1709 0 : setGrabBagItem(aValue);
1710 : }
1711 :
1712 0 : if ( aNewOpt != rOldOpt )
1713 : {
1714 0 : pDoc->SetDocOptions( aNewOpt );
1715 : //! Recalc only for options that need it?
1716 0 : if ( bHardRecalc )
1717 0 : pDocShell->DoHardRecalc( true );
1718 0 : pDocShell->SetDocumentModified();
1719 0 : }
1720 0 : }
1721 0 : }
1722 :
1723 0 : uno::Any SAL_CALL ScModelObj::getPropertyValue( const OUString& aPropertyName )
1724 : throw(beans::UnknownPropertyException, lang::WrappedTargetException,
1725 : uno::RuntimeException, std::exception)
1726 : {
1727 0 : SolarMutexGuard aGuard;
1728 0 : OUString aString(aPropertyName);
1729 0 : uno::Any aRet;
1730 :
1731 0 : if (pDocShell)
1732 : {
1733 0 : ScDocument* pDoc = pDocShell->GetDocument();
1734 0 : const ScDocOptions& rOpt = pDoc->GetDocOptions();
1735 0 : aRet = ScDocOptionsHelper::getPropertyValue( rOpt, aPropSet.getPropertyMap(), aPropertyName );
1736 0 : if ( aRet.hasValue() )
1737 : {
1738 : // done...
1739 : }
1740 0 : else if ( aString.equalsAscii( SC_UNONAME_CLOCAL ) )
1741 : {
1742 : LanguageType eLatin, eCjk, eCtl;
1743 0 : pDoc->GetLanguage( eLatin, eCjk, eCtl );
1744 :
1745 0 : lang::Locale aLocale;
1746 0 : ScUnoConversion::FillLocale( aLocale, eLatin );
1747 0 : aRet <<= aLocale;
1748 : }
1749 0 : else if ( aString.equalsAscii( SC_UNO_CODENAME ) )
1750 : {
1751 0 : OUString sCodeName = pDoc->GetCodeName();
1752 0 : aRet <<= sCodeName;
1753 : }
1754 :
1755 0 : else if ( aString.equalsAscii( SC_UNO_CJK_CLOCAL ) )
1756 : {
1757 : LanguageType eLatin, eCjk, eCtl;
1758 0 : pDoc->GetLanguage( eLatin, eCjk, eCtl );
1759 :
1760 0 : lang::Locale aLocale;
1761 0 : ScUnoConversion::FillLocale( aLocale, eCjk );
1762 0 : aRet <<= aLocale;
1763 : }
1764 0 : else if ( aString.equalsAscii( SC_UNO_CTL_CLOCAL ) )
1765 : {
1766 : LanguageType eLatin, eCjk, eCtl;
1767 0 : pDoc->GetLanguage( eLatin, eCjk, eCtl );
1768 :
1769 0 : lang::Locale aLocale;
1770 0 : ScUnoConversion::FillLocale( aLocale, eCtl );
1771 0 : aRet <<= aLocale;
1772 : }
1773 0 : else if ( aString.equalsAscii( SC_UNO_NAMEDRANGES ) )
1774 : {
1775 0 : aRet <<= uno::Reference<sheet::XNamedRanges>(new ScGlobalNamedRangesObj( pDocShell ));
1776 : }
1777 0 : else if ( aString.equalsAscii( SC_UNO_DATABASERNG ) )
1778 : {
1779 0 : aRet <<= uno::Reference<sheet::XDatabaseRanges>(new ScDatabaseRangesObj( pDocShell ));
1780 : }
1781 0 : else if ( aString.equalsAscii( SC_UNO_UNNAMEDDBRNG ) )
1782 : {
1783 0 : aRet <<= uno::Reference<sheet::XUnnamedDatabaseRanges>(new ScUnnamedDatabaseRangesObj(pDocShell));
1784 : }
1785 0 : else if ( aString.equalsAscii( SC_UNO_COLLABELRNG ) )
1786 : {
1787 0 : aRet <<= uno::Reference<sheet::XLabelRanges>(new ScLabelRangesObj( pDocShell, true ));
1788 : }
1789 0 : else if ( aString.equalsAscii( SC_UNO_ROWLABELRNG ) )
1790 : {
1791 0 : aRet <<= uno::Reference<sheet::XLabelRanges>(new ScLabelRangesObj( pDocShell, false ));
1792 : }
1793 0 : else if ( aString.equalsAscii( SC_UNO_AREALINKS ) )
1794 : {
1795 0 : aRet <<= uno::Reference<sheet::XAreaLinks>(new ScAreaLinksObj( pDocShell ));
1796 : }
1797 0 : else if ( aString.equalsAscii( SC_UNO_DDELINKS ) )
1798 : {
1799 0 : aRet <<= uno::Reference<container::XNameAccess>(new ScDDELinksObj( pDocShell ));
1800 : }
1801 0 : else if ( aString.equalsAscii( SC_UNO_EXTERNALDOCLINKS ) )
1802 : {
1803 0 : aRet <<= uno::Reference<sheet::XExternalDocLinks>(new ScExternalDocLinksObj(pDocShell));
1804 : }
1805 0 : else if ( aString.equalsAscii( SC_UNO_SHEETLINKS ) )
1806 : {
1807 0 : aRet <<= uno::Reference<container::XNameAccess>(new ScSheetLinksObj( pDocShell ));
1808 : }
1809 0 : else if ( aString.equalsAscii( SC_UNO_APPLYFMDES ) )
1810 : {
1811 : // default for no model is TRUE
1812 0 : ScDrawLayer* pModel = pDoc->GetDrawLayer();
1813 0 : sal_Bool bOpenInDesign = pModel ? pModel->GetOpenInDesignMode() : sal_True;
1814 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, bOpenInDesign );
1815 : }
1816 0 : else if ( aString.equalsAscii( SC_UNO_AUTOCONTFOC ) )
1817 : {
1818 : // default for no model is FALSE
1819 0 : ScDrawLayer* pModel = pDoc->GetDrawLayer();
1820 0 : sal_Bool bAutoControlFocus = pModel ? pModel->GetAutoControlFocus() : false;
1821 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, bAutoControlFocus );
1822 : }
1823 0 : else if ( aString.equalsAscii( SC_UNO_FORBIDDEN ) )
1824 : {
1825 0 : aRet <<= uno::Reference<i18n::XForbiddenCharacters>(new ScForbiddenCharsObj( pDocShell ));
1826 : }
1827 0 : else if ( aString.equalsAscii( SC_UNO_HASDRAWPAGES ) )
1828 : {
1829 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, (pDocShell->GetDocument()->GetDrawLayer() != 0) );
1830 : }
1831 0 : else if ( aString.equalsAscii( SC_UNO_BASICLIBRARIES ) )
1832 : {
1833 0 : aRet <<= pDocShell->GetBasicContainer();
1834 : }
1835 0 : else if ( aString.equalsAscii( SC_UNO_DIALOGLIBRARIES ) )
1836 : {
1837 0 : aRet <<= pDocShell->GetDialogContainer();
1838 : }
1839 0 : else if ( aString.equalsAscii( SC_UNO_VBAGLOBNAME ) )
1840 : {
1841 : /* #i111553# This property provides the name of the constant that
1842 : will be used to store this model in the global Basic manager.
1843 : That constant will be equivelant to 'ThisComponent' but for
1844 : each application, so e.g. a 'ThisExcelDoc' and a 'ThisWordDoc'
1845 : constant can co-exist, as required by VBA. */
1846 0 : aRet <<= OUString( "ThisExcelDoc" );
1847 : }
1848 0 : else if ( aString.equalsAscii( SC_UNO_RUNTIMEUID ) )
1849 : {
1850 0 : aRet <<= getRuntimeUID();
1851 : }
1852 0 : else if ( aString.equalsAscii( SC_UNO_HASVALIDSIGNATURES ) )
1853 : {
1854 0 : aRet <<= hasValidSignatures();
1855 : }
1856 0 : else if ( aString.equalsAscii( SC_UNO_ISLOADED ) )
1857 : {
1858 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, !pDocShell->IsEmpty() );
1859 : }
1860 0 : else if ( aString.equalsAscii( SC_UNO_ISUNDOENABLED ) )
1861 : {
1862 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, pDoc->IsUndoEnabled() );
1863 : }
1864 0 : else if ( aString.equalsAscii( SC_UNO_ISADJUSTHEIGHTENABLED ) )
1865 : {
1866 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, pDoc->IsAdjustHeightEnabled() );
1867 : }
1868 0 : else if ( aString.equalsAscii( SC_UNO_ISEXECUTELINKENABLED ) )
1869 : {
1870 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, pDoc->IsExecuteLinkEnabled() );
1871 : }
1872 0 : else if ( aString.equalsAscii( SC_UNO_ISCHANGEREADONLYENABLED ) )
1873 : {
1874 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, pDoc->IsChangeReadOnlyEnabled() );
1875 : }
1876 0 : else if ( aString.equalsAscii( SC_UNO_REFERENCEDEVICE ) )
1877 : {
1878 0 : VCLXDevice* pXDev = new VCLXDevice();
1879 0 : pXDev->SetOutputDevice( pDoc->GetRefDevice() );
1880 0 : aRet <<= uno::Reference< awt::XDevice >( pXDev );
1881 : }
1882 0 : else if ( aString.equalsAscii( "BuildId" ) )
1883 : {
1884 0 : aRet <<= maBuildId;
1885 : }
1886 0 : else if ( aString.equalsAscii( "InternalDocument" ) )
1887 : {
1888 0 : ScUnoHelpFunctions::SetBoolInAny( aRet, (pDocShell->GetCreateMode() == SFX_CREATE_MODE_INTERNAL) );
1889 : }
1890 0 : else if ( aString.equalsAscii( SC_UNO_INTEROPGRABBAG ) )
1891 : {
1892 0 : getGrabBagItem(aRet);
1893 : }
1894 : }
1895 :
1896 0 : return aRet;
1897 : }
1898 :
1899 0 : SC_IMPL_DUMMY_PROPERTY_LISTENER( ScModelObj )
1900 :
1901 : // XMultiServiceFactory
1902 :
1903 0 : css::uno::Reference<css::uno::XInterface> ScModelObj::create(
1904 : OUString const & aServiceSpecifier,
1905 : css::uno::Sequence<css::uno::Any> const * arguments)
1906 : {
1907 0 : uno::Reference<uno::XInterface> xRet;
1908 0 : OUString aNameStr(aServiceSpecifier);
1909 0 : sal_uInt16 nType = ScServiceProvider::GetProviderType(aNameStr);
1910 0 : if ( nType != SC_SERVICE_INVALID )
1911 : {
1912 : // drawing layer tables must be kept as long as the model is alive
1913 : // return stored instance if already set
1914 0 : switch ( nType )
1915 : {
1916 0 : case SC_SERVICE_GRADTAB: xRet.set(xDrawGradTab); break;
1917 0 : case SC_SERVICE_HATCHTAB: xRet.set(xDrawHatchTab); break;
1918 0 : case SC_SERVICE_BITMAPTAB: xRet.set(xDrawBitmapTab); break;
1919 0 : case SC_SERVICE_TRGRADTAB: xRet.set(xDrawTrGradTab); break;
1920 0 : case SC_SERVICE_MARKERTAB: xRet.set(xDrawMarkerTab); break;
1921 0 : case SC_SERVICE_DASHTAB: xRet.set(xDrawDashTab); break;
1922 0 : case SC_SERVICE_CHDATAPROV: xRet.set(xChartDataProv); break;
1923 0 : case SC_SERVICE_VBAOBJECTPROVIDER: xRet.set(xObjProvider); break;
1924 : }
1925 :
1926 : // #i64497# If a chart is in a temporary document during clipoard paste,
1927 : // there should be no data provider, so that own data is used
1928 : bool bCreate =
1929 : ! ( nType == SC_SERVICE_CHDATAPROV &&
1930 0 : ( pDocShell->GetCreateMode() == SFX_CREATE_MODE_INTERNAL ));
1931 : // this should never happen, i.e. the temporary document should never be
1932 : // loaded, because this unlinks the data
1933 : OSL_ASSERT( bCreate );
1934 :
1935 0 : if ( !xRet.is() && bCreate )
1936 : {
1937 0 : xRet.set(ScServiceProvider::MakeInstance( nType, pDocShell ));
1938 :
1939 : // store created instance
1940 0 : switch ( nType )
1941 : {
1942 0 : case SC_SERVICE_GRADTAB: xDrawGradTab.set(xRet); break;
1943 0 : case SC_SERVICE_HATCHTAB: xDrawHatchTab.set(xRet); break;
1944 0 : case SC_SERVICE_BITMAPTAB: xDrawBitmapTab.set(xRet); break;
1945 0 : case SC_SERVICE_TRGRADTAB: xDrawTrGradTab.set(xRet); break;
1946 0 : case SC_SERVICE_MARKERTAB: xDrawMarkerTab.set(xRet); break;
1947 0 : case SC_SERVICE_DASHTAB: xDrawDashTab.set(xRet); break;
1948 0 : case SC_SERVICE_CHDATAPROV: xChartDataProv.set(xRet); break;
1949 0 : case SC_SERVICE_VBAOBJECTPROVIDER: xObjProvider.set(xRet); break;
1950 : }
1951 : }
1952 : }
1953 : else
1954 : {
1955 : // alles was ich nicht kenn, werf ich der SvxFmMSFactory an den Hals,
1956 : // da wird dann 'ne Exception geworfen, wenn's nicht passt...
1957 :
1958 : try
1959 : {
1960 0 : xRet = arguments == 0
1961 : ? SvxFmMSFactory::createInstance(aServiceSpecifier)
1962 : : SvxFmMSFactory::createInstanceWithArguments(
1963 0 : aServiceSpecifier, *arguments);
1964 : // extra block to force deletion of the temporary before ScShapeObj ctor (setDelegator)
1965 : }
1966 0 : catch ( lang::ServiceNotRegisteredException & )
1967 : {
1968 : }
1969 :
1970 : // if the drawing factory created a shape, a ScShapeObj has to be used
1971 : // to support own properties like ImageMap:
1972 :
1973 0 : uno::Reference<drawing::XShape> xShape( xRet, uno::UNO_QUERY );
1974 0 : if ( xShape.is() )
1975 : {
1976 0 : xRet.clear(); // for aggregation, xShape must be the object's only ref
1977 0 : new ScShapeObj( xShape ); // aggregates object and modifies xShape
1978 0 : xRet.set(xShape);
1979 0 : }
1980 : }
1981 0 : return xRet;
1982 : }
1983 :
1984 0 : uno::Reference<uno::XInterface> SAL_CALL ScModelObj::createInstance(
1985 : const OUString& aServiceSpecifier )
1986 : throw(uno::Exception, uno::RuntimeException, std::exception)
1987 : {
1988 0 : SolarMutexGuard aGuard;
1989 0 : return create(aServiceSpecifier, 0);
1990 : }
1991 :
1992 0 : uno::Reference<uno::XInterface> SAL_CALL ScModelObj::createInstanceWithArguments(
1993 : const OUString& ServiceSpecifier,
1994 : const uno::Sequence<uno::Any>& aArgs )
1995 : throw(uno::Exception, uno::RuntimeException, std::exception)
1996 : {
1997 : //! unterscheiden zwischen eigenen Services und denen vom Drawing-Layer?
1998 :
1999 0 : SolarMutexGuard aGuard;
2000 0 : uno::Reference<uno::XInterface> xInt(create(ServiceSpecifier, &aArgs));
2001 :
2002 0 : if ( aArgs.getLength() )
2003 : {
2004 : // used only for cell value binding so far - it can be initialized after creating
2005 :
2006 0 : uno::Reference<lang::XInitialization> xInit( xInt, uno::UNO_QUERY );
2007 0 : if ( xInit.is() )
2008 0 : xInit->initialize( aArgs );
2009 : }
2010 :
2011 0 : return xInt;
2012 : }
2013 :
2014 0 : uno::Sequence<OUString> SAL_CALL ScModelObj::getAvailableServiceNames()
2015 : throw(uno::RuntimeException, std::exception)
2016 : {
2017 0 : SolarMutexGuard aGuard;
2018 :
2019 : //! warum sind die Parameter bei concatServiceNames nicht const ???
2020 : //! return concatServiceNames( ScServiceProvider::GetAllServiceNames(),
2021 : //! SvxFmMSFactory::getAvailableServiceNames() );
2022 :
2023 0 : uno::Sequence<OUString> aMyServices(ScServiceProvider::GetAllServiceNames());
2024 0 : uno::Sequence<OUString> aDrawServices(SvxFmMSFactory::getAvailableServiceNames());
2025 :
2026 0 : return concatServiceNames( aMyServices, aDrawServices );
2027 : }
2028 :
2029 : // XServiceInfo
2030 0 : OUString SAL_CALL ScModelObj::getImplementationName() throw(uno::RuntimeException, std::exception)
2031 : {
2032 0 : return OUString( "ScModelObj" );
2033 : }
2034 :
2035 0 : sal_Bool SAL_CALL ScModelObj::supportsService( const OUString& rServiceName )
2036 : throw(uno::RuntimeException, std::exception)
2037 : {
2038 0 : return cppu::supportsService(this, rServiceName);
2039 : }
2040 :
2041 0 : uno::Sequence<OUString> SAL_CALL ScModelObj::getSupportedServiceNames()
2042 : throw(uno::RuntimeException, std::exception)
2043 : {
2044 0 : uno::Sequence<OUString> aRet(3);
2045 0 : aRet[0] = SCMODELOBJ_SERVICE;
2046 0 : aRet[1] = SCDOCSETTINGS_SERVICE;
2047 0 : aRet[2] = SCDOC_SERVICE;
2048 0 : return aRet;
2049 : }
2050 :
2051 : // XUnoTunnel
2052 :
2053 0 : sal_Int64 SAL_CALL ScModelObj::getSomething(
2054 : const uno::Sequence<sal_Int8 >& rId ) throw(uno::RuntimeException, std::exception)
2055 : {
2056 0 : if ( rId.getLength() == 16 &&
2057 0 : 0 == memcmp( getUnoTunnelId().getConstArray(),
2058 0 : rId.getConstArray(), 16 ) )
2059 : {
2060 0 : return sal::static_int_cast<sal_Int64>(reinterpret_cast<sal_IntPtr>(this));
2061 : }
2062 :
2063 0 : if ( rId.getLength() == 16 &&
2064 0 : 0 == memcmp( SfxObjectShell::getUnoTunnelId().getConstArray(),
2065 0 : rId.getConstArray(), 16 ) )
2066 : {
2067 0 : return sal::static_int_cast<sal_Int64>(reinterpret_cast<sal_IntPtr>(pDocShell ));
2068 : }
2069 :
2070 : // aggregated number formats supplier has XUnoTunnel, too
2071 : // interface from aggregated object must be obtained via queryAggregation
2072 :
2073 0 : sal_Int64 nRet = SfxBaseModel::getSomething( rId );
2074 0 : if ( nRet )
2075 0 : return nRet;
2076 :
2077 0 : if ( GetFormatter().is() )
2078 : {
2079 0 : const uno::Type& rTunnelType = ::getCppuType((uno::Reference<lang::XUnoTunnel>*) 0);
2080 0 : uno::Any aNumTunnel(xNumberAgg->queryAggregation(rTunnelType));
2081 0 : if(aNumTunnel.getValueType() == rTunnelType)
2082 : {
2083 : uno::Reference<lang::XUnoTunnel> xTunnelAgg(
2084 0 : *(uno::Reference<lang::XUnoTunnel>*)aNumTunnel.getValue());
2085 0 : return xTunnelAgg->getSomething( rId );
2086 0 : }
2087 : }
2088 :
2089 0 : return 0;
2090 : }
2091 :
2092 : namespace
2093 : {
2094 : class theScModelObjUnoTunnelId : public rtl::Static< UnoTunnelIdInit, theScModelObjUnoTunnelId> {};
2095 : }
2096 :
2097 0 : const uno::Sequence<sal_Int8>& ScModelObj::getUnoTunnelId()
2098 : {
2099 0 : return theScModelObjUnoTunnelId::get().getSeq();
2100 : }
2101 :
2102 0 : ScModelObj* ScModelObj::getImplementation( const uno::Reference<uno::XInterface> xObj )
2103 : {
2104 0 : ScModelObj* pRet = NULL;
2105 0 : uno::Reference<lang::XUnoTunnel> xUT( xObj, uno::UNO_QUERY );
2106 0 : if (xUT.is())
2107 0 : pRet = reinterpret_cast<ScModelObj*>(sal::static_int_cast<sal_IntPtr>(xUT->getSomething(getUnoTunnelId())));
2108 0 : return pRet;
2109 : }
2110 :
2111 : // XChangesNotifier
2112 :
2113 0 : void ScModelObj::addChangesListener( const uno::Reference< util::XChangesListener >& aListener )
2114 : throw (uno::RuntimeException, std::exception)
2115 : {
2116 0 : SolarMutexGuard aGuard;
2117 0 : maChangesListeners.addInterface( aListener );
2118 0 : }
2119 :
2120 0 : void ScModelObj::removeChangesListener( const uno::Reference< util::XChangesListener >& aListener )
2121 : throw (uno::RuntimeException, std::exception)
2122 : {
2123 0 : SolarMutexGuard aGuard;
2124 0 : maChangesListeners.removeInterface( aListener );
2125 0 : }
2126 :
2127 0 : bool ScModelObj::HasChangesListeners() const
2128 : {
2129 0 : if ( maChangesListeners.getLength() > 0 )
2130 0 : return true;
2131 :
2132 : // "change" event set in any sheet?
2133 0 : return pDocShell && pDocShell->GetDocument()->HasAnySheetEventScript(SC_SHEETEVENT_CHANGE);
2134 : }
2135 :
2136 0 : void ScModelObj::NotifyChanges( const OUString& rOperation, const ScRangeList& rRanges,
2137 : const uno::Sequence< beans::PropertyValue >& rProperties )
2138 : {
2139 0 : if ( pDocShell && HasChangesListeners() )
2140 : {
2141 0 : util::ChangesEvent aEvent;
2142 0 : aEvent.Source.set( static_cast< cppu::OWeakObject* >( this ) );
2143 0 : aEvent.Base <<= aEvent.Source;
2144 :
2145 0 : size_t nRangeCount = rRanges.size();
2146 0 : aEvent.Changes.realloc( static_cast< sal_Int32 >( nRangeCount ) );
2147 0 : for ( size_t nIndex = 0; nIndex < nRangeCount; ++nIndex )
2148 : {
2149 0 : uno::Reference< table::XCellRange > xRangeObj;
2150 :
2151 0 : ScRange aRange( *rRanges[ nIndex ] );
2152 0 : if ( aRange.aStart == aRange.aEnd )
2153 : {
2154 0 : xRangeObj.set( new ScCellObj( pDocShell, aRange.aStart ) );
2155 : }
2156 : else
2157 : {
2158 0 : xRangeObj.set( new ScCellRangeObj( pDocShell, aRange ) );
2159 : }
2160 :
2161 0 : util::ElementChange& rChange = aEvent.Changes[ static_cast< sal_Int32 >( nIndex ) ];
2162 0 : rChange.Accessor <<= rOperation;
2163 0 : rChange.Element <<= rProperties;
2164 0 : rChange.ReplacedElement <<= xRangeObj;
2165 0 : }
2166 :
2167 0 : ::cppu::OInterfaceIteratorHelper aIter( maChangesListeners );
2168 0 : while ( aIter.hasMoreElements() )
2169 : {
2170 : try
2171 : {
2172 0 : static_cast< util::XChangesListener* >( aIter.next() )->changesOccurred( aEvent );
2173 : }
2174 0 : catch( uno::Exception& )
2175 : {
2176 : }
2177 0 : }
2178 : }
2179 :
2180 : // handle sheet events
2181 : //! separate method with ScMarkData? Then change HasChangesListeners back.
2182 0 : if ( rOperation.equalsAscii("cell-change") && pDocShell )
2183 : {
2184 0 : ScMarkData aMarkData;
2185 0 : aMarkData.MarkFromRangeList( rRanges, false );
2186 0 : ScDocument* pDoc = pDocShell->GetDocument();
2187 0 : SCTAB nTabCount = pDoc->GetTableCount();
2188 0 : ScMarkData::iterator itr = aMarkData.begin(), itrEnd = aMarkData.end();
2189 0 : for (; itr != itrEnd && *itr < nTabCount; ++itr)
2190 : {
2191 0 : SCTAB nTab = *itr;
2192 0 : const ScSheetEvents* pEvents = pDoc->GetSheetEvents(nTab);
2193 0 : if (pEvents)
2194 : {
2195 0 : const OUString* pScript = pEvents->GetScript(SC_SHEETEVENT_CHANGE);
2196 0 : if (pScript)
2197 : {
2198 0 : ScRangeList aTabRanges; // collect ranges on this sheet
2199 0 : size_t nRangeCount = rRanges.size();
2200 0 : for ( size_t nIndex = 0; nIndex < nRangeCount; ++nIndex )
2201 : {
2202 0 : ScRange aRange( *rRanges[ nIndex ] );
2203 0 : if ( aRange.aStart.Tab() == nTab )
2204 0 : aTabRanges.Append( aRange );
2205 : }
2206 0 : size_t nTabRangeCount = aTabRanges.size();
2207 0 : if ( nTabRangeCount > 0 )
2208 : {
2209 0 : uno::Reference<uno::XInterface> xTarget;
2210 0 : if ( nTabRangeCount == 1 )
2211 : {
2212 0 : ScRange aRange( *aTabRanges[ 0 ] );
2213 0 : if ( aRange.aStart == aRange.aEnd )
2214 0 : xTarget.set( static_cast<cppu::OWeakObject*>( new ScCellObj( pDocShell, aRange.aStart ) ) );
2215 : else
2216 0 : xTarget.set( static_cast<cppu::OWeakObject*>( new ScCellRangeObj( pDocShell, aRange ) ) );
2217 : }
2218 : else
2219 0 : xTarget.set( static_cast<cppu::OWeakObject*>( new ScCellRangesObj( pDocShell, aTabRanges ) ) );
2220 :
2221 0 : uno::Sequence<uno::Any> aParams(1);
2222 0 : aParams[0] <<= xTarget;
2223 :
2224 0 : uno::Any aRet;
2225 0 : uno::Sequence<sal_Int16> aOutArgsIndex;
2226 0 : uno::Sequence<uno::Any> aOutArgs;
2227 :
2228 0 : /*ErrCode eRet =*/ pDocShell->CallXScript( *pScript, aParams, aRet, aOutArgsIndex, aOutArgs );
2229 0 : }
2230 : }
2231 : }
2232 0 : }
2233 : }
2234 0 : }
2235 :
2236 0 : void ScModelObj::HandleCalculateEvents()
2237 : {
2238 0 : if (pDocShell)
2239 : {
2240 0 : ScDocument* pDoc = pDocShell->GetDocument();
2241 : // don't call events before the document is visible
2242 : // (might also set a flag on SFX_EVENT_LOADFINISHED and only disable while loading)
2243 0 : if ( pDoc->IsDocVisible() )
2244 : {
2245 0 : SCTAB nTabCount = pDoc->GetTableCount();
2246 0 : for (SCTAB nTab = 0; nTab < nTabCount; nTab++)
2247 : {
2248 0 : if (pDoc->HasCalcNotification(nTab))
2249 : {
2250 0 : if (const ScSheetEvents* pEvents = pDoc->GetSheetEvents( nTab ))
2251 : {
2252 0 : if (const OUString* pScript = pEvents->GetScript(SC_SHEETEVENT_CALCULATE))
2253 : {
2254 0 : uno::Any aRet;
2255 0 : uno::Sequence<uno::Any> aParams;
2256 0 : uno::Sequence<sal_Int16> aOutArgsIndex;
2257 0 : uno::Sequence<uno::Any> aOutArgs;
2258 0 : pDocShell->CallXScript( *pScript, aParams, aRet, aOutArgsIndex, aOutArgs );
2259 : }
2260 : }
2261 :
2262 : try
2263 : {
2264 0 : uno::Reference< script::vba::XVBAEventProcessor > xVbaEvents( pDoc->GetVbaEventProcessor(), uno::UNO_SET_THROW );
2265 0 : uno::Sequence< uno::Any > aArgs( 1 );
2266 0 : aArgs[ 0 ] <<= nTab;
2267 0 : xVbaEvents->processVbaEvent( ScSheetEvents::GetVbaSheetEventId( SC_SHEETEVENT_CALCULATE ), aArgs );
2268 : }
2269 0 : catch( uno::Exception& )
2270 : {
2271 : }
2272 : }
2273 : }
2274 : }
2275 0 : pDoc->ResetCalcNotifications();
2276 : }
2277 0 : }
2278 :
2279 : // XOpenCLSelection
2280 :
2281 0 : sal_Bool ScModelObj::isOpenCLEnabled()
2282 : throw (uno::RuntimeException, std::exception)
2283 : {
2284 0 : return ScInterpreter::GetGlobalConfig().mbOpenCLEnabled;
2285 : }
2286 :
2287 0 : void ScModelObj::enableOpenCL(sal_Bool bEnable)
2288 : throw (uno::RuntimeException, std::exception)
2289 : {
2290 0 : ScCalcConfig aConfig = ScInterpreter::GetGlobalConfig();
2291 0 : aConfig.mbOpenCLEnabled = bEnable;
2292 0 : ScInterpreter::SetGlobalConfig(aConfig);
2293 0 : }
2294 :
2295 0 : void ScModelObj::enableAutomaticDeviceSelection(sal_Bool bForce)
2296 : throw (uno::RuntimeException, std::exception)
2297 : {
2298 0 : ScCalcConfig aConfig = ScInterpreter::GetGlobalConfig();
2299 0 : aConfig.mbOpenCLAutoSelect = true;
2300 0 : ScInterpreter::SetGlobalConfig(aConfig);
2301 0 : ScFormulaOptions aOptions = SC_MOD()->GetFormulaOptions();
2302 0 : aOptions.SetCalcConfig(aConfig);
2303 0 : SC_MOD()->SetFormulaOptions(aOptions);
2304 0 : sc::FormulaGroupInterpreter::switchOpenCLDevice(OUString(), true, bForce);
2305 0 : }
2306 :
2307 0 : void ScModelObj::disableAutomaticDeviceSelection()
2308 : throw (uno::RuntimeException, std::exception)
2309 : {
2310 0 : ScCalcConfig aConfig = ScInterpreter::GetGlobalConfig();
2311 0 : aConfig.mbOpenCLAutoSelect = false;
2312 0 : ScInterpreter::SetGlobalConfig(aConfig);
2313 0 : ScFormulaOptions aOptions = SC_MOD()->GetFormulaOptions();
2314 0 : aOptions.SetCalcConfig(aConfig);
2315 0 : SC_MOD()->SetFormulaOptions(aOptions);
2316 0 : }
2317 :
2318 0 : void ScModelObj::selectOpenCLDevice( sal_Int32 nPlatform, sal_Int32 nDevice )
2319 : throw (uno::RuntimeException, std::exception)
2320 : {
2321 0 : if(nPlatform < 0 || nDevice < 0)
2322 0 : throw uno::RuntimeException();
2323 :
2324 0 : std::vector<sc::OpenclPlatformInfo> aPlatformInfo;
2325 0 : sc::FormulaGroupInterpreter::fillOpenCLInfo(aPlatformInfo);
2326 0 : if(size_t(nPlatform) >= aPlatformInfo.size())
2327 0 : throw uno::RuntimeException();
2328 :
2329 0 : if(size_t(nDevice) >= aPlatformInfo[nPlatform].maDevices.size())
2330 0 : throw uno::RuntimeException();
2331 :
2332 0 : OUString aDeviceString = aPlatformInfo[nPlatform].maVendor + " " + aPlatformInfo[nPlatform].maDevices[nDevice].maName;
2333 0 : sc::FormulaGroupInterpreter::switchOpenCLDevice(aDeviceString, false);
2334 0 : }
2335 :
2336 0 : sal_Int32 ScModelObj::getPlatformID()
2337 : throw (uno::RuntimeException, std::exception)
2338 : {
2339 : sal_Int32 nPlatformId;
2340 : sal_Int32 nDeviceId;
2341 0 : sc::FormulaGroupInterpreter::getOpenCLDeviceInfo(nDeviceId, nPlatformId);
2342 0 : return nPlatformId;
2343 : }
2344 :
2345 0 : sal_Int32 ScModelObj::getDeviceID()
2346 : throw (uno::RuntimeException, std::exception)
2347 : {
2348 : sal_Int32 nPlatformId;
2349 : sal_Int32 nDeviceId;
2350 0 : sc::FormulaGroupInterpreter::getOpenCLDeviceInfo(nDeviceId, nPlatformId);
2351 0 : return nDeviceId;
2352 : }
2353 :
2354 0 : uno::Sequence< sheet::opencl::OpenCLPlatform > ScModelObj::getOpenCLPlatforms()
2355 : throw (uno::RuntimeException, std::exception)
2356 : {
2357 0 : std::vector<sc::OpenclPlatformInfo> aPlatformInfo;
2358 0 : sc::FormulaGroupInterpreter::fillOpenCLInfo(aPlatformInfo);
2359 :
2360 0 : uno::Sequence<sheet::opencl::OpenCLPlatform> aRet(aPlatformInfo.size());
2361 0 : for(size_t i = 0; i < aPlatformInfo.size(); ++i)
2362 : {
2363 0 : aRet[i].Name = aPlatformInfo[i].maName;
2364 0 : aRet[i].Vendor = aPlatformInfo[i].maVendor;
2365 :
2366 0 : aRet[i].Devices.realloc(aPlatformInfo[i].maDevices.size());
2367 0 : for(size_t j = 0; j < aPlatformInfo[i].maDevices.size(); ++j)
2368 : {
2369 0 : const sc::OpenclDeviceInfo& rDevice = aPlatformInfo[i].maDevices[j];
2370 0 : aRet[i].Devices[j].Name = rDevice.maName;
2371 0 : aRet[i].Devices[j].Vendor = rDevice.maVendor;
2372 0 : aRet[i].Devices[j].Driver = rDevice.maDriver;
2373 : }
2374 : }
2375 :
2376 0 : return aRet;
2377 : }
2378 :
2379 :
2380 0 : ScDrawPagesObj::ScDrawPagesObj(ScDocShell* pDocSh) :
2381 0 : pDocShell( pDocSh )
2382 : {
2383 0 : pDocShell->GetDocument()->AddUnoObject(*this);
2384 0 : }
2385 :
2386 0 : ScDrawPagesObj::~ScDrawPagesObj()
2387 : {
2388 0 : if (pDocShell)
2389 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
2390 0 : }
2391 :
2392 0 : void ScDrawPagesObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
2393 : {
2394 : // Referenz-Update interessiert hier nicht
2395 :
2396 0 : if ( rHint.ISA( SfxSimpleHint ) &&
2397 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
2398 : {
2399 0 : pDocShell = NULL; // ungueltig geworden
2400 : }
2401 0 : }
2402 :
2403 0 : uno::Reference<drawing::XDrawPage> ScDrawPagesObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const
2404 : {
2405 0 : if (pDocShell)
2406 : {
2407 0 : ScDrawLayer* pDrawLayer = pDocShell->MakeDrawLayer();
2408 : OSL_ENSURE(pDrawLayer,"kann Draw-Layer nicht anlegen");
2409 0 : if ( pDrawLayer && nIndex >= 0 && nIndex < pDocShell->GetDocument()->GetTableCount() )
2410 : {
2411 0 : SdrPage* pPage = pDrawLayer->GetPage((sal_uInt16)nIndex);
2412 : OSL_ENSURE(pPage,"Draw-Page nicht gefunden");
2413 0 : if (pPage)
2414 : {
2415 0 : return uno::Reference<drawing::XDrawPage> (pPage->getUnoPage(), uno::UNO_QUERY);
2416 : }
2417 : }
2418 : }
2419 0 : return NULL;
2420 : }
2421 :
2422 : // XDrawPages
2423 :
2424 0 : uno::Reference<drawing::XDrawPage> SAL_CALL ScDrawPagesObj::insertNewByIndex( sal_Int32 nPos )
2425 : throw(uno::RuntimeException, std::exception)
2426 : {
2427 0 : SolarMutexGuard aGuard;
2428 0 : uno::Reference<drawing::XDrawPage> xRet;
2429 0 : if (pDocShell)
2430 : {
2431 0 : OUString aNewName;
2432 0 : pDocShell->GetDocument()->CreateValidTabName(aNewName);
2433 0 : if ( pDocShell->GetDocFunc().InsertTable( static_cast<SCTAB>(nPos),
2434 0 : aNewName, true, true ) )
2435 0 : xRet.set(GetObjectByIndex_Impl( nPos ));
2436 : }
2437 0 : return xRet;
2438 : }
2439 :
2440 0 : void SAL_CALL ScDrawPagesObj::remove( const uno::Reference<drawing::XDrawPage>& xPage )
2441 : throw(uno::RuntimeException, std::exception)
2442 : {
2443 0 : SolarMutexGuard aGuard;
2444 0 : SvxDrawPage* pImp = SvxDrawPage::getImplementation( xPage );
2445 0 : if ( pDocShell && pImp )
2446 : {
2447 0 : SdrPage* pPage = pImp->GetSdrPage();
2448 0 : if (pPage)
2449 : {
2450 0 : SCTAB nPageNum = static_cast<SCTAB>(pPage->GetPageNum());
2451 0 : pDocShell->GetDocFunc().DeleteTable( nPageNum, true, true );
2452 : }
2453 0 : }
2454 0 : }
2455 :
2456 : // XIndexAccess
2457 :
2458 0 : sal_Int32 SAL_CALL ScDrawPagesObj::getCount() throw(uno::RuntimeException, std::exception)
2459 : {
2460 0 : SolarMutexGuard aGuard;
2461 0 : if (pDocShell)
2462 0 : return pDocShell->GetDocument()->GetTableCount();
2463 0 : return 0;
2464 : }
2465 :
2466 0 : uno::Any SAL_CALL ScDrawPagesObj::getByIndex( sal_Int32 nIndex )
2467 : throw(lang::IndexOutOfBoundsException,
2468 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2469 : {
2470 0 : SolarMutexGuard aGuard;
2471 0 : uno::Reference<drawing::XDrawPage> xPage(GetObjectByIndex_Impl(nIndex));
2472 0 : if (xPage.is())
2473 0 : return uno::makeAny(xPage);
2474 : else
2475 0 : throw lang::IndexOutOfBoundsException();
2476 : }
2477 :
2478 0 : uno::Type SAL_CALL ScDrawPagesObj::getElementType() throw(uno::RuntimeException, std::exception)
2479 : {
2480 0 : SolarMutexGuard aGuard;
2481 0 : return getCppuType((uno::Reference<drawing::XDrawPage>*)0);
2482 : }
2483 :
2484 0 : sal_Bool SAL_CALL ScDrawPagesObj::hasElements() throw(uno::RuntimeException, std::exception)
2485 : {
2486 0 : SolarMutexGuard aGuard;
2487 0 : return ( getCount() != 0 );
2488 : }
2489 :
2490 0 : ScTableSheetsObj::ScTableSheetsObj(ScDocShell* pDocSh) :
2491 0 : pDocShell( pDocSh )
2492 : {
2493 0 : pDocShell->GetDocument()->AddUnoObject(*this);
2494 0 : }
2495 :
2496 0 : ScTableSheetsObj::~ScTableSheetsObj()
2497 : {
2498 0 : if (pDocShell)
2499 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
2500 0 : }
2501 :
2502 0 : void ScTableSheetsObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
2503 : {
2504 : // Referenz-Update interessiert hier nicht
2505 :
2506 0 : if ( rHint.ISA( SfxSimpleHint ) &&
2507 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
2508 : {
2509 0 : pDocShell = NULL; // ungueltig geworden
2510 : }
2511 0 : }
2512 :
2513 : // XSpreadsheets
2514 :
2515 0 : ScTableSheetObj* ScTableSheetsObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const
2516 : {
2517 0 : if ( pDocShell && nIndex >= 0 && nIndex < pDocShell->GetDocument()->GetTableCount() )
2518 0 : return new ScTableSheetObj( pDocShell, static_cast<SCTAB>(nIndex) );
2519 :
2520 0 : return NULL;
2521 : }
2522 :
2523 0 : ScTableSheetObj* ScTableSheetsObj::GetObjectByName_Impl(const OUString& aName) const
2524 : {
2525 0 : if (pDocShell)
2526 : {
2527 : SCTAB nIndex;
2528 0 : if ( pDocShell->GetDocument()->GetTable( aName, nIndex ) )
2529 0 : return new ScTableSheetObj( pDocShell, nIndex );
2530 : }
2531 0 : return NULL;
2532 : }
2533 :
2534 0 : void SAL_CALL ScTableSheetsObj::insertNewByName( const OUString& aName, sal_Int16 nPosition )
2535 : throw(uno::RuntimeException, std::exception)
2536 : {
2537 0 : SolarMutexGuard aGuard;
2538 0 : sal_Bool bDone = false;
2539 0 : if (pDocShell)
2540 : {
2541 0 : OUString aNamStr(aName);
2542 0 : bDone = pDocShell->GetDocFunc().InsertTable( nPosition, aNamStr, true, true );
2543 : }
2544 0 : if (!bDone)
2545 0 : throw uno::RuntimeException(); // no other exceptions specified
2546 0 : }
2547 :
2548 0 : void SAL_CALL ScTableSheetsObj::moveByName( const OUString& aName, sal_Int16 nDestination )
2549 : throw(uno::RuntimeException, std::exception)
2550 : {
2551 0 : SolarMutexGuard aGuard;
2552 0 : sal_Bool bDone = false;
2553 0 : if (pDocShell)
2554 : {
2555 : SCTAB nSource;
2556 0 : if ( pDocShell->GetDocument()->GetTable( aName, nSource ) )
2557 0 : bDone = pDocShell->MoveTable( nSource, nDestination, false, true );
2558 : }
2559 0 : if (!bDone)
2560 0 : throw uno::RuntimeException(); // no other exceptions specified
2561 0 : }
2562 :
2563 0 : void SAL_CALL ScTableSheetsObj::copyByName( const OUString& aName,
2564 : const OUString& aCopy, sal_Int16 nDestination )
2565 : throw(uno::RuntimeException, std::exception)
2566 : {
2567 0 : SolarMutexGuard aGuard;
2568 0 : sal_Bool bDone = false;
2569 0 : if (pDocShell)
2570 : {
2571 0 : OUString aNewStr(aCopy);
2572 : SCTAB nSource;
2573 0 : if ( pDocShell->GetDocument()->GetTable( aName, nSource ) )
2574 : {
2575 0 : bDone = pDocShell->MoveTable( nSource, nDestination, true, true );
2576 0 : if (bDone)
2577 : {
2578 : // #i92477# any index past the last sheet means "append" in MoveTable
2579 0 : SCTAB nResultTab = static_cast<SCTAB>(nDestination);
2580 0 : SCTAB nTabCount = pDocShell->GetDocument()->GetTableCount(); // count after copying
2581 0 : if (nResultTab >= nTabCount)
2582 0 : nResultTab = nTabCount - 1;
2583 :
2584 0 : bDone = pDocShell->GetDocFunc().RenameTable( nResultTab, aNewStr,
2585 0 : true, true );
2586 : }
2587 0 : }
2588 : }
2589 0 : if (!bDone)
2590 0 : throw uno::RuntimeException(); // no other exceptions specified
2591 0 : }
2592 :
2593 0 : void SAL_CALL ScTableSheetsObj::insertByName( const OUString& aName, const uno::Any& aElement )
2594 : throw(lang::IllegalArgumentException, container::ElementExistException,
2595 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2596 : {
2597 0 : SolarMutexGuard aGuard;
2598 0 : sal_Bool bDone = false;
2599 0 : sal_Bool bIllArg = false;
2600 :
2601 : //! Type of aElement can be some specific interface instead of XInterface
2602 :
2603 0 : if ( pDocShell )
2604 : {
2605 0 : uno::Reference<uno::XInterface> xInterface(aElement, uno::UNO_QUERY);
2606 0 : if ( xInterface.is() )
2607 : {
2608 0 : ScTableSheetObj* pSheetObj = ScTableSheetObj::getImplementation( xInterface );
2609 0 : if ( pSheetObj && !pSheetObj->GetDocShell() ) // noch nicht eingefuegt?
2610 : {
2611 0 : ScDocument* pDoc = pDocShell->GetDocument();
2612 0 : OUString aNamStr(aName);
2613 : SCTAB nDummy;
2614 0 : if ( pDoc->GetTable( aNamStr, nDummy ) )
2615 : {
2616 : // name already exists
2617 0 : throw container::ElementExistException();
2618 : }
2619 : else
2620 : {
2621 0 : SCTAB nPosition = pDoc->GetTableCount();
2622 0 : bDone = pDocShell->GetDocFunc().InsertTable( nPosition, aNamStr,
2623 0 : true, true );
2624 0 : if (bDone)
2625 0 : pSheetObj->InitInsertSheet( pDocShell, nPosition );
2626 : // Dokument und neuen Range am Objekt setzen
2627 0 : }
2628 : }
2629 : else
2630 0 : bIllArg = sal_True;
2631 : }
2632 : else
2633 0 : bIllArg = sal_True;
2634 : }
2635 :
2636 0 : if (!bDone)
2637 : {
2638 0 : if (bIllArg)
2639 0 : throw lang::IllegalArgumentException();
2640 : else
2641 0 : throw uno::RuntimeException(); // ElementExistException is handled above
2642 0 : }
2643 0 : }
2644 :
2645 0 : void SAL_CALL ScTableSheetsObj::replaceByName( const OUString& aName, const uno::Any& aElement )
2646 : throw(lang::IllegalArgumentException, container::NoSuchElementException,
2647 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2648 : {
2649 0 : SolarMutexGuard aGuard;
2650 0 : sal_Bool bDone = false;
2651 0 : sal_Bool bIllArg = false;
2652 :
2653 : //! Type of aElement can be some specific interface instead of XInterface
2654 :
2655 0 : if ( pDocShell )
2656 : {
2657 0 : uno::Reference<uno::XInterface> xInterface(aElement, uno::UNO_QUERY);
2658 0 : if ( xInterface.is() )
2659 : {
2660 0 : ScTableSheetObj* pSheetObj = ScTableSheetObj::getImplementation( xInterface );
2661 0 : if ( pSheetObj && !pSheetObj->GetDocShell() ) // noch nicht eingefuegt?
2662 : {
2663 : SCTAB nPosition;
2664 0 : if ( pDocShell->GetDocument()->GetTable( aName, nPosition ) )
2665 : {
2666 0 : if ( pDocShell->GetDocFunc().DeleteTable( nPosition, true, true ) )
2667 : {
2668 : // InsertTable kann jetzt eigentlich nicht schiefgehen...
2669 0 : OUString aNamStr(aName);
2670 0 : bDone = pDocShell->GetDocFunc().InsertTable( nPosition, aNamStr, true, true );
2671 0 : if (bDone)
2672 0 : pSheetObj->InitInsertSheet( pDocShell, nPosition );
2673 : }
2674 : }
2675 : else
2676 : {
2677 : // not found
2678 0 : throw container::NoSuchElementException();
2679 : }
2680 : }
2681 : else
2682 0 : bIllArg = sal_True;
2683 : }
2684 : else
2685 0 : bIllArg = sal_True;
2686 : }
2687 :
2688 0 : if (!bDone)
2689 : {
2690 0 : if (bIllArg)
2691 0 : throw lang::IllegalArgumentException();
2692 : else
2693 0 : throw uno::RuntimeException(); // NoSuchElementException is handled above
2694 0 : }
2695 0 : }
2696 :
2697 0 : void SAL_CALL ScTableSheetsObj::removeByName( const OUString& aName )
2698 : throw(container::NoSuchElementException,
2699 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2700 : {
2701 0 : SolarMutexGuard aGuard;
2702 0 : sal_Bool bDone = false;
2703 0 : if (pDocShell)
2704 : {
2705 : SCTAB nIndex;
2706 0 : if ( pDocShell->GetDocument()->GetTable( aName, nIndex ) )
2707 0 : bDone = pDocShell->GetDocFunc().DeleteTable( nIndex, true, true );
2708 : else // not found
2709 0 : throw container::NoSuchElementException();
2710 : }
2711 :
2712 0 : if (!bDone)
2713 0 : throw uno::RuntimeException(); // NoSuchElementException is handled above
2714 0 : }
2715 :
2716 0 : sal_Int32 ScTableSheetsObj::importSheet(
2717 : const uno::Reference < sheet::XSpreadsheetDocument > & xDocSrc,
2718 : const OUString& srcName, const sal_Int32 nDestPosition )
2719 : throw( lang::IllegalArgumentException, lang::IndexOutOfBoundsException, uno::RuntimeException, std::exception )
2720 : {
2721 : //pDocShell is the destination
2722 0 : ScDocument* pDocDest = pDocShell->GetDocument();
2723 :
2724 : // Source document docShell
2725 0 : if ( !xDocSrc.is() )
2726 0 : throw uno::RuntimeException();
2727 0 : ScModelObj* pObj = ScModelObj::getImplementation(xDocSrc);
2728 0 : ScDocShell* pDocShellSrc = static_cast<ScDocShell*>(pObj->GetEmbeddedObject());
2729 :
2730 : // SourceSheet Position and does srcName exists ?
2731 : SCTAB nIndexSrc;
2732 0 : if ( !pDocShellSrc->GetDocument()->GetTable( srcName, nIndexSrc ) )
2733 0 : throw lang::IllegalArgumentException();
2734 :
2735 : // Check the validity of destination index.
2736 0 : SCTAB nCount = pDocDest->GetTableCount();
2737 0 : SCTAB nIndexDest = static_cast<SCTAB>(nDestPosition);
2738 0 : if (nIndexDest > nCount || nIndexDest < 0)
2739 0 : throw lang::IndexOutOfBoundsException();
2740 :
2741 : // Transfert Tab
2742 0 : bool bInsertNew = true;
2743 0 : bool bNotifyAndPaint = true;
2744 : pDocShell->TransferTab(
2745 0 : *pDocShellSrc, nIndexSrc, nIndexDest, bInsertNew, bNotifyAndPaint );
2746 :
2747 0 : return nIndexDest;
2748 : }
2749 :
2750 : // XCellRangesAccess
2751 :
2752 0 : uno::Reference< table::XCell > SAL_CALL ScTableSheetsObj::getCellByPosition( sal_Int32 nColumn, sal_Int32 nRow, sal_Int32 nSheet )
2753 : throw (lang::IndexOutOfBoundsException, uno::RuntimeException, std::exception)
2754 : {
2755 0 : SolarMutexGuard aGuard;
2756 0 : uno::Reference<table::XCellRange> xSheet(static_cast<ScCellRangeObj*>(GetObjectByIndex_Impl((sal_uInt16)nSheet)));
2757 0 : if (! xSheet.is())
2758 0 : throw lang::IndexOutOfBoundsException();
2759 :
2760 0 : return xSheet->getCellByPosition(nColumn, nRow);
2761 : }
2762 :
2763 0 : uno::Reference< table::XCellRange > SAL_CALL ScTableSheetsObj::getCellRangeByPosition( sal_Int32 nLeft, sal_Int32 nTop, sal_Int32 nRight, sal_Int32 nBottom, sal_Int32 nSheet )
2764 : throw (lang::IndexOutOfBoundsException, uno::RuntimeException, std::exception)
2765 : {
2766 0 : SolarMutexGuard aGuard;
2767 0 : uno::Reference<table::XCellRange> xSheet(static_cast<ScCellRangeObj*>(GetObjectByIndex_Impl((sal_uInt16)nSheet)));
2768 0 : if (! xSheet.is())
2769 0 : throw lang::IndexOutOfBoundsException();
2770 :
2771 0 : return xSheet->getCellRangeByPosition(nLeft, nTop, nRight, nBottom);
2772 : }
2773 :
2774 0 : uno::Sequence < uno::Reference< table::XCellRange > > SAL_CALL ScTableSheetsObj::getCellRangesByName( const OUString& aRange )
2775 : throw (lang::IllegalArgumentException, uno::RuntimeException, std::exception)
2776 : {
2777 0 : SolarMutexGuard aGuard;
2778 0 : uno::Sequence < uno::Reference < table::XCellRange > > xRet;
2779 :
2780 0 : ScRangeList aRangeList;
2781 0 : ScDocument* pDoc = pDocShell->GetDocument();
2782 0 : if (ScRangeStringConverter::GetRangeListFromString( aRangeList, aRange, pDoc, ::formula::FormulaGrammar::CONV_OOO, ';' ))
2783 : {
2784 0 : size_t nCount = aRangeList.size();
2785 0 : if (nCount)
2786 : {
2787 0 : xRet.realloc(nCount);
2788 0 : for( size_t nIndex = 0; nIndex < nCount; nIndex++ )
2789 : {
2790 0 : const ScRange* pRange = aRangeList[ nIndex ];
2791 0 : if( pRange )
2792 0 : xRet[nIndex] = new ScCellRangeObj(pDocShell, *pRange);
2793 : }
2794 : }
2795 : else
2796 0 : throw lang::IllegalArgumentException();
2797 : }
2798 : else
2799 0 : throw lang::IllegalArgumentException();
2800 0 : return xRet;
2801 : }
2802 :
2803 : // XEnumerationAccess
2804 :
2805 0 : uno::Reference<container::XEnumeration> SAL_CALL ScTableSheetsObj::createEnumeration()
2806 : throw(uno::RuntimeException, std::exception)
2807 : {
2808 0 : SolarMutexGuard aGuard;
2809 0 : return new ScIndexEnumeration(this, OUString("com.sun.star.sheet.SpreadsheetsEnumeration"));
2810 : }
2811 :
2812 : // XIndexAccess
2813 :
2814 0 : sal_Int32 SAL_CALL ScTableSheetsObj::getCount() throw(uno::RuntimeException, std::exception)
2815 : {
2816 0 : SolarMutexGuard aGuard;
2817 0 : if (pDocShell)
2818 0 : return pDocShell->GetDocument()->GetTableCount();
2819 0 : return 0;
2820 : }
2821 :
2822 0 : uno::Any SAL_CALL ScTableSheetsObj::getByIndex( sal_Int32 nIndex )
2823 : throw(lang::IndexOutOfBoundsException,
2824 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2825 : {
2826 0 : SolarMutexGuard aGuard;
2827 0 : uno::Reference<sheet::XSpreadsheet> xSheet(GetObjectByIndex_Impl(nIndex));
2828 0 : if (xSheet.is())
2829 0 : return uno::makeAny(xSheet);
2830 : else
2831 0 : throw lang::IndexOutOfBoundsException();
2832 : // return uno::Any();
2833 : }
2834 :
2835 0 : uno::Type SAL_CALL ScTableSheetsObj::getElementType() throw(uno::RuntimeException, std::exception)
2836 : {
2837 0 : SolarMutexGuard aGuard;
2838 0 : return getCppuType((uno::Reference<sheet::XSpreadsheet>*)0);
2839 : }
2840 :
2841 0 : sal_Bool SAL_CALL ScTableSheetsObj::hasElements() throw(uno::RuntimeException, std::exception)
2842 : {
2843 0 : SolarMutexGuard aGuard;
2844 0 : return ( getCount() != 0 );
2845 : }
2846 :
2847 : // XNameAccess
2848 :
2849 0 : uno::Any SAL_CALL ScTableSheetsObj::getByName( const OUString& aName )
2850 : throw(container::NoSuchElementException,
2851 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2852 : {
2853 0 : SolarMutexGuard aGuard;
2854 0 : uno::Reference<sheet::XSpreadsheet> xSheet(GetObjectByName_Impl(aName));
2855 0 : if (xSheet.is())
2856 0 : return uno::makeAny(xSheet);
2857 : else
2858 0 : throw container::NoSuchElementException();
2859 : }
2860 :
2861 0 : uno::Sequence<OUString> SAL_CALL ScTableSheetsObj::getElementNames()
2862 : throw(uno::RuntimeException, std::exception)
2863 : {
2864 0 : SolarMutexGuard aGuard;
2865 0 : if (pDocShell)
2866 : {
2867 0 : ScDocument* pDoc = pDocShell->GetDocument();
2868 0 : SCTAB nCount = pDoc->GetTableCount();
2869 0 : OUString aName;
2870 0 : uno::Sequence<OUString> aSeq(nCount);
2871 0 : OUString* pAry = aSeq.getArray();
2872 0 : for (SCTAB i=0; i<nCount; i++)
2873 : {
2874 0 : pDoc->GetName( i, aName );
2875 0 : pAry[i] = aName;
2876 : }
2877 0 : return aSeq;
2878 : }
2879 0 : return uno::Sequence<OUString>();
2880 : }
2881 :
2882 0 : sal_Bool SAL_CALL ScTableSheetsObj::hasByName( const OUString& aName )
2883 : throw(uno::RuntimeException, std::exception)
2884 : {
2885 0 : SolarMutexGuard aGuard;
2886 0 : if (pDocShell)
2887 : {
2888 : SCTAB nIndex;
2889 0 : if ( pDocShell->GetDocument()->GetTable( aName, nIndex ) )
2890 0 : return sal_True;
2891 : }
2892 0 : return false;
2893 : }
2894 :
2895 0 : ScTableColumnsObj::ScTableColumnsObj(ScDocShell* pDocSh, SCTAB nT, SCCOL nSC, SCCOL nEC) :
2896 : pDocShell( pDocSh ),
2897 : nTab ( nT ),
2898 : nStartCol( nSC ),
2899 0 : nEndCol ( nEC )
2900 : {
2901 0 : pDocShell->GetDocument()->AddUnoObject(*this);
2902 0 : }
2903 :
2904 0 : ScTableColumnsObj::~ScTableColumnsObj()
2905 : {
2906 0 : if (pDocShell)
2907 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
2908 0 : }
2909 :
2910 0 : void ScTableColumnsObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
2911 : {
2912 0 : if ( rHint.ISA( ScUpdateRefHint ) )
2913 : {
2914 : //! Referenz-Update fuer Tab und Start/Ende
2915 : }
2916 0 : else if ( rHint.ISA( SfxSimpleHint ) &&
2917 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
2918 : {
2919 0 : pDocShell = NULL; // ungueltig geworden
2920 : }
2921 0 : }
2922 :
2923 : // XTableColumns
2924 :
2925 0 : ScTableColumnObj* ScTableColumnsObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const
2926 : {
2927 0 : SCCOL nCol = static_cast<SCCOL>(nIndex) + nStartCol;
2928 0 : if ( pDocShell && nCol <= nEndCol )
2929 0 : return new ScTableColumnObj( pDocShell, nCol, nTab );
2930 :
2931 0 : return NULL; // falscher Index
2932 : }
2933 :
2934 0 : ScTableColumnObj* ScTableColumnsObj::GetObjectByName_Impl(const OUString& aName) const
2935 : {
2936 0 : SCCOL nCol = 0;
2937 0 : OUString aString(aName);
2938 0 : if ( ::AlphaToCol( nCol, aString) )
2939 0 : if ( pDocShell && nCol >= nStartCol && nCol <= nEndCol )
2940 0 : return new ScTableColumnObj( pDocShell, nCol, nTab );
2941 :
2942 0 : return NULL;
2943 : }
2944 :
2945 0 : void SAL_CALL ScTableColumnsObj::insertByIndex( sal_Int32 nPosition, sal_Int32 nCount )
2946 : throw(uno::RuntimeException, std::exception)
2947 : {
2948 0 : SolarMutexGuard aGuard;
2949 0 : sal_Bool bDone = false;
2950 0 : if ( pDocShell && nCount > 0 && nPosition >= 0 && nStartCol+nPosition <= nEndCol &&
2951 0 : nStartCol+nPosition+nCount-1 <= MAXCOL )
2952 : {
2953 : ScRange aRange( (SCCOL)(nStartCol+nPosition), 0, nTab,
2954 0 : (SCCOL)(nStartCol+nPosition+nCount-1), MAXROW, nTab );
2955 0 : bDone = pDocShell->GetDocFunc().InsertCells( aRange, NULL, INS_INSCOLS, true, true );
2956 : }
2957 0 : if (!bDone)
2958 0 : throw uno::RuntimeException(); // no other exceptions specified
2959 0 : }
2960 :
2961 0 : void SAL_CALL ScTableColumnsObj::removeByIndex( sal_Int32 nIndex, sal_Int32 nCount )
2962 : throw(uno::RuntimeException, std::exception)
2963 : {
2964 0 : SolarMutexGuard aGuard;
2965 0 : sal_Bool bDone = false;
2966 : // Der zu loeschende Bereich muss innerhalb des Objekts liegen
2967 0 : if ( pDocShell && nCount > 0 && nIndex >= 0 && nStartCol+nIndex+nCount-1 <= nEndCol )
2968 : {
2969 : ScRange aRange( (SCCOL)(nStartCol+nIndex), 0, nTab,
2970 0 : (SCCOL)(nStartCol+nIndex+nCount-1), MAXROW, nTab );
2971 0 : bDone = pDocShell->GetDocFunc().DeleteCells( aRange, NULL, DEL_DELCOLS, true, true );
2972 : }
2973 0 : if (!bDone)
2974 0 : throw uno::RuntimeException(); // no other exceptions specified
2975 0 : }
2976 :
2977 : // XEnumerationAccess
2978 :
2979 0 : uno::Reference<container::XEnumeration> SAL_CALL ScTableColumnsObj::createEnumeration()
2980 : throw(uno::RuntimeException, std::exception)
2981 : {
2982 0 : SolarMutexGuard aGuard;
2983 0 : return new ScIndexEnumeration(this, OUString("com.sun.star.table.TableColumnsEnumeration"));
2984 : }
2985 :
2986 : // XIndexAccess
2987 :
2988 0 : sal_Int32 SAL_CALL ScTableColumnsObj::getCount() throw(uno::RuntimeException, std::exception)
2989 : {
2990 0 : SolarMutexGuard aGuard;
2991 0 : return nEndCol - nStartCol + 1;
2992 : }
2993 :
2994 0 : uno::Any SAL_CALL ScTableColumnsObj::getByIndex( sal_Int32 nIndex )
2995 : throw(lang::IndexOutOfBoundsException,
2996 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
2997 : {
2998 0 : SolarMutexGuard aGuard;
2999 0 : uno::Reference<table::XCellRange> xColumn(GetObjectByIndex_Impl(nIndex));
3000 0 : if (xColumn.is())
3001 0 : return uno::makeAny(xColumn);
3002 : else
3003 0 : throw lang::IndexOutOfBoundsException();
3004 : }
3005 :
3006 0 : uno::Type SAL_CALL ScTableColumnsObj::getElementType() throw(uno::RuntimeException, std::exception)
3007 : {
3008 0 : SolarMutexGuard aGuard;
3009 0 : return getCppuType((uno::Reference<table::XCellRange>*)0);
3010 : }
3011 :
3012 0 : sal_Bool SAL_CALL ScTableColumnsObj::hasElements() throw(uno::RuntimeException, std::exception)
3013 : {
3014 0 : SolarMutexGuard aGuard;
3015 0 : return ( getCount() != 0 );
3016 : }
3017 :
3018 0 : uno::Any SAL_CALL ScTableColumnsObj::getByName( const OUString& aName )
3019 : throw(container::NoSuchElementException,
3020 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
3021 : {
3022 0 : SolarMutexGuard aGuard;
3023 0 : uno::Reference<table::XCellRange> xColumn(GetObjectByName_Impl(aName));
3024 0 : if (xColumn.is())
3025 0 : return uno::makeAny(xColumn);
3026 : else
3027 0 : throw container::NoSuchElementException();
3028 : }
3029 :
3030 0 : uno::Sequence<OUString> SAL_CALL ScTableColumnsObj::getElementNames()
3031 : throw(uno::RuntimeException, std::exception)
3032 : {
3033 0 : SolarMutexGuard aGuard;
3034 0 : SCCOL nCount = nEndCol - nStartCol + 1;
3035 0 : uno::Sequence<OUString> aSeq(nCount);
3036 0 : OUString* pAry = aSeq.getArray();
3037 0 : for (SCCOL i=0; i<nCount; i++)
3038 0 : pAry[i] = ::ScColToAlpha( nStartCol + i );
3039 :
3040 0 : return aSeq;
3041 : }
3042 :
3043 0 : sal_Bool SAL_CALL ScTableColumnsObj::hasByName( const OUString& aName )
3044 : throw(uno::RuntimeException, std::exception)
3045 : {
3046 0 : SolarMutexGuard aGuard;
3047 0 : SCCOL nCol = 0;
3048 0 : OUString aString(aName);
3049 0 : if ( ::AlphaToCol( nCol, aString) )
3050 0 : if ( pDocShell && nCol >= nStartCol && nCol <= nEndCol )
3051 0 : return sal_True;
3052 :
3053 0 : return false; // nicht gefunden
3054 : }
3055 :
3056 : // XPropertySet
3057 :
3058 0 : uno::Reference<beans::XPropertySetInfo> SAL_CALL ScTableColumnsObj::getPropertySetInfo()
3059 : throw(uno::RuntimeException, std::exception)
3060 : {
3061 0 : SolarMutexGuard aGuard;
3062 : static uno::Reference<beans::XPropertySetInfo> aRef(
3063 0 : new SfxItemPropertySetInfo( lcl_GetColumnsPropertyMap() ));
3064 0 : return aRef;
3065 : }
3066 :
3067 0 : void SAL_CALL ScTableColumnsObj::setPropertyValue(
3068 : const OUString& aPropertyName, const uno::Any& aValue )
3069 : throw(beans::UnknownPropertyException, beans::PropertyVetoException,
3070 : lang::IllegalArgumentException, lang::WrappedTargetException,
3071 : uno::RuntimeException, std::exception)
3072 : {
3073 0 : SolarMutexGuard aGuard;
3074 0 : if (!pDocShell)
3075 0 : throw uno::RuntimeException();
3076 :
3077 0 : std::vector<sc::ColRowSpan> aColArr(1, sc::ColRowSpan(nStartCol,nEndCol));
3078 0 : OUString aNameString(aPropertyName);
3079 0 : ScDocFunc& rFunc = pDocShell->GetDocFunc();
3080 :
3081 0 : if ( aNameString.equalsAscii( SC_UNONAME_CELLWID ) )
3082 : {
3083 0 : sal_Int32 nNewWidth = 0;
3084 0 : if ( aValue >>= nNewWidth )
3085 : rFunc.SetWidthOrHeight(
3086 0 : true, aColArr, nTab, SC_SIZE_ORIGINAL, (sal_uInt16)HMMToTwips(nNewWidth), true, true);
3087 : }
3088 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLVIS ) )
3089 : {
3090 0 : sal_Bool bVis = ScUnoHelpFunctions::GetBoolFromAny( aValue );
3091 0 : ScSizeMode eMode = bVis ? SC_SIZE_SHOW : SC_SIZE_DIRECT;
3092 0 : rFunc.SetWidthOrHeight(true, aColArr, nTab, eMode, 0, true, true);
3093 : // SC_SIZE_DIRECT with size 0: hide
3094 : }
3095 0 : else if ( aNameString.equalsAscii( SC_UNONAME_OWIDTH ) )
3096 : {
3097 0 : sal_Bool bOpt = ScUnoHelpFunctions::GetBoolFromAny( aValue );
3098 0 : if (bOpt)
3099 : rFunc.SetWidthOrHeight(
3100 0 : true, aColArr, nTab, SC_SIZE_OPTIMAL, STD_EXTRA_WIDTH, true, true);
3101 : // sal_False for columns currently has no effect
3102 : }
3103 0 : else if ( aNameString.equalsAscii( SC_UNONAME_NEWPAGE ) || aNameString.equalsAscii( SC_UNONAME_MANPAGE ) )
3104 : {
3105 : //! single function to set/remove all breaks?
3106 0 : sal_Bool bSet = ScUnoHelpFunctions::GetBoolFromAny( aValue );
3107 0 : for (SCCOL nCol=nStartCol; nCol<=nEndCol; nCol++)
3108 0 : if (bSet)
3109 0 : rFunc.InsertPageBreak( true, ScAddress(nCol,0,nTab), true, true, true );
3110 : else
3111 0 : rFunc.RemovePageBreak( true, ScAddress(nCol,0,nTab), true, true, true );
3112 0 : }
3113 0 : }
3114 :
3115 0 : uno::Any SAL_CALL ScTableColumnsObj::getPropertyValue( const OUString& aPropertyName )
3116 : throw(beans::UnknownPropertyException, lang::WrappedTargetException,
3117 : uno::RuntimeException, std::exception)
3118 : {
3119 0 : SolarMutexGuard aGuard;
3120 0 : if (!pDocShell)
3121 0 : throw uno::RuntimeException();
3122 :
3123 0 : ScDocument* pDoc = pDocShell->GetDocument();
3124 0 : OUString aNameString(aPropertyName);
3125 0 : uno::Any aAny;
3126 :
3127 : //! loop over all columns for current state?
3128 :
3129 0 : if ( aNameString.equalsAscii( SC_UNONAME_CELLWID ) )
3130 : {
3131 : // for hidden column, return original height
3132 0 : sal_uInt16 nWidth = pDoc->GetOriginalWidth( nStartCol, nTab );
3133 0 : aAny <<= (sal_Int32)TwipsToHMM(nWidth);
3134 : }
3135 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLVIS ) )
3136 : {
3137 0 : bool bVis = !pDoc->ColHidden(nStartCol, nTab);
3138 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, bVis );
3139 : }
3140 0 : else if ( aNameString.equalsAscii( SC_UNONAME_OWIDTH ) )
3141 : {
3142 0 : sal_Bool bOpt = !(pDoc->GetColFlags( nStartCol, nTab ) & CR_MANUALSIZE);
3143 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, bOpt );
3144 : }
3145 0 : else if ( aNameString.equalsAscii( SC_UNONAME_NEWPAGE ) )
3146 : {
3147 0 : ScBreakType nBreak = pDoc->HasColBreak(nStartCol, nTab);
3148 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, nBreak );
3149 : }
3150 0 : else if ( aNameString.equalsAscii( SC_UNONAME_MANPAGE ) )
3151 : {
3152 0 : ScBreakType nBreak = pDoc->HasColBreak(nStartCol, nTab);
3153 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, (nBreak & BREAK_MANUAL) != 0 );
3154 : }
3155 :
3156 0 : return aAny;
3157 : }
3158 :
3159 0 : SC_IMPL_DUMMY_PROPERTY_LISTENER( ScTableColumnsObj )
3160 :
3161 0 : ScTableRowsObj::ScTableRowsObj(ScDocShell* pDocSh, SCTAB nT, SCROW nSR, SCROW nER) :
3162 : pDocShell( pDocSh ),
3163 : nTab ( nT ),
3164 : nStartRow( nSR ),
3165 0 : nEndRow ( nER )
3166 : {
3167 0 : pDocShell->GetDocument()->AddUnoObject(*this);
3168 0 : }
3169 :
3170 0 : ScTableRowsObj::~ScTableRowsObj()
3171 : {
3172 0 : if (pDocShell)
3173 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
3174 0 : }
3175 :
3176 0 : void ScTableRowsObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
3177 : {
3178 0 : if ( rHint.ISA( ScUpdateRefHint ) )
3179 : {
3180 : //! Referenz-Update fuer Tab und Start/Ende
3181 : }
3182 0 : else if ( rHint.ISA( SfxSimpleHint ) &&
3183 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
3184 : {
3185 0 : pDocShell = NULL; // ungueltig geworden
3186 : }
3187 0 : }
3188 :
3189 : // XTableRows
3190 :
3191 0 : ScTableRowObj* ScTableRowsObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const
3192 : {
3193 0 : SCROW nRow = static_cast<SCROW>(nIndex) + nStartRow;
3194 0 : if ( pDocShell && nRow <= nEndRow )
3195 0 : return new ScTableRowObj( pDocShell, nRow, nTab );
3196 :
3197 0 : return NULL; // falscher Index
3198 : }
3199 :
3200 0 : void SAL_CALL ScTableRowsObj::insertByIndex( sal_Int32 nPosition, sal_Int32 nCount )
3201 : throw(uno::RuntimeException, std::exception)
3202 : {
3203 0 : SolarMutexGuard aGuard;
3204 0 : sal_Bool bDone = false;
3205 0 : if ( pDocShell && nCount > 0 && nPosition >= 0 && nStartRow+nPosition <= nEndRow &&
3206 0 : nStartRow+nPosition+nCount-1 <= MAXROW )
3207 : {
3208 : ScRange aRange( 0, (SCROW)(nStartRow+nPosition), nTab,
3209 0 : MAXCOL, (SCROW)(nStartRow+nPosition+nCount-1), nTab );
3210 0 : bDone = pDocShell->GetDocFunc().InsertCells( aRange, NULL, INS_INSROWS, true, true );
3211 : }
3212 0 : if (!bDone)
3213 0 : throw uno::RuntimeException(); // no other exceptions specified
3214 0 : }
3215 :
3216 0 : void SAL_CALL ScTableRowsObj::removeByIndex( sal_Int32 nIndex, sal_Int32 nCount )
3217 : throw(uno::RuntimeException, std::exception)
3218 : {
3219 0 : SolarMutexGuard aGuard;
3220 0 : sal_Bool bDone = false;
3221 : // Der zu loeschende Bereich muss innerhalb des Objekts liegen
3222 0 : if ( pDocShell && nCount > 0 && nIndex >= 0 && nStartRow+nIndex+nCount-1 <= nEndRow )
3223 : {
3224 : ScRange aRange( 0, (SCROW)(nStartRow+nIndex), nTab,
3225 0 : MAXCOL, (SCROW)(nStartRow+nIndex+nCount-1), nTab );
3226 0 : bDone = pDocShell->GetDocFunc().DeleteCells( aRange, NULL, DEL_DELROWS, true, true );
3227 : }
3228 0 : if (!bDone)
3229 0 : throw uno::RuntimeException(); // no other exceptions specified
3230 0 : }
3231 :
3232 : // XEnumerationAccess
3233 :
3234 0 : uno::Reference<container::XEnumeration> SAL_CALL ScTableRowsObj::createEnumeration()
3235 : throw(uno::RuntimeException, std::exception)
3236 : {
3237 0 : SolarMutexGuard aGuard;
3238 0 : return new ScIndexEnumeration(this, OUString("com.sun.star.table.TableRowsEnumeration"));
3239 : }
3240 :
3241 : // XIndexAccess
3242 :
3243 0 : sal_Int32 SAL_CALL ScTableRowsObj::getCount() throw(uno::RuntimeException, std::exception)
3244 : {
3245 0 : SolarMutexGuard aGuard;
3246 0 : return nEndRow - nStartRow + 1;
3247 : }
3248 :
3249 0 : uno::Any SAL_CALL ScTableRowsObj::getByIndex( sal_Int32 nIndex )
3250 : throw(lang::IndexOutOfBoundsException,
3251 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
3252 : {
3253 0 : SolarMutexGuard aGuard;
3254 0 : uno::Reference<table::XCellRange> xRow(GetObjectByIndex_Impl(nIndex));
3255 0 : if (xRow.is())
3256 0 : return uno::makeAny(xRow);
3257 : else
3258 0 : throw lang::IndexOutOfBoundsException();
3259 : }
3260 :
3261 0 : uno::Type SAL_CALL ScTableRowsObj::getElementType() throw(uno::RuntimeException, std::exception)
3262 : {
3263 0 : SolarMutexGuard aGuard;
3264 0 : return getCppuType((uno::Reference<table::XCellRange>*)0);
3265 : }
3266 :
3267 0 : sal_Bool SAL_CALL ScTableRowsObj::hasElements() throw(uno::RuntimeException, std::exception)
3268 : {
3269 0 : SolarMutexGuard aGuard;
3270 0 : return ( getCount() != 0 );
3271 : }
3272 :
3273 : // XPropertySet
3274 :
3275 0 : uno::Reference<beans::XPropertySetInfo> SAL_CALL ScTableRowsObj::getPropertySetInfo()
3276 : throw(uno::RuntimeException, std::exception)
3277 : {
3278 0 : SolarMutexGuard aGuard;
3279 : static uno::Reference<beans::XPropertySetInfo> aRef(
3280 0 : new SfxItemPropertySetInfo( lcl_GetRowsPropertyMap() ));
3281 0 : return aRef;
3282 : }
3283 :
3284 0 : void SAL_CALL ScTableRowsObj::setPropertyValue(
3285 : const OUString& aPropertyName, const uno::Any& aValue )
3286 : throw(beans::UnknownPropertyException, beans::PropertyVetoException,
3287 : lang::IllegalArgumentException, lang::WrappedTargetException,
3288 : uno::RuntimeException, std::exception)
3289 : {
3290 0 : SolarMutexGuard aGuard;
3291 0 : if (!pDocShell)
3292 0 : throw uno::RuntimeException();
3293 :
3294 0 : ScDocFunc& rFunc = pDocShell->GetDocFunc();
3295 0 : ScDocument* pDoc = pDocShell->GetDocument();
3296 0 : std::vector<sc::ColRowSpan> aRowArr(1, sc::ColRowSpan(nStartRow,nEndRow));
3297 0 : OUString aNameString(aPropertyName);
3298 :
3299 0 : if ( aNameString.equalsAscii( SC_UNONAME_OHEIGHT ) )
3300 : {
3301 0 : sal_Int32 nNewHeight = 0;
3302 0 : if ( pDoc->IsImportingXML() && ( aValue >>= nNewHeight ) )
3303 : {
3304 : // used to set the stored row height for rows with optimal height when loading.
3305 :
3306 : // TODO: It's probably cleaner to use a different property name
3307 : // for this.
3308 0 : pDoc->SetRowHeightOnly( nStartRow, nEndRow, nTab, (sal_uInt16)HMMToTwips(nNewHeight) );
3309 : }
3310 : else
3311 : {
3312 0 : sal_Bool bOpt = ScUnoHelpFunctions::GetBoolFromAny( aValue );
3313 0 : if (bOpt)
3314 0 : rFunc.SetWidthOrHeight(false, aRowArr, nTab, SC_SIZE_OPTIMAL, 0, true, true);
3315 : else
3316 : {
3317 : //! manually set old heights again?
3318 : }
3319 : }
3320 : }
3321 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLHGT ) )
3322 : {
3323 0 : sal_Int32 nNewHeight = 0;
3324 0 : if ( aValue >>= nNewHeight )
3325 : {
3326 0 : if (pDoc->IsImportingXML())
3327 : {
3328 : // TODO: This is a band-aid fix. Eventually we need to
3329 : // re-work ods' style import to get it to set styles to
3330 : // ScDocument directly.
3331 0 : pDoc->SetRowHeightOnly( nStartRow, nEndRow, nTab, (sal_uInt16)HMMToTwips(nNewHeight) );
3332 0 : pDoc->SetManualHeight( nStartRow, nEndRow, nTab, true );
3333 : }
3334 : else
3335 : rFunc.SetWidthOrHeight(
3336 0 : false, aRowArr, nTab, SC_SIZE_ORIGINAL, (sal_uInt16)HMMToTwips(nNewHeight), true, true);
3337 : }
3338 : }
3339 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLVIS ) )
3340 : {
3341 0 : sal_Bool bVis = ScUnoHelpFunctions::GetBoolFromAny( aValue );
3342 0 : ScSizeMode eMode = bVis ? SC_SIZE_SHOW : SC_SIZE_DIRECT;
3343 0 : rFunc.SetWidthOrHeight(false, aRowArr, nTab, eMode, 0, true, true);
3344 : // SC_SIZE_DIRECT with size 0: hide
3345 : }
3346 0 : else if ( aNameString.equalsAscii( SC_UNONAME_VISFLAG ) )
3347 : {
3348 : // #i116460# Shortcut to only set the flag, without drawing layer update etc.
3349 : // Should only be used from import filters.
3350 0 : pDoc->SetRowHidden(nStartRow, nEndRow, nTab, !ScUnoHelpFunctions::GetBoolFromAny( aValue ));
3351 : }
3352 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLFILT ) )
3353 : {
3354 : //! undo etc.
3355 0 : if (ScUnoHelpFunctions::GetBoolFromAny( aValue ))
3356 0 : pDoc->SetRowFiltered(nStartRow, nEndRow, nTab, true);
3357 : else
3358 0 : pDoc->SetRowFiltered(nStartRow, nEndRow, nTab, false);
3359 : }
3360 0 : else if ( aNameString.equalsAscii( SC_UNONAME_NEWPAGE) || aNameString.equalsAscii( SC_UNONAME_MANPAGE) )
3361 : {
3362 : //! single function to set/remove all breaks?
3363 0 : sal_Bool bSet = ScUnoHelpFunctions::GetBoolFromAny( aValue );
3364 0 : for (SCROW nRow=nStartRow; nRow<=nEndRow; nRow++)
3365 0 : if (bSet)
3366 0 : rFunc.InsertPageBreak( false, ScAddress(0,nRow,nTab), true, true, true );
3367 : else
3368 0 : rFunc.RemovePageBreak( false, ScAddress(0,nRow,nTab), true, true, true );
3369 : }
3370 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLBACK ) || aNameString.equalsAscii( SC_UNONAME_CELLTRAN ) )
3371 : {
3372 : // #i57867# Background color is specified for row styles in the file format,
3373 : // so it has to be supported along with the row properties (import only).
3374 :
3375 : // Use ScCellRangeObj to set the property for all cells in the rows
3376 : // (this means, the "row attribute" must be set before individual cell attributes).
3377 :
3378 0 : ScRange aRange( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab );
3379 0 : uno::Reference<beans::XPropertySet> xRangeObj = new ScCellRangeObj( pDocShell, aRange );
3380 0 : xRangeObj->setPropertyValue( aPropertyName, aValue );
3381 0 : }
3382 0 : }
3383 :
3384 0 : uno::Any SAL_CALL ScTableRowsObj::getPropertyValue( const OUString& aPropertyName )
3385 : throw(beans::UnknownPropertyException, lang::WrappedTargetException,
3386 : uno::RuntimeException, std::exception)
3387 : {
3388 0 : SolarMutexGuard aGuard;
3389 0 : if (!pDocShell)
3390 0 : throw uno::RuntimeException();
3391 :
3392 0 : ScDocument* pDoc = pDocShell->GetDocument();
3393 0 : OUString aNameString(aPropertyName);
3394 0 : uno::Any aAny;
3395 :
3396 : //! loop over all rows for current state?
3397 :
3398 0 : if ( aNameString.equalsAscii( SC_UNONAME_CELLHGT ) )
3399 : {
3400 : // for hidden row, return original height
3401 0 : sal_uInt16 nHeight = pDoc->GetOriginalHeight( nStartRow, nTab );
3402 0 : aAny <<= (sal_Int32)TwipsToHMM(nHeight);
3403 : }
3404 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLVIS ) )
3405 : {
3406 : SCROW nLastRow;
3407 0 : bool bVis = !pDoc->RowHidden(nStartRow, nTab, NULL, &nLastRow);
3408 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, bVis );
3409 : }
3410 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLFILT ) )
3411 : {
3412 0 : bool bVis = pDoc->RowFiltered(nStartRow, nTab);
3413 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, bVis );
3414 : }
3415 0 : else if ( aNameString.equalsAscii( SC_UNONAME_OHEIGHT ) )
3416 : {
3417 0 : sal_Bool bOpt = !(pDoc->GetRowFlags( nStartRow, nTab ) & CR_MANUALSIZE);
3418 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, bOpt );
3419 : }
3420 0 : else if ( aNameString.equalsAscii( SC_UNONAME_NEWPAGE ) )
3421 : {
3422 0 : ScBreakType nBreak = pDoc->HasRowBreak(nStartRow, nTab);
3423 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, nBreak );
3424 : }
3425 0 : else if ( aNameString.equalsAscii( SC_UNONAME_MANPAGE ) )
3426 : {
3427 0 : ScBreakType nBreak = pDoc->HasRowBreak(nStartRow, nTab);
3428 0 : ScUnoHelpFunctions::SetBoolInAny( aAny, (nBreak & BREAK_MANUAL) != 0 );
3429 : }
3430 0 : else if ( aNameString.equalsAscii( SC_UNONAME_CELLBACK ) || aNameString.equalsAscii( SC_UNONAME_CELLTRAN ) )
3431 : {
3432 : // Use ScCellRangeObj to get the property from the cell range
3433 : // (for completeness only, this is not used by the XML filter).
3434 :
3435 0 : ScRange aRange( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab );
3436 0 : uno::Reference<beans::XPropertySet> xRangeObj = new ScCellRangeObj( pDocShell, aRange );
3437 0 : aAny = xRangeObj->getPropertyValue( aPropertyName );
3438 : }
3439 :
3440 0 : return aAny;
3441 : }
3442 :
3443 0 : SC_IMPL_DUMMY_PROPERTY_LISTENER( ScTableRowsObj )
3444 :
3445 0 : ScSpreadsheetSettingsObj::~ScSpreadsheetSettingsObj()
3446 : {
3447 0 : if (pDocShell)
3448 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
3449 0 : }
3450 :
3451 0 : void ScSpreadsheetSettingsObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
3452 : {
3453 : // Referenz-Update interessiert hier nicht
3454 :
3455 0 : if ( rHint.ISA( SfxSimpleHint ) &&
3456 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
3457 : {
3458 0 : pDocShell = NULL; // ungueltig geworden
3459 : }
3460 0 : }
3461 :
3462 : // XPropertySet
3463 :
3464 0 : uno::Reference<beans::XPropertySetInfo> SAL_CALL ScSpreadsheetSettingsObj::getPropertySetInfo()
3465 : throw(uno::RuntimeException, std::exception)
3466 : {
3467 : //! muss noch
3468 0 : return NULL;
3469 : }
3470 :
3471 0 : void SAL_CALL ScSpreadsheetSettingsObj::setPropertyValue(
3472 : const OUString& /* aPropertyName */, const uno::Any& /* aValue */ )
3473 : throw(beans::UnknownPropertyException, beans::PropertyVetoException,
3474 : lang::IllegalArgumentException, lang::WrappedTargetException,
3475 : uno::RuntimeException, std::exception)
3476 : {
3477 : //! muss noch
3478 0 : }
3479 :
3480 0 : uno::Any SAL_CALL ScSpreadsheetSettingsObj::getPropertyValue( const OUString& /* aPropertyName */ )
3481 : throw(beans::UnknownPropertyException, lang::WrappedTargetException,
3482 : uno::RuntimeException, std::exception)
3483 : {
3484 : //! muss noch
3485 0 : return uno::Any();
3486 : }
3487 :
3488 0 : SC_IMPL_DUMMY_PROPERTY_LISTENER( ScSpreadsheetSettingsObj )
3489 :
3490 0 : ScAnnotationsObj::ScAnnotationsObj(ScDocShell* pDocSh, SCTAB nT) :
3491 : pDocShell( pDocSh ),
3492 0 : nTab( nT )
3493 : {
3494 0 : pDocShell->GetDocument()->AddUnoObject(*this);
3495 0 : }
3496 :
3497 0 : ScAnnotationsObj::~ScAnnotationsObj()
3498 : {
3499 0 : if (pDocShell)
3500 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
3501 0 : }
3502 :
3503 0 : void ScAnnotationsObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
3504 : {
3505 : //! nTab bei Referenz-Update anpassen!!!
3506 :
3507 0 : if ( rHint.ISA( SfxSimpleHint ) &&
3508 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
3509 : {
3510 0 : pDocShell = NULL; // ungueltig geworden
3511 : }
3512 0 : }
3513 :
3514 0 : bool ScAnnotationsObj::GetAddressByIndex_Impl( sal_Int32 nIndex, ScAddress& rPos ) const
3515 : {
3516 0 : if (!pDocShell)
3517 0 : return false;
3518 :
3519 0 : ScDocument* pDoc = pDocShell->GetDocument();
3520 0 : rPos = pDoc->GetNotePosition(nIndex);
3521 0 : return rPos.IsValid();
3522 : }
3523 :
3524 0 : ScAnnotationObj* ScAnnotationsObj::GetObjectByIndex_Impl( sal_Int32 nIndex ) const
3525 : {
3526 0 : if (pDocShell)
3527 : {
3528 0 : ScAddress aPos;
3529 0 : if ( GetAddressByIndex_Impl( nIndex, aPos ) )
3530 0 : return new ScAnnotationObj( pDocShell, aPos );
3531 : }
3532 0 : return NULL;
3533 : }
3534 :
3535 : // XSheetAnnotations
3536 :
3537 0 : void SAL_CALL ScAnnotationsObj::insertNew(
3538 : const table::CellAddress& aPosition, const OUString& rText )
3539 : throw(uno::RuntimeException, std::exception)
3540 : {
3541 0 : SolarMutexGuard aGuard;
3542 0 : if (pDocShell)
3543 : {
3544 : OSL_ENSURE( aPosition.Sheet == nTab, "addAnnotation mit falschem Sheet" );
3545 0 : ScAddress aPos( (SCCOL)aPosition.Column, (SCROW)aPosition.Row, nTab );
3546 0 : pDocShell->GetDocFunc().ReplaceNote( aPos, rText, 0, 0, true );
3547 0 : }
3548 0 : }
3549 :
3550 0 : void SAL_CALL ScAnnotationsObj::removeByIndex( sal_Int32 nIndex ) throw(uno::RuntimeException, std::exception)
3551 : {
3552 0 : SolarMutexGuard aGuard;
3553 0 : if (pDocShell)
3554 : {
3555 0 : ScAddress aPos;
3556 0 : if ( GetAddressByIndex_Impl( nIndex, aPos ) )
3557 : {
3558 0 : ScMarkData aMarkData;
3559 0 : aMarkData.SelectTable( aPos.Tab(), true );
3560 0 : aMarkData.SetMultiMarkArea( ScRange(aPos) );
3561 :
3562 0 : pDocShell->GetDocFunc().DeleteContents( aMarkData, IDF_NOTE, true, true );
3563 : }
3564 0 : }
3565 0 : }
3566 :
3567 : // XEnumerationAccess
3568 :
3569 0 : uno::Reference<container::XEnumeration> SAL_CALL ScAnnotationsObj::createEnumeration()
3570 : throw(uno::RuntimeException, std::exception)
3571 : {
3572 : //! iterate directly (more efficiently)?
3573 :
3574 0 : SolarMutexGuard aGuard;
3575 0 : return new ScIndexEnumeration(this, OUString("com.sun.star.sheet.CellAnnotationsEnumeration"));
3576 : }
3577 :
3578 : // XIndexAccess
3579 :
3580 0 : sal_Int32 SAL_CALL ScAnnotationsObj::getCount()
3581 : throw(uno::RuntimeException, std::exception)
3582 : {
3583 0 : SolarMutexGuard aGuard;
3584 0 : sal_Int32 nCount = 0;
3585 0 : if (pDocShell)
3586 : {
3587 0 : ScDocument* pDoc = pDocShell->GetDocument();
3588 0 : const ScRangeList aRangeList( ScRange( 0, 0, nTab, MAXCOL, MAXROW, nTab) );
3589 0 : std::vector<sc::NoteEntry> rNotes;
3590 0 : pDoc->GetNotesInRange(aRangeList, rNotes);
3591 0 : nCount = rNotes.size();
3592 : }
3593 0 : return nCount;
3594 : }
3595 :
3596 0 : uno::Any SAL_CALL ScAnnotationsObj::getByIndex( sal_Int32 nIndex )
3597 : throw(lang::IndexOutOfBoundsException,
3598 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
3599 : {
3600 0 : SolarMutexGuard aGuard;
3601 0 : uno::Reference<sheet::XSheetAnnotation> xAnnotation(GetObjectByIndex_Impl(nIndex));
3602 0 : if (xAnnotation.is())
3603 0 : return uno::makeAny(xAnnotation);
3604 : else
3605 0 : throw lang::IndexOutOfBoundsException();
3606 : }
3607 :
3608 0 : uno::Type SAL_CALL ScAnnotationsObj::getElementType() throw(uno::RuntimeException, std::exception)
3609 : {
3610 0 : SolarMutexGuard aGuard;
3611 0 : return getCppuType((uno::Reference<sheet::XSheetAnnotation>*)0);
3612 : }
3613 :
3614 0 : sal_Bool SAL_CALL ScAnnotationsObj::hasElements() throw(uno::RuntimeException, std::exception)
3615 : {
3616 0 : SolarMutexGuard aGuard;
3617 0 : return ( getCount() != 0 );
3618 : }
3619 :
3620 0 : ScScenariosObj::ScScenariosObj(ScDocShell* pDocSh, SCTAB nT) :
3621 : pDocShell( pDocSh ),
3622 0 : nTab ( nT )
3623 : {
3624 0 : pDocShell->GetDocument()->AddUnoObject(*this);
3625 0 : }
3626 :
3627 0 : ScScenariosObj::~ScScenariosObj()
3628 : {
3629 0 : if (pDocShell)
3630 0 : pDocShell->GetDocument()->RemoveUnoObject(*this);
3631 0 : }
3632 :
3633 0 : void ScScenariosObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
3634 : {
3635 0 : if ( rHint.ISA( ScUpdateRefHint ) )
3636 : {
3637 : //! Referenz-Update fuer Tab und Start/Ende
3638 : }
3639 0 : else if ( rHint.ISA( SfxSimpleHint ) &&
3640 0 : ((const SfxSimpleHint&)rHint).GetId() == SFX_HINT_DYING )
3641 : {
3642 0 : pDocShell = NULL; // ungueltig geworden
3643 : }
3644 0 : }
3645 :
3646 : // XScenarios
3647 :
3648 0 : bool ScScenariosObj::GetScenarioIndex_Impl( const OUString& rName, SCTAB& rIndex )
3649 : {
3650 : //! Case-insensitiv ????
3651 :
3652 0 : if ( pDocShell )
3653 : {
3654 0 : OUString aTabName;
3655 0 : ScDocument* pDoc = pDocShell->GetDocument();
3656 0 : SCTAB nCount = (SCTAB)getCount();
3657 0 : for (SCTAB i=0; i<nCount; i++)
3658 0 : if (pDoc->GetName( nTab+i+1, aTabName ))
3659 0 : if (aTabName.equals(rName))
3660 : {
3661 0 : rIndex = i;
3662 0 : return true;
3663 0 : }
3664 : }
3665 :
3666 0 : return false;
3667 : }
3668 :
3669 0 : ScTableSheetObj* ScScenariosObj::GetObjectByIndex_Impl(sal_Int32 nIndex)
3670 : {
3671 0 : sal_uInt16 nCount = (sal_uInt16)getCount();
3672 0 : if ( pDocShell && nIndex >= 0 && nIndex < nCount )
3673 0 : return new ScTableSheetObj( pDocShell, nTab+static_cast<SCTAB>(nIndex)+1 );
3674 :
3675 0 : return NULL; // kein Dokument oder falscher Index
3676 : }
3677 :
3678 0 : ScTableSheetObj* ScScenariosObj::GetObjectByName_Impl(const OUString& aName)
3679 : {
3680 : SCTAB nIndex;
3681 0 : if ( pDocShell && GetScenarioIndex_Impl( aName, nIndex ) )
3682 0 : return new ScTableSheetObj( pDocShell, nTab+nIndex+1 );
3683 :
3684 0 : return NULL; // nicht gefunden
3685 : }
3686 :
3687 0 : void SAL_CALL ScScenariosObj::addNewByName( const OUString& aName,
3688 : const uno::Sequence<table::CellRangeAddress>& aRanges,
3689 : const OUString& aComment )
3690 : throw(uno::RuntimeException, std::exception)
3691 : {
3692 0 : SolarMutexGuard aGuard;
3693 0 : if ( pDocShell )
3694 : {
3695 0 : ScMarkData aMarkData;
3696 0 : aMarkData.SelectTable( nTab, true );
3697 :
3698 0 : sal_uInt16 nRangeCount = (sal_uInt16)aRanges.getLength();
3699 0 : if (nRangeCount)
3700 : {
3701 0 : const table::CellRangeAddress* pAry = aRanges.getConstArray();
3702 0 : for (sal_uInt16 i=0; i<nRangeCount; i++)
3703 : {
3704 : OSL_ENSURE( pAry[i].Sheet == nTab, "addScenario mit falscher Tab" );
3705 0 : ScRange aRange( (SCCOL)pAry[i].StartColumn, (SCROW)pAry[i].StartRow, nTab,
3706 0 : (SCCOL)pAry[i].EndColumn, (SCROW)pAry[i].EndRow, nTab );
3707 :
3708 0 : aMarkData.SetMultiMarkArea( aRange );
3709 : }
3710 : }
3711 :
3712 0 : OUString aNameStr(aName);
3713 0 : OUString aCommStr(aComment);
3714 :
3715 0 : Color aColor( COL_LIGHTGRAY ); // Default
3716 0 : sal_uInt16 nFlags = SC_SCENARIO_SHOWFRAME | SC_SCENARIO_PRINTFRAME | SC_SCENARIO_TWOWAY | SC_SCENARIO_PROTECT;
3717 :
3718 0 : pDocShell->MakeScenario( nTab, aNameStr, aCommStr, aColor, nFlags, aMarkData );
3719 0 : }
3720 0 : }
3721 :
3722 0 : void SAL_CALL ScScenariosObj::removeByName( const OUString& aName )
3723 : throw(uno::RuntimeException, std::exception)
3724 : {
3725 0 : SolarMutexGuard aGuard;
3726 : SCTAB nIndex;
3727 0 : if ( pDocShell && GetScenarioIndex_Impl( aName, nIndex ) )
3728 0 : pDocShell->GetDocFunc().DeleteTable( nTab+nIndex+1, true, true );
3729 0 : }
3730 :
3731 : // XEnumerationAccess
3732 :
3733 0 : uno::Reference<container::XEnumeration> SAL_CALL ScScenariosObj::createEnumeration()
3734 : throw(uno::RuntimeException, std::exception)
3735 : {
3736 0 : SolarMutexGuard aGuard;
3737 0 : return new ScIndexEnumeration(this, OUString("com.sun.star.sheet.ScenariosEnumeration"));
3738 : }
3739 :
3740 : // XIndexAccess
3741 :
3742 0 : sal_Int32 SAL_CALL ScScenariosObj::getCount() throw(uno::RuntimeException, std::exception)
3743 : {
3744 0 : SolarMutexGuard aGuard;
3745 0 : SCTAB nCount = 0;
3746 0 : if ( pDocShell )
3747 : {
3748 0 : ScDocument* pDoc = pDocShell->GetDocument();
3749 0 : if (!pDoc->IsScenario(nTab))
3750 : {
3751 0 : SCTAB nTabCount = pDoc->GetTableCount();
3752 0 : SCTAB nNext = nTab + 1;
3753 0 : while (nNext < nTabCount && pDoc->IsScenario(nNext))
3754 : {
3755 0 : ++nCount;
3756 0 : ++nNext;
3757 : }
3758 : }
3759 : }
3760 0 : return nCount;
3761 : }
3762 :
3763 0 : uno::Any SAL_CALL ScScenariosObj::getByIndex( sal_Int32 nIndex )
3764 : throw(lang::IndexOutOfBoundsException,
3765 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
3766 : {
3767 0 : SolarMutexGuard aGuard;
3768 0 : uno::Reference<sheet::XScenario> xScen(GetObjectByIndex_Impl(nIndex));
3769 0 : if (xScen.is())
3770 0 : return uno::makeAny(xScen);
3771 : else
3772 0 : throw lang::IndexOutOfBoundsException();
3773 : }
3774 :
3775 0 : uno::Type SAL_CALL ScScenariosObj::getElementType() throw(uno::RuntimeException, std::exception)
3776 : {
3777 0 : SolarMutexGuard aGuard;
3778 0 : return getCppuType((uno::Reference<sheet::XScenario>*)0);
3779 : }
3780 :
3781 0 : sal_Bool SAL_CALL ScScenariosObj::hasElements() throw(uno::RuntimeException, std::exception)
3782 : {
3783 0 : SolarMutexGuard aGuard;
3784 0 : return ( getCount() != 0 );
3785 : }
3786 :
3787 0 : uno::Any SAL_CALL ScScenariosObj::getByName( const OUString& aName )
3788 : throw(container::NoSuchElementException,
3789 : lang::WrappedTargetException, uno::RuntimeException, std::exception)
3790 : {
3791 0 : SolarMutexGuard aGuard;
3792 0 : uno::Reference<sheet::XScenario> xScen(GetObjectByName_Impl(aName));
3793 0 : if (xScen.is())
3794 0 : return uno::makeAny(xScen);
3795 : else
3796 0 : throw container::NoSuchElementException();
3797 : }
3798 :
3799 0 : uno::Sequence<OUString> SAL_CALL ScScenariosObj::getElementNames()
3800 : throw(uno::RuntimeException, std::exception)
3801 : {
3802 0 : SolarMutexGuard aGuard;
3803 0 : SCTAB nCount = (SCTAB)getCount();
3804 0 : uno::Sequence<OUString> aSeq(nCount);
3805 :
3806 0 : if ( pDocShell ) // sonst ist auch Count = 0
3807 : {
3808 0 : OUString aTabName;
3809 0 : ScDocument* pDoc = pDocShell->GetDocument();
3810 0 : OUString* pAry = aSeq.getArray();
3811 0 : for (SCTAB i=0; i<nCount; i++)
3812 0 : if (pDoc->GetName( nTab+i+1, aTabName ))
3813 0 : pAry[i] = aTabName;
3814 : }
3815 :
3816 0 : return aSeq;
3817 : }
3818 :
3819 0 : sal_Bool SAL_CALL ScScenariosObj::hasByName( const OUString& aName )
3820 : throw(uno::RuntimeException, std::exception)
3821 : {
3822 0 : SolarMutexGuard aGuard;
3823 : SCTAB nIndex;
3824 0 : return GetScenarioIndex_Impl( aName, nIndex );
3825 0 : }
3826 :
3827 :
3828 :
3829 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
