Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "vcl/layout.hxx"
21 : #include "vcl/print.hxx"
22 : #include "vcl/svapp.hxx"
23 : #include "vcl/metaact.hxx"
24 : #include "vcl/configsettings.hxx"
25 : #include "vcl/unohelp.hxx"
26 :
27 : #include "printdlg.hxx"
28 : #include "svdata.hxx"
29 : #include "salinst.hxx"
30 : #include "salprn.hxx"
31 : #include "svids.hrc"
32 :
33 : #include "tools/urlobj.hxx"
34 :
35 : #include "com/sun/star/container/XNameAccess.hpp"
36 : #include "com/sun/star/ui/dialogs/FilePicker.hpp"
37 : #include "com/sun/star/ui/dialogs/XFilterManager.hpp"
38 : #include "com/sun/star/ui/dialogs/TemplateDescription.hpp"
39 : #include "com/sun/star/ui/dialogs/ExecutableDialogResults.hpp"
40 : #include "com/sun/star/view/DuplexMode.hpp"
41 : #include "com/sun/star/lang/XMultiServiceFactory.hpp"
42 : #include "com/sun/star/awt/Size.hpp"
43 : #include "comphelper/processfactory.hxx"
44 :
45 : #include <boost/unordered_map.hpp>
46 : #include <boost/unordered_set.hpp>
47 :
48 : using namespace com::sun::star;
49 : using namespace com::sun::star::uno;
50 : using namespace com::sun::star::beans;
51 : using namespace vcl;
52 :
53 0 : class ImplPageCache
54 : {
55 0 : struct CacheEntry
56 : {
57 : GDIMetaFile aPage;
58 : PrinterController::PageSize aSize;
59 : };
60 :
61 : std::vector< CacheEntry > maPages;
62 : std::vector< sal_Int32 > maPageNumbers;
63 : std::vector< sal_Int32 > maCacheRanking;
64 :
65 : static const sal_Int32 nCacheSize = 6;
66 :
67 0 : void updateRanking( sal_Int32 nLastHit )
68 : {
69 0 : if( maCacheRanking[0] != nLastHit )
70 : {
71 0 : for( sal_Int32 i = nCacheSize-1; i > 0; i-- )
72 0 : maCacheRanking[i] = maCacheRanking[i-1];
73 0 : maCacheRanking[0] = nLastHit;
74 : }
75 0 : }
76 :
77 : public:
78 0 : ImplPageCache()
79 : : maPages( nCacheSize )
80 : , maPageNumbers( nCacheSize, -1 )
81 0 : , maCacheRanking( nCacheSize )
82 : {
83 0 : for( sal_Int32 i = 0; i < nCacheSize; i++ )
84 0 : maCacheRanking[i] = nCacheSize - i - 1;
85 0 : }
86 :
87 : // caution: does not ensure uniqueness
88 0 : void insert( sal_Int32 i_nPageNo, const GDIMetaFile& i_rPage, const PrinterController::PageSize& i_rSize )
89 : {
90 0 : sal_Int32 nReplacePage = maCacheRanking.back();
91 0 : maPages[ nReplacePage ].aPage = i_rPage;
92 0 : maPages[ nReplacePage ].aSize = i_rSize;
93 0 : maPageNumbers[ nReplacePage ] = i_nPageNo;
94 : // cache insertion means in our case, the page was just queried
95 : // so update the ranking
96 0 : updateRanking( nReplacePage );
97 0 : }
98 :
99 : // caution: bad algorithm; should there ever be reason to increase the cache size beyond 6
100 : // this needs to be urgently rewritten. However do NOT increase the cache size lightly,
101 : // whole pages can be rather memory intensive
102 0 : bool get( sal_Int32 i_nPageNo, GDIMetaFile& o_rPageFile, PrinterController::PageSize& o_rSize )
103 : {
104 0 : for( sal_Int32 i = 0; i < nCacheSize; ++i )
105 : {
106 0 : if( maPageNumbers[i] == i_nPageNo )
107 : {
108 0 : updateRanking( i );
109 0 : o_rPageFile = maPages[i].aPage;
110 0 : o_rSize = maPages[i].aSize;
111 0 : return true;
112 : }
113 : }
114 0 : return false;
115 : }
116 :
117 0 : void invalidate()
118 : {
119 0 : for( sal_Int32 i = 0; i < nCacheSize; ++i )
120 : {
121 0 : maPageNumbers[i] = -1;
122 0 : maPages[i].aPage.Clear();
123 0 : maCacheRanking[i] = nCacheSize - i - 1;
124 : }
125 0 : }
126 : };
127 :
128 : class vcl::ImplPrinterControllerData
129 : {
130 : public:
131 0 : struct ControlDependency
132 : {
133 : OUString maDependsOnName;
134 : sal_Int32 mnDependsOnEntry;
135 :
136 0 : ControlDependency() : mnDependsOnEntry( -1 ) {}
137 : };
138 :
139 : typedef boost::unordered_map< OUString, size_t, OUStringHash > PropertyToIndexMap;
140 : typedef boost::unordered_map< OUString, ControlDependency, OUStringHash > ControlDependencyMap;
141 : typedef boost::unordered_map< OUString, Sequence< sal_Bool >, OUStringHash > ChoiceDisableMap;
142 :
143 : boost::shared_ptr<Printer> mpPrinter;
144 : Sequence< PropertyValue > maUIOptions;
145 : std::vector< PropertyValue > maUIProperties;
146 : std::vector< bool > maUIPropertyEnabled;
147 : PropertyToIndexMap maPropertyToIndex;
148 : Link maOptionChangeHdl;
149 : ControlDependencyMap maControlDependencies;
150 : ChoiceDisableMap maChoiceDisableMap;
151 : bool mbFirstPage;
152 : bool mbLastPage;
153 : bool mbReversePageOrder;
154 : bool mbPapersizeFromSetup;
155 : view::PrintableState meJobState;
156 :
157 : vcl::PrinterController::MultiPageSetup maMultiPage;
158 :
159 : vcl::PrintProgressDialog* mpProgress;
160 :
161 : ImplPageCache maPageCache;
162 :
163 : // set by user through printer properties subdialog of printer settings dialog
164 : Size maDefaultPageSize;
165 : // set by user through printer properties subdialog of printer settings dialog
166 : sal_Int32 mnDefaultPaperBin;
167 : // Set by user through printer properties subdialog of print dialog.
168 : // Overrides application-set tray for a page.
169 : sal_Int32 mnFixedPaperBin;
170 :
171 : // N.B. Apparently we have three levels of paper tray settings
172 : // (latter overrides former):
173 : // 1. default tray
174 : // 2. tray set for a concrete page by an application, e.g., writer
175 : // allows setting a printer tray (for the default printer) for a
176 : // page style. This setting can be overridden by user by selecting
177 : // "Use only paper tray from printer preferences" on the Options
178 : // page in the print dialog, in which case the default tray is
179 : // used for all pages.
180 : // 3. tray set in printer properties the printer dialog
181 : // I'm not quite sure why 1. and 3. are distinct, but the commit
182 : // history suggests this is intentional...
183 :
184 0 : ImplPrinterControllerData() :
185 : mbFirstPage( true ),
186 : mbLastPage( false ),
187 : mbReversePageOrder( false ),
188 : mbPapersizeFromSetup( false ),
189 : meJobState( view::PrintableState_JOB_STARTED ),
190 : mpProgress( NULL ),
191 : mnDefaultPaperBin( -1 ),
192 0 : mnFixedPaperBin( -1 )
193 0 : {}
194 0 : ~ImplPrinterControllerData() { delete mpProgress; }
195 :
196 0 : Size getRealPaperSize( const Size& i_rPageSize, bool bNoNUP ) const
197 : {
198 0 : if( mbPapersizeFromSetup )
199 0 : return maDefaultPageSize;
200 0 : if( maMultiPage.nRows * maMultiPage.nColumns > 1 && ! bNoNUP )
201 0 : return maMultiPage.aPaperSize;
202 0 : return i_rPageSize;
203 : }
204 0 : bool isFixedPageSize() const
205 0 : { return mbPapersizeFromSetup; }
206 : PrinterController::PageSize modifyJobSetup( const Sequence< PropertyValue >& i_rProps, bool bNoNUP );
207 : void resetPaperToLastConfigured();
208 : };
209 :
210 0 : PrinterController::PrinterController( const boost::shared_ptr<Printer>& i_pPrinter )
211 0 : : mpImplData( new ImplPrinterControllerData )
212 : {
213 0 : mpImplData->mpPrinter = i_pPrinter;
214 0 : }
215 :
216 0 : static OUString queryFile( Printer* pPrinter )
217 : {
218 0 : OUString aResult;
219 :
220 0 : uno::Reference< uno::XComponentContext > xContext( ::comphelper::getProcessComponentContext() );
221 0 : uno::Reference< ui::dialogs::XFilePicker3 > xFilePicker = ui::dialogs::FilePicker::createWithMode(xContext, ui::dialogs::TemplateDescription::FILESAVE_AUTOEXTENSION);
222 :
223 : try
224 : {
225 : #ifdef UNX
226 : // add PostScript and PDF
227 0 : bool bPS = true, bPDF = true;
228 0 : if( pPrinter )
229 : {
230 0 : if( pPrinter->GetCapabilities( PRINTER_CAPABILITIES_PDF ) )
231 0 : bPS = false;
232 : else
233 0 : bPDF = false;
234 : }
235 0 : if( bPS )
236 0 : xFilePicker->appendFilter( OUString( "PostScript" ), OUString( "*.ps" ) );
237 0 : if( bPDF )
238 0 : xFilePicker->appendFilter( OUString( "Portable Document Format" ), OUString( "*.pdf" ) );
239 : #elif defined WNT
240 : (void)pPrinter;
241 : xFilePicker->appendFilter( OUString( "*.PRN" ), OUString( "*.prn" ) );
242 : #endif
243 : // add arbitrary files
244 0 : xFilePicker->appendFilter(VclResId(SV_STDTEXT_ALLFILETYPES), "*.*");
245 : }
246 0 : catch (const lang::IllegalArgumentException&)
247 : {
248 : SAL_WARN( "vcl.gdi", "caught IllegalArgumentException when registering filter" );
249 : }
250 :
251 0 : if( xFilePicker->execute() == ui::dialogs::ExecutableDialogResults::OK )
252 : {
253 0 : uno::Sequence< OUString > aPathSeq( xFilePicker->getFiles() );
254 0 : INetURLObject aObj( aPathSeq[0] );
255 0 : aResult = aObj.PathToFileName();
256 : }
257 0 : return aResult;
258 : }
259 :
260 0 : struct PrintJobAsync
261 : {
262 : boost::shared_ptr<PrinterController> mpController;
263 : JobSetup maInitSetup;
264 :
265 0 : PrintJobAsync( const boost::shared_ptr<PrinterController>& i_pController,
266 : const JobSetup& i_rInitSetup
267 : )
268 0 : : mpController( i_pController ), maInitSetup( i_rInitSetup )
269 0 : {}
270 :
271 : DECL_LINK( ExecJob, void* );
272 : };
273 :
274 0 : IMPL_LINK_NOARG(PrintJobAsync, ExecJob)
275 : {
276 0 : Printer::ImplPrintJob( mpController, maInitSetup );
277 :
278 : // clean up, do not access members after this
279 0 : delete this;
280 :
281 0 : return 0;
282 : }
283 :
284 0 : void Printer::PrintJob( const boost::shared_ptr<PrinterController>& i_pController,
285 : const JobSetup& i_rInitSetup
286 : )
287 : {
288 0 : bool bSynchronous = false;
289 0 : PropertyValue* pVal = i_pController->getValue( OUString( "Wait" ) );
290 0 : if( pVal )
291 0 : pVal->Value >>= bSynchronous;
292 :
293 0 : if( bSynchronous )
294 0 : ImplPrintJob( i_pController, i_rInitSetup );
295 : else
296 : {
297 0 : PrintJobAsync* pAsync = new PrintJobAsync( i_pController, i_rInitSetup );
298 0 : Application::PostUserEvent( LINK( pAsync, PrintJobAsync, ExecJob ) );
299 : }
300 0 : }
301 :
302 0 : void Printer::ImplPrintJob( const boost::shared_ptr<PrinterController>& i_pController,
303 : const JobSetup& i_rInitSetup
304 : )
305 : {
306 0 : boost::shared_ptr<PrinterController> pController( i_pController );
307 :
308 : // check if there is a default printer; if not, show an error box (if appropriate)
309 0 : if( GetDefaultPrinterName().isEmpty() )
310 : {
311 0 : if( pController->isShowDialogs()
312 : // && ! pController->isDirectPrint()
313 : )
314 : {
315 : MessageDialog aBox(NULL, "ErrorNoPrinterDialog",
316 0 : "vcl/ui/errornoprinterdialog.ui");
317 0 : aBox.Execute();
318 : }
319 : pController->setValue( OUString( "IsDirect" ),
320 0 : makeAny( false ) );
321 : }
322 :
323 : // setup printer
324 :
325 : // #i114306# changed behavior back from persistence
326 : // if no specific printer is already set, create the default printer
327 0 : if( ! pController->getPrinter() )
328 : {
329 0 : OUString aPrinterName( i_rInitSetup.GetPrinterName() );
330 0 : boost::shared_ptr<Printer> pPrinter( new Printer( aPrinterName ) );
331 0 : pPrinter->SetJobSetup( i_rInitSetup );
332 0 : pController->setPrinter( pPrinter );
333 : }
334 :
335 : // reset last page property
336 0 : i_pController->setLastPage( false );
337 :
338 : // update "PageRange" property inferring from other properties:
339 : // case 1: "Pages" set from UNO API ->
340 : // setup "Print Selection" and insert "PageRange" attribute
341 : // case 2: "All pages" is selected
342 : // update "Page range" attribute to have a sensible default,
343 : // but leave "All" as selected
344 :
345 : // "Pages" attribute from API is now equivalent to "PageRange"
346 : // AND "PrintContent" = 1 except calc where it is "PrintRange" = 1
347 : // Argh ! That sure needs cleaning up
348 0 : PropertyValue* pContentVal = i_pController->getValue( OUString( "PrintRange" ) );
349 0 : if( ! pContentVal )
350 0 : pContentVal = i_pController->getValue( OUString( "PrintContent" ) );
351 :
352 : // case 1: UNO API has set "Pages"
353 0 : PropertyValue* pPagesVal = i_pController->getValue( OUString( "Pages" ) );
354 0 : if( pPagesVal )
355 : {
356 0 : OUString aPagesVal;
357 0 : pPagesVal->Value >>= aPagesVal;
358 0 : if( !aPagesVal.isEmpty() )
359 : {
360 : // "Pages" attribute from API is now equivalent to "PageRange"
361 : // AND "PrintContent" = 1 except calc where it is "PrintRange" = 1
362 : // Argh ! That sure needs cleaning up
363 0 : if( pContentVal )
364 : {
365 0 : pContentVal->Value = makeAny( sal_Int32( 1 ) );
366 0 : i_pController->setValue( OUString( "PageRange" ), pPagesVal->Value );
367 : }
368 0 : }
369 : }
370 : // case 2: is "All" selected ?
371 0 : else if( pContentVal )
372 : {
373 0 : sal_Int32 nContent = -1;
374 0 : if( pContentVal->Value >>= nContent )
375 : {
376 0 : if( nContent == 0 )
377 : {
378 : // do not overwrite PageRange if it is already set
379 0 : PropertyValue* pRangeVal = i_pController->getValue( OUString( "PageRange" ) );
380 0 : OUString aRange;
381 0 : if( pRangeVal )
382 0 : pRangeVal->Value >>= aRange;
383 0 : if( aRange.isEmpty() )
384 : {
385 0 : sal_Int32 nPages = i_pController->getPageCount();
386 0 : if( nPages > 0 )
387 : {
388 0 : OUStringBuffer aBuf( 32 );
389 0 : aBuf.appendAscii( "1" );
390 0 : if( nPages > 1 )
391 : {
392 0 : aBuf.appendAscii( "-" );
393 0 : aBuf.append( nPages );
394 : }
395 0 : i_pController->setValue( OUString( "PageRange" ), makeAny( aBuf.makeStringAndClear() ) );
396 : }
397 0 : }
398 : }
399 : }
400 : }
401 :
402 0 : PropertyValue* pReverseVal = i_pController->getValue( OUString( "PrintReverse" ) );
403 0 : if( pReverseVal )
404 : {
405 0 : bool bReverse = false;
406 0 : pReverseVal->Value >>= bReverse;
407 0 : pController->setReversePrint( bReverse );
408 : }
409 :
410 0 : PropertyValue* pPapersizeFromSetupVal = i_pController->getValue( OUString( "PapersizeFromSetup" ) );
411 0 : if( pPapersizeFromSetupVal )
412 : {
413 0 : bool bPapersizeFromSetup = false;
414 0 : pPapersizeFromSetupVal->Value >>= bPapersizeFromSetup;
415 0 : pController->setPapersizeFromSetup( bPapersizeFromSetup );
416 : }
417 :
418 : // setup NUp printing from properties
419 0 : sal_Int32 nRows = i_pController->getIntProperty( OUString( "NUpRows" ), 1 );
420 0 : sal_Int32 nCols = i_pController->getIntProperty( OUString( "NUpColumns" ), 1 );
421 0 : if( nRows > 1 || nCols > 1 )
422 : {
423 0 : PrinterController::MultiPageSetup aMPS;
424 0 : aMPS.nRows = nRows > 1 ? nRows : 1;
425 0 : aMPS.nColumns = nCols > 1 ? nCols : 1;
426 0 : sal_Int32 nValue = i_pController->getIntProperty( OUString( "NUpPageMarginLeft" ), aMPS.nLeftMargin );
427 0 : if( nValue >= 0 )
428 0 : aMPS.nLeftMargin = nValue;
429 0 : nValue = i_pController->getIntProperty( OUString( "NUpPageMarginRight" ), aMPS.nRightMargin );
430 0 : if( nValue >= 0 )
431 0 : aMPS.nRightMargin = nValue;
432 0 : nValue = i_pController->getIntProperty( OUString( "NUpPageMarginTop" ), aMPS.nTopMargin );
433 0 : if( nValue >= 0 )
434 0 : aMPS.nTopMargin = nValue;
435 0 : nValue = i_pController->getIntProperty( OUString( "NUpPageMarginBottom" ), aMPS.nBottomMargin );
436 0 : if( nValue >= 0 )
437 0 : aMPS.nBottomMargin = nValue;
438 0 : nValue = i_pController->getIntProperty( OUString( "NUpHorizontalSpacing" ), aMPS.nHorizontalSpacing );
439 0 : if( nValue >= 0 )
440 0 : aMPS.nHorizontalSpacing = nValue;
441 0 : nValue = i_pController->getIntProperty( OUString( "NUpVerticalSpacing" ), aMPS.nVerticalSpacing );
442 0 : if( nValue >= 0 )
443 0 : aMPS.nVerticalSpacing = nValue;
444 0 : aMPS.bDrawBorder = i_pController->getBoolProperty( OUString( "NUpDrawBorder" ), aMPS.bDrawBorder );
445 0 : aMPS.nOrder = static_cast<PrinterController::NupOrderType>(i_pController->getIntProperty( OUString( "NUpSubPageOrder" ), aMPS.nOrder ));
446 0 : aMPS.aPaperSize = i_pController->getPrinter()->PixelToLogic( i_pController->getPrinter()->GetPaperSizePixel(), MapMode( MAP_100TH_MM ) );
447 0 : PropertyValue* pPgSizeVal = i_pController->getValue( OUString( "NUpPaperSize" ) );
448 0 : awt::Size aSizeVal;
449 0 : if( pPgSizeVal && (pPgSizeVal->Value >>= aSizeVal) )
450 : {
451 0 : aMPS.aPaperSize.Width() = aSizeVal.Width;
452 0 : aMPS.aPaperSize.Height() = aSizeVal.Height;
453 : }
454 :
455 0 : i_pController->setMultipage( aMPS );
456 : }
457 :
458 : // in direct print case check whether there is anything to print.
459 : // if not, show an errorbox (if appropriate)
460 0 : if( pController->isShowDialogs() && pController->isDirectPrint() )
461 : {
462 0 : if( pController->getFilteredPageCount() == 0 )
463 : {
464 : MessageDialog aBox(NULL, "ErrorNoContentDialog",
465 0 : "vcl/ui/errornocontentdialog.ui");
466 0 : aBox.Execute();
467 0 : return;
468 : }
469 : }
470 :
471 : // check if the printer brings up its own dialog
472 : // in that case leave the work to that dialog
473 0 : if( ! pController->getPrinter()->GetCapabilities( PRINTER_CAPABILITIES_EXTERNALDIALOG ) &&
474 0 : ! pController->isDirectPrint() &&
475 0 : pController->isShowDialogs()
476 : )
477 : {
478 : try
479 : {
480 0 : PrintDialog aDlg( NULL, i_pController );
481 0 : if( ! aDlg.Execute() )
482 : {
483 0 : i_pController->abortJob();
484 0 : return;
485 : }
486 0 : if( aDlg.isPrintToFile() )
487 : {
488 0 : OUString aFile = queryFile( pController->getPrinter().get() );
489 0 : if( aFile.isEmpty() )
490 : {
491 0 : i_pController->abortJob();
492 0 : return;
493 : }
494 : pController->setValue( OUString( "LocalFileName" ),
495 0 : makeAny( aFile ) );
496 : }
497 0 : else if( aDlg.isSingleJobs() )
498 : {
499 : pController->setValue( OUString( "PrintCollateAsSingleJobs" ),
500 0 : makeAny( true ) );
501 0 : }
502 : }
503 0 : catch (const std::bad_alloc&)
504 : {
505 : }
506 : }
507 :
508 0 : pController->pushPropertiesToPrinter();
509 :
510 0 : OUString aJobName;
511 0 : PropertyValue* pJobNameVal = pController->getValue( OUString( "JobName" ) );
512 0 : if( pJobNameVal )
513 0 : pJobNameVal->Value >>= aJobName;
514 :
515 0 : pController->getPrinter()->StartJob( aJobName, pController );
516 :
517 0 : pController->resetPaperToLastConfigured();
518 :
519 0 : pController->jobFinished( pController->getJobState() );
520 : }
521 :
522 0 : bool Printer::StartJob( const OUString& i_rJobName, boost::shared_ptr<vcl::PrinterController>& i_pController )
523 : {
524 0 : mnError = PRINTER_OK;
525 :
526 0 : if ( IsDisplayPrinter() )
527 0 : return false;
528 :
529 0 : if ( IsJobActive() || IsPrinting() )
530 0 : return false;
531 :
532 0 : sal_uLong nCopies = mnCopyCount;
533 0 : bool bCollateCopy = mbCollateCopy;
534 0 : bool bUserCopy = false;
535 :
536 0 : if ( nCopies > 1 )
537 : {
538 : sal_uLong nDevCopy;
539 :
540 0 : if ( bCollateCopy )
541 0 : nDevCopy = GetCapabilities( PRINTER_CAPABILITIES_COLLATECOPIES );
542 : else
543 0 : nDevCopy = GetCapabilities( PRINTER_CAPABILITIES_COPIES );
544 :
545 : // need to do copies by hand ?
546 0 : if ( nCopies > nDevCopy )
547 : {
548 0 : bUserCopy = true;
549 0 : nCopies = 1;
550 0 : bCollateCopy = false;
551 : }
552 : }
553 : else
554 0 : bCollateCopy = false;
555 :
556 0 : ImplSVData* pSVData = ImplGetSVData();
557 0 : mpPrinter = pSVData->mpDefInst->CreatePrinter( mpInfoPrinter );
558 :
559 0 : if ( !mpPrinter )
560 0 : return false;
561 :
562 0 : bool bSinglePrintJobs = false;
563 0 : PropertyValue* pSingleValue = i_pController->getValue( OUString( "PrintCollateAsSingleJobs" ) );
564 0 : if( pSingleValue )
565 : {
566 0 : pSingleValue->Value >>= bSinglePrintJobs;
567 : }
568 :
569 0 : PropertyValue* pFileValue = i_pController->getValue( OUString( "LocalFileName" ) );
570 0 : if( pFileValue )
571 : {
572 0 : OUString aFile;
573 0 : pFileValue->Value >>= aFile;
574 0 : if( !aFile.isEmpty() )
575 : {
576 0 : mbPrintFile = true;
577 0 : maPrintFile = aFile;
578 0 : bSinglePrintJobs = false;
579 0 : }
580 : }
581 :
582 0 : OUString* pPrintFile = NULL;
583 0 : if ( mbPrintFile )
584 0 : pPrintFile = &maPrintFile;
585 0 : mpPrinterOptions->ReadFromConfig( mbPrintFile );
586 :
587 0 : maJobName = i_rJobName;
588 0 : mnCurPage = 1;
589 0 : mnCurPrintPage = 1;
590 0 : mbPrinting = true;
591 0 : if( GetCapabilities( PRINTER_CAPABILITIES_USEPULLMODEL ) )
592 : {
593 0 : mbJobActive = true;
594 : // sallayer does all necessary page printing
595 : // and also handles showing a dialog
596 : // that also means it must call jobStarted when the dialog is finished
597 : // it also must set the JobState of the Controller
598 0 : if( mpPrinter->StartJob( pPrintFile,
599 : i_rJobName,
600 : Application::GetDisplayName(),
601 : maJobSetup.ImplGetConstData(),
602 0 : *i_pController ) )
603 : {
604 0 : EndJob();
605 : }
606 : else
607 : {
608 0 : mnError = ImplSalPrinterErrorCodeToVCL( mpPrinter->GetErrorCode() );
609 0 : if ( !mnError )
610 0 : mnError = PRINTER_GENERALERROR;
611 0 : pSVData->mpDefInst->DestroyPrinter( mpPrinter );
612 0 : mnCurPage = 0;
613 0 : mnCurPrintPage = 0;
614 0 : mbPrinting = false;
615 0 : mpPrinter = NULL;
616 0 : mbJobActive = false;
617 :
618 0 : GDIMetaFile aDummyFile;
619 0 : i_pController->setLastPage(true);
620 0 : i_pController->getFilteredPageFile(0, aDummyFile);
621 :
622 0 : return false;
623 : }
624 : }
625 : else
626 : {
627 : // possibly a dialog has been shown
628 : // now the real job starts
629 0 : i_pController->setJobState( view::PrintableState_JOB_STARTED );
630 0 : i_pController->jobStarted();
631 :
632 0 : int nJobs = 1;
633 0 : int nOuterRepeatCount = 1;
634 0 : int nInnerRepeatCount = 1;
635 0 : if( bUserCopy )
636 : {
637 0 : if( mbCollateCopy )
638 0 : nOuterRepeatCount = mnCopyCount;
639 : else
640 0 : nInnerRepeatCount = mnCopyCount;
641 : }
642 0 : if( bSinglePrintJobs )
643 : {
644 0 : nJobs = mnCopyCount;
645 0 : nCopies = 1;
646 0 : nOuterRepeatCount = nInnerRepeatCount = 1;
647 : }
648 :
649 0 : for( int nJobIteration = 0; nJobIteration < nJobs; nJobIteration++ )
650 : {
651 0 : bool bError = false, bAborted = false;
652 0 : if( mpPrinter->StartJob( pPrintFile,
653 : i_rJobName,
654 : Application::GetDisplayName(),
655 : nCopies,
656 : bCollateCopy,
657 0 : i_pController->isDirectPrint(),
658 0 : maJobSetup.ImplGetConstData() ) )
659 : {
660 0 : mbJobActive = true;
661 0 : i_pController->createProgressDialog();
662 0 : const int nPages = i_pController->getFilteredPageCount();
663 : // abort job, if no pages will be printed.
664 0 : if ( nPages == 0 )
665 : {
666 0 : i_pController->abortJob();
667 0 : bAborted = true;
668 : }
669 0 : for( int nOuterIteration = 0; nOuterIteration < nOuterRepeatCount && ! bAborted; nOuterIteration++ )
670 : {
671 0 : for( int nPage = 0; nPage < nPages && ! bAborted; nPage++ )
672 : {
673 0 : for( int nInnerIteration = 0; nInnerIteration < nInnerRepeatCount && ! bAborted; nInnerIteration++ )
674 : {
675 0 : if( nPage == nPages-1 &&
676 0 : nOuterIteration == nOuterRepeatCount-1 &&
677 0 : nInnerIteration == nInnerRepeatCount-1 &&
678 0 : nJobIteration == nJobs-1 )
679 : {
680 0 : i_pController->setLastPage( true );
681 : }
682 0 : i_pController->printFilteredPage( nPage );
683 0 : if( i_pController->isProgressCanceled() )
684 : {
685 0 : i_pController->abortJob();
686 : }
687 0 : if (i_pController->getJobState() ==
688 : view::PrintableState_JOB_ABORTED)
689 : {
690 0 : bAborted = true;
691 : }
692 : }
693 : }
694 : // FIXME: duplex ?
695 : }
696 0 : EndJob();
697 :
698 0 : if( nJobIteration < nJobs-1 )
699 : {
700 0 : mpPrinter = pSVData->mpDefInst->CreatePrinter( mpInfoPrinter );
701 :
702 0 : if ( mpPrinter )
703 : {
704 0 : maJobName = i_rJobName;
705 0 : mnCurPage = 1;
706 0 : mnCurPrintPage = 1;
707 0 : mbPrinting = true;
708 : }
709 : else
710 0 : bError = true;
711 : }
712 : }
713 : else
714 0 : bError = true;
715 :
716 0 : if( bError )
717 : {
718 0 : mnError = mpPrinter ? ImplSalPrinterErrorCodeToVCL(mpPrinter->GetErrorCode()) : 0;
719 0 : if ( !mnError )
720 0 : mnError = PRINTER_GENERALERROR;
721 0 : i_pController->setJobState( mnError == PRINTER_ABORT
722 : ? view::PrintableState_JOB_ABORTED
723 0 : : view::PrintableState_JOB_FAILED );
724 0 : if( mpPrinter )
725 0 : pSVData->mpDefInst->DestroyPrinter( mpPrinter );
726 0 : mnCurPage = 0;
727 0 : mnCurPrintPage = 0;
728 0 : mbPrinting = false;
729 0 : mpPrinter = NULL;
730 :
731 0 : return false;
732 : }
733 : }
734 :
735 0 : if( i_pController->getJobState() == view::PrintableState_JOB_STARTED )
736 0 : i_pController->setJobState( view::PrintableState_JOB_SPOOLED );
737 : }
738 :
739 : // make last used printer persistent for UI jobs
740 0 : if( i_pController->isShowDialogs() && ! i_pController->isDirectPrint() )
741 : {
742 0 : SettingsConfigItem* pItem = SettingsConfigItem::get();
743 : pItem->setValue( OUString( "PrintDialog" ),
744 : OUString( "LastPrinterUsed" ),
745 0 : GetName()
746 0 : );
747 : }
748 :
749 0 : return true;
750 : }
751 :
752 0 : PrinterController::~PrinterController()
753 : {
754 0 : delete mpImplData;
755 0 : }
756 :
757 0 : view::PrintableState PrinterController::getJobState() const
758 : {
759 0 : return mpImplData->meJobState;
760 : }
761 :
762 0 : void PrinterController::setJobState( view::PrintableState i_eState )
763 : {
764 0 : mpImplData->meJobState = i_eState;
765 0 : }
766 :
767 0 : const boost::shared_ptr<Printer>& PrinterController::getPrinter() const
768 : {
769 0 : return mpImplData->mpPrinter;
770 : }
771 :
772 0 : void PrinterController::setPrinter( const boost::shared_ptr<Printer>& i_rPrinter )
773 : {
774 0 : mpImplData->mpPrinter = i_rPrinter;
775 : setValue( OUString( "Name" ),
776 0 : makeAny( OUString( i_rPrinter->GetName() ) ) );
777 0 : mpImplData->mnDefaultPaperBin = mpImplData->mpPrinter->GetPaperBin();
778 0 : mpImplData->mpPrinter->Push();
779 0 : mpImplData->mpPrinter->SetMapMode(MapMode(MAP_100TH_MM));
780 0 : mpImplData->maDefaultPageSize = mpImplData->mpPrinter->GetPaperSize();
781 0 : mpImplData->mpPrinter->Pop();
782 0 : mpImplData->mnFixedPaperBin = -1;
783 0 : }
784 :
785 0 : void PrinterController::resetPrinterOptions( bool i_bFileOutput )
786 : {
787 0 : PrinterOptions aOpt;
788 0 : aOpt.ReadFromConfig( i_bFileOutput );
789 0 : mpImplData->mpPrinter->SetPrinterOptions( aOpt );
790 0 : }
791 :
792 0 : bool PrinterController::setupPrinter( Window* i_pParent )
793 : {
794 0 : bool bRet = false;
795 0 : if( mpImplData->mpPrinter.get() )
796 : {
797 0 : mpImplData->mpPrinter->Push();
798 0 : mpImplData->mpPrinter->SetMapMode(MapMode(MAP_100TH_MM));
799 :
800 : // get current data
801 0 : Size aPaperSize(mpImplData->mpPrinter->GetPaperSize());
802 0 : sal_uInt16 nPaperBin = mpImplData->mpPrinter->GetPaperBin();
803 :
804 : // reset paper size back to last configured size, not
805 : // whatever happens to be the current page
806 0 : resetPaperToLastConfigured();
807 :
808 : // call driver setup
809 0 : bRet = mpImplData->mpPrinter->Setup( i_pParent );
810 0 : Size aNewPaperSize(mpImplData->mpPrinter->GetPaperSize());
811 0 : if (bRet)
812 : {
813 0 : bool bInvalidateCache = false;
814 :
815 : // was papersize overridden ? if so we need to take action if we're
816 : // configured to use the driver papersize
817 0 : if (aNewPaperSize != mpImplData->maDefaultPageSize)
818 : {
819 0 : mpImplData->maDefaultPageSize = aNewPaperSize;
820 0 : bInvalidateCache = getPapersizeFromSetup();
821 : }
822 :
823 : // was bin overridden ? if so we need to take action
824 0 : sal_uInt16 nNewPaperBin = mpImplData->mpPrinter->GetPaperBin();
825 0 : if (nNewPaperBin != nPaperBin)
826 : {
827 0 : mpImplData->mnFixedPaperBin = nNewPaperBin;
828 0 : bInvalidateCache = true;
829 : }
830 :
831 0 : if (bInvalidateCache)
832 : {
833 0 : mpImplData->maPageCache.invalidate();
834 : }
835 : }
836 : else
837 : {
838 : //restore to whatever it was before we entered this method
839 0 : if (aPaperSize != aNewPaperSize)
840 0 : mpImplData->mpPrinter->SetPaperSizeUser(aPaperSize, !mpImplData->isFixedPageSize());
841 : }
842 0 : mpImplData->mpPrinter->Pop();
843 : }
844 0 : return bRet;
845 : }
846 :
847 0 : PrinterController::PageSize vcl::ImplPrinterControllerData::modifyJobSetup( const Sequence< PropertyValue >& i_rProps, bool bNoNUP )
848 : {
849 0 : PrinterController::PageSize aPageSize;
850 0 : aPageSize.aSize = mpPrinter->GetPaperSize();
851 0 : awt::Size aSetSize, aIsSize;
852 0 : sal_Int32 nPaperBin = mnDefaultPaperBin;
853 0 : for( sal_Int32 nProperty = 0, nPropertyCount = i_rProps.getLength(); nProperty < nPropertyCount; ++nProperty )
854 : {
855 0 : if ( i_rProps[ nProperty ].Name == "PreferredPageSize" )
856 : {
857 0 : i_rProps[ nProperty ].Value >>= aSetSize;
858 : }
859 0 : else if ( i_rProps[ nProperty ].Name == "PageSize" )
860 : {
861 0 : i_rProps[ nProperty ].Value >>= aIsSize;
862 : }
863 0 : else if ( i_rProps[ nProperty ].Name == "PageIncludesNonprintableArea" )
864 : {
865 0 : bool bVal = false;
866 0 : i_rProps[ nProperty ].Value >>= bVal;
867 0 : aPageSize.bFullPaper = bVal;
868 : }
869 0 : else if ( i_rProps[ nProperty ].Name == "PrinterPaperTray" )
870 : {
871 0 : sal_Int32 nBin = -1;
872 0 : i_rProps[ nProperty ].Value >>= nBin;
873 0 : if( nBin >= 0 && nBin < mpPrinter->GetPaperBinCount() )
874 0 : nPaperBin = nBin;
875 : }
876 : }
877 :
878 0 : Size aCurSize( mpPrinter->GetPaperSize() );
879 0 : if( aSetSize.Width && aSetSize.Height )
880 : {
881 0 : Size aSetPaperSize( aSetSize.Width, aSetSize.Height );
882 0 : Size aRealPaperSize( getRealPaperSize( aSetPaperSize, bNoNUP ) );
883 0 : if( aRealPaperSize != aCurSize )
884 0 : aIsSize = aSetSize;
885 : }
886 :
887 0 : if( aIsSize.Width && aIsSize.Height )
888 : {
889 0 : aPageSize.aSize.Width() = aIsSize.Width;
890 0 : aPageSize.aSize.Height() = aIsSize.Height;
891 :
892 0 : Size aRealPaperSize( getRealPaperSize( aPageSize.aSize, bNoNUP ) );
893 0 : if( aRealPaperSize != aCurSize )
894 0 : mpPrinter->SetPaperSizeUser( aRealPaperSize, ! isFixedPageSize() );
895 : }
896 :
897 : // paper bin set from properties in print dialog overrides
898 : // application default for a page
899 0 : if ( mnFixedPaperBin != -1 )
900 0 : nPaperBin = mnFixedPaperBin;
901 :
902 0 : if( nPaperBin != -1 && nPaperBin != mpPrinter->GetPaperBin() )
903 0 : mpPrinter->SetPaperBin( nPaperBin );
904 :
905 0 : return aPageSize;
906 : }
907 :
908 : //fdo#61886
909 :
910 : //when printing is finished, set the paper size of the printer to either what
911 : //the user explicitly set as the desired paper size, or fallback to whatever
912 : //the printer had before printing started. That way it doesn't contain the last
913 : //paper size of a multiple paper size using document when we are in our normal
914 : //auto accept document paper size mode and end up overwriting the original
915 : //paper size setting for file->printer_settings just by pressing "ok" in the
916 : //print dialog
917 0 : void vcl::ImplPrinterControllerData::resetPaperToLastConfigured()
918 : {
919 0 : mpPrinter->Push();
920 0 : mpPrinter->SetMapMode(MapMode(MAP_100TH_MM));
921 0 : Size aCurSize(mpPrinter->GetPaperSize());
922 0 : if (aCurSize != maDefaultPageSize)
923 0 : mpPrinter->SetPaperSizeUser(maDefaultPageSize, !isFixedPageSize());
924 0 : mpPrinter->Pop();
925 0 : }
926 :
927 0 : int PrinterController::getPageCountProtected() const
928 : {
929 0 : const MapMode aMapMode( MAP_100TH_MM );
930 :
931 0 : mpImplData->mpPrinter->Push();
932 0 : mpImplData->mpPrinter->SetMapMode( aMapMode );
933 0 : int nPages = getPageCount();
934 0 : mpImplData->mpPrinter->Pop();
935 0 : return nPages;
936 : }
937 :
938 0 : Sequence< PropertyValue > PrinterController::getPageParametersProtected( int i_nPage ) const
939 : {
940 0 : const MapMode aMapMode( MAP_100TH_MM );
941 :
942 0 : mpImplData->mpPrinter->Push();
943 0 : mpImplData->mpPrinter->SetMapMode( aMapMode );
944 0 : Sequence< PropertyValue > aResult( getPageParameters( i_nPage ) );
945 0 : mpImplData->mpPrinter->Pop();
946 0 : return aResult;
947 : }
948 :
949 0 : PrinterController::PageSize PrinterController::getPageFile( int i_nUnfilteredPage, GDIMetaFile& o_rMtf, bool i_bMayUseCache )
950 : {
951 : // update progress if necessary
952 0 : if( mpImplData->mpProgress )
953 : {
954 : // do nothing if printing is canceled
955 0 : if( mpImplData->mpProgress->isCanceled() )
956 0 : return PrinterController::PageSize();
957 0 : mpImplData->mpProgress->tick();
958 0 : Application::Reschedule( true );
959 : }
960 :
961 0 : if( i_bMayUseCache )
962 : {
963 0 : PrinterController::PageSize aPageSize;
964 0 : if( mpImplData->maPageCache.get( i_nUnfilteredPage, o_rMtf, aPageSize ) )
965 : {
966 0 : return aPageSize;
967 : }
968 : }
969 : else
970 0 : mpImplData->maPageCache.invalidate();
971 :
972 0 : o_rMtf.Clear();
973 :
974 : // get page parameters
975 0 : Sequence< PropertyValue > aPageParm( getPageParametersProtected( i_nUnfilteredPage ) );
976 0 : const MapMode aMapMode( MAP_100TH_MM );
977 :
978 0 : mpImplData->mpPrinter->Push();
979 0 : mpImplData->mpPrinter->SetMapMode( aMapMode );
980 :
981 : // modify job setup if necessary
982 0 : PrinterController::PageSize aPageSize = mpImplData->modifyJobSetup( aPageParm, true );
983 :
984 0 : o_rMtf.SetPrefSize( aPageSize.aSize );
985 0 : o_rMtf.SetPrefMapMode( aMapMode );
986 :
987 0 : mpImplData->mpPrinter->EnableOutput( false );
988 :
989 0 : o_rMtf.Record( mpImplData->mpPrinter.get() );
990 :
991 0 : printPage( i_nUnfilteredPage );
992 :
993 0 : o_rMtf.Stop();
994 0 : o_rMtf.WindStart();
995 0 : mpImplData->mpPrinter->Pop();
996 :
997 0 : if( i_bMayUseCache )
998 0 : mpImplData->maPageCache.insert( i_nUnfilteredPage, o_rMtf, aPageSize );
999 :
1000 : // reset "FirstPage" property to false now we've gotten at least our first one
1001 0 : mpImplData->mbFirstPage = false;
1002 :
1003 0 : return aPageSize;
1004 : }
1005 :
1006 0 : static void appendSubPage( GDIMetaFile& o_rMtf, const Rectangle& i_rClipRect, GDIMetaFile& io_rSubPage, bool i_bDrawBorder )
1007 : {
1008 : // intersect all clipregion actions with our clip rect
1009 0 : io_rSubPage.WindStart();
1010 0 : io_rSubPage.Clip( i_rClipRect );
1011 :
1012 : // save gstate
1013 0 : o_rMtf.AddAction( new MetaPushAction( PUSH_ALL ) );
1014 :
1015 : // clip to page rect
1016 0 : o_rMtf.AddAction( new MetaClipRegionAction( Region( i_rClipRect ), true ) );
1017 :
1018 : // append the subpage
1019 0 : io_rSubPage.WindStart();
1020 0 : io_rSubPage.Play( o_rMtf );
1021 :
1022 : // restore gstate
1023 0 : o_rMtf.AddAction( new MetaPopAction() );
1024 :
1025 : // draw a border
1026 0 : if( i_bDrawBorder )
1027 : {
1028 : // save gstate
1029 0 : o_rMtf.AddAction( new MetaPushAction( PUSH_LINECOLOR | PUSH_FILLCOLOR | PUSH_CLIPREGION | PUSH_MAPMODE ) );
1030 0 : o_rMtf.AddAction( new MetaMapModeAction( MapMode( MAP_100TH_MM ) ) );
1031 :
1032 0 : Rectangle aBorderRect( i_rClipRect );
1033 0 : o_rMtf.AddAction( new MetaLineColorAction( Color( COL_BLACK ), true ) );
1034 0 : o_rMtf.AddAction( new MetaFillColorAction( Color( COL_TRANSPARENT ), false ) );
1035 0 : o_rMtf.AddAction( new MetaRectAction( aBorderRect ) );
1036 :
1037 : // restore gstate
1038 0 : o_rMtf.AddAction( new MetaPopAction() );
1039 : }
1040 0 : }
1041 :
1042 0 : PrinterController::PageSize PrinterController::getFilteredPageFile( int i_nFilteredPage, GDIMetaFile& o_rMtf, bool i_bMayUseCache )
1043 : {
1044 0 : const MultiPageSetup& rMPS( mpImplData->maMultiPage );
1045 0 : int nSubPages = rMPS.nRows * rMPS.nColumns;
1046 0 : if( nSubPages < 1 )
1047 0 : nSubPages = 1;
1048 :
1049 : // reverse sheet order
1050 0 : if( mpImplData->mbReversePageOrder )
1051 : {
1052 0 : int nDocPages = getFilteredPageCount();
1053 0 : i_nFilteredPage = nDocPages - 1 - i_nFilteredPage;
1054 : }
1055 :
1056 : // there is no filtering to be done (and possibly the page size of the
1057 : // original page is to be set), when N-Up is "neutral" that is there is
1058 : // only one subpage and the margins are 0
1059 0 : if( nSubPages == 1 &&
1060 0 : rMPS.nLeftMargin == 0 && rMPS.nRightMargin == 0 &&
1061 0 : rMPS.nTopMargin == 0 && rMPS.nBottomMargin == 0 )
1062 : {
1063 0 : PrinterController::PageSize aPageSize = getPageFile( i_nFilteredPage, o_rMtf, i_bMayUseCache );
1064 0 : if (mpImplData->meJobState != view::PrintableState_JOB_STARTED)
1065 : { // rhbz#657394: check that we are still printing...
1066 0 : return PrinterController::PageSize();
1067 : }
1068 0 : Size aPaperSize = mpImplData->getRealPaperSize( aPageSize.aSize, true );
1069 0 : mpImplData->mpPrinter->SetMapMode( MapMode( MAP_100TH_MM ) );
1070 0 : mpImplData->mpPrinter->SetPaperSizeUser( aPaperSize, ! mpImplData->isFixedPageSize() );
1071 0 : if( aPaperSize != aPageSize.aSize )
1072 : {
1073 : // user overridden page size, center Metafile
1074 0 : o_rMtf.WindStart();
1075 0 : long nDX = (aPaperSize.Width() - aPageSize.aSize.Width()) / 2;
1076 0 : long nDY = (aPaperSize.Height() - aPageSize.aSize.Height()) / 2;
1077 0 : o_rMtf.Move( nDX, nDY, mpImplData->mpPrinter->ImplGetDPIX(), mpImplData->mpPrinter->ImplGetDPIY() );
1078 0 : o_rMtf.WindStart();
1079 0 : o_rMtf.SetPrefSize( aPaperSize );
1080 0 : aPageSize.aSize = aPaperSize;
1081 : }
1082 0 : return aPageSize;
1083 : }
1084 :
1085 : // set last page property really only on the very last page to be rendered
1086 : // that is on the last subpage of a NUp run
1087 0 : bool bIsLastPage = mpImplData->mbLastPage;
1088 0 : mpImplData->mbLastPage = false;
1089 :
1090 0 : Size aPaperSize( mpImplData->getRealPaperSize( mpImplData->maMultiPage.aPaperSize, false ) );
1091 :
1092 : // multi page area: page size minus margins + one time spacing right and down
1093 : // the added spacing is so each subpage can be calculated including its spacing
1094 0 : Size aMPArea( aPaperSize );
1095 0 : aMPArea.Width() -= rMPS.nLeftMargin + rMPS.nRightMargin;
1096 0 : aMPArea.Width() += rMPS.nHorizontalSpacing;
1097 0 : aMPArea.Height() -= rMPS.nTopMargin + rMPS.nBottomMargin;
1098 0 : aMPArea.Height() += rMPS.nVerticalSpacing;
1099 :
1100 : // determine offsets
1101 0 : long nAdvX = aMPArea.Width() / rMPS.nColumns;
1102 0 : long nAdvY = aMPArea.Height() / rMPS.nRows;
1103 :
1104 : // determine size of a "cell" subpage, leave a little space around pages
1105 0 : Size aSubPageSize( nAdvX - rMPS.nHorizontalSpacing, nAdvY - rMPS.nVerticalSpacing );
1106 :
1107 0 : o_rMtf.Clear();
1108 0 : o_rMtf.SetPrefSize( aPaperSize );
1109 0 : o_rMtf.SetPrefMapMode( MapMode( MAP_100TH_MM ) );
1110 0 : o_rMtf.AddAction( new MetaMapModeAction( MapMode( MAP_100TH_MM ) ) );
1111 :
1112 0 : int nDocPages = getPageCountProtected();
1113 0 : if (mpImplData->meJobState != view::PrintableState_JOB_STARTED)
1114 : { // rhbz#657394: check that we are still printing...
1115 0 : return PrinterController::PageSize();
1116 : }
1117 0 : for( int nSubPage = 0; nSubPage < nSubPages; nSubPage++ )
1118 : {
1119 : // map current sub page to real page
1120 0 : int nPage = (i_nFilteredPage * nSubPages + nSubPage) / rMPS.nRepeat;
1121 0 : if( nSubPage == nSubPages-1 ||
1122 0 : nPage == nDocPages-1 )
1123 : {
1124 0 : mpImplData->mbLastPage = bIsLastPage;
1125 : }
1126 0 : if( nPage >= 0 && nPage < nDocPages )
1127 : {
1128 0 : GDIMetaFile aPageFile;
1129 0 : PrinterController::PageSize aPageSize = getPageFile( nPage, aPageFile, i_bMayUseCache );
1130 0 : if( aPageSize.aSize.Width() && aPageSize.aSize.Height() )
1131 : {
1132 0 : long nCellX = 0, nCellY = 0;
1133 0 : switch( rMPS.nOrder )
1134 : {
1135 : case PrinterController::LRTB:
1136 0 : nCellX = (nSubPage % rMPS.nColumns);
1137 0 : nCellY = (nSubPage / rMPS.nColumns);
1138 0 : break;
1139 : case PrinterController::TBLR:
1140 0 : nCellX = (nSubPage / rMPS.nRows);
1141 0 : nCellY = (nSubPage % rMPS.nRows);
1142 0 : break;
1143 : case PrinterController::RLTB:
1144 0 : nCellX = rMPS.nColumns - 1 - (nSubPage % rMPS.nColumns);
1145 0 : nCellY = (nSubPage / rMPS.nColumns);
1146 0 : break;
1147 : case PrinterController::TBRL:
1148 0 : nCellX = rMPS.nColumns - 1 - (nSubPage / rMPS.nRows);
1149 0 : nCellY = (nSubPage % rMPS.nRows);
1150 0 : break;
1151 : }
1152 : // scale the metafile down to a sub page size
1153 0 : double fScaleX = double(aSubPageSize.Width())/double(aPageSize.aSize.Width());
1154 0 : double fScaleY = double(aSubPageSize.Height())/double(aPageSize.aSize.Height());
1155 0 : double fScale = std::min( fScaleX, fScaleY );
1156 0 : aPageFile.Scale( fScale, fScale );
1157 0 : aPageFile.WindStart();
1158 :
1159 : // move the subpage so it is centered in its "cell"
1160 0 : long nOffX = (aSubPageSize.Width() - long(double(aPageSize.aSize.Width()) * fScale)) / 2;
1161 0 : long nOffY = (aSubPageSize.Height() - long(double(aPageSize.aSize.Height()) * fScale)) / 2;
1162 0 : long nX = rMPS.nLeftMargin + nOffX + nAdvX * nCellX;
1163 0 : long nY = rMPS.nTopMargin + nOffY + nAdvY * nCellY;
1164 0 : aPageFile.Move( nX, nY, mpImplData->mpPrinter->ImplGetDPIX(), mpImplData->mpPrinter->ImplGetDPIY() );
1165 0 : aPageFile.WindStart();
1166 : // calculate border rectangle
1167 : Rectangle aSubPageRect( Point( nX, nY ),
1168 0 : Size( long(double(aPageSize.aSize.Width())*fScale),
1169 0 : long(double(aPageSize.aSize.Height())*fScale) ) );
1170 :
1171 : // append subpage to page
1172 0 : appendSubPage( o_rMtf, aSubPageRect, aPageFile, rMPS.bDrawBorder );
1173 0 : }
1174 : }
1175 : }
1176 0 : o_rMtf.WindStart();
1177 :
1178 : // subsequent getPageFile calls have changed the paper, reset it to current value
1179 0 : mpImplData->mpPrinter->SetMapMode( MapMode( MAP_100TH_MM ) );
1180 0 : mpImplData->mpPrinter->SetPaperSizeUser( aPaperSize, ! mpImplData->isFixedPageSize() );
1181 :
1182 0 : return PrinterController::PageSize( aPaperSize, true );
1183 : }
1184 :
1185 0 : int PrinterController::getFilteredPageCount()
1186 : {
1187 0 : int nDiv = mpImplData->maMultiPage.nRows * mpImplData->maMultiPage.nColumns;
1188 0 : if( nDiv < 1 )
1189 0 : nDiv = 1;
1190 0 : return (getPageCountProtected() * mpImplData->maMultiPage.nRepeat + (nDiv-1)) / nDiv;
1191 : }
1192 :
1193 0 : sal_uLong PrinterController::removeTransparencies( GDIMetaFile& i_rIn, GDIMetaFile& o_rOut )
1194 : {
1195 0 : sal_uLong nRestoreDrawMode = mpImplData->mpPrinter->GetDrawMode();
1196 0 : sal_Int32 nMaxBmpDPIX = mpImplData->mpPrinter->ImplGetDPIX();
1197 0 : sal_Int32 nMaxBmpDPIY = mpImplData->mpPrinter->ImplGetDPIY();
1198 :
1199 0 : const PrinterOptions& rPrinterOptions = mpImplData->mpPrinter->GetPrinterOptions();
1200 :
1201 : static const sal_Int32 OPTIMAL_BMP_RESOLUTION = 300;
1202 : static const sal_Int32 NORMAL_BMP_RESOLUTION = 200;
1203 :
1204 0 : if( rPrinterOptions.IsReduceBitmaps() )
1205 : {
1206 : // calculate maximum resolution for bitmap graphics
1207 0 : if( PRINTER_BITMAP_OPTIMAL == rPrinterOptions.GetReducedBitmapMode() )
1208 : {
1209 0 : nMaxBmpDPIX = std::min( sal_Int32(OPTIMAL_BMP_RESOLUTION), nMaxBmpDPIX );
1210 0 : nMaxBmpDPIY = std::min( sal_Int32(OPTIMAL_BMP_RESOLUTION), nMaxBmpDPIY );
1211 : }
1212 0 : else if( PRINTER_BITMAP_NORMAL == rPrinterOptions.GetReducedBitmapMode() )
1213 : {
1214 0 : nMaxBmpDPIX = std::min( sal_Int32(NORMAL_BMP_RESOLUTION), nMaxBmpDPIX );
1215 0 : nMaxBmpDPIY = std::min( sal_Int32(NORMAL_BMP_RESOLUTION), nMaxBmpDPIY );
1216 : }
1217 : else
1218 : {
1219 0 : nMaxBmpDPIX = std::min( sal_Int32(rPrinterOptions.GetReducedBitmapResolution()), nMaxBmpDPIX );
1220 0 : nMaxBmpDPIY = std::min( sal_Int32(rPrinterOptions.GetReducedBitmapResolution()), nMaxBmpDPIY );
1221 : }
1222 : }
1223 :
1224 : // convert to greysacles
1225 0 : if( rPrinterOptions.IsConvertToGreyscales() )
1226 : {
1227 0 : mpImplData->mpPrinter->SetDrawMode( mpImplData->mpPrinter->GetDrawMode() |
1228 : ( DRAWMODE_GRAYLINE | DRAWMODE_GRAYFILL | DRAWMODE_GRAYTEXT |
1229 0 : DRAWMODE_GRAYBITMAP | DRAWMODE_GRAYGRADIENT ) );
1230 : }
1231 :
1232 : // disable transparency output
1233 0 : if( rPrinterOptions.IsReduceTransparency() && ( PRINTER_TRANSPARENCY_NONE == rPrinterOptions.GetReducedTransparencyMode() ) )
1234 : {
1235 0 : mpImplData->mpPrinter->SetDrawMode( mpImplData->mpPrinter->GetDrawMode() | DRAWMODE_NOTRANSPARENCY );
1236 : }
1237 :
1238 0 : Color aBg( COL_TRANSPARENT ); // default: let RemoveTransparenciesFromMetaFile do its own background logic
1239 0 : if( mpImplData->maMultiPage.nRows * mpImplData->maMultiPage.nColumns > 1 )
1240 : {
1241 : // in N-Up printing we have no "page" background operation
1242 : // we also have no way to determine the paper color
1243 : // so let's go for white, which will kill 99.9% of the real cases
1244 0 : aBg = Color( COL_WHITE );
1245 : }
1246 0 : mpImplData->mpPrinter->RemoveTransparenciesFromMetaFile( i_rIn, o_rOut, nMaxBmpDPIX, nMaxBmpDPIY,
1247 0 : rPrinterOptions.IsReduceTransparency(),
1248 0 : rPrinterOptions.GetReducedTransparencyMode() == PRINTER_TRANSPARENCY_AUTO,
1249 0 : rPrinterOptions.IsReduceBitmaps() && rPrinterOptions.IsReducedBitmapIncludesTransparency(),
1250 : aBg
1251 0 : );
1252 0 : return nRestoreDrawMode;
1253 : }
1254 :
1255 0 : void PrinterController::printFilteredPage( int i_nPage )
1256 : {
1257 0 : if( mpImplData->meJobState != view::PrintableState_JOB_STARTED )
1258 0 : return;
1259 :
1260 0 : GDIMetaFile aPageFile;
1261 0 : PrinterController::PageSize aPageSize = getFilteredPageFile( i_nPage, aPageFile );
1262 :
1263 0 : if (mpImplData->meJobState != view::PrintableState_JOB_STARTED)
1264 : { // rhbz#657394: check that we are still printing...
1265 0 : return;
1266 : }
1267 :
1268 0 : if( mpImplData->mpProgress )
1269 : {
1270 : // do nothing if printing is canceled
1271 0 : if( mpImplData->mpProgress->isCanceled() )
1272 : {
1273 0 : setJobState( view::PrintableState_JOB_ABORTED );
1274 0 : return;
1275 : }
1276 : }
1277 :
1278 : // in N-Up printing set the correct page size
1279 0 : mpImplData->mpPrinter->SetMapMode( MAP_100TH_MM );
1280 : // aPageSize was filtered through mpImplData->getRealPaperSize already by getFilteredPageFile()
1281 0 : mpImplData->mpPrinter->SetPaperSizeUser( aPageSize.aSize, ! mpImplData->isFixedPageSize() );
1282 0 : if( mpImplData->mnFixedPaperBin != -1 &&
1283 0 : mpImplData->mpPrinter->GetPaperBin() != mpImplData->mnFixedPaperBin )
1284 : {
1285 0 : mpImplData->mpPrinter->SetPaperBin( mpImplData->mnFixedPaperBin );
1286 : }
1287 :
1288 : // if full paper is meant to be used, move the output to accommodate for pageoffset
1289 0 : if( aPageSize.bFullPaper )
1290 : {
1291 0 : Point aPageOffset( mpImplData->mpPrinter->GetPageOffset() );
1292 0 : aPageFile.WindStart();
1293 0 : aPageFile.Move( -aPageOffset.X(), -aPageOffset.Y(), mpImplData->mpPrinter->ImplGetDPIX(), mpImplData->mpPrinter->ImplGetDPIY() );
1294 : }
1295 :
1296 0 : GDIMetaFile aCleanedFile;
1297 0 : sal_uLong nRestoreDrawMode = removeTransparencies( aPageFile, aCleanedFile );
1298 :
1299 0 : mpImplData->mpPrinter->EnableOutput( true );
1300 :
1301 : // actually print the page
1302 0 : mpImplData->mpPrinter->ImplStartPage();
1303 :
1304 0 : mpImplData->mpPrinter->Push();
1305 0 : aCleanedFile.WindStart();
1306 0 : aCleanedFile.Play( mpImplData->mpPrinter.get() );
1307 0 : mpImplData->mpPrinter->Pop();
1308 :
1309 0 : mpImplData->mpPrinter->ImplEndPage();
1310 :
1311 0 : mpImplData->mpPrinter->SetDrawMode( nRestoreDrawMode );
1312 : }
1313 :
1314 0 : void PrinterController::jobStarted()
1315 : {
1316 0 : }
1317 :
1318 0 : void PrinterController::jobFinished( view::PrintableState )
1319 : {
1320 0 : }
1321 :
1322 0 : void PrinterController::abortJob()
1323 : {
1324 0 : setJobState( view::PrintableState_JOB_ABORTED );
1325 : // applications (well, sw) depend on a page request with "IsLastPage" = true
1326 : // to free resources, else they (well, sw) will crash eventually
1327 0 : setLastPage( true );
1328 0 : delete mpImplData->mpProgress;
1329 0 : mpImplData->mpProgress = NULL;
1330 0 : GDIMetaFile aMtf;
1331 0 : getPageFile( 0, aMtf, false );
1332 0 : }
1333 :
1334 0 : void PrinterController::setLastPage( bool i_bLastPage )
1335 : {
1336 0 : mpImplData->mbLastPage = i_bLastPage;
1337 0 : }
1338 :
1339 0 : void PrinterController::setReversePrint( bool i_bReverse )
1340 : {
1341 0 : mpImplData->mbReversePageOrder = i_bReverse;
1342 0 : }
1343 :
1344 0 : bool PrinterController::getReversePrint() const
1345 : {
1346 0 : return mpImplData->mbReversePageOrder;
1347 : }
1348 :
1349 0 : void PrinterController::setPapersizeFromSetup( bool i_bPapersizeFromSetup )
1350 : {
1351 0 : mpImplData->mbPapersizeFromSetup = i_bPapersizeFromSetup;
1352 0 : }
1353 :
1354 0 : bool PrinterController::getPapersizeFromSetup() const
1355 : {
1356 0 : return mpImplData->mbPapersizeFromSetup;
1357 : }
1358 :
1359 0 : Sequence< PropertyValue > PrinterController::getJobProperties( const Sequence< PropertyValue >& i_rMergeList ) const
1360 : {
1361 0 : boost::unordered_set< OUString, OUStringHash > aMergeSet;
1362 0 : size_t nResultLen = size_t(i_rMergeList.getLength()) + mpImplData->maUIProperties.size() + 3;
1363 0 : for( int i = 0; i < i_rMergeList.getLength(); i++ )
1364 0 : aMergeSet.insert( i_rMergeList[i].Name );
1365 :
1366 0 : Sequence< PropertyValue > aResult( nResultLen );
1367 0 : for( int i = 0; i < i_rMergeList.getLength(); i++ )
1368 0 : aResult[i] = i_rMergeList[i];
1369 0 : int nCur = i_rMergeList.getLength();
1370 0 : for( size_t i = 0; i < mpImplData->maUIProperties.size(); i++ )
1371 : {
1372 0 : if( aMergeSet.find( mpImplData->maUIProperties[i].Name ) == aMergeSet.end() )
1373 0 : aResult[nCur++] = mpImplData->maUIProperties[i];
1374 : }
1375 : // append IsFirstPage
1376 0 : if( aMergeSet.find( OUString( "IsFirstPage" ) ) == aMergeSet.end() )
1377 : {
1378 0 : PropertyValue aVal;
1379 0 : aVal.Name = "IsFirstPage";
1380 0 : aVal.Value <<= mpImplData->mbFirstPage;
1381 0 : aResult[nCur++] = aVal;
1382 : }
1383 : // append IsLastPage
1384 0 : if( aMergeSet.find( OUString( "IsLastPage" ) ) == aMergeSet.end() )
1385 : {
1386 0 : PropertyValue aVal;
1387 0 : aVal.Name = "IsLastPage";
1388 0 : aVal.Value <<= mpImplData->mbLastPage;
1389 0 : aResult[nCur++] = aVal;
1390 : }
1391 : // append IsPrinter
1392 0 : if( aMergeSet.find( OUString( "IsPrinter" ) ) == aMergeSet.end() )
1393 : {
1394 0 : PropertyValue aVal;
1395 0 : aVal.Name = "IsPrinter";
1396 0 : aVal.Value <<= sal_True;
1397 0 : aResult[nCur++] = aVal;
1398 : }
1399 0 : aResult.realloc( nCur );
1400 0 : return aResult;
1401 : }
1402 :
1403 0 : const Sequence< PropertyValue >& PrinterController::getUIOptions() const
1404 : {
1405 0 : return mpImplData->maUIOptions;
1406 : }
1407 :
1408 0 : PropertyValue* PrinterController::getValue( const OUString& i_rProperty )
1409 : {
1410 : boost::unordered_map< OUString, size_t, OUStringHash >::const_iterator it =
1411 0 : mpImplData->maPropertyToIndex.find( i_rProperty );
1412 0 : return it != mpImplData->maPropertyToIndex.end() ? &mpImplData->maUIProperties[it->second] : NULL;
1413 : }
1414 :
1415 0 : const PropertyValue* PrinterController::getValue( const OUString& i_rProperty ) const
1416 : {
1417 : boost::unordered_map< OUString, size_t, OUStringHash >::const_iterator it =
1418 0 : mpImplData->maPropertyToIndex.find( i_rProperty );
1419 0 : return it != mpImplData->maPropertyToIndex.end() ? &mpImplData->maUIProperties[it->second] : NULL;
1420 : }
1421 :
1422 0 : void PrinterController::setValue( const OUString& i_rName, const Any& i_rValue )
1423 : {
1424 0 : PropertyValue aVal;
1425 0 : aVal.Name = i_rName;
1426 0 : aVal.Value = i_rValue;
1427 :
1428 0 : setValue( aVal );
1429 0 : }
1430 :
1431 0 : void PrinterController::setValue( const PropertyValue& i_rValue )
1432 : {
1433 : boost::unordered_map< OUString, size_t, OUStringHash >::const_iterator it =
1434 0 : mpImplData->maPropertyToIndex.find( i_rValue.Name );
1435 0 : if( it != mpImplData->maPropertyToIndex.end() )
1436 0 : mpImplData->maUIProperties[ it->second ] = i_rValue;
1437 : else
1438 : {
1439 : // insert correct index into property map
1440 0 : mpImplData->maPropertyToIndex[ i_rValue.Name ] = mpImplData->maUIProperties.size();
1441 0 : mpImplData->maUIProperties.push_back( i_rValue );
1442 0 : mpImplData->maUIPropertyEnabled.push_back( true );
1443 : }
1444 0 : }
1445 :
1446 0 : void PrinterController::setUIOptions( const Sequence< PropertyValue >& i_rOptions )
1447 : {
1448 : DBG_ASSERT( mpImplData->maUIOptions.getLength() == 0, "setUIOptions called twice !" );
1449 :
1450 0 : mpImplData->maUIOptions = i_rOptions;
1451 :
1452 0 : for( int i = 0; i < i_rOptions.getLength(); i++ )
1453 : {
1454 0 : Sequence< PropertyValue > aOptProp;
1455 0 : i_rOptions[i].Value >>= aOptProp;
1456 0 : bool bIsEnabled = true;
1457 0 : bool bHaveProperty = false;
1458 0 : OUString aPropName;
1459 0 : vcl::ImplPrinterControllerData::ControlDependency aDep;
1460 0 : Sequence< sal_Bool > aChoicesDisabled;
1461 0 : for( int n = 0; n < aOptProp.getLength(); n++ )
1462 : {
1463 0 : const PropertyValue& rEntry( aOptProp[ n ] );
1464 0 : if ( rEntry.Name == "Property" )
1465 : {
1466 0 : PropertyValue aVal;
1467 0 : rEntry.Value >>= aVal;
1468 : DBG_ASSERT( mpImplData->maPropertyToIndex.find( aVal.Name )
1469 : == mpImplData->maPropertyToIndex.end(), "duplicate property entry" );
1470 0 : setValue( aVal );
1471 0 : aPropName = aVal.Name;
1472 0 : bHaveProperty = true;
1473 : }
1474 0 : else if ( rEntry.Name == "Enabled" )
1475 : {
1476 0 : bool bValue = true;
1477 0 : rEntry.Value >>= bValue;
1478 0 : bIsEnabled = bValue;
1479 : }
1480 0 : else if ( rEntry.Name == "DependsOnName" )
1481 : {
1482 0 : rEntry.Value >>= aDep.maDependsOnName;
1483 : }
1484 0 : else if ( rEntry.Name == "DependsOnEntry" )
1485 : {
1486 0 : rEntry.Value >>= aDep.mnDependsOnEntry;
1487 : }
1488 0 : else if ( rEntry.Name == "ChoicesDisabled" )
1489 : {
1490 0 : rEntry.Value >>= aChoicesDisabled;
1491 : }
1492 : }
1493 0 : if( bHaveProperty )
1494 : {
1495 : vcl::ImplPrinterControllerData::PropertyToIndexMap::const_iterator it =
1496 0 : mpImplData->maPropertyToIndex.find( aPropName );
1497 : // sanity check
1498 0 : if( it != mpImplData->maPropertyToIndex.end() )
1499 : {
1500 0 : mpImplData->maUIPropertyEnabled[ it->second ] = bIsEnabled;
1501 : }
1502 0 : if( !aDep.maDependsOnName.isEmpty() )
1503 0 : mpImplData->maControlDependencies[ aPropName ] = aDep;
1504 0 : if( aChoicesDisabled.getLength() > 0 )
1505 0 : mpImplData->maChoiceDisableMap[ aPropName ] = aChoicesDisabled;
1506 : }
1507 0 : }
1508 0 : }
1509 :
1510 0 : bool PrinterController::isUIOptionEnabled( const OUString& i_rProperty ) const
1511 : {
1512 0 : bool bEnabled = false;
1513 : boost::unordered_map< OUString, size_t, OUStringHash >::const_iterator prop_it =
1514 0 : mpImplData->maPropertyToIndex.find( i_rProperty );
1515 0 : if( prop_it != mpImplData->maPropertyToIndex.end() )
1516 : {
1517 0 : bEnabled = mpImplData->maUIPropertyEnabled[prop_it->second];
1518 :
1519 0 : if( bEnabled )
1520 : {
1521 : // check control dependencies
1522 : vcl::ImplPrinterControllerData::ControlDependencyMap::const_iterator it =
1523 0 : mpImplData->maControlDependencies.find( i_rProperty );
1524 0 : if( it != mpImplData->maControlDependencies.end() )
1525 : {
1526 : // check if the dependency is enabled
1527 : // if the dependency is disabled, we are too
1528 0 : bEnabled = isUIOptionEnabled( it->second.maDependsOnName );
1529 :
1530 0 : if( bEnabled )
1531 : {
1532 : // does the dependency have the correct value ?
1533 0 : const css::beans::PropertyValue* pVal = getValue( it->second.maDependsOnName );
1534 : OSL_ENSURE( pVal, "unknown property in dependency" );
1535 0 : if( pVal )
1536 : {
1537 0 : sal_Int32 nDepVal = 0;
1538 0 : bool bDepVal = false;
1539 0 : if( pVal->Value >>= nDepVal )
1540 : {
1541 0 : bEnabled = (nDepVal == it->second.mnDependsOnEntry) || (it->second.mnDependsOnEntry == -1);
1542 : }
1543 0 : else if( pVal->Value >>= bDepVal )
1544 : {
1545 : // could be a dependency on a checked boolean
1546 : // in this case the dependency is on a non zero for checked value
1547 0 : bEnabled = ( bDepVal && it->second.mnDependsOnEntry != 0) ||
1548 0 : ( ! bDepVal && it->second.mnDependsOnEntry == 0);
1549 : }
1550 : else
1551 : {
1552 : // if the type does not match something is awry
1553 : OSL_FAIL( "strange type in control dependency" );
1554 0 : bEnabled = false;
1555 : }
1556 : }
1557 : }
1558 : }
1559 : }
1560 : }
1561 0 : return bEnabled;
1562 : }
1563 :
1564 0 : bool PrinterController::isUIChoiceEnabled( const OUString& i_rProperty, sal_Int32 i_nValue ) const
1565 : {
1566 0 : bool bEnabled = true;
1567 : ImplPrinterControllerData::ChoiceDisableMap::const_iterator it =
1568 0 : mpImplData->maChoiceDisableMap.find( i_rProperty );
1569 0 : if(it != mpImplData->maChoiceDisableMap.end() )
1570 : {
1571 0 : const Sequence< sal_Bool >& rDisabled( it->second );
1572 0 : if( i_nValue >= 0 && i_nValue < rDisabled.getLength() )
1573 0 : bEnabled = ! rDisabled[i_nValue];
1574 : }
1575 0 : return bEnabled;
1576 : }
1577 :
1578 0 : OUString PrinterController::getDependency( const OUString& i_rProperty ) const
1579 : {
1580 0 : OUString aDependency;
1581 :
1582 : vcl::ImplPrinterControllerData::ControlDependencyMap::const_iterator it =
1583 0 : mpImplData->maControlDependencies.find( i_rProperty );
1584 0 : if( it != mpImplData->maControlDependencies.end() )
1585 0 : aDependency = it->second.maDependsOnName;
1586 :
1587 0 : return aDependency;
1588 : }
1589 :
1590 0 : OUString PrinterController::makeEnabled( const OUString& i_rProperty )
1591 : {
1592 0 : OUString aDependency;
1593 :
1594 : vcl::ImplPrinterControllerData::ControlDependencyMap::const_iterator it =
1595 0 : mpImplData->maControlDependencies.find( i_rProperty );
1596 0 : if( it != mpImplData->maControlDependencies.end() )
1597 : {
1598 0 : if( isUIOptionEnabled( it->second.maDependsOnName ) )
1599 : {
1600 0 : aDependency = it->second.maDependsOnName;
1601 0 : const css::beans::PropertyValue* pVal = getValue( aDependency );
1602 : OSL_ENSURE( pVal, "unknown property in dependency" );
1603 0 : if( pVal )
1604 : {
1605 0 : sal_Int32 nDepVal = 0;
1606 0 : bool bDepVal = false;
1607 0 : if( pVal->Value >>= nDepVal )
1608 : {
1609 0 : if( it->second.mnDependsOnEntry != -1 )
1610 : {
1611 0 : setValue( aDependency, makeAny( sal_Int32( it->second.mnDependsOnEntry ) ) );
1612 : }
1613 : }
1614 0 : else if( pVal->Value >>= bDepVal )
1615 : {
1616 0 : setValue( aDependency, makeAny( it->second.mnDependsOnEntry != 0 ) );
1617 : }
1618 : else
1619 : {
1620 : // if the type does not match something is awry
1621 : OSL_FAIL( "strange type in control dependency" );
1622 : }
1623 : }
1624 : }
1625 : }
1626 :
1627 0 : return aDependency;
1628 : }
1629 :
1630 0 : void PrinterController::setOptionChangeHdl( const Link& i_rHdl )
1631 : {
1632 0 : mpImplData->maOptionChangeHdl = i_rHdl;
1633 0 : }
1634 :
1635 0 : void PrinterController::createProgressDialog()
1636 : {
1637 0 : if( ! mpImplData->mpProgress )
1638 : {
1639 0 : bool bShow = true;
1640 0 : PropertyValue* pMonitor = getValue( OUString( "MonitorVisible" ) );
1641 0 : if( pMonitor )
1642 0 : pMonitor->Value >>= bShow;
1643 : else
1644 : {
1645 0 : const css::beans::PropertyValue* pVal = getValue( OUString( "IsApi" ) );
1646 0 : if( pVal )
1647 : {
1648 0 : bool bApi = false;
1649 0 : pVal->Value >>= bApi;
1650 0 : bShow = ! bApi;
1651 : }
1652 : }
1653 :
1654 0 : if( bShow && ! Application::IsHeadlessModeEnabled() )
1655 : {
1656 0 : mpImplData->mpProgress = new PrintProgressDialog( NULL, getPageCountProtected() );
1657 0 : mpImplData->mpProgress->Show();
1658 : }
1659 : }
1660 : else
1661 0 : mpImplData->mpProgress->reset();
1662 0 : }
1663 :
1664 0 : bool PrinterController::isProgressCanceled() const
1665 : {
1666 0 : return mpImplData->mpProgress && mpImplData->mpProgress->isCanceled();
1667 : }
1668 :
1669 0 : void PrinterController::setMultipage( const MultiPageSetup& i_rMPS )
1670 : {
1671 0 : mpImplData->maMultiPage = i_rMPS;
1672 0 : }
1673 :
1674 0 : const PrinterController::MultiPageSetup& PrinterController::getMultipage() const
1675 : {
1676 0 : return mpImplData->maMultiPage;
1677 : }
1678 :
1679 0 : void PrinterController::resetPaperToLastConfigured()
1680 : {
1681 0 : mpImplData->resetPaperToLastConfigured();
1682 0 : }
1683 :
1684 0 : void PrinterController::pushPropertiesToPrinter()
1685 : {
1686 0 : sal_Int32 nCopyCount = 1;
1687 : // set copycount and collate
1688 0 : const css::beans::PropertyValue* pVal = getValue( OUString( "CopyCount" ) );
1689 0 : if( pVal )
1690 0 : pVal->Value >>= nCopyCount;
1691 0 : bool bCollate = false;
1692 0 : pVal = getValue( OUString( "Collate" ) );
1693 0 : if( pVal )
1694 0 : pVal->Value >>= bCollate;
1695 0 : mpImplData->mpPrinter->SetCopyCount( static_cast<sal_uInt16>(nCopyCount), bCollate );
1696 :
1697 : // duplex mode
1698 0 : pVal = getValue( OUString( "DuplexMode" ) );
1699 0 : if( pVal )
1700 : {
1701 0 : sal_Int16 nDuplex = view::DuplexMode::UNKNOWN;
1702 0 : pVal->Value >>= nDuplex;
1703 0 : switch( nDuplex )
1704 : {
1705 0 : case view::DuplexMode::OFF: mpImplData->mpPrinter->SetDuplexMode( DUPLEX_OFF ); break;
1706 0 : case view::DuplexMode::LONGEDGE: mpImplData->mpPrinter->SetDuplexMode( DUPLEX_LONGEDGE ); break;
1707 0 : case view::DuplexMode::SHORTEDGE: mpImplData->mpPrinter->SetDuplexMode( DUPLEX_SHORTEDGE ); break;
1708 : }
1709 : }
1710 0 : }
1711 :
1712 0 : bool PrinterController::isShowDialogs() const
1713 : {
1714 0 : bool bApi = getBoolProperty( OUString( "IsApi" ), false );
1715 0 : return ! bApi && ! Application::IsHeadlessModeEnabled();
1716 : }
1717 :
1718 0 : bool PrinterController::isDirectPrint() const
1719 : {
1720 0 : bool bDirect = getBoolProperty( OUString( "IsDirect" ), false );
1721 0 : return bDirect;
1722 : }
1723 :
1724 0 : bool PrinterController::getBoolProperty( const OUString& i_rProperty, bool i_bFallback ) const
1725 : {
1726 0 : bool bRet = i_bFallback;
1727 0 : const css::beans::PropertyValue* pVal = getValue( i_rProperty );
1728 0 : if( pVal )
1729 0 : pVal->Value >>= bRet;
1730 0 : return bRet;
1731 : }
1732 :
1733 0 : sal_Int32 PrinterController::getIntProperty( const OUString& i_rProperty, sal_Int32 i_nFallback ) const
1734 : {
1735 0 : sal_Int32 nRet = i_nFallback;
1736 0 : const css::beans::PropertyValue* pVal = getValue( i_rProperty );
1737 0 : if( pVal )
1738 0 : pVal->Value >>= nRet;
1739 0 : return nRet;
1740 : }
1741 :
1742 : /*
1743 : * PrinterOptionsHelper
1744 : **/
1745 0 : Any PrinterOptionsHelper::getValue( const OUString& i_rPropertyName ) const
1746 : {
1747 0 : Any aRet;
1748 : boost::unordered_map< OUString, Any, OUStringHash >::const_iterator it =
1749 0 : m_aPropertyMap.find( i_rPropertyName );
1750 0 : if( it != m_aPropertyMap.end() )
1751 0 : aRet = it->second;
1752 0 : return aRet;
1753 : }
1754 :
1755 0 : bool PrinterOptionsHelper::getBoolValue( const OUString& i_rPropertyName, bool i_bDefault ) const
1756 : {
1757 0 : bool bRet = false;
1758 0 : Any aVal( getValue( i_rPropertyName ) );
1759 0 : return (aVal >>= bRet) ? bRet : i_bDefault;
1760 : }
1761 :
1762 0 : sal_Int64 PrinterOptionsHelper::getIntValue( const OUString& i_rPropertyName, sal_Int64 i_nDefault ) const
1763 : {
1764 0 : sal_Int64 nRet = 0;
1765 0 : Any aVal( getValue( i_rPropertyName ) );
1766 0 : return (aVal >>= nRet) ? nRet : i_nDefault;
1767 : }
1768 :
1769 0 : OUString PrinterOptionsHelper::getStringValue( const OUString& i_rPropertyName, const OUString& i_rDefault ) const
1770 : {
1771 0 : OUString aRet;
1772 0 : Any aVal( getValue( i_rPropertyName ) );
1773 0 : return (aVal >>= aRet) ? aRet : i_rDefault;
1774 : }
1775 :
1776 0 : bool PrinterOptionsHelper::processProperties( const Sequence< PropertyValue >& i_rNewProp,
1777 : std::set< OUString >* o_pChangeProp )
1778 : {
1779 0 : bool bChanged = false;
1780 :
1781 : // clear the changed set
1782 0 : if( o_pChangeProp )
1783 0 : o_pChangeProp->clear();
1784 :
1785 0 : sal_Int32 nElements = i_rNewProp.getLength();
1786 0 : const PropertyValue* pVals = i_rNewProp.getConstArray();
1787 0 : for( sal_Int32 i = 0; i < nElements; i++ )
1788 : {
1789 0 : bool bElementChanged = false;
1790 : boost::unordered_map< OUString, Any, OUStringHash >::iterator it =
1791 0 : m_aPropertyMap.find( pVals[ i ].Name );
1792 0 : if( it != m_aPropertyMap.end() )
1793 : {
1794 0 : if( it->second != pVals[ i ].Value )
1795 0 : bElementChanged = true;
1796 : }
1797 : else
1798 0 : bElementChanged = true;
1799 :
1800 0 : if( bElementChanged )
1801 : {
1802 0 : if( o_pChangeProp )
1803 0 : o_pChangeProp->insert( pVals[ i ].Name );
1804 0 : m_aPropertyMap[ pVals[i].Name ] = pVals[i].Value;
1805 0 : bChanged = true;
1806 : }
1807 : }
1808 0 : return bChanged;
1809 : }
1810 :
1811 0 : void PrinterOptionsHelper::appendPrintUIOptions( uno::Sequence< PropertyValue >& io_rProps ) const
1812 : {
1813 0 : if( m_aUIProperties.getLength() > 0 )
1814 : {
1815 0 : sal_Int32 nIndex = io_rProps.getLength();
1816 0 : io_rProps.realloc( nIndex+1 );
1817 0 : PropertyValue aVal;
1818 0 : aVal.Name = "ExtraPrintUIOptions";
1819 0 : aVal.Value = makeAny( m_aUIProperties );
1820 0 : io_rProps[ nIndex ] = aVal;
1821 : }
1822 0 : }
1823 :
1824 0 : Any PrinterOptionsHelper::setUIControlOpt(const css::uno::Sequence< OUString >& i_rIDs,
1825 : const OUString& i_rTitle,
1826 : const Sequence< OUString >& i_rHelpIds,
1827 : const OUString& i_rType,
1828 : const PropertyValue* i_pVal,
1829 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
1830 : {
1831 : sal_Int32 nElements =
1832 : 2 // ControlType + ID
1833 0 : + (i_rTitle.isEmpty() ? 0 : 1) // Text
1834 0 : + (i_rHelpIds.getLength() ? 1 : 0) // HelpId
1835 0 : + (i_pVal ? 1 : 0) // Property
1836 0 : + i_rControlOptions.maAddProps.getLength() // additional props
1837 0 : + (i_rControlOptions.maGroupHint.isEmpty() ? 0 : 1) // grouping
1838 0 : + (i_rControlOptions.mbInternalOnly ? 1 : 0) // internal hint
1839 0 : + (i_rControlOptions.mbEnabled ? 0 : 1) // enabled
1840 : ;
1841 0 : if( !i_rControlOptions.maDependsOnName.isEmpty() )
1842 : {
1843 0 : nElements += 1;
1844 0 : if( i_rControlOptions.mnDependsOnEntry != -1 )
1845 0 : nElements += 1;
1846 0 : if( i_rControlOptions.mbAttachToDependency )
1847 0 : nElements += 1;
1848 : }
1849 :
1850 0 : Sequence< PropertyValue > aCtrl( nElements );
1851 0 : sal_Int32 nUsed = 0;
1852 0 : if( !i_rTitle.isEmpty() )
1853 : {
1854 0 : aCtrl[nUsed ].Name = "Text";
1855 0 : aCtrl[nUsed++].Value = makeAny( i_rTitle );
1856 : }
1857 0 : if( i_rHelpIds.getLength() )
1858 : {
1859 0 : aCtrl[nUsed ].Name = "HelpId";
1860 0 : aCtrl[nUsed++].Value = makeAny( i_rHelpIds );
1861 : }
1862 0 : aCtrl[nUsed ].Name = "ControlType";
1863 0 : aCtrl[nUsed++].Value = makeAny( i_rType );
1864 0 : aCtrl[nUsed ].Name = "ID";
1865 0 : aCtrl[nUsed++].Value = makeAny( i_rIDs );
1866 0 : if( i_pVal )
1867 : {
1868 0 : aCtrl[nUsed ].Name = "Property";
1869 0 : aCtrl[nUsed++].Value = makeAny( *i_pVal );
1870 : }
1871 0 : if( !i_rControlOptions.maDependsOnName.isEmpty() )
1872 : {
1873 0 : aCtrl[nUsed ].Name = "DependsOnName";
1874 0 : aCtrl[nUsed++].Value = makeAny( i_rControlOptions.maDependsOnName );
1875 0 : if( i_rControlOptions.mnDependsOnEntry != -1 )
1876 : {
1877 0 : aCtrl[nUsed ].Name = "DependsOnEntry";
1878 0 : aCtrl[nUsed++].Value = makeAny( i_rControlOptions.mnDependsOnEntry );
1879 : }
1880 0 : if( i_rControlOptions.mbAttachToDependency )
1881 : {
1882 0 : aCtrl[nUsed ].Name = "AttachToDependency";
1883 0 : aCtrl[nUsed++].Value = makeAny( i_rControlOptions.mbAttachToDependency );
1884 : }
1885 : }
1886 0 : if( !i_rControlOptions.maGroupHint.isEmpty() )
1887 : {
1888 0 : aCtrl[nUsed ].Name = "GroupingHint";
1889 0 : aCtrl[nUsed++].Value <<= i_rControlOptions.maGroupHint;
1890 : }
1891 0 : if( i_rControlOptions.mbInternalOnly )
1892 : {
1893 0 : aCtrl[nUsed ].Name = "InternalUIOnly";
1894 0 : aCtrl[nUsed++].Value <<= sal_True;
1895 : }
1896 0 : if( ! i_rControlOptions.mbEnabled )
1897 : {
1898 0 : aCtrl[nUsed ].Name = "Enabled";
1899 0 : aCtrl[nUsed++].Value <<= sal_False;
1900 : }
1901 :
1902 0 : sal_Int32 nAddProps = i_rControlOptions.maAddProps.getLength();
1903 0 : for( sal_Int32 i = 0; i < nAddProps; i++ )
1904 0 : aCtrl[ nUsed++ ] = i_rControlOptions.maAddProps[i];
1905 :
1906 : DBG_ASSERT( nUsed == nElements, "nUsed != nElements, probable heap corruption" );
1907 :
1908 0 : return makeAny( aCtrl );
1909 : }
1910 :
1911 0 : Any PrinterOptionsHelper::setGroupControlOpt(const OUString& i_rID,
1912 : const OUString& i_rTitle,
1913 : const OUString& i_rHelpId)
1914 : {
1915 0 : Sequence< OUString > aHelpId;
1916 0 : if( !i_rHelpId.isEmpty() )
1917 : {
1918 0 : aHelpId.realloc( 1 );
1919 0 : *aHelpId.getArray() = i_rHelpId;
1920 : }
1921 0 : Sequence< OUString > aIds(1);
1922 0 : aIds[0] = i_rID;
1923 0 : return setUIControlOpt(aIds, i_rTitle, aHelpId, "Group");
1924 : }
1925 :
1926 0 : Any PrinterOptionsHelper::setSubgroupControlOpt(const OUString& i_rID,
1927 : const OUString& i_rTitle,
1928 : const OUString& i_rHelpId,
1929 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
1930 : {
1931 0 : Sequence< OUString > aHelpId;
1932 0 : if( !i_rHelpId.isEmpty() )
1933 : {
1934 0 : aHelpId.realloc( 1 );
1935 0 : *aHelpId.getArray() = i_rHelpId;
1936 : }
1937 0 : Sequence< OUString > aIds(1);
1938 0 : aIds[0] = i_rID;
1939 0 : return setUIControlOpt(aIds, i_rTitle, aHelpId, "Subgroup", NULL, i_rControlOptions);
1940 : }
1941 :
1942 0 : Any PrinterOptionsHelper::setBoolControlOpt(const OUString& i_rID,
1943 : const OUString& i_rTitle,
1944 : const OUString& i_rHelpId,
1945 : const OUString& i_rProperty,
1946 : bool i_bValue,
1947 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
1948 : {
1949 0 : Sequence< OUString > aHelpId;
1950 0 : if( !i_rHelpId.isEmpty() )
1951 : {
1952 0 : aHelpId.realloc( 1 );
1953 0 : *aHelpId.getArray() = i_rHelpId;
1954 : }
1955 0 : PropertyValue aVal;
1956 0 : aVal.Name = i_rProperty;
1957 0 : aVal.Value = makeAny( i_bValue );
1958 0 : Sequence< OUString > aIds(1);
1959 0 : aIds[0] = i_rID;
1960 0 : return setUIControlOpt(aIds, i_rTitle, aHelpId, "Bool", &aVal, i_rControlOptions);
1961 : }
1962 :
1963 0 : Any PrinterOptionsHelper::setChoiceRadiosControlOpt(const css::uno::Sequence< OUString >& i_rIDs,
1964 : const OUString& i_rTitle,
1965 : const Sequence< OUString >& i_rHelpId,
1966 : const OUString& i_rProperty,
1967 : const Sequence< OUString >& i_rChoices,
1968 : sal_Int32 i_nValue,
1969 : const Sequence< sal_Bool >& i_rDisabledChoices,
1970 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
1971 : {
1972 0 : UIControlOptions aOpt( i_rControlOptions );
1973 0 : sal_Int32 nUsed = aOpt.maAddProps.getLength();
1974 0 : aOpt.maAddProps.realloc( nUsed + 1 + (i_rDisabledChoices.getLength() ? 1 : 0) );
1975 0 : aOpt.maAddProps[nUsed].Name = "Choices";
1976 0 : aOpt.maAddProps[nUsed].Value = makeAny( i_rChoices );
1977 0 : if( i_rDisabledChoices.getLength() )
1978 : {
1979 0 : aOpt.maAddProps[nUsed+1].Name = "ChoicesDisabled";
1980 0 : aOpt.maAddProps[nUsed+1].Value = makeAny( i_rDisabledChoices );
1981 : }
1982 :
1983 0 : PropertyValue aVal;
1984 0 : aVal.Name = i_rProperty;
1985 0 : aVal.Value = makeAny( i_nValue );
1986 0 : return setUIControlOpt(i_rIDs, i_rTitle, i_rHelpId, "Radio", &aVal, aOpt);
1987 : }
1988 :
1989 0 : Any PrinterOptionsHelper::setChoiceListControlOpt(const OUString& i_rID,
1990 : const OUString& i_rTitle,
1991 : const Sequence< OUString >& i_rHelpId,
1992 : const OUString& i_rProperty,
1993 : const Sequence< OUString >& i_rChoices,
1994 : sal_Int32 i_nValue,
1995 : const Sequence< sal_Bool >& i_rDisabledChoices,
1996 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
1997 : {
1998 0 : UIControlOptions aOpt( i_rControlOptions );
1999 0 : sal_Int32 nUsed = aOpt.maAddProps.getLength();
2000 0 : aOpt.maAddProps.realloc( nUsed + 1 + (i_rDisabledChoices.getLength() ? 1 : 0) );
2001 0 : aOpt.maAddProps[nUsed].Name = "Choices";
2002 0 : aOpt.maAddProps[nUsed].Value = makeAny( i_rChoices );
2003 0 : if( i_rDisabledChoices.getLength() )
2004 : {
2005 0 : aOpt.maAddProps[nUsed+1].Name = "ChoicesDisabled";
2006 0 : aOpt.maAddProps[nUsed+1].Value = makeAny( i_rDisabledChoices );
2007 : }
2008 :
2009 0 : PropertyValue aVal;
2010 0 : aVal.Name = i_rProperty;
2011 0 : aVal.Value = makeAny( i_nValue );
2012 0 : Sequence< OUString > aIds(1);
2013 0 : aIds[0] = i_rID;
2014 0 : return setUIControlOpt(aIds, i_rTitle, i_rHelpId, "List", &aVal, aOpt);
2015 : }
2016 :
2017 0 : Any PrinterOptionsHelper::setRangeControlOpt(const OUString& i_rID,
2018 : const OUString& i_rTitle,
2019 : const OUString& i_rHelpId,
2020 : const OUString& i_rProperty,
2021 : sal_Int32 i_nValue,
2022 : sal_Int32 i_nMinValue,
2023 : sal_Int32 i_nMaxValue,
2024 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
2025 : {
2026 0 : UIControlOptions aOpt( i_rControlOptions );
2027 0 : if( i_nMaxValue >= i_nMinValue )
2028 : {
2029 0 : sal_Int32 nUsed = aOpt.maAddProps.getLength();
2030 0 : aOpt.maAddProps.realloc( nUsed + 2 );
2031 0 : aOpt.maAddProps[nUsed ].Name = "MinValue";
2032 0 : aOpt.maAddProps[nUsed++].Value = makeAny( i_nMinValue );
2033 0 : aOpt.maAddProps[nUsed ].Name = "MaxValue";
2034 0 : aOpt.maAddProps[nUsed++].Value = makeAny( i_nMaxValue );
2035 : }
2036 :
2037 0 : Sequence< OUString > aHelpId;
2038 0 : if( !i_rHelpId.isEmpty() )
2039 : {
2040 0 : aHelpId.realloc( 1 );
2041 0 : *aHelpId.getArray() = i_rHelpId;
2042 : }
2043 0 : PropertyValue aVal;
2044 0 : aVal.Name = i_rProperty;
2045 0 : aVal.Value = makeAny( i_nValue );
2046 0 : Sequence< OUString > aIds(1);
2047 0 : aIds[0] = i_rID;
2048 0 : return setUIControlOpt(aIds, i_rTitle, aHelpId, "Range", &aVal, aOpt);
2049 : }
2050 :
2051 0 : Any PrinterOptionsHelper::setEditControlOpt(const OUString& i_rID,
2052 : const OUString& i_rTitle,
2053 : const OUString& i_rHelpId,
2054 : const OUString& i_rProperty,
2055 : const OUString& i_rValue,
2056 : const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
2057 : {
2058 0 : Sequence< OUString > aHelpId;
2059 0 : if( !i_rHelpId.isEmpty() )
2060 : {
2061 0 : aHelpId.realloc( 1 );
2062 0 : *aHelpId.getArray() = i_rHelpId;
2063 : }
2064 0 : PropertyValue aVal;
2065 0 : aVal.Name = i_rProperty;
2066 0 : aVal.Value = makeAny( i_rValue );
2067 0 : Sequence< OUString > aIds(1);
2068 0 : aIds[0] = i_rID;
2069 0 : return setUIControlOpt(aIds, i_rTitle, aHelpId, "Edit", &aVal, i_rControlOptions);
2070 3 : }
2071 :
2072 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
