Branch data Line data Source code
1 : : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : : /*
3 : : * This file is part of the LibreOffice project.
4 : : *
5 : : * This Source Code Form is subject to the terms of the Mozilla Public
6 : : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : : *
9 : : * This file incorporates work covered by the following license notice:
10 : : *
11 : : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : : * contributor license agreements. See the NOTICE file distributed
13 : : * with this work for additional information regarding copyright
14 : : * ownership. The ASF licenses this file to you under the Apache
15 : : * License, Version 2.0 (the "License"); you may not use this file
16 : : * except in compliance with the License. You may obtain a copy of
17 : : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : : */
19 : :
20 : : #include <com/sun/star/container/XIdentifierContainer.hpp>
21 : : #include <com/sun/star/container/XIndexContainer.hpp>
22 : : #include <com/sun/star/drawing/GluePoint2.hpp>
23 : :
24 : : #include <cppuhelper/implbase2.hxx>
25 : :
26 : : #include <svx/svdmodel.hxx>
27 : : #include <svx/svdobj.hxx>
28 : : #include <svx/svdglue.hxx>
29 : : #include <svx/svdpage.hxx>
30 : :
31 : : using namespace ::com::sun::star;
32 : : using namespace ::rtl;
33 : : using namespace ::cppu;
34 : :
35 : : const sal_uInt16 NON_USER_DEFINED_GLUE_POINTS = 4;
36 : :
37 : : class SvxUnoGluePointAccess : public WeakImplHelper2< container::XIndexContainer, container::XIdentifierContainer >
38 : : {
39 : : private:
40 : : SdrObjectWeakRef mpObject;
41 : :
42 : : public:
43 : : SvxUnoGluePointAccess( SdrObject* pObject ) throw();
44 : : virtual ~SvxUnoGluePointAccess() throw();
45 : :
46 : : // XIdentifierContainer
47 : : virtual sal_Int32 SAL_CALL insert( const uno::Any& aElement ) throw (lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException);
48 : : virtual void SAL_CALL removeByIdentifier( sal_Int32 Identifier ) throw (container::NoSuchElementException, lang::WrappedTargetException, uno::RuntimeException);
49 : :
50 : : // XIdentifierReplace
51 : : virtual void SAL_CALL replaceByIdentifer( sal_Int32 Identifier, const uno::Any& aElement ) throw (lang::IllegalArgumentException, container::NoSuchElementException, lang::WrappedTargetException, uno::RuntimeException);
52 : :
53 : : // XIdentifierReplace
54 : : virtual uno::Any SAL_CALL getByIdentifier( sal_Int32 Identifier ) throw (container::NoSuchElementException, lang::WrappedTargetException, uno::RuntimeException);
55 : : virtual uno::Sequence< sal_Int32 > SAL_CALL getIdentifiers( ) throw (uno::RuntimeException);
56 : :
57 : : /* deprecated */
58 : : // XIndexContainer
59 : : virtual void SAL_CALL insertByIndex( sal_Int32 Index, const uno::Any& Element ) throw(lang::IllegalArgumentException, lang::IndexOutOfBoundsException, lang::WrappedTargetException, uno::RuntimeException);
60 : : virtual void SAL_CALL removeByIndex( sal_Int32 Index ) throw(lang::IndexOutOfBoundsException, lang::WrappedTargetException, uno::RuntimeException);
61 : :
62 : : /* deprecated */
63 : : // XIndexReplace
64 : : virtual void SAL_CALL replaceByIndex( sal_Int32 Index, const uno::Any& Element ) throw(lang::IllegalArgumentException, lang::IndexOutOfBoundsException, lang::WrappedTargetException, uno::RuntimeException);
65 : :
66 : : /* deprecated */
67 : : // XIndexAccess
68 : : virtual sal_Int32 SAL_CALL getCount( ) throw(uno::RuntimeException);
69 : : virtual uno::Any SAL_CALL getByIndex( sal_Int32 Index ) throw(lang::IndexOutOfBoundsException, lang::WrappedTargetException, uno::RuntimeException);
70 : :
71 : : // XElementAccess
72 : : virtual uno::Type SAL_CALL getElementType( ) throw( uno::RuntimeException);
73 : : virtual sal_Bool SAL_CALL hasElements( ) throw( uno::RuntimeException);
74 : : };
75 : :
76 : 272 : static void convert( const SdrGluePoint& rSdrGlue, drawing::GluePoint2& rUnoGlue ) throw()
77 : : {
78 : 272 : rUnoGlue.Position.X = rSdrGlue.GetPos().X();
79 : 272 : rUnoGlue.Position.Y = rSdrGlue.GetPos().Y();
80 : 272 : rUnoGlue.IsRelative = rSdrGlue.IsPercent();
81 : :
82 [ - - - + : 272 : switch( rSdrGlue.GetAlign() )
- - - -
- ]
83 : : {
84 : : case SDRVERTALIGN_TOP|SDRHORZALIGN_LEFT:
85 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_TOP_LEFT;
86 : 0 : break;
87 : : case SDRHORZALIGN_CENTER|SDRVERTALIGN_TOP:
88 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_TOP;
89 : 0 : break;
90 : : case SDRVERTALIGN_TOP|SDRHORZALIGN_RIGHT:
91 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_TOP_RIGHT;
92 : 0 : break;
93 : : case SDRHORZALIGN_CENTER|SDRVERTALIGN_CENTER:
94 : 272 : rUnoGlue.PositionAlignment = drawing::Alignment_CENTER;
95 : 272 : break;
96 : : case SDRHORZALIGN_RIGHT|SDRVERTALIGN_CENTER:
97 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_RIGHT;
98 : 0 : break;
99 : : case SDRHORZALIGN_LEFT|SDRVERTALIGN_BOTTOM:
100 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_BOTTOM_LEFT;
101 : 0 : break;
102 : : case SDRHORZALIGN_CENTER|SDRVERTALIGN_BOTTOM:
103 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_BOTTOM;
104 : 0 : break;
105 : : case SDRHORZALIGN_RIGHT|SDRVERTALIGN_BOTTOM:
106 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_BOTTOM_RIGHT;
107 : 0 : break;
108 : : // case SDRHORZALIGN_LEFT:
109 : : default:
110 : 0 : rUnoGlue.PositionAlignment = drawing::Alignment_LEFT;
111 : 0 : break;
112 : : }
113 : :
114 [ - - - - : 272 : switch( rSdrGlue.GetEscDir() )
- - + ]
115 : : {
116 : : case SDRESC_LEFT:
117 : 0 : rUnoGlue.Escape = drawing::EscapeDirection_LEFT;
118 : 0 : break;
119 : : case SDRESC_RIGHT:
120 : 0 : rUnoGlue.Escape = drawing::EscapeDirection_RIGHT;
121 : 0 : break;
122 : : case SDRESC_TOP:
123 : 0 : rUnoGlue.Escape = drawing::EscapeDirection_UP;
124 : 0 : break;
125 : : case SDRESC_BOTTOM:
126 : 0 : rUnoGlue.Escape = drawing::EscapeDirection_DOWN;
127 : 0 : break;
128 : : case SDRESC_HORZ:
129 : 0 : rUnoGlue.Escape = drawing::EscapeDirection_HORIZONTAL;
130 : 0 : break;
131 : : case SDRESC_VERT:
132 : 0 : rUnoGlue.Escape = drawing::EscapeDirection_VERTICAL;
133 : 0 : break;
134 : : // case SDRESC_SMART:
135 : : default:
136 : 272 : rUnoGlue.Escape = drawing::EscapeDirection_SMART;
137 : 272 : break;
138 : : }
139 : 272 : }
140 : :
141 : 0 : static void convert( const drawing::GluePoint2& rUnoGlue, SdrGluePoint& rSdrGlue ) throw()
142 : : {
143 : 0 : rSdrGlue.SetPos( Point( rUnoGlue.Position.X, rUnoGlue.Position.Y ) );
144 : 0 : rSdrGlue.SetPercent( rUnoGlue.IsRelative );
145 : :
146 [ # # # # : 0 : switch( rUnoGlue.PositionAlignment )
# # # #
# ]
147 : : {
148 : : case drawing::Alignment_TOP_LEFT:
149 : 0 : rSdrGlue.SetAlign( SDRVERTALIGN_TOP|SDRHORZALIGN_LEFT );
150 : 0 : break;
151 : : case drawing::Alignment_TOP:
152 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_CENTER|SDRVERTALIGN_TOP );
153 : 0 : break;
154 : : case drawing::Alignment_TOP_RIGHT:
155 : 0 : rSdrGlue.SetAlign( SDRVERTALIGN_TOP|SDRHORZALIGN_RIGHT );
156 : 0 : break;
157 : : case drawing::Alignment_CENTER:
158 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_CENTER|SDRVERTALIGN_CENTER );
159 : 0 : break;
160 : : case drawing::Alignment_RIGHT:
161 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_RIGHT|SDRVERTALIGN_CENTER );
162 : 0 : break;
163 : : case drawing::Alignment_BOTTOM_LEFT:
164 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_LEFT|SDRVERTALIGN_BOTTOM );
165 : 0 : break;
166 : : case drawing::Alignment_BOTTOM:
167 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_CENTER|SDRVERTALIGN_BOTTOM );
168 : 0 : break;
169 : : case drawing::Alignment_BOTTOM_RIGHT:
170 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_RIGHT|SDRVERTALIGN_BOTTOM );
171 : 0 : break;
172 : : // case SDRHORZALIGN_LEFT:
173 : : default:
174 : 0 : rSdrGlue.SetAlign( SDRHORZALIGN_LEFT );
175 : 0 : break;
176 : : }
177 [ # # # # : 0 : switch( rUnoGlue.Escape )
# # # ]
178 : : {
179 : : case drawing::EscapeDirection_LEFT:
180 : 0 : rSdrGlue.SetEscDir(SDRESC_LEFT);
181 : 0 : break;
182 : : case drawing::EscapeDirection_RIGHT:
183 : 0 : rSdrGlue.SetEscDir(SDRESC_RIGHT);
184 : 0 : break;
185 : : case drawing::EscapeDirection_UP:
186 : 0 : rSdrGlue.SetEscDir(SDRESC_TOP);
187 : 0 : break;
188 : : case drawing::EscapeDirection_DOWN:
189 : 0 : rSdrGlue.SetEscDir(SDRESC_BOTTOM);
190 : 0 : break;
191 : : case drawing::EscapeDirection_HORIZONTAL:
192 : 0 : rSdrGlue.SetEscDir(SDRESC_HORZ);
193 : 0 : break;
194 : : case drawing::EscapeDirection_VERTICAL:
195 : 0 : rSdrGlue.SetEscDir(SDRESC_VERT);
196 : 0 : break;
197 : : // case drawing::EscapeDirection_SMART:
198 : : default:
199 : 0 : rSdrGlue.SetEscDir(SDRESC_SMART);
200 : 0 : break;
201 : : }
202 : 0 : }
203 : :
204 : 68 : SvxUnoGluePointAccess::SvxUnoGluePointAccess( SdrObject* pObject ) throw()
205 [ + - ]: 68 : : mpObject( pObject )
206 : : {
207 : 68 : }
208 : :
209 [ + - ]: 68 : SvxUnoGluePointAccess::~SvxUnoGluePointAccess() throw()
210 : : {
211 [ - + ]: 136 : }
212 : :
213 : : // XIdentifierContainer
214 : 0 : sal_Int32 SAL_CALL SvxUnoGluePointAccess::insert( const uno::Any& aElement ) throw (lang::IllegalArgumentException, lang::WrappedTargetException, uno::RuntimeException)
215 : : {
216 [ # # ]: 0 : if( mpObject.is() )
217 : : {
218 : 0 : SdrGluePointList* pList = mpObject->ForceGluePointList();
219 [ # # ]: 0 : if( pList )
220 : : {
221 : : // second, insert the new glue point
222 : 0 : drawing::GluePoint2 aUnoGlue;
223 : :
224 [ # # ][ # # ]: 0 : if( aElement >>= aUnoGlue )
225 : : {
226 : 0 : SdrGluePoint aSdrGlue;
227 : 0 : convert( aUnoGlue, aSdrGlue );
228 [ # # ]: 0 : sal_uInt16 nId = pList->Insert( aSdrGlue );
229 : :
230 : : // only repaint, no objectchange
231 [ # # ]: 0 : mpObject->ActionChanged();
232 : : // mpObject->BroadcastObjectChange();
233 : :
234 [ # # ]: 0 : return (sal_Int32)((*pList)[nId].GetId() + NON_USER_DEFINED_GLUE_POINTS) - 1;
235 : : }
236 : :
237 [ # # ]: 0 : throw lang::IllegalArgumentException();
238 : : }
239 : : }
240 : :
241 : 0 : return -1;
242 : : }
243 : :
244 : 0 : void SAL_CALL SvxUnoGluePointAccess::removeByIdentifier( sal_Int32 Identifier ) throw (container::NoSuchElementException, lang::WrappedTargetException, uno::RuntimeException)
245 : : {
246 [ # # ][ # # ]: 0 : if( mpObject.is() && ( Identifier >= NON_USER_DEFINED_GLUE_POINTS ))
[ # # ]
247 : : {
248 : 0 : const sal_uInt16 nId = (sal_uInt16)(Identifier - NON_USER_DEFINED_GLUE_POINTS) + 1;
249 : :
250 : 0 : SdrGluePointList* pList = const_cast<SdrGluePointList*>(mpObject->GetGluePointList());
251 [ # # ]: 0 : const sal_uInt16 nCount = pList ? pList->GetCount() : 0;
252 : : sal_uInt16 i;
253 : :
254 [ # # ]: 0 : for( i = 0; i < nCount; i++ )
255 : : {
256 [ # # ]: 0 : if( (*pList)[i].GetId() == nId )
257 : : {
258 : 0 : pList->Delete( i );
259 : :
260 : : // only repaint, no objectchange
261 : 0 : mpObject->ActionChanged();
262 : : // mpObject->BroadcastObjectChange();
263 : :
264 : 0 : return;
265 : : }
266 : : }
267 : : }
268 : :
269 [ # # ]: 0 : throw container::NoSuchElementException();
270 : : }
271 : :
272 : : // XIdentifierReplace
273 : 0 : void SAL_CALL SvxUnoGluePointAccess::replaceByIdentifer( sal_Int32 Identifier, const uno::Any& aElement ) throw (lang::IllegalArgumentException, container::NoSuchElementException, lang::WrappedTargetException, uno::RuntimeException)
274 : : {
275 [ # # ][ # # ]: 0 : if( mpObject.is() && mpObject->IsNode() )
[ # # ]
276 : : {
277 : 0 : struct drawing::GluePoint2 aGluePoint;
278 [ # # ][ # # ]: 0 : if( (Identifier < NON_USER_DEFINED_GLUE_POINTS) || !(aElement >>= aGluePoint))
[ # # ][ # # ]
279 [ # # ]: 0 : throw lang::IllegalArgumentException();
280 : :
281 : 0 : const sal_uInt16 nId = (sal_uInt16)( Identifier - NON_USER_DEFINED_GLUE_POINTS ) + 1;
282 : :
283 [ # # ]: 0 : SdrGluePointList* pList = const_cast< SdrGluePointList* >( mpObject->GetGluePointList() );
284 [ # # ]: 0 : const sal_uInt16 nCount = pList ? pList->GetCount() : 0;
285 : : sal_uInt16 i;
286 [ # # ]: 0 : for( i = 0; i < nCount; i++ )
287 : : {
288 [ # # ][ # # ]: 0 : if( (*pList)[i].GetId() == nId )
289 : : {
290 : : // change the glue point
291 [ # # ]: 0 : SdrGluePoint& rTempPoint = (*pList)[i];
292 : 0 : convert( aGluePoint, rTempPoint );
293 : :
294 : : // only repaint, no objectchange
295 [ # # ]: 0 : mpObject->ActionChanged();
296 : : // mpObject->BroadcastObjectChange();
297 : :
298 : 0 : return;
299 : : }
300 : : }
301 : :
302 [ # # ]: 0 : throw container::NoSuchElementException();
303 : : }
304 : : }
305 : :
306 : : // XIdentifierAccess
307 : 272 : uno::Any SAL_CALL SvxUnoGluePointAccess::getByIdentifier( sal_Int32 Identifier ) throw (container::NoSuchElementException, lang::WrappedTargetException, uno::RuntimeException)
308 : : {
309 [ + - ][ + - ]: 272 : if( mpObject.is() && mpObject->IsNode() )
[ + - ]
310 : : {
311 : 272 : struct drawing::GluePoint2 aGluePoint;
312 : :
313 [ + - ]: 272 : if( Identifier < NON_USER_DEFINED_GLUE_POINTS ) // default glue point?
314 : : {
315 [ + - ]: 272 : SdrGluePoint aTempPoint = mpObject->GetVertexGluePoint( (sal_uInt16)Identifier );
316 : 272 : aGluePoint.IsUserDefined = sal_False;
317 : 272 : convert( aTempPoint, aGluePoint );
318 [ + - ]: 272 : return uno::makeAny( aGluePoint );
319 : : }
320 : : else
321 : : {
322 : 0 : const sal_uInt16 nId = (sal_uInt16)( Identifier - NON_USER_DEFINED_GLUE_POINTS ) + 1;
323 : :
324 [ # # ]: 0 : const SdrGluePointList* pList = mpObject->GetGluePointList();
325 [ # # ]: 0 : const sal_uInt16 nCount = pList ? pList->GetCount() : 0;
326 [ # # ]: 272 : for( sal_uInt16 i = 0; i < nCount; i++ )
327 : : {
328 [ # # ]: 0 : const SdrGluePoint& rTempPoint = (*pList)[i];
329 [ # # ]: 0 : if( rTempPoint.GetId() == nId )
330 : : {
331 : : // #i38892#
332 [ # # ]: 0 : if(rTempPoint.IsUserDefined())
333 : : {
334 : 0 : aGluePoint.IsUserDefined = sal_True;
335 : : }
336 : :
337 : 0 : convert( rTempPoint, aGluePoint );
338 [ # # ]: 0 : return uno::makeAny( aGluePoint );
339 : : }
340 : : }
341 : : }
342 : : }
343 : :
344 [ # # ]: 272 : throw lang::IndexOutOfBoundsException();
345 : : }
346 : :
347 : 68 : uno::Sequence< sal_Int32 > SAL_CALL SvxUnoGluePointAccess::getIdentifiers() throw (uno::RuntimeException)
348 : : {
349 [ + - ]: 68 : if( mpObject.is() )
350 : : {
351 [ + - ]: 68 : const SdrGluePointList* pList = mpObject->GetGluePointList();
352 [ - + ]: 68 : const sal_uInt16 nCount = pList ? pList->GetCount() : 0;
353 : :
354 : : sal_uInt16 i;
355 : :
356 [ + - ]: 68 : uno::Sequence< sal_Int32 > aIdSequence( nCount + NON_USER_DEFINED_GLUE_POINTS );
357 [ + - ]: 68 : sal_Int32 *pIdentifier = aIdSequence.getArray();
358 : :
359 [ + + ]: 340 : for( i = 0; i < NON_USER_DEFINED_GLUE_POINTS; i++ )
360 : 272 : *pIdentifier++ = (sal_Int32)i;
361 : :
362 [ - + ]: 68 : for( i = 0; i < nCount; i++ )
363 [ # # ]: 0 : *pIdentifier++ = (sal_Int32) ( (*pList)[i].GetId() + NON_USER_DEFINED_GLUE_POINTS ) - 1;
364 : :
365 [ + - ][ + - ]: 68 : return aIdSequence;
366 : : }
367 : : else
368 : : {
369 [ # # ]: 0 : uno::Sequence< sal_Int32 > aEmpty;
370 [ # # ][ # # ]: 68 : return aEmpty;
371 : : }
372 : : }
373 : :
374 : : /* deprecated */
375 : :
376 : : // XIndexContainer
377 : 0 : void SAL_CALL SvxUnoGluePointAccess::insertByIndex( sal_Int32, const uno::Any& Element )
378 : : throw(lang::IllegalArgumentException, lang::IndexOutOfBoundsException,
379 : : lang::WrappedTargetException, uno::RuntimeException)
380 : : {
381 [ # # ]: 0 : if( mpObject.is() )
382 : : {
383 : 0 : SdrGluePointList* pList = mpObject->ForceGluePointList();
384 [ # # ]: 0 : if( pList )
385 : : {
386 : 0 : SdrGluePoint aSdrGlue;
387 : 0 : drawing::GluePoint2 aUnoGlue;
388 : :
389 [ # # ][ # # ]: 0 : if( Element >>= aUnoGlue )
390 : : {
391 : 0 : convert( aUnoGlue, aSdrGlue );
392 [ # # ]: 0 : pList->Insert( aSdrGlue );
393 : :
394 : : // only repaint, no objectchange
395 [ # # ]: 0 : mpObject->ActionChanged();
396 : : // mpObject->BroadcastObjectChange();
397 : :
398 : 0 : return;
399 : : }
400 : :
401 [ # # ]: 0 : throw lang::IllegalArgumentException();
402 : : }
403 : : }
404 : :
405 [ # # ]: 0 : throw lang::IndexOutOfBoundsException();
406 : : }
407 : :
408 : 0 : void SAL_CALL SvxUnoGluePointAccess::removeByIndex( sal_Int32 Index )
409 : : throw(lang::IndexOutOfBoundsException, lang::WrappedTargetException, uno::RuntimeException)
410 : : {
411 [ # # ]: 0 : if( mpObject.is() )
412 : : {
413 : 0 : SdrGluePointList* pList = mpObject->ForceGluePointList();
414 [ # # ]: 0 : if( pList )
415 : : {
416 : 0 : Index -= 4;
417 [ # # ][ # # ]: 0 : if( Index >= 0 && Index < pList->GetCount() )
[ # # ]
418 : : {
419 : 0 : pList->Delete( (sal_uInt16)Index );
420 : :
421 : : // only repaint, no objectchange
422 : 0 : mpObject->ActionChanged();
423 : : // mpObject->BroadcastObjectChange();
424 : :
425 : 0 : return;
426 : : }
427 : : }
428 : : }
429 : :
430 [ # # ]: 0 : throw lang::IndexOutOfBoundsException();
431 : : }
432 : :
433 : : // XIndexReplace
434 : 0 : void SAL_CALL SvxUnoGluePointAccess::replaceByIndex( sal_Int32 Index, const uno::Any& Element )
435 : : throw(lang::IllegalArgumentException, lang::IndexOutOfBoundsException, lang::WrappedTargetException,
436 : : uno::RuntimeException)
437 : : {
438 : 0 : drawing::GluePoint2 aUnoGlue;
439 [ # # ][ # # ]: 0 : if(!(Element >>= aUnoGlue))
440 [ # # ]: 0 : throw lang::IllegalArgumentException();
441 : :
442 : 0 : Index -= 4;
443 [ # # ][ # # ]: 0 : if( mpObject.is() && Index >= 0 )
[ # # ]
444 : : {
445 [ # # ]: 0 : SdrGluePointList* pList = const_cast< SdrGluePointList* >( mpObject->GetGluePointList() );
446 [ # # ][ # # ]: 0 : if( pList && Index < pList->GetCount() )
[ # # ]
447 : : {
448 [ # # ]: 0 : SdrGluePoint& rGlue = (*pList)[(sal_uInt16)Index];
449 : 0 : convert( aUnoGlue, rGlue );
450 : :
451 : : // only repaint, no objectchange
452 [ # # ]: 0 : mpObject->ActionChanged();
453 : : // mpObject->BroadcastObjectChange();
454 : : }
455 : : }
456 : :
457 [ # # ]: 0 : throw lang::IndexOutOfBoundsException();
458 : : }
459 : :
460 : : // XIndexAccess
461 : 0 : sal_Int32 SAL_CALL SvxUnoGluePointAccess::getCount()
462 : : throw(uno::RuntimeException)
463 : : {
464 : 0 : sal_Int32 nCount = 0;
465 [ # # ]: 0 : if( mpObject.is() )
466 : : {
467 : : // each node has a default of 4 glue points
468 : : // and any number of user defined glue points
469 [ # # ]: 0 : if( mpObject->IsNode() )
470 : : {
471 : 0 : nCount += 4;
472 : :
473 : 0 : const SdrGluePointList* pList = mpObject->GetGluePointList();
474 [ # # ]: 0 : if( pList )
475 : 0 : nCount += pList->GetCount();
476 : : }
477 : : }
478 : :
479 : 0 : return nCount;
480 : : }
481 : :
482 : 0 : uno::Any SAL_CALL SvxUnoGluePointAccess::getByIndex( sal_Int32 Index )
483 : : throw(lang::IndexOutOfBoundsException, lang::WrappedTargetException, uno::RuntimeException)
484 : : {
485 [ # # ][ # # ]: 0 : if( Index >= 0 && mpObject.is() && mpObject->IsNode() )
[ # # ][ # # ]
486 : : {
487 : 0 : struct drawing::GluePoint2 aGluePoint;
488 : :
489 [ # # ]: 0 : if( Index < 4 ) // default glue point?
490 : : {
491 [ # # ]: 0 : SdrGluePoint aTempPoint = mpObject->GetVertexGluePoint( (sal_uInt16)Index );
492 : 0 : aGluePoint.IsUserDefined = sal_False;
493 : 0 : convert( aTempPoint, aGluePoint );
494 : 0 : uno::Any aAny;
495 [ # # ]: 0 : aAny <<= aGluePoint;
496 : 0 : return aAny;
497 : : }
498 : : else
499 : : {
500 : 0 : Index -= 4;
501 [ # # ]: 0 : const SdrGluePointList* pList = mpObject->GetGluePointList();
502 [ # # ][ # # ]: 0 : if( pList && Index < pList->GetCount() )
[ # # ]
503 : : {
504 [ # # ]: 0 : const SdrGluePoint& rTempPoint = (*pList)[(sal_uInt16)Index];
505 : 0 : aGluePoint.IsUserDefined = sal_True;
506 : 0 : convert( rTempPoint, aGluePoint );
507 : 0 : uno::Any aAny;
508 [ # # ]: 0 : aAny <<= aGluePoint;
509 : 0 : return aAny;
510 : : }
511 : : }
512 : : }
513 : :
514 [ # # ]: 0 : throw lang::IndexOutOfBoundsException();
515 : : }
516 : :
517 : : // XElementAccess
518 : 0 : uno::Type SAL_CALL SvxUnoGluePointAccess::getElementType()
519 : : throw( uno::RuntimeException)
520 : : {
521 : 0 : return ::getCppuType((const struct drawing::GluePoint2*)0);
522 : : }
523 : :
524 : 0 : sal_Bool SAL_CALL SvxUnoGluePointAccess::hasElements()
525 : : throw( uno::RuntimeException)
526 : : {
527 [ # # ][ # # ]: 0 : return mpObject.is() && mpObject->IsNode();
528 : : }
529 : :
530 : : /**
531 : : * Create a SvxUnoGluePointAccess
532 : : */
533 : 68 : uno::Reference< uno::XInterface > SAL_CALL SvxUnoGluePointAccess_createInstance( SdrObject* pObject )
534 : : {
535 : 68 : return *new SvxUnoGluePointAccess(pObject);
536 : : }
537 : :
538 : : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|