Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "tp_SeriesToAxis.hxx"
21 : #include "tp_SeriesToAxis.hrc"
22 :
23 : #include "ResId.hxx"
24 : #include "chartview/ChartSfxItemIds.hxx"
25 : #include "NoWarningThisInCTOR.hxx"
26 :
27 : // header for class SfxBoolItem
28 : #include <svl/eitem.hxx>
29 : // header for SfxInt32Item
30 : #include <svl/intitem.hxx>
31 : //SfxIntegerListItem
32 : #include <svl/ilstitem.hxx>
33 : #include <svtools/controldims.hrc>
34 :
35 : #include <com/sun/star/chart/MissingValueTreatment.hpp>
36 :
37 : //.............................................................................
38 : namespace chart
39 : {
40 : //.............................................................................
41 :
42 0 : SchOptionTabPage::SchOptionTabPage(Window* pWindow,const SfxItemSet& rInAttrs) :
43 : SfxTabPage(pWindow, SchResId(TP_OPTIONS), rInAttrs),
44 : aGrpAxis(this, SchResId(GRP_OPT_AXIS)),
45 : aRbtAxis1(this,SchResId(RBT_OPT_AXIS_1)),
46 : aRbtAxis2(this,SchResId(RBT_OPT_AXIS_2)),
47 :
48 : aGrpBar(this, SchResId(GB_BAR)),
49 : aFTGap(this,SchResId(FT_GAP)),
50 : aMTGap(this,SchResId(MT_GAP)),
51 : aFTOverlap(this,SchResId(FT_OVERLAP)),
52 : aMTOverlap(this,SchResId(MT_OVERLAP)),
53 : aCBConnect(this,SchResId(CB_CONNECTOR)),
54 : aCBAxisSideBySide(this,SchResId(CB_BARS_SIDE_BY_SIDE)),
55 : m_aFL_PlotOptions(this,SchResId(FL_PLOT_OPTIONS)),
56 : m_aFT_MissingValues(this,SchResId(FT_MISSING_VALUES)),
57 : m_aRB_DontPaint(this,SchResId(RB_DONT_PAINT)),
58 : m_aRB_AssumeZero(this,SchResId(RB_ASSUME_ZERO)),
59 : m_aRB_ContinueLine(this,SchResId(RB_CONTINUE_LINE)),
60 : m_aCBIncludeHiddenCells(this,SchResId(CB_INCLUDE_HIDDEN_CELLS)),
61 : m_bProvidesSecondaryYAxis(true),
62 0 : m_bProvidesOverlapAndGapWidth(false)
63 : {
64 0 : FreeResource();
65 :
66 0 : aRbtAxis1.SetClickHdl( LINK( this, SchOptionTabPage, EnableHdl ));
67 0 : aRbtAxis2.SetClickHdl( LINK( this, SchOptionTabPage, EnableHdl ));
68 0 : }
69 :
70 0 : SchOptionTabPage::~SchOptionTabPage()
71 : {
72 0 : }
73 :
74 0 : IMPL_LINK_NOARG(SchOptionTabPage, EnableHdl)
75 : {
76 0 : if( m_nAllSeriesAxisIndex == 0 )
77 0 : aCBAxisSideBySide.Enable( aRbtAxis2.IsChecked());
78 0 : else if( m_nAllSeriesAxisIndex == 1 )
79 0 : aCBAxisSideBySide.Enable( aRbtAxis1.IsChecked());
80 :
81 0 : return 0;
82 : }
83 :
84 0 : SfxTabPage* SchOptionTabPage::Create(Window* pWindow,const SfxItemSet& rOutAttrs)
85 : {
86 0 : return new SchOptionTabPage(pWindow, rOutAttrs);
87 : }
88 :
89 0 : sal_Bool SchOptionTabPage::FillItemSet(SfxItemSet& rOutAttrs)
90 : {
91 0 : if(aRbtAxis2.IsChecked())
92 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_AXIS,CHART_AXIS_SECONDARY_Y));
93 : else
94 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_AXIS,CHART_AXIS_PRIMARY_Y));
95 :
96 0 : if(aMTGap.IsVisible())
97 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_BAR_GAPWIDTH,static_cast< sal_Int32 >( aMTGap.GetValue())));
98 :
99 0 : if(aMTOverlap.IsVisible())
100 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_BAR_OVERLAP,static_cast< sal_Int32 >( aMTOverlap.GetValue())));
101 :
102 0 : if(aCBConnect.IsVisible())
103 0 : rOutAttrs.Put(SfxBoolItem(SCHATTR_BAR_CONNECT,aCBConnect.IsChecked()));
104 :
105 : // model property is "group bars per axis", UI feature is the other way
106 : // round: "show bars side by side"
107 0 : if(aCBAxisSideBySide.IsVisible())
108 0 : rOutAttrs.Put(SfxBoolItem(SCHATTR_GROUP_BARS_PER_AXIS, ! aCBAxisSideBySide.IsChecked()));
109 :
110 0 : if(m_aRB_DontPaint.IsChecked())
111 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_MISSING_VALUE_TREATMENT,::com::sun::star::chart::MissingValueTreatment::LEAVE_GAP));
112 0 : else if(m_aRB_AssumeZero.IsChecked())
113 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_MISSING_VALUE_TREATMENT,::com::sun::star::chart::MissingValueTreatment::USE_ZERO));
114 0 : else if(m_aRB_ContinueLine.IsChecked())
115 0 : rOutAttrs.Put(SfxInt32Item(SCHATTR_MISSING_VALUE_TREATMENT,::com::sun::star::chart::MissingValueTreatment::CONTINUE));
116 :
117 0 : if (m_aCBIncludeHiddenCells.IsVisible())
118 0 : rOutAttrs.Put(SfxBoolItem(SCHATTR_INCLUDE_HIDDEN_CELLS, m_aCBIncludeHiddenCells.IsChecked()));
119 :
120 0 : return sal_True;
121 : }
122 :
123 0 : void SchOptionTabPage::Reset(const SfxItemSet& rInAttrs)
124 : {
125 0 : const SfxPoolItem *pPoolItem = NULL;
126 :
127 0 : aRbtAxis1.Check(sal_True);
128 0 : aRbtAxis2.Check(sal_False);
129 0 : if (rInAttrs.GetItemState(SCHATTR_AXIS,sal_True, &pPoolItem) == SFX_ITEM_SET)
130 : {
131 0 : long nVal=((const SfxInt32Item*)pPoolItem)->GetValue();
132 0 : if(nVal==CHART_AXIS_SECONDARY_Y)
133 : {
134 0 : aRbtAxis2.Check(sal_True);
135 0 : aRbtAxis1.Check(sal_False);
136 : }
137 : }
138 :
139 : long nTmp;
140 0 : if (rInAttrs.GetItemState(SCHATTR_BAR_GAPWIDTH, sal_True, &pPoolItem) == SFX_ITEM_SET)
141 : {
142 0 : nTmp = (long)((const SfxInt32Item*)pPoolItem)->GetValue();
143 0 : aMTGap.SetValue(nTmp);
144 : }
145 :
146 0 : if (rInAttrs.GetItemState(SCHATTR_BAR_OVERLAP, sal_True, &pPoolItem) == SFX_ITEM_SET)
147 : {
148 0 : nTmp = (long)((const SfxInt32Item*)pPoolItem)->GetValue();
149 0 : aMTOverlap.SetValue(nTmp);
150 : }
151 :
152 0 : if (rInAttrs.GetItemState(SCHATTR_BAR_CONNECT, sal_True, &pPoolItem) == SFX_ITEM_SET)
153 : {
154 0 : sal_Bool bCheck = static_cast< const SfxBoolItem * >( pPoolItem )->GetValue();
155 0 : aCBConnect.Check(bCheck);
156 : }
157 :
158 0 : if (rInAttrs.GetItemState(SCHATTR_AXIS_FOR_ALL_SERIES, sal_True, &pPoolItem) == SFX_ITEM_SET)
159 : {
160 0 : m_nAllSeriesAxisIndex = static_cast< const SfxInt32Item * >( pPoolItem )->GetValue();
161 0 : aCBAxisSideBySide.Disable();
162 : }
163 0 : if (rInAttrs.GetItemState(SCHATTR_GROUP_BARS_PER_AXIS, sal_True, &pPoolItem) == SFX_ITEM_SET)
164 : {
165 : // model property is "group bars per axis", UI feature is the other way
166 : // round: "show bars side by side"
167 0 : sal_Bool bCheck = ! static_cast< const SfxBoolItem * >( pPoolItem )->GetValue();
168 0 : aCBAxisSideBySide.Check( bCheck );
169 : }
170 : else
171 : {
172 0 : aCBAxisSideBySide.Show(sal_False);
173 : }
174 :
175 :
176 : //missing value treatment
177 : {
178 0 : ::com::sun::star::uno::Sequence < sal_Int32 > aMissingValueTreatments;
179 0 : if( rInAttrs.GetItemState(SCHATTR_AVAILABLE_MISSING_VALUE_TREATMENTS, sal_True, &pPoolItem) == SFX_ITEM_SET )
180 0 : aMissingValueTreatments =((const SfxIntegerListItem*)pPoolItem)->GetConstSequence();
181 :
182 0 : if ( aMissingValueTreatments.getLength()>1 && rInAttrs.GetItemState(SCHATTR_MISSING_VALUE_TREATMENT,sal_True, &pPoolItem) == SFX_ITEM_SET)
183 : {
184 0 : m_aRB_DontPaint.Enable(sal_False);
185 0 : m_aRB_AssumeZero.Enable(sal_False);
186 0 : m_aRB_ContinueLine.Enable(sal_False);
187 :
188 0 : for( sal_Int32 nN =0; nN<aMissingValueTreatments.getLength(); nN++ )
189 : {
190 0 : sal_Int32 nVal = aMissingValueTreatments[nN];
191 0 : if(nVal==::com::sun::star::chart::MissingValueTreatment::LEAVE_GAP)
192 0 : m_aRB_DontPaint.Enable(sal_True);
193 0 : else if(nVal==::com::sun::star::chart::MissingValueTreatment::USE_ZERO)
194 0 : m_aRB_AssumeZero.Enable(sal_True);
195 0 : else if(nVal==::com::sun::star::chart::MissingValueTreatment::CONTINUE)
196 0 : m_aRB_ContinueLine.Enable(sal_True);
197 : }
198 :
199 0 : long nVal=((const SfxInt32Item*)pPoolItem)->GetValue();
200 0 : if(nVal==::com::sun::star::chart::MissingValueTreatment::LEAVE_GAP)
201 0 : m_aRB_DontPaint.Check(sal_True);
202 0 : else if(nVal==::com::sun::star::chart::MissingValueTreatment::USE_ZERO)
203 0 : m_aRB_AssumeZero.Check(sal_True);
204 0 : else if(nVal==::com::sun::star::chart::MissingValueTreatment::CONTINUE)
205 0 : m_aRB_ContinueLine.Check(sal_True);
206 : }
207 : else
208 : {
209 0 : m_aFT_MissingValues.Show(sal_False);
210 0 : m_aRB_DontPaint.Show(sal_False);
211 0 : m_aRB_AssumeZero.Show(sal_False);
212 0 : m_aRB_ContinueLine.Show(sal_False);
213 0 : }
214 : }
215 :
216 : // Include hidden cells
217 0 : if (rInAttrs.GetItemState(SCHATTR_INCLUDE_HIDDEN_CELLS, sal_True, &pPoolItem) == SFX_ITEM_SET)
218 : {
219 0 : bool bVal = static_cast<const SfxBoolItem*>(pPoolItem)->GetValue();
220 0 : m_aCBIncludeHiddenCells.Check(bVal);
221 : }
222 : else
223 : {
224 0 : m_aCBIncludeHiddenCells.Show(sal_False);
225 0 : if(!m_aFT_MissingValues.IsVisible())
226 0 : m_aFL_PlotOptions.Show(sal_False);
227 : }
228 :
229 0 : AdaptControlPositionsAndVisibility();
230 0 : }
231 :
232 0 : void SchOptionTabPage::Init( bool bProvidesSecondaryYAxis, bool bProvidesOverlapAndGapWidth, bool bProvidesBarConnectors )
233 : {
234 0 : m_bProvidesSecondaryYAxis = bProvidesSecondaryYAxis;
235 0 : m_bProvidesOverlapAndGapWidth = bProvidesOverlapAndGapWidth;
236 0 : m_bProvidesBarConnectors = bProvidesBarConnectors;
237 :
238 0 : AdaptControlPositionsAndVisibility();
239 0 : }
240 :
241 0 : void lcl_offsetControl(Control& rCtrl, long nXOffset, long nYOffset )
242 : {
243 0 : Point aPos = rCtrl.GetPosPixel();
244 0 : rCtrl.SetPosPixel( Point(aPos.getX() + nXOffset, aPos.getY() + nYOffset) );
245 0 : }
246 :
247 0 : void lcl_optimzeRadioButtonSize( RadioButton& rCtrl )
248 : {
249 0 : rCtrl.SetSizePixel( rCtrl.CalcMinimumSize() );
250 0 : }
251 :
252 0 : void SchOptionTabPage::AdaptControlPositionsAndVisibility()
253 : {
254 0 : aRbtAxis1.Show(m_bProvidesSecondaryYAxis);
255 0 : aRbtAxis2.Show(m_bProvidesSecondaryYAxis);
256 0 : aGrpAxis.Show(m_bProvidesSecondaryYAxis);
257 :
258 0 : aMTGap.Show(m_bProvidesOverlapAndGapWidth);
259 0 : aFTGap.Show(m_bProvidesOverlapAndGapWidth);
260 :
261 0 : aMTOverlap.Show(m_bProvidesOverlapAndGapWidth);
262 0 : aFTOverlap.Show(m_bProvidesOverlapAndGapWidth);
263 :
264 0 : aCBConnect.Show(m_bProvidesBarConnectors);
265 :
266 0 : if( !aMTGap.IsVisible() && !aMTOverlap.IsVisible() )
267 : {
268 0 : aGrpBar.Show(sal_False);
269 0 : Point aPos;
270 0 : if( !aRbtAxis1.IsVisible() && !aRbtAxis2.IsVisible() )
271 0 : aPos = aGrpAxis.GetPosPixel();
272 : else
273 0 : aPos = aGrpBar.GetPosPixel();
274 :
275 0 : long nYOffset = aPos.getY() - m_aFL_PlotOptions.GetPosPixel().getY();
276 0 : lcl_offsetControl(m_aFL_PlotOptions, 0, nYOffset);
277 0 : lcl_offsetControl(m_aFT_MissingValues, 0, nYOffset);
278 0 : lcl_offsetControl(m_aRB_DontPaint, 0, nYOffset);
279 0 : lcl_offsetControl(m_aRB_AssumeZero, 0, nYOffset);
280 0 : lcl_offsetControl(m_aRB_ContinueLine, 0, nYOffset);
281 0 : lcl_offsetControl(m_aCBIncludeHiddenCells, 0, nYOffset);
282 : }
283 :
284 0 : m_aFT_MissingValues.SetSizePixel( m_aFT_MissingValues.CalcMinimumSize() );
285 0 : lcl_optimzeRadioButtonSize( m_aRB_DontPaint );
286 0 : lcl_optimzeRadioButtonSize( m_aRB_AssumeZero );
287 0 : lcl_optimzeRadioButtonSize( m_aRB_ContinueLine );
288 :
289 0 : Size aControlDistance( m_aFT_MissingValues.LogicToPixel( Size(RSC_SP_CTRL_DESC_X,RSC_SP_CTRL_GROUP_Y), MapMode(MAP_APPFONT) ) );
290 0 : long nXOffset = m_aFT_MissingValues.GetPosPixel().getX() + m_aFT_MissingValues.GetSizePixel().getWidth() + aControlDistance.getWidth() - m_aRB_DontPaint.GetPosPixel().getX();
291 0 : lcl_offsetControl(m_aRB_DontPaint, nXOffset, 0);
292 0 : lcl_offsetControl(m_aRB_AssumeZero, nXOffset, 0);
293 0 : lcl_offsetControl(m_aRB_ContinueLine, nXOffset, 0);
294 :
295 0 : if( !m_aFT_MissingValues.IsVisible() )
296 : {
297 : //for example for stock charts
298 0 : m_aCBIncludeHiddenCells.SetPosPixel( m_aFT_MissingValues.GetPosPixel() );
299 : }
300 0 : }
301 : //.............................................................................
302 6 : } //namespace chart
303 : //.............................................................................
304 :
305 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
