Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <hintids.hxx>
21 :
22 : #include <vcl/graph.hxx>
23 : #include <sot/formats.hxx>
24 : #include <sot/storage.hxx>
25 : #include <unotools/pathoptions.hxx>
26 : #include <sfx2/dispatch.hxx>
27 : #include <sfx2/viewsh.hxx>
28 : #include <svx/xexch.hxx>
29 : #include <svx/xflasit.hxx>
30 : #include <svx/xfillit0.hxx>
31 : #include <svx/xflclit.hxx>
32 : #include <editeng/brshitem.hxx>
33 : #include <svx/svdocapt.hxx>
34 : #include <svx/svdouno.hxx>
35 : #include <svx/xfillit.hxx>
36 : #include <svx/svdpage.hxx>
37 : #include <svx/svdogrp.hxx>
38 : #include <svx/xoutbmp.hxx>
39 : #include <svx/svdoole2.hxx>
40 : #include <svx/fmmodel.hxx>
41 : #include <svx/unomodel.hxx>
42 : #include <svx/svditer.hxx> // #i50824#
43 : #include <svx/svdograf.hxx>
44 : #include <unotools/streamwrap.hxx>
45 : #include <fmtanchr.hxx>
46 : #include <fmtcntnt.hxx>
47 : #include <fmtornt.hxx>
48 : #include <fmtflcnt.hxx>
49 : #include <frmfmt.hxx>
50 : #include <docary.hxx>
51 : #include <txtfrm.hxx>
52 : #include <txtflcnt.hxx>
53 : #include <fesh.hxx>
54 : #include <doc.hxx>
55 : #include <IDocumentUndoRedo.hxx>
56 : #include <rootfrm.hxx>
57 : #include <ndtxt.hxx>
58 : #include <pam.hxx>
59 : #include <tblsel.hxx>
60 : #include <swtable.hxx>
61 : #include <flyfrm.hxx>
62 : #include <pagefrm.hxx>
63 : #include <fldbas.hxx>
64 : #include <edimp.hxx>
65 : #include <swundo.hxx>
66 : #include <viewimp.hxx>
67 : #include <dview.hxx>
68 : #include <dcontact.hxx>
69 : #include <dflyobj.hxx>
70 : #include <docsh.hxx>
71 : #include <pagedesc.hxx>
72 : #include <mvsave.hxx>
73 : #include <vcl/virdev.hxx>
74 :
75 :
76 : using namespace ::com::sun::star;
77 :
78 : /*************************************************************************
79 : |*
80 : |* SwFEShell::Copy() copy for the internal clipboard.
81 : |* Copies all selections to the clipboard.
82 : |*
83 : |*************************************************************************/
84 :
85 0 : sal_Bool SwFEShell::Copy( SwDoc* pClpDoc, const String* pNewClpTxt )
86 : {
87 : OSL_ENSURE( pClpDoc, "kein Clipboard-Dokument" );
88 :
89 0 : pClpDoc->GetIDocumentUndoRedo().DoUndo(false); // always false!
90 :
91 : // delete content if ClpDocument contains content
92 0 : SwNodeIndex aSttIdx( pClpDoc->GetNodes().GetEndOfExtras(), 2 );
93 0 : SwTxtNode* pTxtNd = aSttIdx.GetNode().GetTxtNode();
94 0 : if( !pTxtNd || pTxtNd->GetTxt().Len() ||
95 0 : aSttIdx.GetIndex()+1 != pClpDoc->GetNodes().GetEndOfContent().GetIndex() )
96 : {
97 0 : pClpDoc->GetNodes().Delete( aSttIdx,
98 0 : pClpDoc->GetNodes().GetEndOfContent().GetIndex() - aSttIdx.GetIndex() );
99 0 : pTxtNd = pClpDoc->GetNodes().MakeTxtNode( aSttIdx,
100 0 : (SwTxtFmtColl*)pClpDoc->GetDfltTxtFmtColl() );
101 0 : aSttIdx--;
102 : }
103 :
104 : // also delete surrounding FlyFrames if any
105 0 : for( sal_uInt16 n = 0; n < pClpDoc->GetSpzFrmFmts()->size(); ++n )
106 : {
107 0 : SwFlyFrmFmt* pFly = (SwFlyFrmFmt*)(*pClpDoc->GetSpzFrmFmts())[n];
108 0 : pClpDoc->DelLayoutFmt( pFly );
109 : }
110 0 : pClpDoc->GCFieldTypes(); // delete the FieldTypes
111 :
112 : // if a string was passed, copy it to the clipboard-
113 : // document. Then also the Calculator can use the internal
114 : // clipboard
115 0 : if( pNewClpTxt )
116 : {
117 0 : pTxtNd->InsertText( *pNewClpTxt, SwIndex( pTxtNd ) );
118 0 : return sal_True; // das wars.
119 : }
120 :
121 0 : pClpDoc->LockExpFlds();
122 0 : pClpDoc->SetRedlineMode_intern( nsRedlineMode_t::REDLINE_DELETE_REDLINES );
123 : sal_Bool bRet;
124 :
125 : // do we want to copy a FlyFrame?
126 0 : if( IsFrmSelected() )
127 : {
128 : // get the FlyFormat
129 0 : SwFlyFrm* pFly = FindFlyFrm();
130 0 : SwFrmFmt* pFlyFmt = pFly->GetFmt();
131 0 : SwFmtAnchor aAnchor( pFlyFmt->GetAnchor() );
132 :
133 0 : if ((FLY_AT_PARA == aAnchor.GetAnchorId()) ||
134 0 : (FLY_AT_CHAR == aAnchor.GetAnchorId()) ||
135 0 : (FLY_AT_FLY == aAnchor.GetAnchorId()) ||
136 0 : (FLY_AS_CHAR == aAnchor.GetAnchorId()))
137 : {
138 0 : SwPosition aPos( aSttIdx );
139 0 : if ( FLY_AS_CHAR == aAnchor.GetAnchorId() )
140 : {
141 0 : aPos.nContent.Assign( pTxtNd, 0 );
142 : }
143 0 : aAnchor.SetAnchor( &aPos );
144 : }
145 0 : pFlyFmt = pClpDoc->CopyLayoutFmt( *pFlyFmt, aAnchor, true, true );
146 :
147 : // assure the "RootFmt" is the first element in Spz-Array
148 : // (if necessary Flys were copied in Flys)
149 0 : SwFrmFmts& rSpzFrmFmts = *(SwFrmFmts*)pClpDoc->GetSpzFrmFmts();
150 0 : if( rSpzFrmFmts[ 0 ] != pFlyFmt )
151 : {
152 0 : SwFrmFmts::iterator it = std::find( rSpzFrmFmts.begin(), rSpzFrmFmts.end(), pFlyFmt );
153 : OSL_ENSURE( it != rSpzFrmFmts.end(), "Fly not contained in Spz-Array" );
154 :
155 0 : rSpzFrmFmts.erase( it );
156 0 : rSpzFrmFmts.insert( rSpzFrmFmts.begin(), pFlyFmt );
157 : }
158 :
159 0 : if ( FLY_AS_CHAR == aAnchor.GetAnchorId() )
160 : {
161 : // JP 13.02.99 Bug 61863: if a frameselection is passed to the
162 : // clipboard, it should be found at pasting. Therefore
163 : // the copied TextAttribut should be removed in the node
164 : // otherwise it will be recognised as TextSelektion
165 0 : const SwIndex& rIdx = pFlyFmt->GetAnchor().GetCntntAnchor()->nContent;
166 : SwTxtFlyCnt *const pTxtFly = static_cast<SwTxtFlyCnt *>(
167 : pTxtNd->GetTxtAttrForCharAt(
168 0 : rIdx.GetIndex(), RES_TXTATR_FLYCNT));
169 0 : if( pTxtFly )
170 : {
171 0 : ((SwFmtFlyCnt&)pTxtFly->GetFlyCnt()).SetFlyFmt( 0 );
172 0 : pTxtNd->EraseText( rIdx, 1 );
173 : }
174 : }
175 0 : bRet = sal_True;
176 : }
177 0 : else if ( IsObjSelected() )
178 : {
179 0 : SwPosition aPos( aSttIdx, SwIndex( pTxtNd, 0 ));
180 0 : const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
181 0 : for ( sal_uInt16 i = 0; i < rMrkList.GetMarkCount(); ++i )
182 : {
183 0 : SdrObject *pObj = rMrkList.GetMark( i )->GetMarkedSdrObj();
184 :
185 0 : if( Imp()->GetDrawView()->IsGroupEntered() ||
186 0 : ( !pObj->GetUserCall() && pObj->GetUpGroup()) )
187 : {
188 0 : SfxItemSet aSet( pClpDoc->GetAttrPool(), aFrmFmtSetRange );
189 :
190 0 : SwFmtAnchor aAnchor( FLY_AT_PARA );
191 0 : aAnchor.SetAnchor( &aPos );
192 0 : aSet.Put( aAnchor );
193 :
194 : SdrObject *const pNew =
195 0 : pClpDoc->CloneSdrObj( *pObj, false, true );
196 :
197 0 : SwPaM aTemp(aPos);
198 0 : pClpDoc->Insert(aTemp, *pNew, &aSet, NULL);
199 : }
200 : else
201 : {
202 0 : SwDrawContact *pContact = (SwDrawContact*)GetUserCall( pObj );
203 0 : SwFrmFmt *pFmt = pContact->GetFmt();
204 0 : SwFmtAnchor aAnchor( pFmt->GetAnchor() );
205 0 : if ((FLY_AT_PARA == aAnchor.GetAnchorId()) ||
206 0 : (FLY_AT_CHAR == aAnchor.GetAnchorId()) ||
207 0 : (FLY_AT_FLY == aAnchor.GetAnchorId()) ||
208 0 : (FLY_AS_CHAR == aAnchor.GetAnchorId()))
209 : {
210 0 : aAnchor.SetAnchor( &aPos );
211 : }
212 :
213 0 : pClpDoc->CopyLayoutFmt( *pFmt, aAnchor, true, true );
214 : }
215 : }
216 0 : bRet = sal_True;
217 : }
218 : else
219 0 : bRet = _CopySelToDoc( pClpDoc, 0 ); // copy the selections
220 :
221 0 : pClpDoc->SetRedlineMode_intern((RedlineMode_t)0 );
222 0 : pClpDoc->UnlockExpFlds();
223 0 : if( !pClpDoc->IsExpFldsLocked() )
224 0 : pClpDoc->UpdateExpFlds(NULL, true);
225 :
226 0 : return bRet;
227 : }
228 :
229 0 : static const Point &lcl_FindBasePos( const SwFrm *pFrm, const Point &rPt )
230 : {
231 0 : const SwFrm *pF = pFrm;
232 0 : while ( pF && !pF->Frm().IsInside( rPt ) )
233 : {
234 0 : if ( pF->IsCntntFrm() )
235 0 : pF = ((SwCntntFrm*)pF)->GetFollow();
236 : else
237 0 : pF = 0;
238 : }
239 0 : if ( pF )
240 0 : return pF->Frm().Pos();
241 : else
242 0 : return pFrm->Frm().Pos();
243 : }
244 :
245 0 : static sal_Bool lcl_SetAnchor( const SwPosition& rPos, const SwNode& rNd, SwFlyFrm* pFly,
246 : const Point& rInsPt, SwFEShell& rDestShell, SwFmtAnchor& rAnchor,
247 : Point& rNewPos, bool bCheckFlyRecur )
248 : {
249 0 : sal_Bool bRet = sal_True;
250 0 : rAnchor.SetAnchor( &rPos );
251 0 : SwCntntFrm* pTmpFrm = rNd.GetCntntNode()->getLayoutFrm( rDestShell.GetLayout(), &rInsPt, 0, sal_False );
252 0 : SwFlyFrm *pTmpFly = pTmpFrm->FindFlyFrm();
253 0 : if( pTmpFly && bCheckFlyRecur && pFly->IsUpperOf( *pTmpFly ) )
254 : {
255 0 : bRet = sal_False;
256 : }
257 0 : else if ( FLY_AT_FLY == rAnchor.GetAnchorId() )
258 : {
259 0 : if( pTmpFly )
260 : {
261 0 : const SwNodeIndex& rIdx = *pTmpFly->GetFmt()->GetCntnt().GetCntntIdx();
262 0 : SwPosition aPos( rIdx );
263 0 : rAnchor.SetAnchor( &aPos );
264 0 : rNewPos = pTmpFly->Frm().Pos();
265 : }
266 : else
267 : {
268 0 : rAnchor.SetType( FLY_AT_PAGE );
269 0 : rAnchor.SetPageNum( rDestShell.GetPageNumber( rInsPt ) );
270 0 : const SwFrm *pPg = pTmpFrm->FindPageFrm();
271 0 : rNewPos = pPg->Frm().Pos();
272 : }
273 : }
274 : else
275 0 : rNewPos = ::lcl_FindBasePos( pTmpFrm, rInsPt );
276 0 : return bRet;
277 : }
278 :
279 0 : sal_Bool SwFEShell::CopyDrawSel( SwFEShell* pDestShell, const Point& rSttPt,
280 : const Point& rInsPt, sal_Bool bIsMove, sal_Bool bSelectInsert )
281 : {
282 0 : sal_Bool bRet = sal_True;
283 :
284 : // The list should be copied, because below new objects will be selected
285 0 : const SdrMarkList aMrkList( Imp()->GetDrawView()->GetMarkedObjectList() );
286 0 : sal_uLong nMarkCount = aMrkList.GetMarkCount();
287 0 : if( !pDestShell->Imp()->GetDrawView() )
288 : // should create it now
289 0 : pDestShell->MakeDrawView();
290 0 : else if( bSelectInsert )
291 0 : pDestShell->Imp()->GetDrawView()->UnmarkAll();
292 :
293 0 : SdrPageView *pDestPgView = pDestShell->Imp()->GetPageView(),
294 0 : *pSrcPgView = Imp()->GetPageView();
295 0 : SwDrawView *pDestDrwView = pDestShell->Imp()->GetDrawView(),
296 0 : *pSrcDrwView = Imp()->GetDrawView();
297 0 : SwDoc* pDestDoc = pDestShell->GetDoc();
298 :
299 0 : Size aSiz( rInsPt.X() - rSttPt.X(), rInsPt.Y() - rSttPt.Y() );
300 0 : for( sal_uInt16 i = 0; i < nMarkCount; ++i )
301 : {
302 0 : SdrObject *pObj = aMrkList.GetMark( i )->GetMarkedSdrObj();
303 :
304 0 : SwDrawContact *pContact = (SwDrawContact*)GetUserCall( pObj );
305 0 : SwFrmFmt *pFmt = pContact->GetFmt();
306 0 : const SwFmtAnchor& rAnchor = pFmt->GetAnchor();
307 :
308 0 : bool bInsWithFmt = true;
309 :
310 0 : if( pDestDrwView->IsGroupEntered() )
311 : {
312 : // insert into the group, when it belongs to an entered group
313 : // or when the object is not anchored as a character
314 0 : if( pSrcDrwView->IsGroupEntered() ||
315 0 : (FLY_AS_CHAR != rAnchor.GetAnchorId()) )
316 :
317 : {
318 : SdrObject* pNew = pDestDoc->CloneSdrObj( *pObj, bIsMove &&
319 0 : GetDoc() == pDestDoc, false );
320 0 : pNew->NbcMove( aSiz );
321 0 : pDestDrwView->InsertObjectAtView( pNew, *pDestPgView );
322 0 : bInsWithFmt = false;
323 : }
324 : }
325 :
326 0 : if( bInsWithFmt )
327 : {
328 0 : SwFmtAnchor aAnchor( rAnchor );
329 0 : Point aNewAnch;
330 :
331 0 : if ((FLY_AT_PARA == aAnchor.GetAnchorId()) ||
332 0 : (FLY_AT_CHAR == aAnchor.GetAnchorId()) ||
333 0 : (FLY_AT_FLY == aAnchor.GetAnchorId()) ||
334 0 : (FLY_AS_CHAR == aAnchor.GetAnchorId()))
335 : {
336 0 : if ( this == pDestShell )
337 : {
338 : // same shell? Then request the position
339 : // from the passed DocumentPosition
340 0 : SwPosition aPos( *GetCrsr()->GetPoint() );
341 0 : Point aPt( rInsPt );
342 0 : aPt -= rSttPt - pObj->GetSnapRect().TopLeft();
343 0 : SwCrsrMoveState aState( MV_SETONLYTEXT );
344 0 : GetLayout()->GetCrsrOfst( &aPos, aPt, &aState );
345 : const SwNode *pNd;
346 0 : if( (pNd = &aPos.nNode.GetNode())->IsNoTxtNode() )
347 0 : bRet = sal_False;
348 : else
349 : bRet = ::lcl_SetAnchor( aPos, *pNd, 0, rInsPt,
350 0 : *pDestShell, aAnchor, aNewAnch, false );
351 : }
352 : else
353 : {
354 0 : SwPaM *pCrsr = pDestShell->GetCrsr();
355 0 : if( pCrsr->GetNode()->IsNoTxtNode() )
356 0 : bRet = sal_False;
357 : else
358 0 : bRet = ::lcl_SetAnchor( *pCrsr->GetPoint(),
359 0 : *pCrsr->GetNode(), 0, rInsPt,
360 : *pDestShell, aAnchor,
361 0 : aNewAnch, false );
362 : }
363 : }
364 0 : else if ( FLY_AT_PAGE == aAnchor.GetAnchorId() )
365 : {
366 0 : aAnchor.SetPageNum( pDestShell->GetPageNumber( rInsPt ) );
367 0 : const SwRootFrm* pTmpRoot = pDestShell->GetLayout();
368 0 : const SwFrm* pPg = pTmpRoot->GetPageAtPos( rInsPt, 0, true );
369 0 : if ( pPg )
370 0 : aNewAnch = pPg->Frm().Pos();
371 : }
372 :
373 0 : if( bRet )
374 : {
375 0 : if( pSrcDrwView->IsGroupEntered() ||
376 0 : ( !pObj->GetUserCall() && pObj->GetUpGroup()) )
377 : {
378 0 : SfxItemSet aSet( pDestDoc->GetAttrPool(),aFrmFmtSetRange);
379 0 : aSet.Put( aAnchor );
380 : SdrObject* pNew = pDestDoc->CloneSdrObj( *pObj, bIsMove &&
381 0 : GetDoc() == pDestDoc, true );
382 0 : pFmt = pDestDoc->Insert( *pDestShell->GetCrsr(),
383 0 : *pNew, &aSet, NULL );
384 : }
385 : else
386 0 : pFmt = pDestDoc->CopyLayoutFmt( *pFmt, aAnchor, true, true );
387 :
388 : // Can be 0, as Draws are not allowed in Headers/Footers
389 0 : if ( pFmt )
390 : {
391 0 : SdrObject* pNew = pFmt->FindSdrObject();
392 0 : if ( FLY_AS_CHAR != aAnchor.GetAnchorId() )
393 : {
394 0 : Point aPos( rInsPt );
395 0 : aPos -= aNewAnch;
396 0 : aPos -= rSttPt - pObj->GetSnapRect().TopLeft();
397 : // OD 2004-04-05 #i26791# - change attributes instead of
398 : // direct positioning
399 0 : pFmt->SetFmtAttr( SwFmtHoriOrient( aPos.X(), text::HoriOrientation::NONE, text::RelOrientation::FRAME ) );
400 0 : pFmt->SetFmtAttr( SwFmtVertOrient( aPos.Y(), text::VertOrientation::NONE, text::RelOrientation::FRAME ) );
401 : // #i47455# - notify draw frame format
402 : // that position attributes are already set.
403 0 : if ( pFmt->ISA(SwDrawFrmFmt) )
404 : {
405 0 : static_cast<SwDrawFrmFmt*>(pFmt)->PosAttrSet();
406 : }
407 : }
408 0 : if( bSelectInsert )
409 0 : pDestDrwView->MarkObj( pNew, pDestPgView );
410 : }
411 0 : }
412 : }
413 : }
414 :
415 0 : if ( bIsMove && bRet )
416 : {
417 0 : if( pDestShell == this )
418 : {
419 0 : const SdrMarkList aList( pSrcDrwView->GetMarkedObjectList() );
420 0 : pSrcDrwView->UnmarkAll();
421 :
422 0 : sal_uLong nMrkCnt = aMrkList.GetMarkCount();
423 : sal_uInt16 i;
424 0 : for ( i = 0; i < nMrkCnt; ++i )
425 : {
426 0 : SdrObject *pObj = aMrkList.GetMark( i )->GetMarkedSdrObj();
427 0 : pSrcDrwView->MarkObj( pObj, pSrcPgView );
428 : }
429 0 : DelSelectedObj();
430 0 : nMrkCnt = aList.GetMarkCount();
431 0 : for ( i = 0; i < nMrkCnt; ++i )
432 : {
433 0 : SdrObject *pObj = aList.GetMark( i )->GetMarkedSdrObj();
434 0 : pSrcDrwView->MarkObj( pObj, pSrcPgView );
435 0 : }
436 : }
437 : else
438 0 : DelSelectedObj();
439 : }
440 :
441 0 : return bRet;
442 : }
443 :
444 0 : sal_Bool SwFEShell::Copy( SwFEShell* pDestShell, const Point& rSttPt,
445 : const Point& rInsPt, sal_Bool bIsMove, sal_Bool bSelectInsert )
446 : {
447 0 : sal_Bool bRet = sal_False;
448 :
449 : OSL_ENSURE( pDestShell, "Copy without DestShell." );
450 : OSL_ENSURE( this == pDestShell || !pDestShell->IsObjSelected(),
451 : "Dest-Shell cannot be in Obj-Mode" );
452 :
453 0 : SET_CURR_SHELL( pDestShell );
454 :
455 0 : pDestShell->StartAllAction();
456 0 : pDestShell->GetDoc()->LockExpFlds();
457 :
458 : // Shift references
459 0 : sal_Bool bCopyIsMove = pDoc->IsCopyIsMove();
460 0 : if( bIsMove )
461 : // set a flag in Doc, handled in TextNodes
462 0 : pDoc->SetCopyIsMove( sal_True );
463 :
464 0 : RedlineMode_t eOldRedlMode = pDestShell->GetDoc()->GetRedlineMode();
465 0 : pDestShell->GetDoc()->SetRedlineMode_intern( (RedlineMode_t)(eOldRedlMode | nsRedlineMode_t::REDLINE_DELETE_REDLINES));
466 :
467 : // If there are table formulas in the area, then display the table first
468 : // so that the table formula can calculate a new value first
469 : // (individual boxes in the area are retrieved via the layout)
470 0 : SwFieldType* pTblFldTyp = pDestShell->GetDoc()->GetSysFldType( RES_TABLEFLD );
471 :
472 0 : if( IsFrmSelected() )
473 : {
474 0 : SwFlyFrm* pFly = FindFlyFrm();
475 0 : SwFrmFmt* pFlyFmt = pFly->GetFmt();
476 0 : SwFmtAnchor aAnchor( pFlyFmt->GetAnchor() );
477 0 : bRet = sal_True;
478 0 : Point aNewAnch;
479 :
480 0 : if ((FLY_AT_PARA == aAnchor.GetAnchorId()) ||
481 0 : (FLY_AT_CHAR == aAnchor.GetAnchorId()) ||
482 0 : (FLY_AT_FLY == aAnchor.GetAnchorId()) ||
483 0 : (FLY_AS_CHAR == aAnchor.GetAnchorId()))
484 : {
485 0 : if ( this == pDestShell )
486 : {
487 : // same shell? Then request the position
488 : // from the passed DocumentPosition
489 0 : SwPosition aPos( *GetCrsr()->GetPoint() );
490 0 : Point aPt( rInsPt );
491 0 : aPt -= rSttPt - pFly->Frm().Pos();
492 0 : SwCrsrMoveState aState( MV_SETONLYTEXT );
493 0 : GetLayout()->GetCrsrOfst( &aPos, aPt, &aState );
494 : const SwNode *pNd;
495 0 : if( (pNd = &aPos.nNode.GetNode())->IsNoTxtNode() )
496 0 : bRet = sal_False;
497 : else
498 : {
499 : // do not copy in itself
500 0 : const SwNodeIndex *pTmp = pFlyFmt->GetCntnt().GetCntntIdx();
501 0 : if ( aPos.nNode > *pTmp && aPos.nNode <
502 0 : pTmp->GetNode().EndOfSectionIndex() )
503 : {
504 0 : bRet = sal_False;
505 : }
506 : else
507 : bRet = ::lcl_SetAnchor( aPos, *pNd, pFly, rInsPt,
508 0 : *pDestShell, aAnchor, aNewAnch, true );
509 0 : }
510 : }
511 : else
512 : {
513 0 : const SwPaM *pCrsr = pDestShell->GetCrsr();
514 0 : if( pCrsr->GetNode()->IsNoTxtNode() )
515 0 : bRet = sal_False;
516 : else
517 0 : bRet = ::lcl_SetAnchor( *pCrsr->GetPoint(), *pCrsr->GetNode(),
518 : pFly, rInsPt, *pDestShell, aAnchor,
519 0 : aNewAnch, GetDoc() == pDestShell->GetDoc());
520 : }
521 : }
522 0 : else if ( FLY_AT_PAGE == aAnchor.GetAnchorId() )
523 : {
524 0 : aAnchor.SetPageNum( pDestShell->GetPageNumber( rInsPt ) );
525 0 : const SwRootFrm* pTmpRoot = pDestShell->GetLayout();
526 0 : const SwFrm* pPg = pTmpRoot->GetPageAtPos( rInsPt, 0, true );
527 0 : if ( pPg )
528 0 : aNewAnch = pPg->Frm().Pos();
529 : }
530 : else {
531 : OSL_ENSURE( !this, "what anchor is it?" );
532 : }
533 :
534 0 : if( bRet )
535 : {
536 0 : SwFrmFmt *pOldFmt = pFlyFmt;
537 0 : pFlyFmt = pDestShell->GetDoc()->CopyLayoutFmt( *pFlyFmt, aAnchor, true, true );
538 :
539 0 : if ( FLY_AS_CHAR != aAnchor.GetAnchorId() )
540 : {
541 0 : Point aPos( rInsPt );
542 0 : aPos -= aNewAnch;
543 0 : aPos -= rSttPt - pFly->Frm().Pos();
544 0 : pFlyFmt->SetFmtAttr( SwFmtHoriOrient( aPos.X(),text::HoriOrientation::NONE, text::RelOrientation::FRAME ) );
545 0 : pFlyFmt->SetFmtAttr( SwFmtVertOrient( aPos.Y(),text::VertOrientation::NONE, text::RelOrientation::FRAME ) );
546 : }
547 :
548 0 : const Point aPt( pDestShell->GetCrsrDocPos() );
549 :
550 0 : if( bIsMove )
551 0 : GetDoc()->DelLayoutFmt( pOldFmt );
552 :
553 : // only select if it can be shifted/copied in the same shell
554 0 : if( bSelectInsert )
555 : {
556 0 : SwFlyFrm* pFlyFrm = ((SwFlyFrmFmt*)pFlyFmt)->GetFrm( &aPt, sal_False );
557 0 : if( pFlyFrm )
558 : {
559 : //JP 12.05.98: should this be in SelectFlyFrm???
560 0 : pDestShell->Imp()->GetDrawView()->UnmarkAll();
561 0 : pDestShell->SelectFlyFrm( *pFlyFrm, sal_True );
562 : }
563 : }
564 :
565 0 : if( this != pDestShell && !pDestShell->HasShFcs() )
566 0 : pDestShell->Imp()->GetDrawView()->hideMarkHandles();
567 0 : }
568 : }
569 0 : else if ( IsObjSelected() )
570 0 : bRet = CopyDrawSel( pDestShell, rSttPt, rInsPt, bIsMove, bSelectInsert );
571 0 : else if( IsTableMode() )
572 : {
573 : // Copy parts from a table: create a table with the same
574 : // width as the original and copy the selected boxes.
575 : // Sizes will be corrected by percentage.
576 :
577 : // find boxes via the layout
578 : const SwTableNode* pTblNd;
579 0 : SwSelBoxes aBoxes;
580 0 : GetTblSel( *this, aBoxes );
581 0 : if( !aBoxes.empty() &&
582 0 : 0 != (pTblNd = aBoxes[0]->GetSttNd()->FindTableNode()) )
583 : {
584 0 : SwPosition* pDstPos = 0;
585 0 : if( this == pDestShell )
586 : {
587 : // same shell? Then create new Crsr at the
588 : // DocumentPosition passed
589 0 : pDstPos = new SwPosition( *GetCrsr()->GetPoint() );
590 0 : Point aPt( rInsPt );
591 0 : GetLayout()->GetCrsrOfst( pDstPos, aPt );
592 0 : if( !pDstPos->nNode.GetNode().IsNoTxtNode() )
593 0 : bRet = sal_True;
594 : }
595 0 : else if( !pDestShell->GetCrsr()->GetNode()->IsNoTxtNode() )
596 : {
597 0 : pDstPos = new SwPosition( *pDestShell->GetCrsr()->GetPoint() );
598 0 : bRet = sal_True;
599 : }
600 :
601 0 : if( bRet )
602 : {
603 0 : if( GetDoc() == pDestShell->GetDoc() )
604 0 : ParkTblCrsr();
605 :
606 : bRet = pDestShell->GetDoc()->InsCopyOfTbl( *pDstPos, aBoxes,0,
607 : bIsMove && this == pDestShell &&
608 0 : aBoxes.size() == pTblNd->GetTable().
609 0 : GetTabSortBoxes().size(),
610 0 : this != pDestShell );
611 :
612 0 : if( this != pDestShell )
613 0 : *pDestShell->GetCrsr()->GetPoint() = *pDstPos;
614 :
615 : // create all parked Crsr?
616 0 : if( GetDoc() == pDestShell->GetDoc() )
617 0 : GetCrsr();
618 :
619 : // JP 16.04.99: Bug 64908 - Set InsPos, to assure the parked
620 : // Cursor is positioned at the insert position
621 0 : if( this == pDestShell )
622 0 : GetCrsrDocPos() = rInsPt;
623 : }
624 0 : delete pDstPos;
625 0 : }
626 : }
627 : else
628 : {
629 0 : bRet = sal_True;
630 0 : if( this == pDestShell )
631 : {
632 : // same shell? then request the postion
633 : // at the passed document position
634 0 : SwPosition aPos( *GetCrsr()->GetPoint() );
635 0 : Point aPt( rInsPt );
636 0 : GetLayout()->GetCrsrOfst( &aPos, aPt );
637 0 : bRet = !aPos.nNode.GetNode().IsNoTxtNode();
638 : }
639 0 : else if( pDestShell->GetCrsr()->GetNode()->IsNoTxtNode() )
640 0 : bRet = sal_False;
641 :
642 0 : if( bRet )
643 0 : bRet = 0 != SwEditShell::Copy( pDestShell );
644 : }
645 :
646 0 : pDestShell->GetDoc()->SetRedlineMode_intern( eOldRedlMode );
647 0 : pDoc->SetCopyIsMove( bCopyIsMove );
648 :
649 : // have new table formules been inserted?
650 0 : if( pTblFldTyp->GetDepends() )
651 : {
652 : // finish old actions: the table frames are created and
653 : // a selection can be made
654 : sal_uInt16 nActCnt;
655 0 : for( nActCnt = 0; pDestShell->ActionPend(); ++nActCnt )
656 0 : pDestShell->EndAllAction();
657 :
658 0 : for( ; nActCnt; --nActCnt )
659 0 : pDestShell->StartAllAction();
660 : }
661 0 : pDestShell->GetDoc()->UnlockExpFlds();
662 0 : pDestShell->GetDoc()->UpdateFlds(NULL, false);
663 :
664 0 : pDestShell->EndAllAction();
665 0 : return bRet;
666 : }
667 :
668 : /*************************************************************************
669 : |*
670 : |* SwFEShell::Paste() Paste for the interal clipboard.
671 : |* Copy the content of the clipboard in the document
672 : |*
673 : |*************************************************************************/
674 :
675 : namespace {
676 : typedef boost::shared_ptr<SwPaM> PaMPtr;
677 : typedef boost::shared_ptr<SwPosition> PositionPtr;
678 : typedef std::pair< PaMPtr, PositionPtr > Insertion;
679 : }
680 :
681 0 : sal_Bool SwFEShell::Paste( SwDoc* pClpDoc, sal_Bool bIncludingPageFrames )
682 : {
683 0 : SET_CURR_SHELL( this );
684 : OSL_ENSURE( pClpDoc, "no clipboard document" );
685 0 : const sal_uInt16 nStartPageNumber = GetPhyPageNum();
686 : // then till end of the nodes array
687 0 : SwNodeIndex aIdx( pClpDoc->GetNodes().GetEndOfExtras(), 2 );
688 0 : SwPaM aCpyPam( aIdx ); //DocStart
689 :
690 : // If there are table formulas in the area, then display the table first
691 : // so that the table formula can calculate a new value first
692 : // (individual boxes in the area are retrieved via the layout)
693 0 : SwFieldType* pTblFldTyp = GetDoc()->GetSysFldType( RES_TABLEFLD );
694 :
695 0 : SwTableNode *pDestNd, *pSrcNd = aCpyPam.GetNode()->GetTableNode();
696 0 : if( !pSrcNd ) // TabellenNode ?
697 : { // nicht ueberspringen!!
698 0 : SwCntntNode* pCNd = aCpyPam.GetNode()->GetCntntNode();
699 0 : if( pCNd )
700 0 : aCpyPam.GetPoint()->nContent.Assign( pCNd, 0 );
701 0 : else if( !aCpyPam.Move( fnMoveForward, fnGoNode ))
702 0 : aCpyPam.Move( fnMoveBackward, fnGoNode );
703 : }
704 :
705 0 : aCpyPam.SetMark();
706 0 : aCpyPam.Move( fnMoveForward, fnGoDoc );
707 :
708 0 : sal_Bool bRet = sal_True, bDelTbl = sal_True;
709 0 : StartAllAction();
710 0 : GetDoc()->GetIDocumentUndoRedo().StartUndo( UNDO_INSGLOSSARY, NULL );
711 0 : GetDoc()->LockExpFlds();
712 :
713 : // When the clipboard content has been created by a rectangular selection
714 : // the pasting is more sophisticated:
715 : // every paragraph will be inserted into another position.
716 : // The first positions are given by the actual cursor ring,
717 : // if there are more text portions to insert than cursor in this ring,
718 : // the additional insert positions will be created by moving the last
719 : // cursor position into the next line (like pressing the cursor down key)
720 0 : if( pClpDoc->IsColumnSelection() && !IsTableMode() )
721 : {
722 : // Creation of the list of insert positions
723 0 : std::list< Insertion > aCopyList;
724 : // The number of text portions of the rectangular selection
725 0 : const sal_uInt32 nSelCount = aCpyPam.GetPoint()->nNode.GetIndex()
726 0 : - aCpyPam.GetMark()->nNode.GetIndex();
727 0 : sal_uInt32 nCount = nSelCount;
728 0 : SwNodeIndex aClpIdx( aIdx );
729 0 : SwPaM* pStartCursor = GetCrsr();
730 0 : SwPaM* pCurrCrsr = pStartCursor;
731 0 : sal_uInt32 nCursorCount = pStartCursor->numberOf();
732 : // If the target selection is a multi-selection, often the last and first
733 : // cursor of the ring points to identical document positions. Then
734 : // we should avoid double insertion of text portions...
735 0 : while( nCursorCount > 1 && *pCurrCrsr->GetPoint() ==
736 0 : *(dynamic_cast<SwPaM*>(pCurrCrsr->GetPrev())->GetPoint()) )
737 : {
738 0 : --nCursorCount;
739 0 : pCurrCrsr = dynamic_cast<SwPaM*>(pCurrCrsr->GetNext());
740 0 : pStartCursor = pCurrCrsr;
741 : }
742 0 : SwPosition aStartPos( *pStartCursor->GetPoint() );
743 0 : SwPosition aInsertPos( aStartPos ); // first insertion position
744 0 : bool bCompletePara = false;
745 0 : sal_uInt16 nMove = 0;
746 0 : while( nCount )
747 : {
748 0 : --nCount;
749 : OSL_ENSURE( aIdx.GetNode().GetCntntNode(), "Who filled the clipboard?!" );
750 0 : if( aIdx.GetNode().GetCntntNode() ) // robust
751 : {
752 0 : Insertion aInsertion( PaMPtr( new SwPaM( aIdx ) ),
753 0 : PositionPtr( new SwPosition( aInsertPos ) ) );
754 0 : ++aIdx;
755 0 : aInsertion.first->SetMark();
756 0 : if( pStartCursor == pCurrCrsr->GetNext() )
757 : { // Now we have to look for insertion positions...
758 0 : if( !nMove ) // Annotate the last given insert position
759 0 : aStartPos = aInsertPos;
760 0 : SwCursor aCrsr( aStartPos, 0, false);
761 : // Check if we find another insert position by moving
762 : // down the last given position
763 0 : if( aCrsr.UpDown( sal_False, ++nMove, 0, 0 ) )
764 0 : aInsertPos = *aCrsr.GetPoint();
765 : else // if there is no paragraph we have to create it
766 0 : bCompletePara = nCount > 0;
767 0 : nCursorCount = 0;
768 : }
769 : else // as long as we find more insert positions in the cursor ring
770 : { // we'll take them
771 0 : pCurrCrsr = dynamic_cast<SwPaM*>(pCurrCrsr->GetNext());
772 0 : aInsertPos = *pCurrCrsr->GetPoint();
773 0 : --nCursorCount;
774 : }
775 : // If there are no more paragraphs e.g. at the end of a document,
776 : // we insert complete paragraphs instead of text portions
777 0 : if( bCompletePara )
778 0 : aInsertion.first->GetPoint()->nNode = aIdx;
779 : else
780 0 : aInsertion.first->GetPoint()->nContent =
781 0 : aInsertion.first->GetCntntNode()->Len();
782 0 : aCopyList.push_back( aInsertion );
783 : }
784 : // If there are no text portions left but there are some more
785 : // cursor positions to fill we have to restart with the first
786 : // text portion
787 0 : if( !nCount && nCursorCount )
788 : {
789 0 : nCount = std::min( nSelCount, nCursorCount );
790 0 : aIdx = aClpIdx; // Start of clipboard content
791 : }
792 : }
793 0 : std::list< Insertion >::const_iterator pCurr = aCopyList.begin();
794 0 : std::list< Insertion >::const_iterator pEnd = aCopyList.end();
795 0 : while( pCurr != pEnd )
796 : {
797 0 : SwPosition& rInsPos = *pCurr->second;
798 0 : SwPaM& rCopy = *pCurr->first;
799 0 : const SwStartNode* pBoxNd = rInsPos.nNode.GetNode().FindTableBoxStartNode();
800 0 : if( pBoxNd && 2 == pBoxNd->EndOfSectionIndex() - pBoxNd->GetIndex() &&
801 0 : rCopy.GetPoint()->nNode != rCopy.GetMark()->nNode )
802 : {
803 : // if more than one node will be copied into a cell
804 : // the box attributes have to be removed
805 0 : GetDoc()->ClearBoxNumAttrs( rInsPos.nNode );
806 : }
807 : {
808 0 : SwNodeIndex aIndexBefore(rInsPos.nNode);
809 0 : aIndexBefore--;
810 0 : pClpDoc->CopyRange( rCopy, rInsPos, false );
811 : {
812 0 : ++aIndexBefore;
813 : SwPaM aPaM(SwPosition(aIndexBefore),
814 0 : SwPosition(rInsPos.nNode));
815 0 : aPaM.GetDoc()->MakeUniqueNumRules(aPaM);
816 0 : }
817 : }
818 0 : SaveTblBoxCntnt( &rInsPos );
819 0 : ++pCurr;
820 0 : }
821 : }
822 : else
823 : {
824 0 : FOREACHPAM_START(this)
825 :
826 0 : if( pSrcNd &&
827 0 : 0 != ( pDestNd = GetDoc()->IsIdxInTbl( PCURCRSR->GetPoint()->nNode )))
828 : {
829 0 : SwPosition aDestPos( *PCURCRSR->GetPoint() );
830 :
831 0 : bool bParkTblCrsr = false;
832 0 : const SwStartNode* pSttNd = PCURCRSR->GetNode()->FindTableBoxStartNode();
833 :
834 : // TABLE IN TABLE: copy table in table
835 : // search boxes via the layout
836 0 : SwSelBoxes aBoxes;
837 0 : if( IsTableMode() ) // table selection?
838 : {
839 0 : GetTblSel( *this, aBoxes );
840 0 : ParkTblCrsr();
841 0 : bParkTblCrsr = true;
842 : }
843 0 : else if( !PCURCRSR->HasMark() && PCURCRSR->GetNext() == PCURCRSR &&
844 0 : ( !pSrcNd->GetTable().IsTblComplex() ||
845 0 : pDestNd->GetTable().IsNewModel() ) )
846 : {
847 : // make relative table copy
848 0 : SwTableBox* pBox = pDestNd->GetTable().GetTblBox(
849 0 : pSttNd->GetIndex() );
850 : OSL_ENSURE( pBox, "Box steht nicht in dieser Tabelle" );
851 0 : aBoxes.insert( pBox );
852 : }
853 :
854 0 : SwNodeIndex aNdIdx( *pDestNd->EndOfSectionNode());
855 0 : if( !bParkTblCrsr )
856 : {
857 : // exit first the complete table
858 : // ???? what about only table in a frame ?????
859 0 : SwCntntNode* pCNd = GetDoc()->GetNodes().GoNext( &aNdIdx );
860 0 : SwPosition aPos( aNdIdx, SwIndex( pCNd, 0 ));
861 : // #i59539: Don't remove all redline
862 0 : SwPaM const tmpPaM(*pDestNd, *pDestNd->EndOfSectionNode());
863 0 : ::PaMCorrAbs(tmpPaM, aPos);
864 : }
865 :
866 0 : bRet = GetDoc()->InsCopyOfTbl( aDestPos, aBoxes, &pSrcNd->GetTable(),
867 0 : sal_False, sal_False );
868 :
869 0 : if( bParkTblCrsr )
870 0 : GetCrsr();
871 : else
872 : {
873 : // return to the box
874 0 : aNdIdx = *pSttNd;
875 0 : SwCntntNode* pCNd = GetDoc()->GetNodes().GoNext( &aNdIdx );
876 0 : SwPosition aPos( aNdIdx, SwIndex( pCNd, 0 ));
877 : // #i59539: Don't remove all redline
878 0 : SwNode & rNode(PCURCRSR->GetPoint()->nNode.GetNode());
879 0 : SwCntntNode *const pCntntNode( rNode.GetCntntNode() );
880 : SwPaM const tmpPam(rNode, 0,
881 0 : rNode, (pCntntNode) ? pCntntNode->Len() : 0);
882 0 : ::PaMCorrAbs(tmpPam, aPos);
883 : }
884 :
885 0 : break; // exit the "while-loop"
886 : }
887 0 : else if( *aCpyPam.GetPoint() == *aCpyPam.GetMark() &&
888 0 : pClpDoc->GetSpzFrmFmts()->size() )
889 : {
890 : // we need a DrawView
891 0 : if( !Imp()->GetDrawView() )
892 0 : MakeDrawView();
893 :
894 0 : for ( sal_uInt16 i = 0; i < pClpDoc->GetSpzFrmFmts()->size(); ++i )
895 : {
896 0 : bool bInsWithFmt = true;
897 0 : const SwFrmFmt& rCpyFmt = *(*pClpDoc->GetSpzFrmFmts())[i];
898 :
899 0 : if( Imp()->GetDrawView()->IsGroupEntered() &&
900 0 : RES_DRAWFRMFMT == rCpyFmt.Which() &&
901 0 : (FLY_AS_CHAR != rCpyFmt.GetAnchor().GetAnchorId()) )
902 : {
903 0 : const SdrObject* pSdrObj = rCpyFmt.FindSdrObject();
904 0 : if( pSdrObj )
905 : {
906 : SdrObject* pNew = GetDoc()->CloneSdrObj( *pSdrObj,
907 0 : false, false );
908 :
909 : // Insert object sets any anchor position to 0.
910 : // Therefore we calculate the absolute position here
911 : // and after the insert the anchor of the object
912 : // is set to the anchor of the group object.
913 0 : Rectangle aSnapRect = pNew->GetSnapRect();
914 0 : if( pNew->GetAnchorPos().X() || pNew->GetAnchorPos().Y() )
915 : {
916 0 : const Point aPoint( 0, 0 );
917 : // OD 2004-04-05 #i26791# - direct drawing object
918 : // positioning for group members
919 0 : pNew->NbcSetAnchorPos( aPoint );
920 0 : pNew->NbcSetSnapRect( aSnapRect );
921 : }
922 :
923 0 : Imp()->GetDrawView()->InsertObjectAtView( pNew, *Imp()->GetPageView() );
924 :
925 0 : Point aGrpAnchor( 0, 0 );
926 0 : SdrObjList* pList = pNew->GetObjList();
927 0 : if ( pList )
928 : {
929 0 : SdrObject* pOwner = pList->GetOwnerObj();
930 0 : if ( pOwner )
931 : {
932 0 : SdrObjGroup* pThisGroup = PTR_CAST(SdrObjGroup, pOwner);
933 0 : aGrpAnchor = pThisGroup->GetAnchorPos();
934 : }
935 : }
936 :
937 : // OD 2004-04-05 #i26791# - direct drawing object
938 : // positioning for group members
939 0 : pNew->NbcSetAnchorPos( aGrpAnchor );
940 0 : pNew->SetSnapRect( aSnapRect );
941 :
942 0 : bInsWithFmt = false;
943 : }
944 : }
945 :
946 0 : if( bInsWithFmt )
947 : {
948 0 : SwFmtAnchor aAnchor( rCpyFmt.GetAnchor() );
949 0 : if ((FLY_AT_PARA == aAnchor.GetAnchorId()) ||
950 0 : (FLY_AT_CHAR == aAnchor.GetAnchorId()) ||
951 0 : (FLY_AS_CHAR == aAnchor.GetAnchorId()))
952 : {
953 0 : SwPosition* pPos = PCURCRSR->GetPoint();
954 : // allow shapes (no controls) in header/footer
955 0 : if( RES_DRAWFRMFMT == rCpyFmt.Which() &&
956 0 : GetDoc()->IsInHeaderFooter( pPos->nNode ) &&
957 0 : CheckControlLayer( rCpyFmt.FindSdrObject() ) )
958 0 : continue;
959 :
960 0 : aAnchor.SetAnchor( pPos );
961 : }
962 0 : else if ( FLY_AT_PAGE == aAnchor.GetAnchorId() )
963 : {
964 0 : aAnchor.SetPageNum( GetPhyPageNum() );
965 : }
966 0 : else if( FLY_AT_FLY == aAnchor.GetAnchorId() )
967 : {
968 0 : Point aPt;
969 0 : lcl_SetAnchor( *PCURCRSR->GetPoint(), *PCURCRSR->GetNode(),
970 0 : 0, aPt, *this, aAnchor, aPt, false );
971 : }
972 :
973 0 : SwFrmFmt * pNew = GetDoc()->CopyLayoutFmt( rCpyFmt, aAnchor, true, true );
974 :
975 0 : if( pNew )
976 : {
977 0 : if( RES_FLYFRMFMT == pNew->Which() )
978 : {
979 0 : const Point aPt( GetCrsrDocPos() );
980 : SwFlyFrm* pFlyFrm = ((SwFlyFrmFmt*)pNew)->
981 0 : GetFrm( &aPt, sal_False );
982 0 : if( pFlyFrm )
983 0 : SelectFlyFrm( *pFlyFrm, sal_True );
984 : // always pick the first FlyFrame only; the others
985 : // were copied to the clipboard via Fly in Fly
986 : break;
987 : }
988 : else
989 : {
990 : OSL_ENSURE( RES_DRAWFRMFMT == pNew->Which(), "Neues Format.");
991 : // #i52780# - drawing object has
992 : // to be made visible on paste.
993 : {
994 : SwDrawContact* pContact =
995 0 : static_cast<SwDrawContact*>(pNew->FindContactObj());
996 0 : pContact->MoveObjToVisibleLayer( pContact->GetMaster() );
997 : }
998 0 : SdrObject *pObj = pNew->FindSdrObject();
999 0 : SwDrawView *pDV = Imp()->GetDrawView();
1000 0 : pDV->MarkObj( pObj, pDV->GetSdrPageView() );
1001 : // #i47455# - notify draw frame format
1002 : // that position attributes are already set.
1003 0 : if ( pNew->ISA(SwDrawFrmFmt) )
1004 : {
1005 0 : static_cast<SwDrawFrmFmt*>(pNew)->PosAttrSet();
1006 : }
1007 : }
1008 0 : }
1009 : }
1010 : }
1011 : }
1012 : else
1013 : {
1014 0 : if( bDelTbl && IsTableMode() )
1015 : {
1016 0 : SwEditShell::Delete();
1017 0 : bDelTbl = sal_False;
1018 : }
1019 :
1020 0 : SwPosition& rInsPos = *PCURCRSR->GetPoint();
1021 0 : const SwStartNode* pBoxNd = rInsPos.nNode.GetNode().
1022 0 : FindTableBoxStartNode();
1023 0 : if( pBoxNd && 2 == pBoxNd->EndOfSectionIndex() -
1024 0 : pBoxNd->GetIndex() &&
1025 0 : aCpyPam.GetPoint()->nNode != aCpyPam.GetMark()->nNode )
1026 : {
1027 : // Copy more than 1 node in the current box. But
1028 : // then the BoxAttribute should be removed
1029 0 : GetDoc()->ClearBoxNumAttrs( rInsPos.nNode );
1030 : }
1031 :
1032 : // find out if the clipboard document starts with a table
1033 0 : bool bStartWithTable = 0 != aCpyPam.Start()->nNode.GetNode().FindTableNode();
1034 0 : SwPosition aInsertPosition( rInsPos );
1035 :
1036 : {
1037 0 : SwNodeIndex aIndexBefore(rInsPos.nNode);
1038 :
1039 0 : aIndexBefore--;
1040 :
1041 0 : pClpDoc->CopyRange( aCpyPam, rInsPos, false );
1042 :
1043 : {
1044 0 : ++aIndexBefore;
1045 : SwPaM aPaM(SwPosition(aIndexBefore),
1046 0 : SwPosition(rInsPos.nNode));
1047 :
1048 0 : aPaM.GetDoc()->MakeUniqueNumRules(aPaM);
1049 0 : }
1050 : }
1051 :
1052 : // Update the rsid of each pasted text node.
1053 : {
1054 0 : xub_StrLen nNodesCnt = aCpyPam.End()->nNode.GetIndex() - aCpyPam.Start()->nNode.GetIndex();
1055 0 : SwNodes &rDestNodes = GetDoc()->GetNodes();
1056 0 : xub_StrLen nDestStart = PCURCRSR->GetPoint()->nNode.GetIndex() - nNodesCnt;
1057 :
1058 0 : for ( sal_uInt64 nIdx = 0; nIdx <= nNodesCnt; nIdx++ )
1059 : {
1060 0 : SwTxtNode *pTxtNode = rDestNodes[ nDestStart + nIdx ]->GetTxtNode();
1061 0 : if ( pTxtNode )
1062 : {
1063 0 : GetDoc()->UpdateParRsid( pTxtNode );
1064 : }
1065 : }
1066 : }
1067 :
1068 0 : SaveTblBoxCntnt( &rInsPos );
1069 0 : if(bIncludingPageFrames && bStartWithTable)
1070 : {
1071 : //remove the paragraph in front of the table
1072 0 : SwPaM aPara(aInsertPosition);
1073 0 : GetDoc()->DelFullPara(aPara);
1074 : }
1075 : //additionally copy page bound frames
1076 0 : if( bIncludingPageFrames && pClpDoc->GetSpzFrmFmts()->size() )
1077 : {
1078 : // create a draw view if necessary
1079 0 : if( !Imp()->GetDrawView() )
1080 0 : MakeDrawView();
1081 :
1082 0 : for ( sal_uInt16 i = 0; i < pClpDoc->GetSpzFrmFmts()->size(); ++i )
1083 : {
1084 0 : bool bInsWithFmt = true;
1085 0 : const SwFrmFmt& rCpyFmt = *(*pClpDoc->GetSpzFrmFmts())[i];
1086 0 : if( bInsWithFmt )
1087 : {
1088 0 : SwFmtAnchor aAnchor( rCpyFmt.GetAnchor() );
1089 0 : if ( FLY_AT_PAGE == aAnchor.GetAnchorId() )
1090 : {
1091 0 : aAnchor.SetPageNum( aAnchor.GetPageNum() + nStartPageNumber - 1 );
1092 : }
1093 : else
1094 0 : continue;
1095 0 : GetDoc()->CopyLayoutFmt( rCpyFmt, aAnchor, true, true );
1096 : }
1097 : }
1098 0 : }
1099 : }
1100 :
1101 0 : FOREACHPAM_END()
1102 : }
1103 :
1104 0 : GetDoc()->GetIDocumentUndoRedo().EndUndo( UNDO_INSGLOSSARY, NULL );
1105 :
1106 : // have new table formulas been inserted?
1107 0 : if( pTblFldTyp->GetDepends() )
1108 : {
1109 : // finish old action: table-frames have been created
1110 : // a selection can be made now
1111 : sal_uInt16 nActCnt;
1112 0 : for( nActCnt = 0; ActionPend(); ++nActCnt )
1113 0 : EndAllAction();
1114 :
1115 0 : for( ; nActCnt; --nActCnt )
1116 0 : StartAllAction();
1117 : }
1118 0 : GetDoc()->UnlockExpFlds();
1119 0 : GetDoc()->UpdateFlds(NULL, false);
1120 0 : EndAllAction();
1121 :
1122 0 : return bRet;
1123 : }
1124 :
1125 0 : sal_Bool SwFEShell::PastePages( SwFEShell& rToFill, sal_uInt16 nStartPage, sal_uInt16 nEndPage)
1126 : {
1127 0 : Push();
1128 0 : if(!GotoPage(nStartPage))
1129 : {
1130 0 : Pop(sal_False);
1131 0 : return sal_False;
1132 : }
1133 0 : MovePage( fnPageCurr, fnPageStart );
1134 0 : SwPaM aCpyPam( *GetCrsr()->GetPoint() );
1135 0 : String sStartingPageDesc = GetPageDesc( GetCurPageDesc()).GetName();
1136 0 : SwPageDesc* pDesc = rToFill.FindPageDescByName( sStartingPageDesc, sal_True );
1137 0 : if( pDesc )
1138 0 : rToFill.ChgCurPageDesc( *pDesc );
1139 :
1140 0 : if(!GotoPage(nEndPage))
1141 : {
1142 0 : Pop(sal_False);
1143 0 : return sal_False;
1144 : }
1145 : //if the page starts with a table a paragraph has to be inserted before
1146 0 : SwNode* pTableNode = aCpyPam.GetNode()->FindTableNode();
1147 0 : if(pTableNode)
1148 : {
1149 : //insert a paragraph
1150 0 : StartUndo(UNDO_INSERT);
1151 0 : SwNodeIndex aTblIdx( *pTableNode, -1 );
1152 0 : SwPosition aBefore(aTblIdx);
1153 0 : if(GetDoc()->AppendTxtNode( aBefore ))
1154 : {
1155 0 : SwPaM aTmp(aBefore);
1156 0 : aCpyPam = aTmp;
1157 : }
1158 0 : EndUndo(UNDO_INSERT);
1159 : }
1160 :
1161 0 : MovePage( fnPageCurr, fnPageEnd );
1162 0 : aCpyPam.SetMark();
1163 0 : *aCpyPam.GetMark() = *GetCrsr()->GetPoint();
1164 :
1165 0 : SET_CURR_SHELL( this );
1166 :
1167 0 : StartAllAction();
1168 0 : GetDoc()->LockExpFlds();
1169 0 : SetSelection(aCpyPam);
1170 : // copy the text of the selection
1171 0 : SwEditShell::Copy(&rToFill);
1172 :
1173 0 : if(pTableNode)
1174 : {
1175 : //remove the inserted paragraph
1176 0 : Undo();
1177 : //remove the paragraph in the second doc, too
1178 0 : SwNodeIndex aIdx( rToFill.GetDoc()->GetNodes().GetEndOfExtras(), 2 );
1179 0 : SwPaM aPara( aIdx ); //DocStart
1180 0 : rToFill.GetDoc()->DelFullPara(aPara);
1181 : }
1182 : // now the page bound objects
1183 : // additionally copy page bound frames
1184 0 : if( GetDoc()->GetSpzFrmFmts()->size() )
1185 : {
1186 : // create a draw view if necessary
1187 0 : if( !rToFill.Imp()->GetDrawView() )
1188 0 : rToFill.MakeDrawView();
1189 :
1190 0 : for ( sal_uInt16 i = 0; i < GetDoc()->GetSpzFrmFmts()->size(); ++i )
1191 : {
1192 0 : const SwFrmFmt& rCpyFmt = *(*GetDoc()->GetSpzFrmFmts())[i];
1193 0 : SwFmtAnchor aAnchor( rCpyFmt.GetAnchor() );
1194 0 : if ((FLY_AT_PAGE == aAnchor.GetAnchorId()) &&
1195 0 : aAnchor.GetPageNum() >= nStartPage && aAnchor.GetPageNum() <= nEndPage)
1196 : {
1197 0 : aAnchor.SetPageNum( aAnchor.GetPageNum() - nStartPage + 1);
1198 : }
1199 : else
1200 0 : continue;
1201 0 : rToFill.GetDoc()->CopyLayoutFmt( rCpyFmt, aAnchor, true, true );
1202 0 : }
1203 : }
1204 0 : GetDoc()->UnlockExpFlds();
1205 0 : GetDoc()->UpdateFlds(NULL, false);
1206 0 : Pop(sal_False);
1207 0 : EndAllAction();
1208 :
1209 0 : return sal_True;
1210 : }
1211 :
1212 0 : sal_Bool SwFEShell::GetDrawObjGraphic( sal_uLong nFmt, Graphic& rGrf ) const
1213 : {
1214 : OSL_ENSURE( Imp()->HasDrawView(), "GetDrawObjGraphic without DrawView?" );
1215 0 : const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList();
1216 0 : sal_Bool bConvert = sal_True;
1217 0 : if( rMrkList.GetMarkCount() )
1218 : {
1219 0 : if( rMrkList.GetMarkCount() == 1 &&
1220 0 : rMrkList.GetMark( 0 )->GetMarkedSdrObj()->ISA(SwVirtFlyDrawObj) )
1221 : {
1222 : // select frame
1223 0 : if( CNT_GRF == GetCntType() )
1224 : {
1225 0 : const Graphic* pGrf( GetGraphic() );
1226 0 : if ( pGrf )
1227 : {
1228 0 : Graphic aGrf( *pGrf );
1229 0 : if( SOT_FORMAT_GDIMETAFILE == nFmt )
1230 : {
1231 0 : if( GRAPHIC_BITMAP != aGrf.GetType() )
1232 : {
1233 0 : rGrf = aGrf;
1234 0 : bConvert = sal_False;
1235 : }
1236 0 : else if( GetWin() )
1237 : {
1238 0 : Size aSz;
1239 0 : Point aPt;
1240 0 : GetGrfSize( aSz );
1241 :
1242 0 : VirtualDevice aVirtDev;
1243 0 : aVirtDev.EnableOutput( sal_False );
1244 :
1245 0 : MapMode aTmp( GetWin()->GetMapMode() );
1246 0 : aTmp.SetOrigin( aPt );
1247 0 : aVirtDev.SetMapMode( aTmp );
1248 :
1249 0 : GDIMetaFile aMtf;
1250 0 : aMtf.Record( &aVirtDev );
1251 0 : aGrf.Draw( &aVirtDev, aPt, aSz );
1252 0 : aMtf.Stop();
1253 0 : aMtf.SetPrefMapMode( aTmp );
1254 0 : aMtf.SetPrefSize( aSz );
1255 0 : rGrf = aMtf;
1256 : }
1257 : }
1258 0 : else if( GRAPHIC_BITMAP == aGrf.GetType() )
1259 : {
1260 0 : rGrf = aGrf;
1261 0 : bConvert = sal_False;
1262 : }
1263 : else
1264 : {
1265 : // fix(23806): not the origial size, but the current one.
1266 : // Otherwise it could happen that for vector graphics
1267 : // many MB's of memory are allocated.
1268 0 : const Size aSz( FindFlyFrm()->Prt().SSize() );
1269 0 : VirtualDevice aVirtDev( *GetWin() );
1270 :
1271 0 : MapMode aTmp( MAP_TWIP );
1272 0 : aVirtDev.SetMapMode( aTmp );
1273 0 : if( aVirtDev.SetOutputSize( aSz ) )
1274 : {
1275 0 : aGrf.Draw( &aVirtDev, Point(), aSz );
1276 0 : rGrf = aVirtDev.GetBitmap( Point(), aSz );
1277 : }
1278 : else
1279 : {
1280 0 : rGrf = aGrf;
1281 0 : bConvert = sal_False;
1282 0 : }
1283 0 : }
1284 : }
1285 : }
1286 : }
1287 0 : else if( SOT_FORMAT_GDIMETAFILE == nFmt )
1288 0 : rGrf = Imp()->GetDrawView()->GetMarkedObjMetaFile();
1289 0 : else if( SOT_FORMAT_BITMAP == nFmt )
1290 0 : rGrf = Imp()->GetDrawView()->GetMarkedObjBitmapEx();
1291 : }
1292 0 : return bConvert;
1293 : }
1294 :
1295 : // #i50824#
1296 : // replace method <lcl_RemoveOleObjsFromSdrModel> by <lcl_ConvertSdrOle2ObjsToSdrGrafObjs>
1297 0 : static void lcl_ConvertSdrOle2ObjsToSdrGrafObjs( SdrModel* _pModel )
1298 : {
1299 0 : for ( sal_uInt16 nPgNum = 0; nPgNum < _pModel->GetPageCount(); ++nPgNum )
1300 : {
1301 : // setup object iterator in order to iterate through all objects
1302 : // including objects in group objects, but exclusive group objects.
1303 0 : SdrObjListIter aIter(*(_pModel->GetPage( nPgNum )));
1304 0 : while( aIter.IsMore() )
1305 : {
1306 0 : SdrOle2Obj* pOle2Obj = dynamic_cast< SdrOle2Obj* >( aIter.Next() );
1307 0 : if( pOle2Obj )
1308 : {
1309 : // found an ole2 shape
1310 0 : SdrObjList* pObjList = pOle2Obj->GetObjList();
1311 :
1312 : // get its graphic
1313 0 : Graphic aGraphic;
1314 0 : pOle2Obj->Connect();
1315 0 : Graphic* pGraphic = pOle2Obj->GetGraphic();
1316 0 : if( pGraphic )
1317 0 : aGraphic = *pGraphic;
1318 0 : pOle2Obj->Disconnect();
1319 :
1320 : // create new graphic shape with the ole graphic and shape size
1321 0 : SdrGrafObj* pGraphicObj = new SdrGrafObj( aGraphic, pOle2Obj->GetCurrentBoundRect() );
1322 : // apply layer of ole2 shape at graphic shape
1323 0 : pGraphicObj->SetLayer( pOle2Obj->GetLayer() );
1324 :
1325 : // replace ole2 shape with the new graphic object and delete the ol2 shape
1326 0 : SdrObject* pRemovedObject = pObjList->ReplaceObject( pGraphicObj, pOle2Obj->GetOrdNum() );
1327 0 : SdrObject::Free( pRemovedObject );
1328 : }
1329 : }
1330 0 : }
1331 0 : }
1332 :
1333 0 : void SwFEShell::Paste( SvStream& rStrm, sal_uInt16 nAction, const Point* pPt )
1334 : {
1335 0 : SET_CURR_SHELL( this );
1336 0 : StartAllAction();
1337 0 : StartUndo();
1338 :
1339 0 : SvtPathOptions aPathOpt;
1340 : FmFormModel* pModel = new FmFormModel( aPathOpt.GetPalettePath(),
1341 0 : 0, GetDoc()->GetDocShell() );
1342 0 : pModel->GetItemPool().FreezeIdRanges();
1343 :
1344 0 : rStrm.Seek(0);
1345 :
1346 0 : uno::Reference< io::XInputStream > xInputStream( new utl::OInputStreamWrapper( rStrm ) );
1347 0 : SvxDrawingLayerImport( pModel, xInputStream );
1348 :
1349 0 : if ( !Imp()->HasDrawView() )
1350 0 : Imp()->MakeDrawView();
1351 :
1352 0 : Point aPos( pPt ? *pPt : GetCharRect().Pos() );
1353 0 : SdrView *pView = Imp()->GetDrawView();
1354 :
1355 : // drop on the existing object: replace object or apply new attributes
1356 0 : if( pModel->GetPageCount() > 0 &&
1357 0 : 1 == pModel->GetPage(0)->GetObjCount() &&
1358 0 : 1 == pView->GetMarkedObjectList().GetMarkCount() )
1359 : {
1360 : // replace a marked 'virtual' drawing object
1361 : // by its corresponding 'master' drawing object in the mark list.
1362 0 : SwDrawView::ReplaceMarkedDrawVirtObjs( *pView );
1363 :
1364 0 : SdrObject* pClpObj = pModel->GetPage(0)->GetObj(0);
1365 0 : SdrObject* pOldObj = pView->GetMarkedObjectList().GetMark( 0 )->GetMarkedSdrObj();
1366 :
1367 0 : if( SW_PASTESDR_SETATTR == nAction && pOldObj->ISA(SwVirtFlyDrawObj) )
1368 0 : nAction = SW_PASTESDR_REPLACE;
1369 :
1370 0 : switch( nAction )
1371 : {
1372 : case SW_PASTESDR_REPLACE:
1373 : {
1374 0 : const SwFrmFmt* pFmt(0);
1375 0 : const SwFrm* pAnchor(0);
1376 0 : if( pOldObj->ISA(SwVirtFlyDrawObj) )
1377 : {
1378 0 : pFmt = FindFrmFmt( pOldObj );
1379 :
1380 0 : Point aNullPt;
1381 0 : SwFlyFrm* pFlyFrm = ((SwFlyFrmFmt*)pFmt)->GetFrm( &aNullPt );
1382 0 : pAnchor = pFlyFrm->GetAnchorFrm();
1383 :
1384 0 : if( pAnchor->FindFooterOrHeader() )
1385 : {
1386 : // if there is a textframe in the header/footer:
1387 : // do not replace but insert
1388 0 : nAction = SW_PASTESDR_INSERT;
1389 : break;
1390 : }
1391 : }
1392 :
1393 0 : SdrObject* pNewObj = pClpObj->Clone();
1394 0 : Rectangle aOldObjRect( pOldObj->GetCurrentBoundRect() );
1395 0 : Size aOldObjSize( aOldObjRect.GetSize() );
1396 0 : Rectangle aNewRect( pNewObj->GetCurrentBoundRect() );
1397 0 : Size aNewSize( aNewRect.GetSize() );
1398 :
1399 0 : Fraction aScaleWidth( aOldObjSize.Width(), aNewSize.Width() );
1400 0 : Fraction aScaleHeight( aOldObjSize.Height(), aNewSize.Height());
1401 0 : pNewObj->NbcResize( aNewRect.TopLeft(), aScaleWidth, aScaleHeight);
1402 :
1403 0 : Point aVec = aOldObjRect.TopLeft() - aNewRect.TopLeft();
1404 0 : pNewObj->NbcMove(Size(aVec.X(), aVec.Y()));
1405 :
1406 0 : if( pNewObj->ISA( SdrUnoObj ) )
1407 0 : pNewObj->SetLayer( GetDoc()->GetControlsId() );
1408 0 : else if( pOldObj->ISA( SdrUnoObj ) )
1409 0 : pNewObj->SetLayer( GetDoc()->GetHeavenId() );
1410 : else
1411 0 : pNewObj->SetLayer( pOldObj->GetLayer() );
1412 :
1413 0 : if( pOldObj->ISA(SwVirtFlyDrawObj) )
1414 : {
1415 : // store attributes, then set SdrObject
1416 0 : SfxItemSet aFrmSet( pDoc->GetAttrPool(),
1417 0 : RES_SURROUND, RES_ANCHOR );
1418 0 : aFrmSet.Set( pFmt->GetAttrSet() );
1419 :
1420 0 : Point aNullPt;
1421 0 : if( pAnchor->IsTxtFrm() && ((SwTxtFrm*)pAnchor)->IsFollow() )
1422 : {
1423 0 : const SwTxtFrm* pTmp = (SwTxtFrm*)pAnchor;
1424 0 : do {
1425 0 : pTmp = pTmp->FindMaster();
1426 : OSL_ENSURE( pTmp, "Where's my Master?" );
1427 0 : } while( pTmp->IsFollow() );
1428 0 : pAnchor = pTmp;
1429 : }
1430 0 : if( pOldObj->ISA( SdrCaptionObj ))
1431 0 : aNullPt = ((SdrCaptionObj*)pOldObj)->GetTailPos();
1432 : else
1433 0 : aNullPt = aOldObjRect.TopLeft();
1434 :
1435 0 : Point aNewAnchor = pAnchor->GetFrmAnchorPos( ::HasWrap( pOldObj ) );
1436 : // OD 2004-04-05 #i26791# - direct positioning of Writer
1437 : // fly frame object for <SwDoc::Insert(..)>
1438 0 : pNewObj->NbcSetRelativePos( aNullPt - aNewAnchor );
1439 0 : pNewObj->NbcSetAnchorPos( aNewAnchor );
1440 :
1441 0 : pOldObj->GetOrdNum();
1442 :
1443 0 : DelSelectedObj();
1444 :
1445 0 : pFmt = GetDoc()->Insert( *GetCrsr(), *pNewObj, &aFrmSet, NULL );
1446 : }
1447 : else
1448 0 : pView->ReplaceObjectAtView( pOldObj, *Imp()->GetPageView(), pNewObj, sal_True );
1449 : }
1450 0 : break;
1451 :
1452 : case SW_PASTESDR_SETATTR:
1453 : {
1454 0 : SfxItemSet aSet( GetAttrPool() );
1455 0 : aSet.Put(pClpObj->GetMergedItemSet());
1456 0 : pView->SetAttributes( aSet, sal_False );
1457 : }
1458 0 : break;
1459 :
1460 : default:
1461 0 : nAction = SW_PASTESDR_INSERT;
1462 0 : break;
1463 : }
1464 : }
1465 : else
1466 0 : nAction = SW_PASTESDR_INSERT;
1467 :
1468 0 : if( SW_PASTESDR_INSERT == nAction )
1469 : {
1470 0 : ::sw::DrawUndoGuard drawUndoGuard(GetDoc()->GetIDocumentUndoRedo());
1471 :
1472 0 : sal_Bool bDesignMode = pView->IsDesignMode();
1473 0 : if( !bDesignMode )
1474 0 : pView->SetDesignMode( sal_True );
1475 :
1476 : // #i50824#
1477 : // method <lcl_RemoveOleObjsFromSdrModel> replaced by <lcl_ConvertSdrOle2ObjsToSdrGrafObjs>
1478 0 : lcl_ConvertSdrOle2ObjsToSdrGrafObjs( pModel );
1479 0 : pView->Paste( *pModel, aPos );
1480 :
1481 0 : sal_uLong nCnt = pView->GetMarkedObjectList().GetMarkCount();
1482 0 : if( nCnt )
1483 : {
1484 0 : const Point aNull( 0, 0 );
1485 0 : for( sal_uLong i=0; i < nCnt; ++i )
1486 : {
1487 0 : SdrObject *pObj = pView->GetMarkedObjectList().GetMark(i)->GetMarkedSdrObj();
1488 0 : pObj->ImpSetAnchorPos( aNull );
1489 : }
1490 :
1491 0 : pView->SetCurrentObj( OBJ_GRUP, SdrInventor );
1492 0 : if ( nCnt > 1 )
1493 0 : pView->GroupMarked();
1494 0 : SdrObject *pObj = pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj();
1495 0 : if( pObj->ISA( SdrUnoObj ) )
1496 : {
1497 0 : pObj->SetLayer( GetDoc()->GetControlsId() );
1498 0 : bDesignMode = sal_True;
1499 : }
1500 : else
1501 0 : pObj->SetLayer( GetDoc()->GetHeavenId() );
1502 0 : const Rectangle &rSnap = pObj->GetSnapRect();
1503 0 : const Size aDiff( rSnap.GetWidth()/2, rSnap.GetHeight()/2 );
1504 0 : pView->MoveMarkedObj( aDiff );
1505 0 : ImpEndCreate();
1506 0 : if( !bDesignMode )
1507 0 : pView->SetDesignMode( sal_False );
1508 0 : }
1509 : }
1510 0 : EndUndo();
1511 0 : EndAllAction();
1512 0 : delete pModel;
1513 0 : }
1514 :
1515 0 : sal_Bool SwFEShell::Paste( const Graphic &rGrf )
1516 : {
1517 0 : SET_CURR_SHELL( this );
1518 : SdrObject* pObj;
1519 0 : SdrView *pView = Imp()->GetDrawView();
1520 :
1521 0 : sal_Bool bRet = 1 == pView->GetMarkedObjectList().GetMarkCount() &&
1522 0 : (pObj = pView->GetMarkedObjectList().GetMark( 0 )->GetMarkedSdrObj())->IsClosedObj() &&
1523 0 : !pObj->ISA( SdrOle2Obj );
1524 :
1525 0 : if( bRet )
1526 : {
1527 0 : XOBitmap aXOBitmap( rGrf.GetBitmap() );
1528 0 : SfxItemSet aSet( GetAttrPool(), XATTR_FILLSTYLE, XATTR_FILLBITMAP );
1529 0 : aSet.Put( XFillStyleItem( XFILL_BITMAP ));
1530 0 : aSet.Put( XFillBitmapItem( aEmptyStr, aXOBitmap ));
1531 0 : pView->SetAttributes( aSet, sal_False );
1532 : }
1533 0 : return bRet;
1534 : }
1535 :
1536 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|