Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 :
21 : #include <tools/bigint.hxx>
22 : #include "pagefrm.hxx"
23 : #include "cntfrm.hxx"
24 : #include "flyfrm.hxx"
25 : #include "txtfrm.hxx"
26 : #include <doc.hxx>
27 : #include <IDocumentUndoRedo.hxx>
28 : #include "viewsh.hxx"
29 : #include "viewimp.hxx"
30 : #include "pam.hxx"
31 : #include "frmfmt.hxx"
32 : #include "frmtool.hxx"
33 : #include "dflyobj.hxx"
34 : #include "hints.hxx"
35 : #include "ndtxt.hxx"
36 : #include "swundo.hxx"
37 : #include <editeng/ulspitem.hxx>
38 : #include <editeng/lrspitem.hxx>
39 : #include <fmtanchr.hxx>
40 : #include <fmtornt.hxx>
41 : #include <fmtfsize.hxx>
42 : #include <fmtsrnd.hxx>
43 :
44 : #include "tabfrm.hxx"
45 : #include "flyfrms.hxx"
46 : #include "crstate.hxx"
47 : #include "sectfrm.hxx"
48 :
49 : #include <tocntntanchoredobjectposition.hxx>
50 : #include <dcontact.hxx>
51 : #include <sortedobjs.hxx>
52 : #include <layouter.hxx>
53 : #include <objectformattertxtfrm.hxx>
54 : #include <HandleAnchorNodeChg.hxx>
55 :
56 : using namespace ::com::sun::star;
57 :
58 :
59 : /*************************************************************************
60 : |*
61 : |* SwFlyAtCntFrm::SwFlyAtCntFrm()
62 : |*
63 : |*************************************************************************/
64 :
65 74 : SwFlyAtCntFrm::SwFlyAtCntFrm( SwFlyFrmFmt *pFmt, SwFrm* pSib, SwFrm *pAnch ) :
66 74 : SwFlyFreeFrm( pFmt, pSib, pAnch )
67 : {
68 74 : bAtCnt = sal_True;
69 74 : bAutoPosition = (FLY_AT_CHAR == pFmt->GetAnchor().GetAnchorId());
70 74 : }
71 :
72 : // #i28701#
73 9762 : TYPEINIT1(SwFlyAtCntFrm,SwFlyFreeFrm);
74 : /*************************************************************************
75 : |*
76 : |* SwFlyAtCntFrm::Modify()
77 : |*
78 : |*************************************************************************/
79 :
80 0 : void SwFlyAtCntFrm::Modify( const SfxPoolItem* pOld, const SfxPoolItem *pNew )
81 : {
82 0 : sal_uInt16 nWhich = pNew ? pNew->Which() : 0;
83 0 : const SwFmtAnchor *pAnch = 0;
84 :
85 0 : if( RES_ATTRSET_CHG == nWhich && SFX_ITEM_SET ==
86 0 : ((SwAttrSetChg*)pNew)->GetChgSet()->GetItemState( RES_ANCHOR, sal_False,
87 0 : (const SfxPoolItem**)&pAnch ))
88 : ; // The anchor pointer is set at GetItemState!
89 :
90 0 : else if( RES_ANCHOR == nWhich )
91 : {
92 : //Change anchor, I move myself to a new place.
93 : //The anchor type must not change, this is only possible using
94 : //SwFEShell.
95 0 : pAnch = (const SwFmtAnchor*)pNew;
96 : }
97 :
98 0 : if( pAnch )
99 : {
100 : OSL_ENSURE( pAnch->GetAnchorId() == GetFmt()->GetAnchor().GetAnchorId(),
101 : "Illegal change of anchor type. " );
102 :
103 : //Unregister, get hold of a new anchor and attach it
104 0 : SwRect aOld( GetObjRectWithSpaces() );
105 0 : SwPageFrm *pOldPage = FindPageFrm();
106 0 : const SwFrm *pOldAnchor = GetAnchorFrm();
107 0 : SwCntntFrm *pCntnt = (SwCntntFrm*)GetAnchorFrm();
108 0 : AnchorFrm()->RemoveFly( this );
109 :
110 0 : const bool bBodyFtn = (pCntnt->IsInDocBody() || pCntnt->IsInFtn());
111 :
112 : // Search the new anchor using the NodeIdx; the relation between old
113 : // and new NodeIdx determines the search direction
114 0 : const SwNodeIndex aNewIdx( pAnch->GetCntntAnchor()->nNode );
115 0 : SwNodeIndex aOldIdx( *pCntnt->GetNode() );
116 :
117 : //fix: depending on which index was smaller, searching in the do-while
118 : //loop previously was done forward or backwards respectively. This however
119 : //could lead to an infinite loop. To at least avoid the loop, searching
120 : //is now done in only one direction. Getting hold of a frame from the node
121 : //is still possible if the new anchor could not be found. Chances are
122 : //good that this will be the correct one.
123 0 : const bool bNext = aOldIdx < aNewIdx;
124 : // consider the case that at found anchor frame candidate already a
125 : // fly frame of the given fly format is registered.
126 : // consider, that <pCntnt> is the already
127 : // the new anchor frame.
128 0 : bool bFound( aOldIdx == aNewIdx );
129 0 : while ( pCntnt && !bFound )
130 : {
131 0 : do
132 : {
133 0 : if ( bNext )
134 0 : pCntnt = pCntnt->GetNextCntntFrm();
135 : else
136 0 : pCntnt = pCntnt->GetPrevCntntFrm();
137 : } while ( pCntnt &&
138 0 : !( bBodyFtn == ( pCntnt->IsInDocBody() ||
139 0 : pCntnt->IsInFtn() ) ) );
140 0 : if ( pCntnt )
141 0 : aOldIdx = *pCntnt->GetNode();
142 :
143 : // check, if at found anchor frame candidate already a fly frame
144 : // of the given fly frame format is registered.
145 0 : bFound = aOldIdx == aNewIdx;
146 0 : if ( bFound && pCntnt->GetDrawObjs() )
147 : {
148 0 : SwFrmFmt* pMyFlyFrmFmt( &GetFrmFmt() );
149 0 : SwSortedObjs &rObjs = *pCntnt->GetDrawObjs();
150 0 : for( sal_uInt16 i = 0; i < rObjs.Count(); ++i)
151 : {
152 0 : SwFlyFrm* pFlyFrm = dynamic_cast<SwFlyFrm*>(rObjs[i]);
153 0 : if ( pFlyFrm &&
154 0 : &(pFlyFrm->GetFrmFmt()) == pMyFlyFrmFmt )
155 : {
156 0 : bFound = false;
157 0 : break;
158 : }
159 : }
160 : }
161 : }
162 0 : if ( !pCntnt )
163 : {
164 0 : SwCntntNode *pNode = aNewIdx.GetNode().GetCntntNode();
165 0 : pCntnt = pNode->getLayoutFrm( getRootFrm(), &pOldAnchor->Frm().Pos(), 0, sal_False );
166 : OSL_ENSURE( pCntnt, "Neuen Anker nicht gefunden" );
167 : }
168 : //Flys are never attached to a follow, but always on the master which
169 : //we are going to search now.
170 0 : SwCntntFrm* pFlow = pCntnt;
171 0 : while ( pFlow->IsFollow() )
172 0 : pFlow = pFlow->FindMaster();
173 0 : pCntnt = pFlow;
174 :
175 : //and *puff* it's attached...
176 0 : pCntnt->AppendFly( this );
177 0 : if ( pOldPage && pOldPage != FindPageFrm() )
178 0 : NotifyBackground( pOldPage, aOld, PREP_FLY_LEAVE );
179 :
180 : //Fix(3495)
181 0 : _InvalidatePos();
182 0 : InvalidatePage();
183 0 : SetNotifyBack();
184 : // #i28701# - reset member <maLastCharRect> and
185 : // <mnLastTopOfLine> for to-character anchored objects.
186 0 : ClearCharRectAndTopOfLine();
187 : }
188 : else
189 0 : SwFlyFrm::Modify( pOld, pNew );
190 0 : }
191 :
192 : /*************************************************************************
193 : |*
194 : |* SwFlyAtCntFrm::MakeAll()
195 : |*
196 : |* Description With a paragraph-anchored fly it's absolutely possible that
197 : |* the anchor reacts to changes of the fly. To this reaction the fly must
198 : |* certaily react too. Sadly this can lead to oscillations; for example the
199 : |* fly wants to go down therefore the content can go up - this leads to a
200 : |* smaller TxtFrm thus the fly needs to go up again whereby the text will
201 : |* get pushed down...
202 : |* To avoid such oscillations, a small position stack is built. If the fly
203 : |* reaches a position which it already had once, the action is stopped.
204 : |* To not run into problems, the stack is designed to hold five positions.
205 : |* If the stack flows over, the action is stopped too.
206 : |* Cancellation leads to the situation that the fly has a bad position in
207 : |* the end. In case of cancellation, the frame is set to automatic top
208 : |* alignment to not trigger a 'big oscillation' when calling from outside
209 : |* again.
210 : |*************************************************************************/
211 : //We need some helper classes to monitor the oscillation and a few functions
212 : //to not get lost.
213 :
214 : // #i3317# - re-factoring of the position stack
215 : class SwOszControl
216 : {
217 : static const SwFlyFrm *pStk1;
218 : static const SwFlyFrm *pStk2;
219 : static const SwFlyFrm *pStk3;
220 : static const SwFlyFrm *pStk4;
221 : static const SwFlyFrm *pStk5;
222 :
223 : const SwFlyFrm *pFly;
224 : // #i3317#
225 : sal_uInt8 mnPosStackSize;
226 : std::vector<Point*> maObjPositions;
227 :
228 : public:
229 : SwOszControl( const SwFlyFrm *pFrm );
230 : ~SwOszControl();
231 : bool ChkOsz();
232 : static bool IsInProgress( const SwFlyFrm *pFly );
233 : };
234 : const SwFlyFrm *SwOszControl::pStk1 = 0;
235 : const SwFlyFrm *SwOszControl::pStk2 = 0;
236 : const SwFlyFrm *SwOszControl::pStk3 = 0;
237 : const SwFlyFrm *SwOszControl::pStk4 = 0;
238 : const SwFlyFrm *SwOszControl::pStk5 = 0;
239 :
240 80 : SwOszControl::SwOszControl( const SwFlyFrm *pFrm )
241 : : pFly( pFrm ),
242 : // #i3317#
243 80 : mnPosStackSize( 20 )
244 : {
245 80 : if ( !SwOszControl::pStk1 )
246 80 : SwOszControl::pStk1 = pFly;
247 0 : else if ( !SwOszControl::pStk2 )
248 0 : SwOszControl::pStk2 = pFly;
249 0 : else if ( !SwOszControl::pStk3 )
250 0 : SwOszControl::pStk3 = pFly;
251 0 : else if ( !SwOszControl::pStk4 )
252 0 : SwOszControl::pStk4 = pFly;
253 0 : else if ( !SwOszControl::pStk5 )
254 0 : SwOszControl::pStk5 = pFly;
255 80 : }
256 :
257 160 : SwOszControl::~SwOszControl()
258 : {
259 80 : if ( SwOszControl::pStk1 == pFly )
260 80 : SwOszControl::pStk1 = 0;
261 0 : else if ( SwOszControl::pStk2 == pFly )
262 0 : SwOszControl::pStk2 = 0;
263 0 : else if ( SwOszControl::pStk3 == pFly )
264 0 : SwOszControl::pStk3 = 0;
265 0 : else if ( SwOszControl::pStk4 == pFly )
266 0 : SwOszControl::pStk4 = 0;
267 0 : else if ( SwOszControl::pStk5 == pFly )
268 0 : SwOszControl::pStk5 = 0;
269 : // #i3317#
270 216 : while ( !maObjPositions.empty() )
271 : {
272 56 : Point* pPos = maObjPositions.back();
273 56 : delete pPos;
274 :
275 56 : maObjPositions.pop_back();
276 : }
277 80 : }
278 :
279 306 : bool SwOszControl::IsInProgress( const SwFlyFrm *pFly )
280 : {
281 306 : if ( SwOszControl::pStk1 && !pFly->IsLowerOf( SwOszControl::pStk1 ) )
282 0 : return true;
283 306 : if ( SwOszControl::pStk2 && !pFly->IsLowerOf( SwOszControl::pStk2 ) )
284 0 : return true;
285 306 : if ( SwOszControl::pStk3 && !pFly->IsLowerOf( SwOszControl::pStk3 ) )
286 0 : return true;
287 306 : if ( SwOszControl::pStk4 && !pFly->IsLowerOf( SwOszControl::pStk4 ) )
288 0 : return true;
289 306 : if ( SwOszControl::pStk5 && !pFly->IsLowerOf( SwOszControl::pStk5 ) )
290 0 : return true;
291 306 : return false;
292 : }
293 :
294 56 : bool SwOszControl::ChkOsz()
295 : {
296 56 : bool bOscillationDetected = false;
297 :
298 56 : if ( maObjPositions.size() == mnPosStackSize )
299 : {
300 : // position stack is full -> oscillation
301 0 : bOscillationDetected = true;
302 : }
303 : else
304 : {
305 56 : Point* pNewObjPos = new Point( pFly->GetObjRect().Pos() );
306 168 : for ( std::vector<Point*>::iterator aObjPosIter = maObjPositions.begin();
307 112 : aObjPosIter != maObjPositions.end();
308 : ++aObjPosIter )
309 : {
310 0 : if ( *(pNewObjPos) == *(*aObjPosIter) )
311 : {
312 : // position already occurred -> oscillation
313 0 : bOscillationDetected = true;
314 0 : delete pNewObjPos;
315 0 : break;
316 : }
317 : }
318 56 : if ( !bOscillationDetected )
319 : {
320 56 : maObjPositions.push_back( pNewObjPos );
321 : }
322 : }
323 :
324 56 : return bOscillationDetected;
325 : }
326 :
327 80 : void SwFlyAtCntFrm::MakeAll()
328 : {
329 80 : if ( !GetFmt()->GetDoc()->IsVisibleLayerId( GetVirtDrawObj()->GetLayer() ) )
330 : {
331 80 : return;
332 : }
333 :
334 80 : if ( !SwOszControl::IsInProgress( this ) && !IsLocked() && !IsColLocked() )
335 : {
336 : // #i28701# - use new method <GetPageFrm()>
337 80 : if( !GetPageFrm() && GetAnchorFrm() && GetAnchorFrm()->IsInFly() )
338 : {
339 0 : SwFlyFrm* pFly = AnchorFrm()->FindFlyFrm();
340 0 : SwPageFrm *pTmpPage = pFly ? pFly->FindPageFrm() : NULL;
341 0 : if( pTmpPage )
342 0 : pTmpPage->AppendFlyToPage( this );
343 : }
344 : // #i28701# - use new method <GetPageFrm()>
345 80 : if( GetPageFrm() )
346 : {
347 80 : bSetCompletePaintOnInvalidate = true;
348 : {
349 80 : SwFlyFrmFmt *pFmt = (SwFlyFrmFmt*)GetFmt();
350 80 : const SwFmtFrmSize &rFrmSz = GetFmt()->GetFrmSize();
351 160 : if( rFrmSz.GetHeightPercent() != 0xFF &&
352 80 : rFrmSz.GetHeightPercent() >= 100 )
353 : {
354 0 : pFmt->LockModify();
355 0 : SwFmtSurround aMain( pFmt->GetSurround() );
356 0 : if ( aMain.GetSurround() == SURROUND_NONE )
357 : {
358 0 : aMain.SetSurround( SURROUND_THROUGHT );
359 0 : pFmt->SetFmtAttr( aMain );
360 : }
361 0 : pFmt->UnlockModify();
362 : }
363 : }
364 :
365 80 : SwOszControl aOszCntrl( this );
366 :
367 : // #i43255#
368 : // #i50356# - format the anchor frame, which
369 : // contains the anchor position. E.g., for at-character anchored
370 : // object this can be the follow frame of the anchor frame.
371 : const bool bFormatAnchor =
372 80 : !static_cast<const SwTxtFrm*>( GetAnchorFrmContainingAnchPos() )->IsAnyJoinLocked() &&
373 80 : !ConsiderObjWrapInfluenceOnObjPos() &&
374 160 : !ConsiderObjWrapInfluenceOfOtherObjs();
375 :
376 80 : const SwFrm* pFooter = GetAnchorFrm()->FindFooterOrHeader();
377 80 : if( pFooter && !pFooter->IsFooterFrm() )
378 16 : pFooter = NULL;
379 80 : bool bOsz = false;
380 80 : bool bExtra = Lower() && Lower()->IsColumnFrm();
381 : // #i3317# - boolean, to apply temporarly the
382 : // 'straightforward positioning process' for the frame due to its
383 : // overlapping with a previous column.
384 80 : bool bConsiderWrapInfluenceDueToOverlapPrevCol( false );
385 : // #i35911# - boolean, to apply temporarly the
386 : // 'straightforward positioning process' for the frame due to fact
387 : // that it causes the complete content of its layout environment
388 : // to move forward.
389 : // #i40444# - extend usage of this boolean:
390 : // apply temporarly the 'straightforward positioning process' for
391 : // the frame due to the fact that the frame clears the area for
392 : // the anchor frame, thus it has to move forward.
393 80 : bool bConsiderWrapInfluenceDueToMovedFwdAnchor( false );
394 256 : do {
395 82 : SWRECTFN( this )
396 82 : Point aOldPos( (Frm().*fnRect->fnGetPos)() );
397 82 : SwFlyFreeFrm::MakeAll();
398 : const bool bPosChgDueToOwnFormat =
399 82 : aOldPos != (Frm().*fnRect->fnGetPos)();
400 : // #i3317#
401 160 : if ( !ConsiderObjWrapInfluenceOnObjPos() &&
402 78 : OverlapsPrevColumn() )
403 : {
404 0 : bConsiderWrapInfluenceDueToOverlapPrevCol = true;
405 : }
406 : // #i28701# - no format of anchor frame, if
407 : // wrapping style influence is considered on object positioning
408 82 : if ( bFormatAnchor )
409 : {
410 : SwTxtFrm* pAnchPosAnchorFrm =
411 78 : dynamic_cast<SwTxtFrm*>(GetAnchorFrmContainingAnchPos());
412 : OSL_ENSURE( pAnchPosAnchorFrm,
413 : "<SwFlyAtCntFrm::MakeAll()> - anchor frame of wrong type -> crash" );
414 : // #i58182# - For the usage of new method
415 : // <SwObjectFormatterTxtFrm::CheckMovedFwdCondition(..)>
416 : // to check move forward of anchor frame due to the object
417 : // positioning it's needed to know, if the object is anchored
418 : // at the master frame before the anchor frame is formatted.
419 78 : const bool bAnchoredAtMaster( !pAnchPosAnchorFrm->IsFollow() );
420 :
421 : // #i56300#
422 : // perform complete format of anchor text frame and its
423 : // previous frames, which have become invalid due to the
424 : // fly frame format.
425 78 : SwObjectFormatterTxtFrm::FormatAnchorFrmAndItsPrevs( *pAnchPosAnchorFrm );
426 : // #i35911#
427 : // #i40444#
428 : // #i58182# - usage of new method
429 : // <SwObjectFormatterTxtFrm::CheckMovedFwdCondition(..)>
430 78 : sal_uInt32 nToPageNum( 0L );
431 78 : bool bDummy( false );
432 78 : if ( SwObjectFormatterTxtFrm::CheckMovedFwdCondition(
433 78 : *this, GetPageFrm()->GetPhyPageNum(),
434 156 : bAnchoredAtMaster, nToPageNum, bDummy ) )
435 : {
436 0 : bConsiderWrapInfluenceDueToMovedFwdAnchor = true;
437 : // mark anchor text frame
438 : // directly, that it is moved forward by object positioning.
439 0 : SwTxtFrm* pAnchorTxtFrm( static_cast<SwTxtFrm*>(AnchorFrm()) );
440 0 : bool bInsert( true );
441 0 : sal_uInt32 nAnchorFrmToPageNum( 0L );
442 0 : const SwDoc& rDoc = *(GetFrmFmt().GetDoc());
443 0 : if ( SwLayouter::FrmMovedFwdByObjPos(
444 : rDoc, *pAnchorTxtFrm, nAnchorFrmToPageNum ) )
445 : {
446 0 : if ( nAnchorFrmToPageNum < nToPageNum )
447 0 : SwLayouter::RemoveMovedFwdFrm( rDoc, *pAnchorTxtFrm );
448 : else
449 0 : bInsert = false;
450 : }
451 0 : if ( bInsert )
452 : {
453 : SwLayouter::InsertMovedFwdFrm( rDoc, *pAnchorTxtFrm,
454 0 : nToPageNum );
455 : }
456 : }
457 : }
458 :
459 108 : if ( aOldPos != (Frm().*fnRect->fnGetPos)() ||
460 26 : ( !GetValidPosFlag() &&
461 : ( pFooter || bPosChgDueToOwnFormat ) ) )
462 : {
463 56 : bOsz = aOszCntrl.ChkOsz();
464 :
465 : // special loop prevention for dedicated document:
466 56 : if ( bOsz &&
467 0 : HasFixSize() && IsClipped() &&
468 0 : GetAnchorFrm()->GetUpper()->IsCellFrm() )
469 : {
470 0 : SwFrmFmt* pFmt = GetFmt();
471 0 : const SwFmtFrmSize& rFrmSz = pFmt->GetFrmSize();
472 0 : if ( rFrmSz.GetWidthPercent() &&
473 0 : rFrmSz.GetHeightPercent() == 0xFF )
474 : {
475 0 : SwFmtSurround aSurround( pFmt->GetSurround() );
476 0 : if ( aSurround.GetSurround() == SURROUND_NONE )
477 : {
478 0 : pFmt->LockModify();
479 0 : aSurround.SetSurround( SURROUND_THROUGHT );
480 0 : pFmt->SetFmtAttr( aSurround );
481 0 : pFmt->UnlockModify();
482 0 : bOsz = false;
483 : OSL_FAIL( "<SwFlyAtCntFrm::MakeAll()> - special loop prevention for dedicated document of b6403541 applied" );
484 0 : }
485 : }
486 : }
487 : }
488 :
489 82 : if ( bExtra && Lower() && !Lower()->GetValidPosFlag() )
490 : {
491 : // If a multi column frame leaves invalid columns because of
492 : // a position change, we loop once more and format
493 : // our content using FormatWidthCols again.
494 0 : _InvalidateSize();
495 0 : bExtra = false; // Ensure only one additional loop run
496 : }
497 84 : } while ( !IsValid() && !bOsz &&
498 : // #i3317#
499 2 : !bConsiderWrapInfluenceDueToOverlapPrevCol &&
500 : // #i40444#
501 2 : !bConsiderWrapInfluenceDueToMovedFwdAnchor &&
502 86 : GetFmt()->GetDoc()->IsVisibleLayerId( GetVirtDrawObj()->GetLayer() ) );
503 :
504 : // #i3317# - instead of attribute change apply
505 : // temporarly the 'straightforward positioning process'.
506 : // #i80924#
507 : // handle special case during splitting of table rows
508 80 : if ( bConsiderWrapInfluenceDueToMovedFwdAnchor &&
509 0 : GetAnchorFrm()->IsInTab() &&
510 0 : GetAnchorFrm()->IsInFollowFlowRow() )
511 : {
512 0 : const SwFrm* pCellFrm = GetAnchorFrm();
513 0 : while ( pCellFrm && !pCellFrm->IsCellFrm() )
514 : {
515 0 : pCellFrm = pCellFrm->GetUpper();
516 : }
517 0 : if ( pCellFrm )
518 : {
519 0 : SWRECTFN( pCellFrm )
520 0 : if ( (pCellFrm->Frm().*fnRect->fnGetTop)() == 0 &&
521 0 : (pCellFrm->Frm().*fnRect->fnGetHeight)() == 0 )
522 : {
523 0 : bConsiderWrapInfluenceDueToMovedFwdAnchor = false;
524 : }
525 : }
526 : }
527 80 : if ( bOsz || bConsiderWrapInfluenceDueToOverlapPrevCol ||
528 : // #i40444#
529 : bConsiderWrapInfluenceDueToMovedFwdAnchor )
530 : {
531 0 : SetTmpConsiderWrapInfluence( true );
532 0 : SetRestartLayoutProcess( true );
533 0 : SetTmpConsiderWrapInfluenceOfOtherObjs( true );
534 : }
535 80 : bSetCompletePaintOnInvalidate = false;
536 : }
537 : }
538 : }
539 :
540 : /** method to determine, if a <MakeAll()> on the Writer fly frame is possible
541 :
542 : #i28701#
543 : */
544 226 : bool SwFlyAtCntFrm::IsFormatPossible() const
545 : {
546 226 : return SwFlyFreeFrm::IsFormatPossible() &&
547 226 : !SwOszControl::IsInProgress( this );
548 : }
549 :
550 : /*************************************************************************
551 : |*
552 : |* FindAnchor() und Hilfsfunktionen.
553 : |*
554 : |* Description: Searches an anchor for paragraph bound objects
555 : |* starting from pOldAnch. This is used to show anchors as well as changing
556 : |* anchors when dragging paragraph bound objects.
557 : |*
558 : |*************************************************************************/
559 :
560 : class SwDistance
561 : {
562 : public:
563 : SwTwips nMain, nSub;
564 0 : SwDistance() { nMain = nSub = 0; }
565 0 : SwDistance& operator=( const SwDistance &rTwo )
566 0 : { nMain = rTwo.nMain; nSub = rTwo.nSub; return *this; }
567 0 : bool operator<( const SwDistance& rTwo ) const
568 : { return nMain < rTwo.nMain || ( nMain == rTwo.nMain && nSub &&
569 0 : rTwo.nSub && nSub < rTwo.nSub ); }
570 0 : bool operator<=( const SwDistance& rTwo ) const
571 0 : { return nMain < rTwo.nMain || ( nMain == rTwo.nMain && ( !nSub ||
572 0 : !rTwo.nSub || nSub <= rTwo.nSub ) ); }
573 : };
574 :
575 0 : static const SwFrm * lcl_CalcDownDist( SwDistance &rRet,
576 : const Point &rPt,
577 : const SwCntntFrm *pCnt )
578 : {
579 0 : rRet.nSub = 0;
580 : //If the point stays inside the Cnt everything is clear already; the Cntnt
581 : //automatically has a distance of 0.
582 0 : if ( pCnt->Frm().IsInside( rPt ) )
583 : {
584 0 : rRet.nMain = 0;
585 0 : return pCnt;
586 : }
587 : else
588 : {
589 0 : const SwLayoutFrm *pUp = pCnt->IsInTab() ? pCnt->FindTabFrm()->GetUpper() : pCnt->GetUpper();
590 : // single column sections need to interconnect to their upper
591 0 : while( pUp->IsSctFrm() )
592 0 : pUp = pUp->GetUpper();
593 0 : const bool bVert = pUp->IsVertical();
594 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
595 0 : const bool bVertL2R = pUp->IsVertLR();
596 :
597 : //Follow the text flow.
598 : // #i70582#
599 : // --> OD 2009-03-05 - adopted for Support for Classical Mongolian Script
600 : const SwTwips nTopForObjPos =
601 : bVert
602 : ? ( bVertL2R
603 0 : ? ( pCnt->Frm().Left() +
604 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() )
605 0 : : ( pCnt->Frm().Left() +
606 0 : pCnt->Frm().Width() -
607 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() ) )
608 0 : : ( pCnt->Frm().Top() +
609 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() );
610 0 : if ( pUp->Frm().IsInside( rPt ) )
611 : {
612 : // <rPt> point is inside environment of given content frame
613 : // #i70582#
614 0 : if( bVert )
615 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
616 : {
617 0 : if ( bVertL2R )
618 0 : rRet.nMain = rPt.X() - nTopForObjPos;
619 : else
620 0 : rRet.nMain = nTopForObjPos - rPt.X();
621 : }
622 : else
623 0 : rRet.nMain = rPt.Y() - nTopForObjPos;
624 0 : return pCnt;
625 : }
626 0 : else if ( rPt.Y() <= pUp->Frm().Top() )
627 : {
628 : // <rPt> point is above environment of given content frame
629 : // correct for vertical layout?
630 0 : rRet.nMain = LONG_MAX;
631 : }
632 0 : else if( rPt.X() < pUp->Frm().Left() &&
633 0 : rPt.Y() <= ( bVert ? pUp->Frm().Top() : pUp->Frm().Bottom() ) )
634 : {
635 : // <rPt> point is left of environment of given content frame
636 : // seems not to be correct for vertical layout!?
637 0 : const SwFrm *pLay = pUp->GetLeaf( MAKEPAGE_NONE, sal_False, pCnt );
638 0 : if( !pLay ||
639 0 : (bVert && (pLay->Frm().Top() + pLay->Prt().Bottom()) <rPt.Y())||
640 0 : (!bVert && (pLay->Frm().Left() + pLay->Prt().Right())<rPt.X()) )
641 : {
642 : // <rPt> point is in left border of environment
643 : // #i70582#
644 0 : if( bVert )
645 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
646 : {
647 0 : if ( bVertL2R )
648 0 : rRet.nMain = rPt.X() - nTopForObjPos;
649 : else
650 0 : rRet.nMain = nTopForObjPos - rPt.X();
651 : }
652 : else
653 0 : rRet.nMain = rPt.Y() - nTopForObjPos;
654 0 : return pCnt;
655 : }
656 : else
657 0 : rRet.nMain = LONG_MAX;
658 : }
659 : else
660 : {
661 : // Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
662 : rRet.nMain = bVert
663 : ? ( bVertL2R
664 0 : ? ( (pUp->Frm().Left() + pUp->Prt().Right()) - nTopForObjPos )
665 0 : : ( nTopForObjPos - (pUp->Frm().Left() + pUp->Prt().Left() ) ) )
666 0 : : ( (pUp->Frm().Top() + pUp->Prt().Bottom()) - nTopForObjPos );
667 :
668 0 : const SwFrm *pPre = pCnt;
669 0 : const SwFrm *pLay = pUp->GetLeaf( MAKEPAGE_NONE, sal_True, pCnt );
670 0 : SwTwips nFrmTop = 0;
671 0 : SwTwips nPrtHeight = 0;
672 0 : bool bSct = false;
673 0 : const SwSectionFrm *pSect = pUp->FindSctFrm();
674 0 : if( pSect )
675 : {
676 0 : rRet.nSub = rRet.nMain;
677 0 : rRet.nMain = 0;
678 : }
679 0 : if( pSect && !pSect->IsAnLower( pLay ) )
680 : {
681 0 : bSct = false;
682 0 : const SwSectionFrm* pNxtSect = pLay ? pLay->FindSctFrm() : 0;
683 0 : if( pSect->IsAnFollow( pNxtSect ) )
684 : {
685 0 : if( pLay->IsVertical() )
686 : {
687 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
688 0 : if ( pLay->IsVertLR() )
689 0 : nFrmTop = pLay->Frm().Left();
690 : else
691 0 : nFrmTop = pLay->Frm().Left() + pLay->Frm().Width();
692 0 : nPrtHeight = pLay->Prt().Width();
693 : }
694 : else
695 : {
696 0 : nFrmTop = pLay->Frm().Top();
697 0 : nPrtHeight = pLay->Prt().Height();
698 : }
699 0 : pSect = pNxtSect;
700 : }
701 : else
702 : {
703 0 : pLay = pSect->GetUpper();
704 0 : if( pLay->IsVertical() )
705 : {
706 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
707 0 : if ( pLay->IsVertLR() )
708 : {
709 0 : nFrmTop = pSect->Frm().Right();
710 0 : nPrtHeight = pLay->Frm().Left() + pLay->Prt().Left()
711 0 : + pLay->Prt().Width() - pSect->Frm().Left()
712 0 : - pSect->Frm().Width();
713 : }
714 : else
715 : {
716 0 : nFrmTop = pSect->Frm().Left();
717 0 : nPrtHeight = pSect->Frm().Left() - pLay->Frm().Left()
718 0 : - pLay->Prt().Left();
719 : }
720 : }
721 : else
722 : {
723 0 : nFrmTop = pSect->Frm().Bottom();
724 0 : nPrtHeight = pLay->Frm().Top() + pLay->Prt().Top()
725 0 : + pLay->Prt().Height() - pSect->Frm().Top()
726 0 : - pSect->Frm().Height();
727 : }
728 0 : pSect = 0;
729 : }
730 : }
731 0 : else if( pLay )
732 : {
733 0 : if( pLay->IsVertical() )
734 : {
735 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
736 0 : if ( pLay->IsVertLR() )
737 : {
738 0 : nFrmTop = pLay->Frm().Left();
739 0 : nPrtHeight = pLay->Prt().Width();
740 : }
741 : else
742 : {
743 0 : nFrmTop = pLay->Frm().Left() + pLay->Frm().Width();
744 0 : nPrtHeight = pLay->Prt().Width();
745 : }
746 : }
747 : else
748 : {
749 0 : nFrmTop = pLay->Frm().Top();
750 0 : nPrtHeight = pLay->Prt().Height();
751 : }
752 0 : bSct = 0 != pSect;
753 : }
754 0 : while ( pLay && !pLay->Frm().IsInside( rPt ) &&
755 0 : ( pLay->Frm().Top() <= rPt.Y() || pLay->IsInFly() ||
756 0 : ( pLay->IsInSct() &&
757 0 : pLay->FindSctFrm()->GetUpper()->Frm().Top() <= rPt.Y())) )
758 : {
759 0 : if ( pLay->IsFtnContFrm() )
760 : {
761 0 : if ( !((SwLayoutFrm*)pLay)->Lower() )
762 : {
763 0 : SwFrm *pDel = (SwFrm*)pLay;
764 0 : pDel->Cut();
765 0 : delete pDel;
766 0 : return pPre;
767 : }
768 0 : return 0;
769 : }
770 : else
771 : {
772 0 : if( bSct || pSect )
773 0 : rRet.nSub += nPrtHeight;
774 : else
775 0 : rRet.nMain += nPrtHeight;
776 0 : pPre = pLay;
777 0 : pLay = pLay->GetLeaf( MAKEPAGE_NONE, sal_True, pCnt );
778 0 : if( pSect && !pSect->IsAnLower( pLay ) )
779 : { // If we're leaving a SwSectionFrm, the next Leaf-Frm
780 : // is the part of the upper below the SectionFrm.
781 : const SwSectionFrm* pNxtSect = pLay ?
782 0 : pLay->FindSctFrm() : NULL;
783 0 : bSct = false;
784 0 : if( pSect->IsAnFollow( pNxtSect ) )
785 : {
786 0 : pSect = pNxtSect;
787 0 : if( pLay->IsVertical() )
788 : {
789 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
790 0 : if ( pLay->IsVertLR() )
791 : {
792 0 : nFrmTop = pLay->Frm().Left();
793 0 : nPrtHeight = pLay->Prt().Width();
794 : }
795 : else
796 : {
797 0 : nFrmTop = pLay->Frm().Left() + pLay->Frm().Width();
798 0 : nPrtHeight = pLay->Prt().Width();
799 : }
800 : }
801 : else
802 : {
803 0 : nFrmTop = pLay->Frm().Top();
804 0 : nPrtHeight = pLay->Prt().Height();
805 : }
806 : }
807 : else
808 : {
809 0 : pLay = pSect->GetUpper();
810 0 : if( pLay->IsVertical() )
811 : {
812 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
813 0 : if ( pLay->IsVertLR() )
814 : {
815 0 : nFrmTop = pSect->Frm().Right();
816 0 : nPrtHeight = pLay->Frm().Left()+pLay->Prt().Left()
817 0 : + pLay->Prt().Width() - pSect->Frm().Left()
818 0 : - pSect->Frm().Width();
819 : }
820 : else
821 : {
822 0 : nFrmTop = pSect->Frm().Left();
823 0 : nPrtHeight = pSect->Frm().Left() -
824 0 : pLay->Frm().Left() - pLay->Prt().Left();
825 : }
826 : }
827 : else
828 : {
829 0 : nFrmTop = pSect->Frm().Bottom();
830 0 : nPrtHeight = pLay->Frm().Top()+pLay->Prt().Top()
831 0 : + pLay->Prt().Height() - pSect->Frm().Top()
832 0 : - pSect->Frm().Height();
833 : }
834 0 : pSect = 0;
835 : }
836 : }
837 0 : else if( pLay )
838 : {
839 0 : if( pLay->IsVertical() )
840 : {
841 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
842 0 : if ( pLay->IsVertLR() )
843 : {
844 0 : nFrmTop = pLay->Frm().Left();
845 0 : nPrtHeight = pLay->Prt().Width();
846 : }
847 : else
848 : {
849 0 : nFrmTop = pLay->Frm().Left() + pLay->Frm().Width();
850 0 : nPrtHeight = pLay->Prt().Width();
851 : }
852 : }
853 : else
854 : {
855 0 : nFrmTop = pLay->Frm().Top();
856 0 : nPrtHeight = pLay->Prt().Height();
857 : }
858 0 : bSct = 0 != pSect;
859 : }
860 : }
861 : }
862 0 : if ( pLay )
863 : {
864 0 : if ( pLay->Frm().IsInside( rPt ) )
865 : {
866 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
867 0 : SwTwips nDiff = pLay->IsVertical() ? ( pLay->IsVertLR() ? ( rPt.X() - nFrmTop ) : ( nFrmTop - rPt.X() ) )
868 0 : : ( rPt.Y() - nFrmTop );
869 0 : if( bSct || pSect )
870 0 : rRet.nSub += nDiff;
871 : else
872 0 : rRet.nMain += nDiff;
873 : }
874 0 : if ( pLay->IsFtnContFrm() && !((SwLayoutFrm*)pLay)->Lower() )
875 : {
876 0 : SwFrm *pDel = (SwFrm*)pLay;
877 0 : pDel->Cut();
878 0 : delete pDel;
879 0 : return 0;
880 : }
881 0 : return pLay;
882 : }
883 : else
884 0 : rRet.nMain = LONG_MAX;
885 : }
886 : }
887 0 : return 0;
888 : }
889 :
890 0 : static sal_uLong lcl_FindCntDiff( const Point &rPt, const SwLayoutFrm *pLay,
891 : const SwCntntFrm *& rpCnt,
892 : const bool bBody, const sal_Bool bFtn )
893 : {
894 : // Searches below pLay the nearest Cnt to the point. The reference point of
895 : //the Cntnts is always the left upper corner.
896 : //The Cnt should preferably be above the point.
897 :
898 : #if OSL_DEBUG_LEVEL > 1
899 : Point arPoint( rPt );
900 : #endif
901 :
902 0 : rpCnt = 0;
903 0 : sal_uLong nDistance = ULONG_MAX;
904 0 : sal_uLong nNearest = ULONG_MAX;
905 0 : const SwCntntFrm *pCnt = pLay->ContainsCntnt();
906 :
907 0 : while ( pCnt && (bBody != pCnt->IsInDocBody() || bFtn != pCnt->IsInFtn()))
908 : {
909 0 : pCnt = pCnt->GetNextCntntFrm();
910 0 : if ( !pLay->IsAnLower( pCnt ) )
911 0 : pCnt = 0;
912 : }
913 0 : const SwCntntFrm *pNearest = pCnt;
914 0 : if ( pCnt )
915 : {
916 0 : do
917 : {
918 : //Calculate the distance between those two points.
919 : //'delta' X^2 + 'delta' Y^2 = 'distance'^2
920 0 : sal_uInt32 dX = Max( pCnt->Frm().Left(), rPt.X() ) -
921 0 : Min( pCnt->Frm().Left(), rPt.X() ),
922 0 : dY = Max( pCnt->Frm().Top(), rPt.Y() ) -
923 0 : Min( pCnt->Frm().Top(), rPt.Y() );
924 0 : BigInt dX1( dX ), dY1( dY );
925 0 : dX1 *= dX1; dY1 *= dY1;
926 0 : const sal_uLong nDiff = ::SqRt( dX1 + dY1 );
927 0 : if ( pCnt->Frm().Top() <= rPt.Y() )
928 : {
929 0 : if ( nDiff < nDistance )
930 : {
931 : //This one is the nearer one
932 0 : nDistance = nNearest = nDiff;
933 0 : rpCnt = pNearest = pCnt;
934 : }
935 : }
936 0 : else if ( nDiff < nNearest )
937 : {
938 0 : nNearest = nDiff;
939 0 : pNearest = pCnt;
940 : }
941 0 : pCnt = pCnt->GetNextCntntFrm();
942 0 : while ( pCnt &&
943 0 : (bBody != pCnt->IsInDocBody() || bFtn != pCnt->IsInFtn()))
944 0 : pCnt = pCnt->GetNextCntntFrm();
945 :
946 0 : } while ( pCnt && pLay->IsAnLower( pCnt ) );
947 : }
948 0 : if ( nDistance == ULONG_MAX )
949 0 : { rpCnt = pNearest;
950 0 : return nNearest;
951 : }
952 0 : return nDistance;
953 : }
954 :
955 0 : static const SwCntntFrm * lcl_FindCnt( const Point &rPt, const SwCntntFrm *pCnt,
956 : const bool bBody, const sal_Bool bFtn )
957 : {
958 : //Starting from pCnt searches the CntntFrm whose left upper corner is the
959 : //nearest to the point.
960 : //Always returns a CntntFrm.
961 :
962 : //First the nearest Cntnt inside the page which contains the Cntnt is
963 : //searched. Starting from this page the pages in both directions need to
964 : //be considered. If possible a Cntnt is returned whose Y-position is
965 : //above the point.
966 : const SwCntntFrm *pRet, *pNew;
967 0 : const SwLayoutFrm *pLay = pCnt->FindPageFrm();
968 : sal_uLong nDist;
969 :
970 0 : nDist = ::lcl_FindCntDiff( rPt, pLay, pNew, bBody, bFtn );
971 0 : if ( pNew )
972 0 : pRet = pNew;
973 : else
974 0 : { pRet = pCnt;
975 0 : nDist = ULONG_MAX;
976 : }
977 0 : const SwCntntFrm *pNearest = pRet;
978 0 : sal_uLong nNearest = nDist;
979 :
980 0 : if ( pLay )
981 : {
982 0 : const SwLayoutFrm *pPge = pLay;
983 0 : sal_uLong nOldNew = ULONG_MAX;
984 0 : for ( sal_uInt16 i = 0; pPge->GetPrev() && (i < 3); ++i )
985 : {
986 0 : pPge = (SwLayoutFrm*)pPge->GetPrev();
987 0 : const sal_uLong nNew = ::lcl_FindCntDiff( rPt, pPge, pNew, bBody, bFtn );
988 0 : if ( nNew < nDist )
989 : {
990 0 : if ( pNew->Frm().Top() <= rPt.Y() )
991 : {
992 0 : pRet = pNearest = pNew;
993 0 : nDist = nNearest = nNew;
994 : }
995 0 : else if ( nNew < nNearest )
996 : {
997 0 : pNearest = pNew;
998 0 : nNearest = nNew;
999 : }
1000 : }
1001 0 : else if ( nOldNew != ULONG_MAX && nNew > nOldNew )
1002 0 : break;
1003 : else
1004 0 : nOldNew = nNew;
1005 :
1006 : }
1007 0 : pPge = pLay;
1008 0 : nOldNew = ULONG_MAX;
1009 0 : for ( sal_uInt16 j = 0; pPge->GetNext() && (j < 3); ++j )
1010 : {
1011 0 : pPge = (SwLayoutFrm*)pPge->GetNext();
1012 0 : const sal_uLong nNew = ::lcl_FindCntDiff( rPt, pPge, pNew, bBody, bFtn );
1013 0 : if ( nNew < nDist )
1014 : {
1015 0 : if ( pNew->Frm().Top() <= rPt.Y() )
1016 : {
1017 0 : pRet = pNearest = pNew;
1018 0 : nDist = nNearest = nNew;
1019 : }
1020 0 : else if ( nNew < nNearest )
1021 : {
1022 0 : pNearest = pNew;
1023 0 : nNearest = nNew;
1024 : }
1025 : }
1026 0 : else if ( nOldNew != ULONG_MAX && nNew > nOldNew )
1027 0 : break;
1028 : else
1029 0 : nOldNew = nNew;
1030 : }
1031 : }
1032 0 : if ( (pRet->Frm().Top() > rPt.Y()) )
1033 0 : return pNearest;
1034 : else
1035 0 : return pRet;
1036 : }
1037 :
1038 0 : static void lcl_PointToPrt( Point &rPoint, const SwFrm *pFrm )
1039 : {
1040 0 : SwRect aTmp( pFrm->Prt() );
1041 0 : aTmp += pFrm->Frm().Pos();
1042 0 : if ( rPoint.X() < aTmp.Left() )
1043 0 : rPoint.X() = aTmp.Left();
1044 0 : else if ( rPoint.X() > aTmp.Right() )
1045 0 : rPoint.X() = aTmp.Right();
1046 0 : if ( rPoint.Y() < aTmp.Top() )
1047 0 : rPoint.Y() = aTmp.Top();
1048 0 : else if ( rPoint.Y() > aTmp.Bottom() )
1049 0 : rPoint.Y() = aTmp.Bottom();
1050 :
1051 0 : }
1052 :
1053 0 : const SwCntntFrm *FindAnchor( const SwFrm *pOldAnch, const Point &rNew,
1054 : const sal_Bool bBodyOnly )
1055 : {
1056 : //Search the nearest Cnt around the given document position in the text
1057 : //flow. The given anchor is the starting Frm.
1058 : const SwCntntFrm* pCnt;
1059 0 : if ( pOldAnch->IsCntntFrm() )
1060 : {
1061 0 : pCnt = (const SwCntntFrm*)pOldAnch;
1062 : }
1063 : else
1064 : {
1065 0 : Point aTmp( rNew );
1066 0 : SwLayoutFrm *pTmpLay = (SwLayoutFrm*)pOldAnch;
1067 0 : if( pTmpLay->IsRootFrm() )
1068 : {
1069 0 : SwRect aTmpRect( aTmp, Size(0,0) );
1070 0 : pTmpLay = (SwLayoutFrm*)::FindPage( aTmpRect, pTmpLay->Lower() );
1071 : }
1072 0 : pCnt = pTmpLay->GetCntntPos( aTmp, sal_False, bBodyOnly );
1073 : }
1074 :
1075 : //Take care to use meaningful ranges during search. This means to not enter
1076 : //or leave header/footer in this case.
1077 0 : const bool bBody = pCnt->IsInDocBody() || bBodyOnly;
1078 0 : const sal_Bool bFtn = !bBodyOnly && pCnt->IsInFtn();
1079 :
1080 0 : Point aNew( rNew );
1081 0 : if ( bBody )
1082 : {
1083 : //#38848 drag from page margin into the body.
1084 0 : const SwFrm *pPage = pCnt->FindPageFrm();
1085 0 : ::lcl_PointToPrt( aNew, pPage->GetUpper() );
1086 0 : SwRect aTmp( aNew, Size( 0, 0 ) );
1087 0 : pPage = ::FindPage( aTmp, pPage );
1088 0 : ::lcl_PointToPrt( aNew, pPage );
1089 : }
1090 :
1091 0 : if ( pCnt->IsInDocBody() == bBody && pCnt->Frm().IsInside( aNew ) )
1092 0 : return pCnt;
1093 0 : else if ( pOldAnch->IsInDocBody() || pOldAnch->IsPageFrm() )
1094 : {
1095 : // Maybe the selected anchor is on the same page as the current anchor.
1096 : // With this we won't run into problems with the columns.
1097 0 : Point aTmp( aNew );
1098 0 : const SwCntntFrm *pTmp = pCnt->FindPageFrm()->
1099 0 : GetCntntPos( aTmp, sal_False, sal_True, sal_False );
1100 0 : if ( pTmp && pTmp->Frm().IsInside( aNew ) )
1101 0 : return pTmp;
1102 : }
1103 :
1104 : //Starting from the anchor we now search in both directions until we found
1105 : //the nearest one respectively.
1106 : //Not the direct distance is relevant but the distance which needs to be
1107 : //traveled through the text flow.
1108 : const SwCntntFrm *pUpLst;
1109 0 : const SwCntntFrm *pUpFrm = pCnt;
1110 0 : SwDistance nUp, nUpLst;
1111 0 : ::lcl_CalcDownDist( nUp, aNew, pUpFrm );
1112 0 : SwDistance nDown = nUp;
1113 0 : bool bNegAllowed = true;// Make it possible to leave the negative section once.
1114 0 : do
1115 : {
1116 0 : pUpLst = pUpFrm; nUpLst = nUp;
1117 0 : pUpFrm = pUpLst->GetPrevCntntFrm();
1118 0 : while ( pUpFrm &&
1119 0 : (bBody != pUpFrm->IsInDocBody() || bFtn != pUpFrm->IsInFtn()))
1120 0 : pUpFrm = pUpFrm->GetPrevCntntFrm();
1121 0 : if ( pUpFrm )
1122 : {
1123 0 : ::lcl_CalcDownDist( nUp, aNew, pUpFrm );
1124 : //It makes sense to search further, if the distance grows inside
1125 : //a table.
1126 0 : if ( pUpLst->IsInTab() && pUpFrm->IsInTab() )
1127 : {
1128 0 : while ( pUpFrm && ((nUpLst < nUp && pUpFrm->IsInTab()) ||
1129 0 : bBody != pUpFrm->IsInDocBody()) )
1130 : {
1131 0 : pUpFrm = pUpFrm->GetPrevCntntFrm();
1132 0 : if ( pUpFrm )
1133 0 : ::lcl_CalcDownDist( nUp, aNew, pUpFrm );
1134 : }
1135 : }
1136 : }
1137 0 : if ( !pUpFrm )
1138 0 : nUp.nMain = LONG_MAX;
1139 0 : if ( nUp.nMain >= 0 && LONG_MAX != nUp.nMain )
1140 : {
1141 0 : bNegAllowed = false;
1142 0 : if ( nUpLst.nMain < 0 ) //don't take the wrong one, if the value
1143 : //just changed from negative to positive.
1144 0 : { pUpLst = pUpFrm;
1145 0 : nUpLst = nUp;
1146 : }
1147 : }
1148 0 : } while ( pUpFrm && ( ( bNegAllowed && nUp.nMain < 0 ) || ( nUp <= nUpLst ) ) );
1149 :
1150 : const SwCntntFrm *pDownLst;
1151 0 : const SwCntntFrm *pDownFrm = pCnt;
1152 0 : SwDistance nDownLst;
1153 0 : if ( nDown.nMain < 0 )
1154 0 : nDown.nMain = LONG_MAX;
1155 0 : do
1156 : {
1157 0 : pDownLst = pDownFrm; nDownLst = nDown;
1158 0 : pDownFrm = pDownLst->GetNextCntntFrm();
1159 0 : while ( pDownFrm &&
1160 0 : (bBody != pDownFrm->IsInDocBody() || bFtn != pDownFrm->IsInFtn()))
1161 0 : pDownFrm = pDownFrm->GetNextCntntFrm();
1162 0 : if ( pDownFrm )
1163 : {
1164 0 : ::lcl_CalcDownDist( nDown, aNew, pDownFrm );
1165 0 : if ( nDown.nMain < 0 )
1166 0 : nDown.nMain = LONG_MAX;
1167 : //It makes sense to search further, if the distance grows inside
1168 : //a table.
1169 0 : if ( pDownLst->IsInTab() && pDownFrm->IsInTab() )
1170 : {
1171 0 : while ( pDownFrm && ( ( nDown.nMain != LONG_MAX && pDownFrm->IsInTab()) || bBody != pDownFrm->IsInDocBody() ) )
1172 : {
1173 0 : pDownFrm = pDownFrm->GetNextCntntFrm();
1174 0 : if ( pDownFrm )
1175 0 : ::lcl_CalcDownDist( nDown, aNew, pDownFrm );
1176 0 : if ( nDown.nMain < 0 )
1177 0 : nDown.nMain = LONG_MAX;
1178 : }
1179 : }
1180 : }
1181 0 : if ( !pDownFrm )
1182 0 : nDown.nMain = LONG_MAX;
1183 :
1184 0 : } while ( pDownFrm && nDown <= nDownLst &&
1185 : nDown.nMain != LONG_MAX && nDownLst.nMain != LONG_MAX );
1186 :
1187 : //If we couldn't find one in both directions, we'll search the Cntnt whose
1188 : //left upper corner is the nearest to the point. Such a situation may
1189 : //happen, if the point doesn't lay in the text flow but in any margin.
1190 0 : if ( nDownLst.nMain == LONG_MAX && nUpLst.nMain == LONG_MAX )
1191 : {
1192 : // If an OLE objects, which is contained in a fly frame
1193 : // is resized in inplace mode and the new Position is outside the
1194 : // fly frame, we do not want to leave our fly frame.
1195 0 : if ( pCnt->IsInFly() )
1196 0 : return pCnt;
1197 :
1198 0 : return ::lcl_FindCnt( aNew, pCnt, bBody, bFtn );
1199 : }
1200 : else
1201 0 : return nDownLst < nUpLst ? pDownLst : pUpLst;
1202 : }
1203 :
1204 : /*************************************************************************
1205 : |*
1206 : |* SwFlyAtCntFrm::SetAbsPos()
1207 : |*
1208 : |*************************************************************************/
1209 :
1210 0 : void SwFlyAtCntFrm::SetAbsPos( const Point &rNew )
1211 : {
1212 0 : SwPageFrm *pOldPage = FindPageFrm();
1213 0 : const SwRect aOld( GetObjRectWithSpaces() );
1214 0 : Point aNew( rNew );
1215 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
1216 0 : if( ( GetAnchorFrm()->IsVertical() && !GetAnchorFrm()->IsVertLR() ) || GetAnchorFrm()->IsRightToLeft() )
1217 0 : aNew.X() += Frm().Width();
1218 0 : SwCntntFrm *pCnt = (SwCntntFrm*)::FindAnchor( GetAnchorFrm(), aNew );
1219 0 : if( pCnt->IsProtected() )
1220 0 : pCnt = (SwCntntFrm*)GetAnchorFrm();
1221 :
1222 0 : SwPageFrm *pTmpPage = 0;
1223 0 : const bool bVert = pCnt->IsVertical();
1224 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
1225 0 : const bool bVertL2R = pCnt->IsVertLR();
1226 0 : const sal_Bool bRTL = pCnt->IsRightToLeft();
1227 :
1228 0 : if( ( !bVert != !GetAnchorFrm()->IsVertical() ) ||
1229 0 : ( !bRTL != !GetAnchorFrm()->IsRightToLeft() ) )
1230 : {
1231 0 : if( bVert || bRTL )
1232 0 : aNew.X() += Frm().Width();
1233 : else
1234 0 : aNew.X() -= Frm().Width();
1235 : }
1236 :
1237 0 : if ( pCnt->IsInDocBody() )
1238 : {
1239 : //#38848 drag from page margin into the body.
1240 0 : pTmpPage = pCnt->FindPageFrm();
1241 0 : ::lcl_PointToPrt( aNew, pTmpPage->GetUpper() );
1242 0 : SwRect aTmp( aNew, Size( 0, 0 ) );
1243 0 : pTmpPage = (SwPageFrm*)::FindPage( aTmp, pTmpPage );
1244 0 : ::lcl_PointToPrt( aNew, pTmpPage );
1245 : }
1246 :
1247 : //Setup RelPos, only invalidate if requested.
1248 : //rNew is an absolute position. We need to calculate the distance from rNew
1249 : //to the anchor inside the text flow to correctly set RelPos.
1250 : //!!!!!We can optimize here: FindAnchor could also return RelPos!
1251 0 : const SwFrm *pFrm = 0;
1252 : SwTwips nY;
1253 0 : if ( pCnt->Frm().IsInside( aNew ) )
1254 : {
1255 : // #i70582#
1256 : const SwTwips nTopForObjPos =
1257 : bVert
1258 : ? ( bVertL2R
1259 0 : ? ( pCnt->Frm().Left() +
1260 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() )
1261 0 : : ( pCnt->Frm().Left() +
1262 0 : pCnt->Frm().Width() -
1263 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() ) )
1264 0 : : ( pCnt->Frm().Top() +
1265 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() );
1266 0 : if( bVert )
1267 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
1268 : {
1269 0 : if ( bVertL2R )
1270 0 : nY = rNew.X() - nTopForObjPos;
1271 : else
1272 0 : nY = nTopForObjPos - rNew.X() - Frm().Width();
1273 : }
1274 : else
1275 : {
1276 0 : nY = rNew.Y() - nTopForObjPos;
1277 : }
1278 : }
1279 : else
1280 : {
1281 0 : SwDistance aDist;
1282 0 : pFrm = ::lcl_CalcDownDist( aDist, aNew, pCnt );
1283 0 : nY = aDist.nMain + aDist.nSub;
1284 : }
1285 :
1286 0 : SwTwips nX = 0;
1287 :
1288 0 : if ( pCnt->IsFollow() )
1289 : {
1290 : // Flys are never attached to the follow but always to the master,
1291 : // which we're going to search now.
1292 0 : const SwCntntFrm *pOriginal = pCnt;
1293 0 : const SwCntntFrm *pFollow = pCnt;
1294 0 : while ( pCnt->IsFollow() )
1295 : {
1296 0 : do
1297 0 : { pCnt = pCnt->GetPrevCntntFrm();
1298 0 : } while ( pCnt->GetFollow() != pFollow );
1299 0 : pFollow = pCnt;
1300 : }
1301 0 : SwTwips nDiff = 0;
1302 0 : do
1303 0 : { const SwFrm *pUp = pFollow->GetUpper();
1304 0 : if( pUp->IsVertical() )
1305 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
1306 : {
1307 0 : if ( pUp->IsVertLR() )
1308 0 : nDiff += pUp->Prt().Width() - pFollow->GetRelPos().X();
1309 : else
1310 0 : nDiff += pFollow->Frm().Left() + pFollow->Frm().Width()
1311 0 : - pUp->Frm().Left() - pUp->Prt().Left();
1312 : }
1313 : else
1314 0 : nDiff += pUp->Prt().Height() - pFollow->GetRelPos().Y();
1315 0 : pFollow = pFollow->GetFollow();
1316 : } while ( pFollow != pOriginal );
1317 0 : nY += nDiff;
1318 0 : if( bVert )
1319 0 : nX = pCnt->Frm().Top() - pOriginal->Frm().Top();
1320 : else
1321 0 : nX = pCnt->Frm().Left() - pOriginal->Frm().Left();
1322 : }
1323 :
1324 0 : if ( nY == LONG_MAX )
1325 : {
1326 : // #i70582#
1327 : const SwTwips nTopForObjPos =
1328 : bVert
1329 : ? ( bVertL2R
1330 0 : ? ( pCnt->Frm().Left() +
1331 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() )
1332 0 : : ( pCnt->Frm().Left() +
1333 0 : pCnt->Frm().Width() -
1334 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() ) )
1335 0 : : ( pCnt->Frm().Top() +
1336 0 : pCnt->GetUpperSpaceAmountConsideredForPrevFrmAndPageGrid() );
1337 0 : if( bVert )
1338 : //Badaa: 2008-04-18 * Support for Classical Mongolian Script (SCMS) joint with Jiayanmin
1339 : {
1340 0 : if ( bVertL2R )
1341 0 : nY = rNew.X() - nTopForObjPos;
1342 : else
1343 0 : nY = nTopForObjPos - rNew.X();
1344 : }
1345 : else
1346 : {
1347 0 : nY = rNew.Y() - nTopForObjPos;
1348 : }
1349 : }
1350 :
1351 0 : SwFlyFrmFmt *pFmt = (SwFlyFrmFmt*)GetFmt();
1352 0 : const SwFmtSurround& rSurround = pFmt->GetSurround();
1353 : const sal_Bool bWrapThrough =
1354 0 : rSurround.GetSurround() == SURROUND_THROUGHT;
1355 0 : SwTwips nBaseOfstForFly = 0;
1356 0 : const SwFrm* pTmpFrm = pFrm ? pFrm : pCnt;
1357 0 : if ( pTmpFrm->IsTxtFrm() )
1358 : nBaseOfstForFly =
1359 0 : ((SwTxtFrm*)pTmpFrm)->GetBaseOfstForFly( !bWrapThrough );
1360 :
1361 0 : if( bVert )
1362 : {
1363 0 : if( !pFrm )
1364 0 : nX += rNew.Y() - pCnt->Frm().Top() - nBaseOfstForFly;
1365 : else
1366 0 : nX = rNew.Y() - pFrm->Frm().Top() - nBaseOfstForFly;
1367 : }
1368 : else
1369 : {
1370 0 : if( !pFrm )
1371 : {
1372 0 : if ( pCnt->IsRightToLeft() )
1373 0 : nX += pCnt->Frm().Right() - rNew.X() - Frm().Width() +
1374 0 : nBaseOfstForFly;
1375 : else
1376 0 : nX += rNew.X() - pCnt->Frm().Left() - nBaseOfstForFly;
1377 : }
1378 : else
1379 : {
1380 0 : if ( pFrm->IsRightToLeft() )
1381 0 : nX += pFrm->Frm().Right() - rNew.X() - Frm().Width() +
1382 0 : nBaseOfstForFly;
1383 : else
1384 0 : nX = rNew.X() - pFrm->Frm().Left() - nBaseOfstForFly;
1385 : }
1386 : }
1387 0 : GetFmt()->GetDoc()->GetIDocumentUndoRedo().StartUndo( UNDO_START, NULL );
1388 :
1389 0 : if( pCnt != GetAnchorFrm() || ( IsAutoPos() && pCnt->IsTxtFrm() &&
1390 0 : GetFmt()->getIDocumentSettingAccess()->get(IDocumentSettingAccess::HTML_MODE)) )
1391 : {
1392 : //Set the anchor attribute according to the new Cnt.
1393 0 : SwFmtAnchor aAnch( pFmt->GetAnchor() );
1394 0 : SwPosition *pPos = (SwPosition*)aAnch.GetCntntAnchor();
1395 0 : if( IsAutoPos() && pCnt->IsTxtFrm() )
1396 : {
1397 0 : SwCrsrMoveState eTmpState( MV_SETONLYTEXT );
1398 0 : Point aPt( rNew );
1399 0 : if( pCnt->GetCrsrOfst( pPos, aPt, &eTmpState )
1400 0 : && pPos->nNode == *pCnt->GetNode() )
1401 : {
1402 0 : ResetLastCharRectHeight();
1403 0 : if( text::RelOrientation::CHAR == pFmt->GetVertOrient().GetRelationOrient() )
1404 0 : nY = LONG_MAX;
1405 0 : if( text::RelOrientation::CHAR == pFmt->GetHoriOrient().GetRelationOrient() )
1406 0 : nX = LONG_MAX;
1407 : }
1408 : else
1409 : {
1410 0 : pPos->nNode = *pCnt->GetNode();
1411 0 : pPos->nContent.Assign( pCnt->GetNode(), 0 );
1412 : }
1413 : }
1414 : else
1415 : {
1416 0 : pPos->nNode = *pCnt->GetNode();
1417 0 : pPos->nContent.Assign( pCnt->GetNode(), 0 );
1418 : }
1419 :
1420 : // handle change of anchor node:
1421 : // if count of the anchor frame also change, the fly frames have to be
1422 : // re-created. Thus, delete all fly frames except the <this> before the
1423 : // anchor attribute is change and re-create them afterwards.
1424 : {
1425 0 : SwHandleAnchorNodeChg aHandleAnchorNodeChg( *pFmt, aAnch, this );
1426 0 : pFmt->GetDoc()->SetAttr( aAnch, *pFmt );
1427 0 : }
1428 : }
1429 : // #i28701# - use new method <GetPageFrm()>
1430 0 : else if ( pTmpPage && pTmpPage != GetPageFrm() )
1431 0 : GetPageFrm()->MoveFly( this, pTmpPage );
1432 :
1433 0 : const Point aRelPos = bVert ? Point( -nY, nX ) : Point( nX, nY );
1434 :
1435 0 : ChgRelPos( aRelPos );
1436 :
1437 0 : GetFmt()->GetDoc()->GetIDocumentUndoRedo().EndUndo( UNDO_END, NULL );
1438 :
1439 0 : if ( pOldPage != FindPageFrm() )
1440 0 : ::Notify_Background( GetVirtDrawObj(), pOldPage, aOld, PREP_FLY_LEAVE,
1441 0 : sal_False );
1442 0 : }
1443 :
1444 : /** method to assure that anchored object is registered at the correct
1445 : page frame
1446 :
1447 : #i28701#
1448 : takes over functionality of deleted method <SwFlyAtCntFrm::AssertPage()>
1449 : */
1450 82 : void SwFlyAtCntFrm::RegisterAtCorrectPage()
1451 : {
1452 82 : SwPageFrm* pPageFrm( 0L );
1453 82 : if ( GetVertPosOrientFrm() )
1454 : {
1455 82 : pPageFrm = const_cast<SwPageFrm*>(GetVertPosOrientFrm()->FindPageFrm());
1456 : }
1457 82 : if ( pPageFrm && GetPageFrm() != pPageFrm )
1458 : {
1459 0 : if ( GetPageFrm() )
1460 0 : GetPageFrm()->MoveFly( this, pPageFrm );
1461 : else
1462 0 : pPageFrm->AppendFlyToPage( this );
1463 : }
1464 82 : }
1465 :
1466 : // #i26791#
1467 : //void SwFlyAtCntFrm::MakeFlyPos()
1468 82 : void SwFlyAtCntFrm::MakeObjPos()
1469 : {
1470 : // if fly frame position is valid, nothing is to do. Thus, return
1471 82 : if ( bValidPos )
1472 : {
1473 : return;
1474 : }
1475 :
1476 : // #i26791# - validate position flag here.
1477 82 : bValidPos = sal_True;
1478 :
1479 : // #i35911# - no calculation of new position, if
1480 : // anchored object is marked that it clears its environment and its
1481 : // environment is already cleared.
1482 : // before checking for cleared environment
1483 : // check, if member <mpVertPosOrientFrm> is set.
1484 110 : if ( GetVertPosOrientFrm() &&
1485 28 : ClearedEnvironment() && HasClearedEnvironment() )
1486 : {
1487 : return;
1488 : }
1489 :
1490 : // use new class to position object
1491 : objectpositioning::SwToCntntAnchoredObjectPosition
1492 82 : aObjPositioning( *GetVirtDrawObj() );
1493 82 : aObjPositioning.CalcPosition();
1494 :
1495 82 : SetVertPosOrientFrm ( aObjPositioning.GetVertPosOrientFrm() );
1496 : }
1497 :
1498 : // #i28701#
1499 66 : bool SwFlyAtCntFrm::_InvalidationAllowed( const InvalidationType _nInvalid ) const
1500 : {
1501 66 : bool bAllowed( SwFlyFreeFrm::_InvalidationAllowed( _nInvalid ) );
1502 :
1503 : // forbiddance of base instance can't be over ruled.
1504 66 : if ( bAllowed )
1505 : {
1506 66 : if ( _nInvalid == INVALID_POS ||
1507 : _nInvalid == INVALID_ALL )
1508 : {
1509 42 : bAllowed = InvalidationOfPosAllowed();
1510 : }
1511 : }
1512 :
1513 66 : return bAllowed;
1514 : }
1515 :
1516 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|