Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <vcl/window.hxx>
21 :
22 : #include "hintids.hxx"
23 : #include "viewsh.hxx"
24 : #include "virtoutp.hxx"
25 : #include "viewopt.hxx"
26 : #include "rootfrm.hxx"
27 : // OD 12.11.2002 #96272# - include declaration for <SetMappingForVirtDev>
28 : #include "setmapvirtdev.hxx"
29 :
30 : #if OSL_DEBUG_LEVEL > 1
31 :
32 : /*************************************************************************
33 : * class DbgRect
34 : *************************************************************************/
35 :
36 : class DbgRect
37 : {
38 : OutputDevice *pOut;
39 : public:
40 : DbgRect( OutputDevice *pOut, const Rectangle &rRect,
41 : const ColorData eColor = COL_LIGHTBLUE );
42 : };
43 :
44 : inline DbgRect::DbgRect( OutputDevice *pOutDev, const Rectangle &rRect,
45 : const ColorData eColor )
46 : :pOut( pOutDev )
47 : {
48 : if( pOut )
49 : {
50 : pOut->Push( PUSH_FILLCOLOR|PUSH_LINECOLOR );
51 : pOut->SetLineColor( eColor );
52 : pOut->SetFillColor();
53 : pOut->DrawRect( rRect );
54 : pOut->Pop();
55 : }
56 : }
57 :
58 : #endif
59 :
60 : /* The SWLayVout class manages the virtual output devices.
61 : * RootFrm has a static member of this class which is created in _FrmInit
62 : * and destroyed in _FrmFinit.
63 : * */
64 :
65 0 : sal_Bool SwRootFrm::FlushVout()
66 : {
67 0 : if( SwRootFrm::pVout->IsFlushable() )
68 : {
69 0 : SwRootFrm::pVout->_Flush();
70 0 : return sal_True;
71 : }
72 0 : return sal_False;
73 : }
74 :
75 174 : sal_Bool SwRootFrm::HasSameRect( const SwRect& rRect )
76 : {
77 174 : if( SwRootFrm::pVout->IsFlushable() )
78 0 : return ( rRect == SwRootFrm::pVout->GetOrgRect() );
79 174 : return sal_False;
80 : }
81 :
82 : /** method to set mapping/pixel offset for virtual output device
83 :
84 : OD 12.11.2002 #96272# - method implements two solutions for the mapping of
85 : the virtual output device:
86 : The old solution set the origin of the mapping mode, which will be used in
87 : the virtual output device. This causes several paint errors, because of the
88 : different roundings in the virtual output device and the original output device.
89 : The new solution avoids the rounding differences between virtual and original
90 : output device by setting a pixel offset at the virtual output device.
91 : A define controls, which solution is used, in order to switch in escalation
92 : back to old solution.
93 :
94 : @author OD
95 :
96 : @param _pOrgOutDev
97 : input parameter - constant instance of the original output device, for which
98 : the virtual output device is created.
99 :
100 : @param _pVirDev
101 : input/output parameter - instance of the virtual output device.
102 :
103 : @param _pMapMode
104 : input/output parameter - instance of the mapping mode, which will be set
105 : at the virtual output device.
106 :
107 : @param _rNewOrigin
108 : input parameter - constant instance of the origin, which will be used in
109 : the virtual output device
110 : */
111 : // define to control, if old or new solution for setting the mapping for
112 : // an virtual output device is used.
113 0 : void SetMappingForVirtDev( const Point& _rNewOrigin,
114 : MapMode* ,
115 : const OutputDevice* _pOrgOutDev,
116 : VirtualDevice* _pVirDev )
117 : {
118 : // new solution: set pixel offset at virtual output device
119 0 : Point aPixelOffset = _pOrgOutDev->LogicToPixel( _rNewOrigin );
120 0 : _pVirDev->SetPixelOffset( Size( -aPixelOffset.X(), -aPixelOffset.Y() ) );
121 0 : }
122 :
123 :
124 : /*************************************************************************
125 : * SwVOut::DoesFit()
126 : *************************************************************************/
127 :
128 : // rSize must be pixel coordinates!
129 0 : sal_Bool SwLayVout::DoesFit( const Size &rNew )
130 : {
131 0 : if( rNew.Height() > VIRTUALHEIGHT )
132 0 : return sal_False;
133 0 : if( rNew.Width() <= 0 || rNew.Height() <= 0 )
134 0 : return sal_False;
135 0 : if( rNew.Width() <= aSize.Width() )
136 0 : return sal_True;
137 0 : if( !pVirDev )
138 : {
139 0 : pVirDev = new VirtualDevice();
140 0 : pVirDev->SetLineColor();
141 0 : if( pOut )
142 : {
143 0 : if( pVirDev->GetFillColor() != pOut->GetFillColor() )
144 0 : pVirDev->SetFillColor( pOut->GetFillColor() );
145 : }
146 : }
147 :
148 0 : if( rNew.Width() > aSize.Width() )
149 : {
150 0 : aSize.Width() = rNew.Width();
151 0 : if( !pVirDev->SetOutputSizePixel( aSize ) )
152 : {
153 0 : delete pVirDev;
154 0 : pVirDev = NULL;
155 0 : aSize.Width() = 0;
156 0 : return sal_False;
157 : }
158 : }
159 0 : return sal_True;
160 : }
161 :
162 : /*************************************************************************
163 : * SwLayVout::Enter
164 : *************************************************************************/
165 : /// OD 27.09.2002 #103636# - change 2nd parameter <rRect> - no longer <const>
166 : /// in order to return value of class member variable <aRect>, if virtual
167 : /// output is used.
168 : /// <aRect> contains the rectangle that represents the area the virtual
169 : /// output device is used for and that is flushed at the end.
170 0 : void SwLayVout::Enter( ViewShell *pShell, SwRect &rRect, sal_Bool bOn )
171 : {
172 0 : Flush();
173 :
174 : #ifdef DBG_UTIL
175 : if( pShell->GetViewOptions()->IsTest3() )
176 : {
177 : ++nCount;
178 : return;
179 : }
180 : #endif
181 :
182 0 : bOn = bOn && !nCount && rRect.HasArea() && pShell->GetWin();
183 0 : ++nCount;
184 0 : if( bOn )
185 : {
186 0 : pSh = pShell;
187 0 : pOut = NULL;
188 0 : OutputDevice *pO = pSh->GetOut();
189 : // We don't cheat on printers or virtual output devices...
190 0 : if( OUTDEV_WINDOW != pO->GetOutDevType() )
191 : return;
192 :
193 0 : pOut = pO;
194 0 : Size aPixSz( pOut->PixelToLogic( Size( 1,1 )) );
195 0 : SwRect aTmp( rRect );
196 0 : aTmp.SSize().Width() += aPixSz.Width()/2 + 1;
197 0 : aTmp.SSize().Height()+= aPixSz.Height()/2 + 1;
198 0 : Rectangle aTmpRect( pO->LogicToPixel( aTmp.SVRect() ) );
199 :
200 : OSL_ENSURE( !pSh->GetWin()->IsReallyVisible() ||
201 : aTmpRect.GetWidth() <= pSh->GetWin()->GetOutputSizePixel().Width() + 2,
202 : "Paintwidth bigger than visarea?" );
203 : // Does the rectangle fit in our buffer?
204 0 : if( !DoesFit( aTmpRect.GetSize() ) )
205 : {
206 0 : pOut = NULL;
207 : return;
208 : }
209 :
210 0 : aRect = SwRect( pO->PixelToLogic( aTmpRect ) );
211 :
212 0 : SetOutDev( pSh, pVirDev );
213 :
214 0 : if( pVirDev->GetFillColor() != pOut->GetFillColor() )
215 0 : pVirDev->SetFillColor( pOut->GetFillColor() );
216 :
217 0 : MapMode aMapMode( pOut->GetMapMode() );
218 : // OD 12.11.2002 #96272# - use method to set mapping
219 : //aMapMode.SetOrigin( Point(0,0) - aRect.Pos() );
220 0 : ::SetMappingForVirtDev( aRect.Pos(), &aMapMode, pOut, pVirDev );
221 :
222 0 : if( aMapMode != pVirDev->GetMapMode() )
223 0 : pVirDev->SetMapMode( aMapMode );
224 :
225 : /// OD 27.09.2002 #103636# - set value of parameter <rRect>
226 0 : rRect = aRect;
227 : }
228 : }
229 :
230 : /*************************************************************************
231 : * SwLayVout::Flush()
232 : *************************************************************************/
233 :
234 0 : void SwLayVout::_Flush()
235 : {
236 : OSL_ENSURE( pVirDev, "SwLayVout::DrawOut: nothing left Toulouse" );
237 0 : pOut->DrawOutDev( aRect.Pos(), aRect.SSize(),
238 0 : aRect.Pos(), aRect.SSize(), *pVirDev );
239 0 : SetOutDev( pSh, pOut );
240 0 : pOut = NULL;
241 0 : }
242 :
243 :
244 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|