Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "ColumnLineChartTypeTemplate.hxx"
21 : #include "macros.hxx"
22 : #include "CommonConverters.hxx"
23 : #include "DiagramHelper.hxx"
24 : #include "DataSeriesHelper.hxx"
25 : #include "servicenames_charttypes.hxx"
26 : #include "ColumnLineDataInterpreter.hxx"
27 : #include "ContainerHelper.hxx"
28 : #include "PropertyHelper.hxx"
29 : #include <com/sun/star/beans/PropertyAttribute.hpp>
30 : #include <com/sun/star/chart2/XChartTypeContainer.hpp>
31 : #include <com/sun/star/chart2/XDataSeriesContainer.hpp>
32 : #include <com/sun/star/drawing/LineStyle.hpp>
33 :
34 : #include <algorithm>
35 :
36 : using namespace ::com::sun::star::chart2;
37 : using namespace ::com::sun::star;
38 :
39 : using ::com::sun::star::uno::Reference;
40 : using ::com::sun::star::uno::Sequence;
41 : using ::rtl::OUString;
42 : using ::com::sun::star::beans::Property;
43 : using ::com::sun::star::uno::Reference;
44 : using ::com::sun::star::uno::Any;
45 : using ::osl::MutexGuard;
46 :
47 : namespace
48 : {
49 :
50 1 : static const ::rtl::OUString lcl_aServiceName(
51 : RTL_CONSTASCII_USTRINGPARAM( "com.sun.star.chart2.ColumnLineChartTypeTemplate" ));
52 :
53 : enum
54 : {
55 : PROP_COL_LINE_NUMBER_OF_LINES
56 : };
57 :
58 0 : void lcl_AddPropertiesToVector(
59 : ::std::vector< Property > & rOutProperties )
60 : {
61 : rOutProperties.push_back(
62 : Property( C2U( "NumberOfLines" ),
63 : PROP_COL_LINE_NUMBER_OF_LINES,
64 0 : ::getCppuType( reinterpret_cast< const sal_Int32 * >(0)),
65 : beans::PropertyAttribute::BOUND
66 0 : | beans::PropertyAttribute::MAYBEDEFAULT ));
67 0 : }
68 :
69 : struct StaticColumnLineChartTypeTemplateDefaults_Initializer
70 : {
71 0 : ::chart::tPropertyValueMap* operator()()
72 : {
73 0 : static ::chart::tPropertyValueMap aStaticDefaults;
74 0 : lcl_AddDefaultsToMap( aStaticDefaults );
75 0 : return &aStaticDefaults;
76 : }
77 : private:
78 0 : void lcl_AddDefaultsToMap( ::chart::tPropertyValueMap & rOutMap )
79 : {
80 0 : ::chart::PropertyHelper::setPropertyValueDefault< sal_Int32 >( rOutMap, PROP_COL_LINE_NUMBER_OF_LINES, 1 );
81 0 : }
82 : };
83 :
84 : struct StaticColumnLineChartTypeTemplateDefaults : public rtl::StaticAggregate< ::chart::tPropertyValueMap, StaticColumnLineChartTypeTemplateDefaults_Initializer >
85 : {
86 : };
87 :
88 : struct StaticColumnLineChartTypeTemplateInfoHelper_Initializer
89 : {
90 0 : ::cppu::OPropertyArrayHelper* operator()()
91 : {
92 0 : static ::cppu::OPropertyArrayHelper aPropHelper( lcl_GetPropertySequence() );
93 0 : return &aPropHelper;
94 : }
95 :
96 : private:
97 0 : uno::Sequence< Property > lcl_GetPropertySequence()
98 : {
99 0 : ::std::vector< ::com::sun::star::beans::Property > aProperties;
100 0 : lcl_AddPropertiesToVector( aProperties );
101 :
102 : ::std::sort( aProperties.begin(), aProperties.end(),
103 0 : ::chart::PropertyNameLess() );
104 :
105 0 : return ::chart::ContainerHelper::ContainerToSequence( aProperties );
106 : }
107 :
108 : };
109 :
110 : struct StaticColumnLineChartTypeTemplateInfoHelper : public rtl::StaticAggregate< ::cppu::OPropertyArrayHelper, StaticColumnLineChartTypeTemplateInfoHelper_Initializer >
111 : {
112 : };
113 :
114 : struct StaticColumnLineChartTypeTemplateInfo_Initializer
115 : {
116 0 : uno::Reference< beans::XPropertySetInfo >* operator()()
117 : {
118 : static uno::Reference< beans::XPropertySetInfo > xPropertySetInfo(
119 0 : ::cppu::OPropertySetHelper::createPropertySetInfo(*StaticColumnLineChartTypeTemplateInfoHelper::get() ) );
120 0 : return &xPropertySetInfo;
121 : }
122 : };
123 :
124 : struct StaticColumnLineChartTypeTemplateInfo : public rtl::StaticAggregate< uno::Reference< beans::XPropertySetInfo >, StaticColumnLineChartTypeTemplateInfo_Initializer >
125 : {
126 : };
127 :
128 : } // anonymous namespace
129 :
130 : namespace chart
131 : {
132 :
133 0 : ColumnLineChartTypeTemplate::ColumnLineChartTypeTemplate(
134 : Reference<
135 : uno::XComponentContext > const & xContext,
136 : const ::rtl::OUString & rServiceName,
137 : StackMode eStackMode,
138 : sal_Int32 nNumberOfLines ) :
139 : ChartTypeTemplate( xContext, rServiceName ),
140 : ::property::OPropertySet( m_aMutex ),
141 0 : m_eStackMode( eStackMode )
142 : {
143 0 : setFastPropertyValue_NoBroadcast( PROP_COL_LINE_NUMBER_OF_LINES, uno::makeAny( nNumberOfLines ));
144 0 : }
145 :
146 0 : ColumnLineChartTypeTemplate::~ColumnLineChartTypeTemplate()
147 0 : {}
148 :
149 : // ____ OPropertySet ____
150 0 : uno::Any ColumnLineChartTypeTemplate::GetDefaultValue( sal_Int32 nHandle ) const
151 : throw(beans::UnknownPropertyException)
152 : {
153 0 : const tPropertyValueMap& rStaticDefaults = *StaticColumnLineChartTypeTemplateDefaults::get();
154 0 : tPropertyValueMap::const_iterator aFound( rStaticDefaults.find( nHandle ) );
155 0 : if( aFound == rStaticDefaults.end() )
156 0 : return uno::Any();
157 0 : return (*aFound).second;
158 : }
159 :
160 0 : ::cppu::IPropertyArrayHelper & SAL_CALL ColumnLineChartTypeTemplate::getInfoHelper()
161 : {
162 0 : return *StaticColumnLineChartTypeTemplateInfoHelper::get();
163 : }
164 :
165 : // ____ XPropertySet ____
166 0 : uno::Reference< beans::XPropertySetInfo > SAL_CALL ColumnLineChartTypeTemplate::getPropertySetInfo()
167 : throw (uno::RuntimeException)
168 : {
169 0 : return *StaticColumnLineChartTypeTemplateInfo::get();
170 : }
171 :
172 0 : void ColumnLineChartTypeTemplate::createChartTypes(
173 : const Sequence< Sequence< Reference< XDataSeries > > > & aSeriesSeq,
174 : const Sequence< Reference< XCoordinateSystem > > & rCoordSys,
175 : const Sequence< Reference< XChartType > >& aOldChartTypesSeq )
176 : {
177 0 : if( rCoordSys.getLength() == 0 ||
178 0 : ! rCoordSys[0].is() )
179 0 : return;
180 :
181 : try
182 : {
183 : Reference< lang::XMultiServiceFactory > xFact(
184 0 : GetComponentContext()->getServiceManager(), uno::UNO_QUERY_THROW );
185 0 : Sequence< Reference< XDataSeries > > aFlatSeriesSeq( FlattenSequence( aSeriesSeq ));
186 0 : sal_Int32 nNumberOfSeries = aFlatSeriesSeq.getLength();
187 0 : sal_Int32 nNumberOfLines = 0;
188 0 : sal_Int32 nNumberOfColumns = 0;
189 :
190 0 : getFastPropertyValue( PROP_COL_LINE_NUMBER_OF_LINES ) >>= nNumberOfLines;
191 : OSL_ENSURE( nNumberOfLines>=0, "number of lines should be not negative" );
192 0 : if( nNumberOfLines < 0 )
193 0 : nNumberOfLines = 0;
194 :
195 0 : if( nNumberOfLines >= nNumberOfSeries )
196 : {
197 0 : if( nNumberOfSeries > 0 )
198 : {
199 0 : nNumberOfLines = nNumberOfSeries - 1;
200 0 : nNumberOfColumns = 1;
201 : }
202 : else
203 0 : nNumberOfLines = 0;
204 : }
205 : else
206 0 : nNumberOfColumns = nNumberOfSeries - nNumberOfLines;
207 :
208 : // Columns
209 : // -------
210 : Reference< XChartType > xCT(
211 0 : xFact->createInstance( CHART2_SERVICE_NAME_CHARTTYPE_COLUMN ), uno::UNO_QUERY_THROW );
212 :
213 0 : ChartTypeTemplate::copyPropertiesFromOldToNewCoordianteSystem( aOldChartTypesSeq, xCT );
214 :
215 0 : Reference< XChartTypeContainer > xCTCnt( rCoordSys[ 0 ], uno::UNO_QUERY_THROW );
216 0 : xCTCnt->setChartTypes( Sequence< Reference< chart2::XChartType > >( &xCT, 1 ));
217 :
218 0 : if( nNumberOfColumns > 0 )
219 : {
220 0 : Reference< XDataSeriesContainer > xDSCnt( xCT, uno::UNO_QUERY_THROW );
221 0 : Sequence< Reference< XDataSeries > > aColumnSeq( nNumberOfColumns );
222 : ::std::copy( aFlatSeriesSeq.getConstArray(),
223 0 : aFlatSeriesSeq.getConstArray() + nNumberOfColumns,
224 0 : aColumnSeq.getArray());
225 0 : xDSCnt->setDataSeries( aColumnSeq );
226 : }
227 :
228 : // Lines
229 : // -----
230 0 : xCT.set( xFact->createInstance( CHART2_SERVICE_NAME_CHARTTYPE_LINE ), uno::UNO_QUERY_THROW );
231 0 : xCTCnt.set( rCoordSys[ 0 ], uno::UNO_QUERY_THROW );
232 0 : xCTCnt->addChartType( xCT );
233 :
234 0 : if( nNumberOfLines > 0 )
235 : {
236 0 : Reference< XDataSeriesContainer > xDSCnt( xCT, uno::UNO_QUERY_THROW );
237 0 : Sequence< Reference< XDataSeries > > aLineSeq( nNumberOfLines );
238 0 : ::std::copy( aFlatSeriesSeq.getConstArray() + nNumberOfColumns,
239 0 : aFlatSeriesSeq.getConstArray() + aFlatSeriesSeq.getLength(),
240 0 : aLineSeq.getArray());
241 0 : xDSCnt->setDataSeries( aLineSeq );
242 0 : }
243 : }
244 0 : catch( const uno::Exception & ex )
245 : {
246 : ASSERT_EXCEPTION( ex );
247 : }
248 : }
249 :
250 0 : void SAL_CALL ColumnLineChartTypeTemplate::applyStyle(
251 : const Reference< chart2::XDataSeries >& xSeries,
252 : ::sal_Int32 nChartTypeIndex,
253 : ::sal_Int32 nSeriesIndex,
254 : ::sal_Int32 nSeriesCount )
255 : throw (uno::RuntimeException)
256 : {
257 0 : ChartTypeTemplate::applyStyle( xSeries, nChartTypeIndex, nSeriesIndex, nSeriesCount );
258 :
259 0 : if( nChartTypeIndex==0 ) // columns
260 : {
261 0 : DataSeriesHelper::setPropertyAlsoToAllAttributedDataPoints( xSeries, C2U( "BorderStyle" ), uno::makeAny( drawing::LineStyle_NONE ) );
262 : }
263 0 : else if( nChartTypeIndex==1 ) // lines
264 : {
265 0 : Reference< beans::XPropertySet > xProp( xSeries, uno::UNO_QUERY );
266 0 : if( xProp.is() )
267 : {
268 0 : DataSeriesHelper::switchLinesOnOrOff( xProp, true );
269 0 : DataSeriesHelper::switchSymbolsOnOrOff( xProp, false, nSeriesIndex );
270 0 : DataSeriesHelper::makeLinesThickOrThin( xProp, true );
271 0 : }
272 : }
273 0 : }
274 :
275 0 : StackMode ColumnLineChartTypeTemplate::getStackMode( sal_Int32 nChartTypeIndex ) const
276 : {
277 0 : if( nChartTypeIndex == 0 )
278 0 : return m_eStackMode;
279 0 : return StackMode_NONE;
280 : }
281 :
282 : // ____ XChartTypeTemplate ____
283 0 : sal_Bool SAL_CALL ColumnLineChartTypeTemplate::matchesTemplate(
284 : const uno::Reference< XDiagram >& xDiagram,
285 : sal_Bool bAdaptProperties )
286 : throw (uno::RuntimeException)
287 : {
288 0 : sal_Bool bResult = sal_False;
289 :
290 0 : if( ! xDiagram.is())
291 0 : return bResult;
292 :
293 : try
294 : {
295 0 : Reference< chart2::XChartType > xColumnChartType;
296 0 : Reference< XCoordinateSystem > xColumnChartCooSys;
297 0 : Reference< chart2::XChartType > xLineChartType;
298 0 : sal_Int32 nNumberOfChartTypes = 0;
299 :
300 : Reference< XCoordinateSystemContainer > xCooSysCnt(
301 0 : xDiagram, uno::UNO_QUERY_THROW );
302 : Sequence< Reference< XCoordinateSystem > > aCooSysSeq(
303 0 : xCooSysCnt->getCoordinateSystems());
304 0 : for( sal_Int32 i=0; i<aCooSysSeq.getLength(); ++i )
305 : {
306 0 : Reference< XChartTypeContainer > xCTCnt( aCooSysSeq[i], uno::UNO_QUERY_THROW );
307 0 : Sequence< Reference< XChartType > > aChartTypeSeq( xCTCnt->getChartTypes());
308 0 : for( sal_Int32 j=0; j<aChartTypeSeq.getLength(); ++j )
309 : {
310 0 : if( aChartTypeSeq[j].is())
311 : {
312 0 : ++nNumberOfChartTypes;
313 0 : if( nNumberOfChartTypes > 2 )
314 : break;
315 0 : OUString aCTService = aChartTypeSeq[j]->getChartType();
316 0 : if( aCTService.equals( CHART2_SERVICE_NAME_CHARTTYPE_COLUMN ))
317 : {
318 0 : xColumnChartType.set( aChartTypeSeq[j] );
319 0 : xColumnChartCooSys.set( aCooSysSeq[i] );
320 : }
321 0 : else if( aCTService.equals( CHART2_SERVICE_NAME_CHARTTYPE_LINE ))
322 0 : xLineChartType.set( aChartTypeSeq[j] );
323 : }
324 : }
325 0 : if( nNumberOfChartTypes > 2 )
326 : break;
327 0 : }
328 :
329 0 : if( nNumberOfChartTypes == 2 &&
330 0 : xColumnChartType.is() &&
331 0 : xLineChartType.is())
332 : {
333 : OSL_ASSERT( xColumnChartCooSys.is());
334 :
335 : // check stackmode of bars
336 0 : bResult = (xColumnChartCooSys->getDimension() == getDimension());
337 0 : if( bResult )
338 : {
339 0 : bool bFound=false;
340 0 : bool bAmbiguous=false;
341 : bResult = ( DiagramHelper::getStackModeFromChartType(
342 : xColumnChartType, bFound, bAmbiguous,
343 0 : xColumnChartCooSys )
344 0 : == getStackMode( 0 ) );
345 :
346 0 : if( bResult && bAdaptProperties )
347 : {
348 0 : Reference< XDataSeriesContainer > xSeriesContainer( xLineChartType, uno::UNO_QUERY );
349 0 : if( xSeriesContainer.is() )
350 : {
351 0 : sal_Int32 nNumberOfLines = xSeriesContainer->getDataSeries().getLength();
352 0 : setFastPropertyValue_NoBroadcast( PROP_COL_LINE_NUMBER_OF_LINES, uno::makeAny( nNumberOfLines ));
353 0 : }
354 : }
355 : }
356 0 : }
357 : }
358 0 : catch( const uno::Exception & ex )
359 : {
360 : ASSERT_EXCEPTION( ex );
361 : }
362 :
363 0 : return bResult;
364 : }
365 :
366 0 : Reference< chart2::XChartType > ColumnLineChartTypeTemplate::getChartTypeForIndex( sal_Int32 nChartTypeIndex )
367 : {
368 0 : Reference< chart2::XChartType > xCT;
369 : Reference< lang::XMultiServiceFactory > xFact(
370 0 : GetComponentContext()->getServiceManager(), uno::UNO_QUERY );
371 0 : if(xFact.is())
372 : {
373 0 : if( nChartTypeIndex == 0 )
374 0 : xCT.set( xFact->createInstance( CHART2_SERVICE_NAME_CHARTTYPE_COLUMN ), uno::UNO_QUERY );
375 : else
376 0 : xCT.set( xFact->createInstance( CHART2_SERVICE_NAME_CHARTTYPE_LINE ), uno::UNO_QUERY );
377 : }
378 0 : return xCT;
379 : }
380 :
381 0 : Reference< XChartType > SAL_CALL ColumnLineChartTypeTemplate::getChartTypeForNewSeries(
382 : const uno::Sequence< Reference< chart2::XChartType > >& aFormerlyUsedChartTypes )
383 : throw (uno::RuntimeException)
384 : {
385 0 : Reference< chart2::XChartType > xResult;
386 :
387 : try
388 : {
389 : Reference< lang::XMultiServiceFactory > xFact(
390 0 : GetComponentContext()->getServiceManager(), uno::UNO_QUERY_THROW );
391 0 : xResult.set( xFact->createInstance(
392 0 : CHART2_SERVICE_NAME_CHARTTYPE_LINE ), uno::UNO_QUERY_THROW );
393 0 : ChartTypeTemplate::copyPropertiesFromOldToNewCoordianteSystem( aFormerlyUsedChartTypes, xResult );
394 : }
395 0 : catch( const uno::Exception & ex )
396 : {
397 : ASSERT_EXCEPTION( ex );
398 : }
399 :
400 0 : return xResult;
401 : }
402 :
403 0 : Reference< XDataInterpreter > SAL_CALL ColumnLineChartTypeTemplate::getDataInterpreter()
404 : throw (uno::RuntimeException)
405 : {
406 0 : if( ! m_xDataInterpreter.is())
407 : {
408 0 : sal_Int32 nNumberOfLines = 1;
409 0 : getFastPropertyValue( PROP_COL_LINE_NUMBER_OF_LINES ) >>= nNumberOfLines;
410 0 : m_xDataInterpreter.set( new ColumnLineDataInterpreter( nNumberOfLines, GetComponentContext() ) );
411 : }
412 : else
413 : {
414 : //todo...
415 : OSL_FAIL( "number of lines may not be valid anymore in the datainterpreter" );
416 :
417 : }
418 :
419 0 : return m_xDataInterpreter;
420 : }
421 :
422 : // ----------------------------------------
423 :
424 0 : uno::Sequence< ::rtl::OUString > ColumnLineChartTypeTemplate::getSupportedServiceNames_Static()
425 : {
426 0 : uno::Sequence< ::rtl::OUString > aServices( 2 );
427 0 : aServices[ 0 ] = lcl_aServiceName;
428 0 : aServices[ 1 ] = C2U( "com.sun.star.chart2.ChartTypeTemplate" );
429 0 : return aServices;
430 : }
431 :
432 : // implement XServiceInfo methods basing upon getSupportedServiceNames_Static
433 0 : APPHELPER_XSERVICEINFO_IMPL( ColumnLineChartTypeTemplate, lcl_aServiceName );
434 :
435 0 : IMPLEMENT_FORWARD_XINTERFACE2( ColumnLineChartTypeTemplate, ChartTypeTemplate, OPropertySet )
436 0 : IMPLEMENT_FORWARD_XTYPEPROVIDER2( ColumnLineChartTypeTemplate, ChartTypeTemplate, OPropertySet )
437 :
438 3 : } // namespace chart
439 :
440 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
