LCOV - code coverage report
Current view: top level - usr/local/src/libreoffice/include/registry - reflwrit.hxx (source / functions) Hit Total Coverage
Test: libreoffice_filtered.info Lines: 0 15 0.0 %
Date: 2013-07-09 Functions: 0 5 0.0 %
Legend: Lines: hit not hit

          Line data    Source code
       1             : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
       2             : /*
       3             :  * This file is part of the LibreOffice project.
       4             :  *
       5             :  * This Source Code Form is subject to the terms of the Mozilla Public
       6             :  * License, v. 2.0. If a copy of the MPL was not distributed with this
       7             :  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
       8             :  *
       9             :  * This file incorporates work covered by the following license notice:
      10             :  *
      11             :  *   Licensed to the Apache Software Foundation (ASF) under one or more
      12             :  *   contributor license agreements. See the NOTICE file distributed
      13             :  *   with this work for additional information regarding copyright
      14             :  *   ownership. The ASF licenses this file to you under the Apache
      15             :  *   License, Version 2.0 (the "License"); you may not use this file
      16             :  *   except in compliance with the License. You may obtain a copy of
      17             :  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
      18             :  */
      19             : 
      20             : #ifndef _REGISTRY_REFLWRIT_HXX_
      21             : #define _REGISTRY_REFLWRIT_HXX_
      22             : 
      23             : #include <registry/regdllapi.h>
      24             : #include <registry/refltype.hxx>
      25             : #include <registry/regtype.h>
      26             : #include <rtl/ustring.hxx>
      27             : 
      28             : /// Implememetation handle
      29             : typedef void* TypeWriterImpl;
      30             : 
      31             : /****************************************************************************
      32             : 
      33             :     C-Api
      34             : 
      35             : *****************************************************************************/
      36             : 
      37             : #ifdef __cplusplus
      38             : extern "C" {
      39             : #endif
      40             : 
      41             : /** specifies a collection of function pointers which represents the complete registry type writer C-API.
      42             : 
      43             :     This funtions pointers are used by the C++ wrapper to call the C-API.
      44             : */
      45             : struct RegistryTypeWriter_Api
      46             : {
      47             :     TypeWriterImpl          (TYPEREG_CALLTYPE *createEntry)         (RTTypeClass, rtl_uString*, rtl_uString*, sal_uInt16, sal_uInt16, sal_uInt16);
      48             :     void                    (TYPEREG_CALLTYPE *acquire)             (TypeWriterImpl);
      49             :     void                    (TYPEREG_CALLTYPE *release)             (TypeWriterImpl);
      50             :     void                    (TYPEREG_CALLTYPE *setUik)              (TypeWriterImpl, const RTUik*);
      51             :     void                    (TYPEREG_CALLTYPE *setDoku)             (TypeWriterImpl, rtl_uString*);
      52             :     void                    (TYPEREG_CALLTYPE *setFileName)         (TypeWriterImpl, rtl_uString*);
      53             :     void                    (TYPEREG_CALLTYPE *setFieldData)        (TypeWriterImpl, sal_uInt16, rtl_uString*, rtl_uString*, rtl_uString*, rtl_uString*, RTFieldAccess, RTValueType, RTConstValueUnion);
      54             :     void                    (TYPEREG_CALLTYPE *setMethodData)       (TypeWriterImpl, sal_uInt16, rtl_uString*, rtl_uString*, RTMethodMode, sal_uInt16, sal_uInt16, rtl_uString*);
      55             :     void                    (TYPEREG_CALLTYPE *setParamData)        (TypeWriterImpl, sal_uInt16, sal_uInt16, rtl_uString*, rtl_uString*, RTParamMode);
      56             :     void                    (TYPEREG_CALLTYPE *setExcData)          (TypeWriterImpl, sal_uInt16, sal_uInt16, rtl_uString*);
      57             :     const sal_uInt8*        (TYPEREG_CALLTYPE *getBlop)             (TypeWriterImpl);
      58             :     sal_uInt32              (TYPEREG_CALLTYPE *getBlopSize)         (TypeWriterImpl);
      59             : 
      60             :     void                    (TYPEREG_CALLTYPE *setReferenceData)    (TypeWriterImpl, sal_uInt16, rtl_uString*, RTReferenceType, rtl_uString*, RTFieldAccess);
      61             : };
      62             : 
      63             : /** the API initialization function.
      64             : */
      65             : REG_DLLPUBLIC RegistryTypeWriter_Api* TYPEREG_CALLTYPE initRegistryTypeWriter_Api(void);
      66             : 
      67             : #ifdef __cplusplus
      68             : }
      69             : #endif
      70             : 
      71             : /** RegistryTypeWriter writes/creates a binary type blob.
      72             : 
      73             :     This class provides the necessary functions to write type information
      74             :     for all kinds of types into a blob.
      75             :     The class is inline and use a C-Api.
      76             : 
      77             :     @deprecated
      78             :     use typereg::Writer instead
      79             : */
      80             : class RegistryTypeWriter
      81             : {
      82             : public:
      83             : 
      84             :     /** Constructor.
      85             : 
      86             :         @param RTTypeClass specifies the type of the new blob.
      87             :         @param typeName specifies the full qualified type name with '/' as separator.
      88             :         @param superTypeName specifies the full qualified type name of the base type
      89             :                              with '/' as separator.
      90             :         @param fieldCount specifies the number of fields (eg. number of attrbutes/properties,
      91             :                           enum values or constants).
      92             :         @param methodCount specifies the number of methods.
      93             :         @param referenceCount specifies the number of references (eg. number of supported interfaces,
      94             :                               exported services ...)
      95             :      */
      96             :     inline RegistryTypeWriter(RTTypeClass               RTTypeClass,
      97             :                               const OUString&    typeName,
      98             :                               const OUString&    superTypeName,
      99             :                               sal_uInt16                fieldCount,
     100             :                               sal_uInt16                methodCount,
     101             :                               sal_uInt16                referenceCount);
     102             : 
     103             :     /// Copy constructcor
     104             :     inline RegistryTypeWriter(const RegistryTypeWriter& toCopy);
     105             : 
     106             :     /** Destructor. The Destructor frees the internal data block.
     107             : 
     108             :         The pointer (returned by getBlop) will be set to NULL.
     109             :      */
     110             :     inline ~RegistryTypeWriter();
     111             : 
     112             :     /// Assign operator
     113             :     inline RegistryTypeWriter& operator == (const RegistryTypeWriter& toAssign);
     114             : 
     115             :     /** @deprecated
     116             :         sets the unique identifier for an interface type.
     117             : 
     118             :         An earlier version of UNO used an unique identifier for interfaces. In the
     119             :         current version of UNO this uik was eliminated and this function is
     120             :         not longer used.
     121             :      */
     122             :     inline void setUik(const RTUik& uik);
     123             : 
     124             :     /** sets a documentation string for the type.
     125             : 
     126             :         This documentation should be the same as the documentation which is provided
     127             :         for this type in IDL.
     128             :      */
     129             :     inline void setDoku(const OUString& doku);
     130             : 
     131             :     /** sets the IDL filename where this type is defined.
     132             :      */
     133             :     inline void setFileName(const OUString& fileName);
     134             : 
     135             :     /** sets the data for a field member of a type blob.
     136             : 
     137             :         @param index indicates the index of the field.
     138             :         @param name specifies the name.
     139             :         @param typeName specifies the full qualified typename.
     140             :         @param doku specifies the documentation string of the field.
     141             :         @param fileName specifies the name of the IDL file where the field is defined.
     142             :         @param access specifies the access mode of the field.
     143             :         @param constValue specifies the value of the field. The value is only interesting
     144             :                           for enum values or constants.
     145             :      */
     146             :     inline void setFieldData( sal_uInt16                index,
     147             :                               const OUString&    name,
     148             :                               const OUString&    typeName,
     149             :                               const OUString&    doku,
     150             :                               const OUString&    fileName,
     151             :                               RTFieldAccess             access,
     152             :                               RTConstValue              constValue = RTConstValue());
     153             : 
     154             :     /** sets the data for a method.
     155             : 
     156             :         @param index indicates the index of the method.
     157             :         @param name specifies the name.
     158             :         @param returnTypeName specifies the full qualified return typename.
     159             :         @param mode specifies the method mode.
     160             :         @param paramCount specifies the number of parameters.
     161             :         @param excCount specifies the number of exceptions.
     162             :         @param doku specifies the documentation string of the field.
     163             :      */
     164             :     inline void setMethodData(sal_uInt16                index,
     165             :                               const OUString&    name,
     166             :                               const OUString&    returnTypeName,
     167             :                               RTMethodMode              mode,
     168             :                               sal_uInt16                paramCount,
     169             :                               sal_uInt16                excCount,
     170             :                               const OUString&    doku);
     171             : 
     172             :     /** sets the data for the specified parameter of a method.
     173             : 
     174             :         @param index indicates the index of the method.
     175             :         @param paramIndex specifies the index of the parameter.
     176             :         @param type specifies the full qualified typename.
     177             :         @param name specifies the name.
     178             :         @param mode specifies the parameter mode.
     179             :      */
     180             :     inline void setParamData(sal_uInt16             index,
     181             :                              sal_uInt16             paramIndex,
     182             :                              const OUString& type,
     183             :                              const OUString& name,
     184             :                              RTParamMode            mode);
     185             : 
     186             :     /** sets the data for the specified exception of a mehtod.
     187             : 
     188             :         @param index indicates the index of the method.
     189             :         @param excIndex specifies the index of the exception.
     190             :         @param type specifies the full qualified typename of the exception.
     191             :      */
     192             :     inline void setExcData(sal_uInt16               index,
     193             :                            sal_uInt16               excIndex,
     194             :                            const OUString&   type);
     195             : 
     196             :     /** returns a pointer to the new type blob.
     197             : 
     198             :         The pointer will be invalid (NULL) if the instance of
     199             :         the RegistryTypeWriter will be destroyed.
     200             :      */
     201             :     inline const sal_uInt8*     getBlop();
     202             : 
     203             :     /** returns the size of the new type blob in bytes.
     204             :      */
     205             :     inline sal_uInt32       getBlopSize();
     206             : 
     207             :     /** sets the data for a reference member.
     208             : 
     209             :         @param index indicates the index of the reference.
     210             :         @param name specifies the name.
     211             :         @param refType specifies the full qualified typename of the reference.
     212             :         @param doku specifies the documentation string of the reference.
     213             :         @param access specifies the access mode of the reference.
     214             :      */
     215             :     inline void setReferenceData( sal_uInt16                index,
     216             :                                     const OUString&  name,
     217             :                                     RTReferenceType             refType,
     218             :                                     const OUString&  doku,
     219             :                                     RTFieldAccess               access = RT_ACCESS_INVALID);
     220             : 
     221             : protected:
     222             : 
     223             :     /// stores the registry type writer Api.
     224             :     const RegistryTypeWriter_Api*                                m_pApi;
     225             :     /// stores the handle of an implementation class
     226             :     TypeWriterImpl                                               m_hImpl;
     227             : };
     228             : 
     229             : 
     230             : 
     231           0 : inline RegistryTypeWriter::RegistryTypeWriter(RTTypeClass               RTTypeClass,
     232             :                                               const OUString&    typeName,
     233             :                                               const OUString&    superTypeName,
     234             :                                               sal_uInt16                fieldCount,
     235             :                                               sal_uInt16                methodCount,
     236             :                                               sal_uInt16                referenceCount)
     237           0 :     : m_pApi(initRegistryTypeWriter_Api())
     238           0 :     , m_hImpl(NULL)
     239             : {
     240             :     m_hImpl = m_pApi->createEntry(RTTypeClass,
     241             :                                   typeName.pData,
     242             :                                   superTypeName.pData,
     243             :                                   fieldCount,
     244             :                                   methodCount,
     245           0 :                                   referenceCount);
     246           0 : }
     247             : 
     248             : 
     249             : inline RegistryTypeWriter::RegistryTypeWriter(const RegistryTypeWriter& toCopy)
     250             :     : m_pApi(toCopy.m_pApi)
     251             :     , m_hImpl(toCopy.m_hImpl)
     252             : {
     253             :     m_pApi->acquire(m_hImpl);
     254             : }
     255             : 
     256           0 : inline RegistryTypeWriter::~RegistryTypeWriter()
     257             : {
     258           0 :     m_pApi->release(m_hImpl);
     259           0 : }
     260             : 
     261             : inline RegistryTypeWriter& RegistryTypeWriter::operator == (const RegistryTypeWriter& toAssign)
     262             : {
     263             :     if (m_hImpl != toAssign.m_hImpl)
     264             :     {
     265             :         m_pApi->release(m_hImpl);
     266             :         m_hImpl = toAssign.m_hImpl;
     267             :         m_pApi->acquire(m_hImpl);
     268             :     }
     269             : 
     270             :     return *this;
     271             : }
     272             : 
     273           0 : inline void RegistryTypeWriter::setFieldData( sal_uInt16                index,
     274             :                                               const OUString&    name,
     275             :                                               const OUString&    typeName,
     276             :                                               const OUString&    doku,
     277             :                                               const OUString&    fileName,
     278             :                                               RTFieldAccess             access,
     279             :                                               RTConstValue              constValue)
     280             : {
     281           0 :     m_pApi->setFieldData(m_hImpl, index, name.pData, typeName.pData, doku.pData, fileName.pData, access, constValue.m_type, constValue.m_value);
     282           0 : }
     283             : 
     284             : 
     285             : inline void RegistryTypeWriter::setMethodData(sal_uInt16                index,
     286             :                                               const OUString&    name,
     287             :                                               const OUString&    returnTypeName,
     288             :                                               RTMethodMode              mode,
     289             :                                               sal_uInt16                paramCount,
     290             :                                               sal_uInt16                excCount,
     291             :                                               const OUString&    doku)
     292             : {
     293             :     m_pApi->setMethodData(m_hImpl, index, name.pData, returnTypeName.pData, mode, paramCount, excCount, doku.pData);
     294             : }
     295             : 
     296             : 
     297             : inline void RegistryTypeWriter::setUik(const RTUik& uik)
     298             : {
     299             :     m_pApi->setUik(m_hImpl, &uik);
     300             : }
     301             : 
     302             : inline void RegistryTypeWriter::setDoku(const OUString& doku)
     303             : {
     304             :     m_pApi->setDoku(m_hImpl, doku.pData);
     305             : }
     306             : 
     307             : inline void RegistryTypeWriter::setFileName(const OUString& doku)
     308             : {
     309             :     m_pApi->setFileName(m_hImpl, doku.pData);
     310             : }
     311             : 
     312             : inline void RegistryTypeWriter::setParamData(sal_uInt16             index,
     313             :                                              sal_uInt16             paramIndex,
     314             :                                              const OUString& type,
     315             :                                              const OUString& name,
     316             :                                              RTParamMode            mode)
     317             : {
     318             :     m_pApi->setParamData(m_hImpl, index, paramIndex, type.pData, name.pData, mode);
     319             : }
     320             : 
     321             : inline void RegistryTypeWriter::setExcData(sal_uInt16               index,
     322             :                                            sal_uInt16               excIndex,
     323             :                                            const OUString&   type)
     324             : {
     325             :     m_pApi->setExcData(m_hImpl, index, excIndex, type.pData);
     326             : }
     327             : 
     328           0 : inline const sal_uInt8* RegistryTypeWriter::getBlop()
     329             : {
     330           0 :     return m_pApi->getBlop(m_hImpl);
     331             : }
     332             : 
     333           0 : inline sal_uInt32 RegistryTypeWriter::getBlopSize()
     334             : {
     335           0 :     return m_pApi->getBlopSize(m_hImpl);
     336             : }
     337             : 
     338             : 
     339             : inline void RegistryTypeWriter::setReferenceData( sal_uInt16                index,
     340             :                                                     const OUString&  name,
     341             :                                                     RTReferenceType             refType,
     342             :                                                     const OUString&  doku,
     343             :                                                     RTFieldAccess           access)
     344             : {
     345             :     m_pApi->setReferenceData(m_hImpl, index, name.pData, refType, doku.pData, access);
     346             : }
     347             : 
     348             : #endif
     349             : 
     350             : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Generated by: LCOV version 1.10