Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #ifndef _VCL_PDFEXTOUTDEVDATA_HXX
21 : #define _VCL_PDFEXTOUTDEVDATA_HXX
22 :
23 : #include <vcl/dllapi.h>
24 :
25 : #include <vcl/pdfwriter.hxx>
26 : #include <vcl/extoutdevdata.hxx>
27 : #include <vcl/gdimtf.hxx>
28 : #include <vcl/mapmod.hxx>
29 : #include <tools/rtti.hxx>
30 : #include <vector>
31 : #include <deque>
32 :
33 : class Graphic;
34 :
35 : namespace vcl { class PDFWriter; }
36 :
37 : namespace vcl
38 : {
39 :
40 : /*
41 : A PDFExtOutDevBookmarkEntry is being created by the EditEngine if
42 : a bookmark URL has been parsed. The Application is requested to take
43 : care of each bookmark entry by emptying out the bookmark vector.
44 : */
45 0 : struct PDFExtOutDevBookmarkEntry
46 : {
47 : /** ID of the link pointing to the bookmark, or -1 if the entry denotes a destination instead of a link.
48 : */
49 : sal_Int32 nLinkId;
50 :
51 : /** ID of the named destination denoted by the bookmark, or -1 if the entry denotes a link instead of a named destination.
52 : */
53 : sal_Int32 nDestId;
54 :
55 : /** link target name, respectively destination name
56 : */
57 : OUString aBookmark;
58 :
59 0 : PDFExtOutDevBookmarkEntry()
60 : :nLinkId( -1 )
61 : ,nDestId( -1 )
62 0 : ,aBookmark()
63 : {
64 0 : }
65 : };
66 :
67 : /*
68 : Class that is being set at the OutputDevice allowing the
69 : application to send enhanced PDF commands like CreateLink
70 : */
71 : struct PageSyncData;
72 : struct GlobalSyncData;
73 : class VCL_DLLPUBLIC PDFExtOutDevData : public ExtOutDevData
74 : {
75 :
76 : const OutputDevice& mrOutDev;
77 :
78 : sal_Bool mbTaggedPDF;
79 : sal_Bool mbExportNotes;
80 : sal_Bool mbExportNotesPages;
81 : sal_Bool mbTransitionEffects;
82 : sal_Bool mbUseLosslessCompression;
83 : sal_Bool mbReduceImageResolution;
84 : sal_Bool mbExportFormFields;
85 : sal_Bool mbExportBookmarks;
86 : sal_Bool mbExportHiddenSlides;
87 : sal_Bool mbExportNDests; //i56629
88 : sal_Int32 mnFormsFormat;
89 : sal_Int32 mnPage;
90 : com::sun::star::lang::Locale maDocLocale;
91 :
92 : PageSyncData* mpPageSyncData;
93 : GlobalSyncData* mpGlobalSyncData;
94 :
95 : std::vector< PDFExtOutDevBookmarkEntry > maBookmarks;
96 :
97 : public :
98 :
99 : TYPEINFO();
100 : PDFExtOutDevData( const OutputDevice& rOutDev );
101 : virtual ~PDFExtOutDevData();
102 :
103 : sal_Bool PlaySyncPageAct( PDFWriter& rWriter, sal_uInt32& rCurGDIMtfAction );
104 : void ResetSyncData();
105 :
106 : void PlayGlobalActions( PDFWriter& rWriter );
107 :
108 :
109 :
110 : sal_Bool GetIsExportNotes() const;
111 : void SetIsExportNotes( const sal_Bool bExportNotes );
112 :
113 : sal_Bool GetIsExportNotesPages() const;
114 : void SetIsExportNotesPages( const sal_Bool bExportNotesPages );
115 :
116 : sal_Bool GetIsExportTaggedPDF() const;
117 : void SetIsExportTaggedPDF( const sal_Bool bTaggedPDF );
118 :
119 : sal_Bool GetIsExportTransitionEffects() const;
120 : void SetIsExportTransitionEffects( const sal_Bool bTransitionalEffects );
121 :
122 : sal_Bool GetIsExportFormFields() const;
123 : void SetIsExportFormFields( const sal_Bool bExportFormFields );
124 :
125 : void SetFormsFormat( const sal_Int32 nFormsFormat );
126 :
127 : sal_Bool GetIsExportBookmarks() const;
128 : void SetIsExportBookmarks( const sal_Bool bExportBookmarks );
129 :
130 : sal_Bool GetIsExportHiddenSlides() const;
131 : void SetIsExportHiddenSlides( const sal_Bool bExportHiddenSlides );
132 :
133 : sal_Bool GetIsExportNamedDestinations() const; //i56629
134 : void SetIsExportNamedDestinations( const sal_Bool bExportNDests ); //i56629
135 :
136 : // PageNumber, Compression is being set by the PDFExport
137 : sal_Int32 GetCurrentPageNumber() const;
138 : void SetCurrentPageNumber( const sal_Int32 nPage );
139 :
140 : sal_Bool GetIsLosslessCompression() const;
141 : void SetIsLosslessCompression( const sal_Bool bLosslessCompression );
142 :
143 : sal_Bool GetIsReduceImageResolution() const;
144 : void SetIsReduceImageResolution( const sal_Bool bReduceImageResolution );
145 :
146 : const com::sun::star::lang::Locale& GetDocumentLocale() const;
147 : void SetDocumentLocale( const com::sun::star::lang::Locale& rLoc );
148 :
149 : std::vector< PDFExtOutDevBookmarkEntry >& GetBookmarks();
150 :
151 : /** Start a new group of render output
152 :
153 : Use this method to group render output.
154 : */
155 : void BeginGroup();
156 :
157 : /** End render output
158 :
159 : This method ends grouped render output, that can be
160 : represented by a GfxLink. This is typically used for
161 : external graphic files, such as JPEGs, EPS files etc.
162 : The BeginGroup/EndGroup calls must exactly enclose the
163 : relevant OutputDevice calls issued to render the
164 : graphic the normal way.
165 :
166 : @param rGraphic
167 : The link to the original graphic
168 :
169 : @param nTransparency
170 : Eight bit transparency value, with 0 denoting full opacity,
171 : and 255 full transparency.
172 :
173 : @param rOutputRect
174 : The output rectangle of the graphic.
175 :
176 : @param rVisibleOutputRect
177 : The visible part of the output. This might be less than
178 : rOutputRect, e.g. for cropped graphics.
179 : */
180 : void EndGroup( const Graphic& rGraphic,
181 : sal_uInt8 nTransparency,
182 : const Rectangle& rOutputRect,
183 : const Rectangle& rVisibleOutputRect );
184 : //--->i56629
185 : /** Create a new named destination to be used in a link to this document from another PDF document
186 : (see PDF spec 1.4, 8.2.1)
187 :
188 : @parm sDestName
189 : the name this destination will be addressed with from others PDF document
190 :
191 : @param rRect
192 : target rectangle on page to be displayed if dest is jumped to
193 :
194 : @param nPageNr
195 : number of page the dest is on (as returned by NewPage)
196 : or -1 in which case the current page is used
197 :
198 : @param eType
199 : what dest type to use
200 :
201 : @returns
202 : the destination id (to be used in SetLinkDest) or
203 : -1 if page id does not exist
204 : */
205 : sal_Int32 CreateNamedDest( const String& sDestName, const Rectangle& rRect, sal_Int32 nPageNr = -1, PDFWriter::DestAreaType eType = PDFWriter::XYZ );
206 :
207 : /** registers a destination for which a destinatin ID needs to be known immediately, instead of later on setting it via
208 : SetLinkDest.
209 :
210 : This is used in contexts where a destination is referenced by means other than a link.
211 :
212 : Later in the export process, a call to DescribeRegisteredDest must be made, providing the information about
213 : the destination.
214 :
215 : @return
216 : the unique Id of the destination
217 : */
218 : sal_Int32 RegisterDest();
219 :
220 : /** provides detailed information about a destination range which previously has been registered using RegisterDest.
221 : */
222 : void DescribeRegisteredDest( sal_Int32 nDestId, const Rectangle& rRect, sal_Int32 nPageNr = -1, PDFWriter::DestAreaType eType = PDFWriter::XYZ );
223 :
224 : //<---i56629
225 :
226 : /** Create a new destination to be used in a link
227 :
228 : @param rRect
229 : target rectangle on page to be displayed if dest is jumped to
230 :
231 : @param nPageNr
232 : number of page the dest is on (as returned by NewPage)
233 : or -1 in which case the current page is used
234 :
235 : @param eType
236 : what dest type to use
237 :
238 : @returns
239 : the destination id (to be used in SetLinkDest) or
240 : -1 if page id does not exist
241 : */
242 : sal_Int32 CreateDest( const Rectangle& rRect, sal_Int32 nPageNr = -1, PDFWriter::DestAreaType eType = PDFWriter::XYZ );
243 : /** Create a new link on a page
244 :
245 : @param rRect
246 : active rectangle of the link (that is the area that has to be
247 : hit to activate the link)
248 :
249 : @param nPageNr
250 : number of page the link is on (as returned by NewPage)
251 : or -1 in which case the current page is used
252 :
253 : @returns
254 : the link id (to be used in SetLinkDest, SetLinkURL) or
255 : -1 if page id does not exist
256 : */
257 : sal_Int32 CreateLink( const Rectangle& rRect, sal_Int32 nPageNr = -1 );
258 : /** Set the destination for a link
259 : <p>will change a URL type link to a dest link if necessary</p>
260 :
261 : @param nLinkId
262 : the link to be changed
263 :
264 : @param nDestId
265 : the dest the link shall point to
266 : @returns
267 : 0 for success
268 : -1 in case the link id does not exist
269 : -2 in case the dest id does not exist
270 : */
271 : sal_Int32 SetLinkDest( sal_Int32 nLinkId, sal_Int32 nDestId );
272 : /** Set the URL for a link
273 : <p>will change a dest type link to an URL type link if necessary</p>
274 : @param nLinkId
275 : the link to be changed
276 :
277 : @param rURL
278 : the URL the link shall point to.
279 : there will be no error checking or any kind of
280 : conversion done to this parameter execept this:
281 : it will be output as 7bit Ascii. The URL
282 : will appear literally in the PDF file produced
283 :
284 : @returns
285 : 0 for success
286 : -1 in case the link id does not exist
287 : */
288 : sal_Int32 SetLinkURL( sal_Int32 nLinkId, const OUString& rURL );
289 : /** Create a new outline item
290 :
291 : @param nParent
292 : declares the parent of the new item in the outline hierarchy.
293 : An invalid value will result in a new toplevel item.
294 :
295 : @param rText
296 : sets the title text of the item
297 :
298 : @param nDestId
299 : declares which Dest (created with CreateDest) the outline item
300 : will point to
301 :
302 : @returns
303 : the outline item id of the new item
304 : */
305 : sal_Int32 CreateOutlineItem( sal_Int32 nParent = 0, const OUString& rText = OUString(), sal_Int32 nDestID = -1 );
306 :
307 : /** Create a new note on a page
308 :
309 : @param rRect
310 : active rectangle of the note (that is the area that has to be
311 : hit to popup the annotation)
312 :
313 : @param rNote
314 : specifies the contents of the note
315 :
316 : @param nPageNr
317 : number of page the note is on (as returned by NewPage)
318 : or -1 in which case the current page is used
319 : */
320 : void CreateNote( const Rectangle& rRect, const PDFNote& rNote, sal_Int32 nPageNr = -1 );
321 :
322 : /** begin a new logical structure element
323 :
324 : BeginStructureElement/EndStructureElement calls build the logical structure
325 : of the PDF - the basis for tagged PDF. Structural elements are implemented
326 : using marked content tags. Each structural element can contain sub elements
327 : (e.g. a section can contain a heading and a paragraph). The structure hierarchy
328 : is build automatically from the Begin/EndStructureElement calls.
329 :
330 : A structural element need not be contained on one page; e.g. paragraphs often
331 : run from one page to the next. In this case the corresponding EndStructureElement
332 : must be called while drawing the next page.
333 :
334 : BeginStructureElement and EndStructureElement must be called only after
335 : <member scope="vcl">PDFWriter::NewPage</member> has been called and before
336 : <member scope="vcl">PDFWriter::Emit</member>gets called. The current page
337 : number is an implicit context parameter for Begin/EndStructureElement.
338 :
339 : For pagination artifacts that are not part of the logical structure
340 : of the document (like header, footer or page number) the special
341 : StructElement <code>NonStructElement</code> exists. To place content
342 : outside of the struture tree simply call
343 : <code>BeginStructureElement( NonStructElement )</code> then draw your
344 : content and then call <code>EndStructureElement()</code>. Any children
345 : of a <code>NonStructElement</code> will not be part of the structure as well.
346 :
347 : @param eType
348 : denotes what kind of element to begin (e.g. a heading or paragraph)
349 :
350 : @param rAlias
351 : the specified alias will be used as structure tag. Also an entry in the PDF's
352 : role map will be created mapping alias to regular structure type.
353 :
354 : @returns
355 : the id of the newly created structural element
356 : */
357 : sal_Int32 BeginStructureElement( PDFWriter::StructElement eType, const OUString& rAlias = OUString() );
358 : /** end a logical structure element
359 :
360 : @see BeginStructureElement
361 : */
362 : void EndStructureElement();
363 : /** set the current structure element
364 :
365 : <p>
366 : For different purposes it may be useful to paint a structure element's
367 : content discontinously. In that case an already existing structure element
368 : can be appended to by using <code>SetCurrentStructureElement</code>. The
369 : refenrenced structure element becomes the current structure element with
370 : all consequences: all following structure elements are appended as children
371 : of the current element.
372 : </p>
373 :
374 : @param nElement
375 : the id of the new current structure element
376 :
377 : @returns
378 : <true/> if the current structure element could be set successfully
379 : <false/> if the current structure element could not be changed
380 : (e.g. if the passed element id is invalid)
381 : */
382 : bool SetCurrentStructureElement( sal_Int32 nElement );
383 : /** get the current structure element id
384 :
385 : @returns
386 : the id of the current structure element
387 : */
388 : sal_Int32 GetCurrentStructureElement();
389 :
390 : /** set a structure attribute on the current structural element
391 :
392 : SetStructureAttribute sets an attribute of the current structural element to a
393 : new value. A consistency check is performed before actually setting the value;
394 : if the check fails, the function returns <FALSE/> and the attribute remains
395 : unchanged.
396 :
397 : @param eAttr
398 : denotes what attribute to change
399 :
400 : @param eVal
401 : the value to set the attribute to
402 :
403 : @returns
404 : <TRUE/> if the value was valid and the change has been performed,
405 : <FALSE/> if the attribute or value was invalid; attribute remains unchanged
406 : */
407 : bool SetStructureAttribute( PDFWriter::StructAttribute eAttr, PDFWriter::StructAttributeValue eVal );
408 : /** set a structure attribute on the current structural element
409 :
410 : SetStructureAttributeNumerical sets an attribute of the current structural element
411 : to a new numerical value. A consistency check is performed before actually setting
412 : the value; if the check fails, the function returns <FALSE/> and the attribute
413 : remains unchanged.
414 :
415 : @param eAttr
416 : denotes what attribute to change
417 :
418 : @param nValue
419 : the value to set the attribute to
420 :
421 : @returns
422 : <TRUE/> if the value was valid and the change has been performed,
423 : <FALSE/> if the attribute or value was invalid; attribute remains unchanged
424 : */
425 : bool SetStructureAttributeNumerical( PDFWriter::StructAttribute eAttr, sal_Int32 nValue );
426 : /** set the bounding box of a structural element
427 :
428 : SetStructureBoundingBox sets the BBox attribute to a new value. Since the BBox
429 : attribute can only be applied to <code>Table</code>, <code>Figure</code>,
430 : <code>Form</code> and <code>Formula</code> elements, a call of this function
431 : for other element types will be ignored and the BBox attribute not be set.
432 :
433 : @param rRect
434 : the new bounding box for the structural element
435 : */
436 : void SetStructureBoundingBox( const Rectangle& rRect );
437 :
438 : /** set the ActualText attribute of a structural element
439 :
440 : ActualText contains the Unicode text without layout artifacts that is shown by
441 : a structural element. For example if a line is ended prematurely with a break in
442 : a word and continued on the next line (e.g. "happen-<newline>stance") the
443 : corresponding ActualText would contain the unbroken line (e.g. "happenstance").
444 :
445 : @param rText
446 : contains the complete logical text the structural element displays.
447 : */
448 : void SetActualText( const String& rText );
449 :
450 : /** set the Alt attribute of a strutural element
451 :
452 : Alt is s replacement text describing the contents of a structural element. This
453 : is mainly used by accessibility applications; e.g. a screen reader would read
454 : the Alt replacement text for an image to a visually impaired user.
455 :
456 : @param rText
457 : contains the replacement text for the structural element
458 : */
459 : void SetAlternateText( const String& rText );
460 :
461 : /** Sets the transitional effect to be applied when the current page gets shown.
462 :
463 : @param eType
464 : the kind of effect to be used; use Regular to disable transitional effects
465 : for this page
466 :
467 : @param nMilliSec
468 : the duration of the transitional effect in milliseconds;
469 : set 0 to disable transitional effects
470 :
471 : @param nPageNr
472 : the page number to apply the effect to; -1 denotes the current page
473 : */
474 : void SetPageTransition( PDFWriter::PageTransition eType, sal_uInt32 nMilliSec, sal_Int32 nPageNr = -1 );
475 :
476 : /** create a new form control
477 :
478 : This function creates a new form control in the PDF and sets its various
479 : properties. Do not pass an actual AnyWidget as <code>rControlType</code>
480 : will be cast to the type described by the type member.
481 :
482 : @param rControlType
483 : a descendant of <code>AnyWidget</code> determing the control's properties
484 : */
485 : void CreateControl( const PDFWriter::AnyWidget& rControlType, sal_Int32 nPageNr = -1 );
486 : };
487 :
488 : }
489 :
490 : #endif
491 :
492 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
