LCOV - code coverage report
Current view: top level - usr/local/src/libreoffice/sw/source/ui/dbui - mmoutputpage.cxx (source / functions) Hit Total Coverage
Test: libreoffice_filtered.info Lines: 0 661 0.0 %
Date: 2013-07-09 Functions: 0 54 0.0 %
Legend: Lines: hit not hit

          Line data    Source code
       1             : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
       2             : /*
       3             :  * This file is part of the LibreOffice project.
       4             :  *
       5             :  * This Source Code Form is subject to the terms of the Mozilla Public
       6             :  * License, v. 2.0. If a copy of the MPL was not distributed with this
       7             :  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
       8             :  *
       9             :  * This file incorporates work covered by the following license notice:
      10             :  *
      11             :  *   Licensed to the Apache Software Foundation (ASF) under one or more
      12             :  *   contributor license agreements. See the NOTICE file distributed
      13             :  *   with this work for additional information regarding copyright
      14             :  *   ownership. The ASF licenses this file to you under the Apache
      15             :  *   License, Version 2.0 (the "License"); you may not use this file
      16             :  *   except in compliance with the License. You may obtain a copy of
      17             :  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
      18             :  */
      19             : 
      20             : #include <mmoutputpage.hxx>
      21             : #include <mailmergewizard.hxx>
      22             : #include <mmconfigitem.hxx>
      23             : #include <mailmergechildwindow.hxx>
      24             : #include <mailconfigpage.hxx>
      25             : #include <cmdid.h>
      26             : #include <swtypes.hxx>
      27             : #include <view.hxx>
      28             : #include <wrtsh.hxx>
      29             : #include <docsh.hxx>
      30             : #include <IDocumentDeviceAccess.hxx>
      31             : #include <hintids.hxx>
      32             : #include <editeng/scripttypeitem.hxx>
      33             : #include <editeng/langitem.hxx>
      34             : #include <svl/itemset.hxx>
      35             : #include <svl/stritem.hxx>
      36             : #include <svtools/ehdl.hxx>
      37             : #include <svtools/sfxecode.hxx>
      38             : #include <vcl/msgbox.hxx>
      39             : #include <sfx2/dinfdlg.hxx>
      40             : #include <sfx2/printer.hxx>
      41             : #include <sfx2/fcontnr.hxx>
      42             : #include <sfx2/viewfrm.hxx>
      43             : #include <sfx2/dispatch.hxx>
      44             : #include <sfx2/docfile.hxx>
      45             : #include <tools/urlobj.hxx>
      46             : #include <svl/urihelper.hxx>
      47             : #include <vcl/print.hxx>
      48             : #include <unotools/tempfile.hxx>
      49             : #include <osl/file.hxx>
      50             : #include <mmgreetingspage.hxx>
      51             : #include <com/sun/star/frame/XStorable.hpp>
      52             : #include <com/sun/star/sdbcx/XColumnsSupplier.hpp>
      53             : #include <com/sun/star/sdb/XColumn.hpp>
      54             : #include <dbmgr.hxx>
      55             : #include <swunohelper.hxx>
      56             : #include <osl/mutex.hxx>
      57             : #include <shellio.hxx>
      58             : #include <svtools/htmlcfg.hxx>
      59             : #include <sfx2/event.hxx>
      60             : #include <swevent.hxx>
      61             : #include <mmoutputpage.hrc>
      62             : #include <dbui.hxx>
      63             : #include <dbui.hrc>
      64             : #include <helpid.h>
      65             : #include <sfx2/app.hxx>
      66             : #include <statstr.hrc>
      67             : #include <unomid.h>
      68             : #include <comphelper/string.hxx>
      69             : 
      70             : using namespace svt;
      71             : using namespace ::com::sun::star;
      72             : using namespace ::com::sun::star::uno;
      73             : 
      74           0 : static String lcl_GetExtensionForDocType(sal_uLong nDocType)
      75             : {
      76           0 :     OUString sExtension;
      77           0 :     switch( nDocType )
      78             :     {
      79           0 :         case MM_DOCTYPE_OOO : sExtension = OUString( "odt" ); break;
      80           0 :         case MM_DOCTYPE_PDF : sExtension = OUString( "pdf" ); break;
      81           0 :         case MM_DOCTYPE_WORD: sExtension = OUString( "doc" ); break;
      82           0 :         case MM_DOCTYPE_HTML: sExtension = OUString( "html" ); break;
      83           0 :         case MM_DOCTYPE_TEXT: sExtension = OUString( "txt" ); break;
      84             :     }
      85           0 :     return sExtension;
      86             : }
      87             : 
      88           0 : static OUString lcl_GetColumnValueOf(const OUString& rColumn, Reference < container::XNameAccess>& rxColAccess )
      89             : {
      90           0 :     OUString sRet;
      91             :     try
      92             :     {
      93           0 :         if (rxColAccess->hasByName(rColumn))
      94             :         {
      95           0 :             Any aCol = rxColAccess->getByName(rColumn);
      96           0 :             Reference< sdb::XColumn > xColumn;
      97           0 :             aCol >>= xColumn;
      98           0 :             if(xColumn.is())
      99           0 :                 sRet = xColumn->getString();
     100             :         }
     101             :     }
     102           0 :     catch (const uno::Exception&)
     103             :     {
     104             :     }
     105           0 :     return sRet;
     106             : }
     107             : 
     108             : class SwSaveWarningBox_Impl : public ModalDialog
     109             : {
     110             :     FixedImage      aWarningImageIM;
     111             :     FixedInfo       aWarningFI;
     112             : 
     113             :     FixedText       aFileNameFT;
     114             :     Edit            aFileNameED;
     115             : 
     116             :     FixedLine       aSeparatorFL;
     117             :     OKButton        aOKPB;
     118             :     CancelButton    aCancelPB;
     119             : 
     120             :     DECL_LINK( ModifyHdl, Edit*);
     121             : public:
     122             :     SwSaveWarningBox_Impl(Window* pParent, const String& rFileName);
     123             :     ~SwSaveWarningBox_Impl();
     124             : 
     125           0 :     String          GetFileName() const {return aFileNameED.GetText();}
     126             : };
     127             : 
     128             : class SwSendQueryBox_Impl : public ModalDialog
     129             : {
     130             :     FixedImage      aQueryImageIM;
     131             :     FixedInfo       aQueryFI;
     132             : 
     133             :     Edit            aTextED;
     134             : 
     135             :     FixedLine       aSeparatorFL;
     136             :     OKButton        aOKPB;
     137             :     CancelButton    aCancelPB;
     138             : 
     139             :     bool            bIsEmptyAllowed;
     140             :     DECL_LINK( ModifyHdl, Edit*);
     141             : public:
     142             :     SwSendQueryBox_Impl(Window* pParent, const String& rQueryText);
     143             :     ~SwSendQueryBox_Impl();
     144             : 
     145           0 :     void            SetValue(const String& rSet)
     146             :                         {
     147           0 :                             aTextED.SetText(rSet);
     148           0 :                             ModifyHdl( &aTextED );
     149           0 :                         }
     150           0 :     String          GetValue() const {return aTextED.GetText();}
     151             : 
     152           0 :     void            SetIsEmptyTextAllowed(bool bSet)
     153             :                         {
     154           0 :                             bIsEmptyAllowed = bSet;
     155           0 :                             ModifyHdl( &aTextED );
     156           0 :                         }
     157             : };
     158             : 
     159           0 : SwSaveWarningBox_Impl::SwSaveWarningBox_Impl(Window* pParent, const String& rFileName) :
     160             :     ModalDialog(pParent, SW_RES(   DLG_MM_SAVEWARNING )),
     161             :     aWarningImageIM(this,   SW_RES( IM_WARNING   )),
     162             :     aWarningFI(this,        SW_RES( FI_WARNING   )),
     163             :     aFileNameFT(this,       SW_RES( FT_FILENAME  )),
     164             :     aFileNameED(this,       SW_RES( ED_FILENAME  )),
     165             :     aSeparatorFL(this,      SW_RES( FL_SEPARATOR )),
     166             :     aOKPB(this,             SW_RES( PB_OK        )),
     167           0 :     aCancelPB(this,         SW_RES( PB_CANCEL    ))
     168             : {
     169           0 :     FreeResource();
     170           0 :     aWarningImageIM.SetImage(WarningBox::GetStandardImage());
     171           0 :     aFileNameED.SetText(rFileName);
     172           0 :     aFileNameED.SetModifyHdl(LINK(this, SwSaveWarningBox_Impl, ModifyHdl));
     173           0 :     ModifyHdl( &aFileNameED );
     174           0 : }
     175             : 
     176           0 : SwSaveWarningBox_Impl::~SwSaveWarningBox_Impl()
     177             : {
     178           0 : }
     179             : 
     180           0 : IMPL_LINK( SwSaveWarningBox_Impl, ModifyHdl, Edit*, pEdit)
     181             : {
     182           0 :     aOKPB.Enable(!pEdit->GetText().isEmpty());
     183           0 :     return 0;
     184             : }
     185             : 
     186           0 : SwSendQueryBox_Impl::SwSendQueryBox_Impl(Window* pParent, const String& rText) :
     187             :     ModalDialog(pParent, SW_RES(   DLG_MM_QUERY )),
     188             :     aQueryImageIM( this,    SW_RES( IM_QUERY     )),
     189             :     aQueryFI( this,         SW_RES( FI_QUERY     )),
     190             :     aTextED( this,          SW_RES( ED_TEXT      )),
     191             :     aSeparatorFL(this,      SW_RES( FL_SEPARATOR )),
     192             :     aOKPB(this,             SW_RES( PB_OK        )),
     193             :     aCancelPB(this,         SW_RES( PB_CANCEL    )),
     194           0 :     bIsEmptyAllowed(true)
     195             : {
     196           0 :     FreeResource();
     197           0 :     aQueryFI.SetText(rText);
     198           0 :     aQueryImageIM.SetImage(QueryBox::GetStandardImage());
     199           0 :     aTextED.SetModifyHdl(LINK(this, SwSendQueryBox_Impl, ModifyHdl));
     200           0 :     ModifyHdl( &aTextED );
     201           0 : }
     202             : 
     203           0 : SwSendQueryBox_Impl::~SwSendQueryBox_Impl()
     204             : {
     205           0 : }
     206             : 
     207           0 : IMPL_LINK( SwSendQueryBox_Impl, ModifyHdl, Edit*, pEdit)
     208             : {
     209           0 :     aOKPB.Enable(bIsEmptyAllowed  || !pEdit->GetText().isEmpty());
     210           0 :     return 0;
     211             : }
     212             : 
     213             : class SwCopyToDialog : public SfxModalDialog
     214             : {
     215             :     FixedInfo       m_aDescriptionFI;
     216             :     FixedText       m_aCCFT;
     217             :     Edit            m_aCCED;
     218             :     FixedText       m_aBCCFT;
     219             :     Edit            m_aBCCED;
     220             : 
     221             :     FixedInfo       m_aNoteFI;
     222             :     FixedLine       m_aSeparatorFL;
     223             : 
     224             :     OKButton        m_aOK;
     225             :     CancelButton    m_aCancel;
     226             :     HelpButton      m_aHelp;
     227             : 
     228             : public:
     229             :     SwCopyToDialog(Window* pParent);
     230             :     ~SwCopyToDialog();
     231             : 
     232           0 :     String          GetCC() {return m_aCCED.GetText();}
     233           0 :     void            SetCC(const String& rSet) {m_aCCED.SetText(rSet);}
     234             : 
     235           0 :     String          GetBCC() {return m_aBCCED.GetText();}
     236           0 :     void            SetBCC(const String& rSet) {m_aBCCED.SetText(rSet);}
     237             : };
     238             : 
     239           0 : SwCopyToDialog::SwCopyToDialog(Window* pParent) :
     240             :     SfxModalDialog(pParent, SW_RES(DLG_MM_COPYTO)),
     241             : #ifdef _MSC_VER
     242             : #pragma warning (disable : 4355)
     243             : #endif
     244             :     m_aDescriptionFI( this, SW_RES(       FI_DESCRIPTION )),
     245             :     m_aCCFT( this, SW_RES(                FT_CC          )),
     246             :     m_aCCED( this, SW_RES(                ED_CC          )),
     247             :     m_aBCCFT( this, SW_RES(               FT_BCC         )),
     248             :     m_aBCCED( this, SW_RES(               ED_BCC         )),
     249             :     m_aNoteFI( this, SW_RES(              FI_NOTE        )),
     250             :     m_aSeparatorFL( this, SW_RES(         FL_SEPARATOR   )),
     251             :     m_aOK( this, SW_RES(                  PB_OK          )),
     252             :     m_aCancel( this, SW_RES(              PB_CANCEL      )),
     253           0 :     m_aHelp( this, SW_RES(                PB_HELP        ))
     254             : #ifdef _MSC_VER
     255             : #pragma warning (default : 4355)
     256             : #endif
     257             : {
     258           0 :     FreeResource();
     259           0 : }
     260             : 
     261           0 : SwCopyToDialog::~SwCopyToDialog()
     262             : {
     263           0 : }
     264             : 
     265           0 : SwMailMergeOutputPage::SwMailMergeOutputPage( SwMailMergeWizard* _pParent) :
     266             :     svt::OWizardPage( _pParent, SW_RES(DLG_MM_OUTPUT_PAGE)),
     267             : #ifdef _MSC_VER
     268             : #pragma warning (disable : 4355)
     269             : #endif
     270             :     m_aHeaderFI(this,           SW_RES(  FI_HEADER           ) ),
     271             :     m_aOptionsFI(this,          SW_RES(  FI_OPTIONS          ) ),
     272             :     m_aSaveStartDocRB(this,     SW_RES(  RB_SAVESTARTDOC     ) ),
     273             :     m_aSaveMergedDocRB(this,    SW_RES(  RB_SAVEMERGEDDOC    ) ),
     274             :     m_aPrintRB(this,            SW_RES(  RB_PRINT            ) ),
     275             :     m_aSendMailRB(this,         SW_RES(  RB_SENDMAIL         ) ),
     276             : 
     277             :     m_aSeparatorFL(this,        SW_RES(  FL_SEPARATOR        ) ),
     278             : 
     279             :     m_aSaveStartDocPB(this,     SW_RES(  PB_SAVESTARTDOC     ) ),
     280             : 
     281             :     m_aSaveAsOneRB(this,        SW_RES(  RB_SAVEASONE        ) ),
     282             :     m_aSaveIndividualRB(this,   SW_RES(  RB_SAVEINDIVIDUAL   ) ),
     283             :     m_aPrintAllRB(this,         SW_RES(  RB_PRINTALL         ) ),
     284             :     m_aSendAllRB( this, SW_RES(       RB_SENDALL             ) ),
     285             : 
     286             :     m_aFromRB(this,             SW_RES(  RB_FROM             ) ),
     287             :     m_aFromNF(this,             SW_RES(  NF_FROM             ) ),
     288             :     m_aToFT(this,               SW_RES(  FT_TO               ) ),
     289             :     m_aToNF(this,               SW_RES(  NF_TO               ) ),
     290             :     m_aSaveNowPB(this,          SW_RES(  PB_SAVENOW          ) ),
     291             : 
     292             :     m_aPrinterFT(this,          SW_RES(  FT_PRINT            ) ),
     293             :     m_aPrinterLB(this,          SW_RES(  LB_PRINT            ) ),
     294             :     m_aPrinterSettingsPB(this,  SW_RES(  PB_PRINTERSETTINGS  ) ),
     295             :     m_aPrintNowPB(this,         SW_RES(  PB_PRINTNOW         ) ),
     296             : 
     297             :     m_aMailToFT( this, SW_RES(        FT_MAILTO              ) ),
     298             :     m_aMailToLB( this, SW_RES(        LB_MAILTO              ) ),
     299             :     m_aCopyToPB( this, SW_RES(        PB_COPYTO              ) ),
     300             :     m_aSubjectFT( this, SW_RES(       FT_SUBJECT             ) ),
     301             :     m_aSubjectED( this, SW_RES(       ED_SUBJECT             ) ),
     302             :     m_aSendAsFT( this, SW_RES(        FT_SENDAS              ) ),
     303             :     m_aSendAsLB( this, SW_RES(        LB_SENDAS              ) ),
     304             :     m_aAttachmentFT( this, SW_RES(    FT_ATTACHMENT              ) ),
     305             :     m_aAttachmentED( this, SW_RES(    ED_ATTACHMENT              ) ),
     306             :     m_aSendAsPB( this, SW_RES(        PB_SENDAS              ) ),
     307             :     m_aSendDocumentsPB( this, SW_RES( PB_SENDDOCUMENTS       ) ),
     308             : 
     309             :     m_sSaveStartST(SW_RES(           ST_SAVESTART  ) ),
     310             :     m_sSaveMergedST(SW_RES(          ST_SAVEMERGED ) ),
     311             :     m_sPrintST(SW_RES(               ST_PRINT      ) ),
     312             :     m_sSendMailST(SW_RES(            ST_SENDMAIL   ) ),
     313             : 
     314             :     m_sDefaultAttachmentST(SW_RES(   ST_DEFAULTATTACHMENT )),
     315             :     m_sNoSubjectQueryST(SW_RES(      ST_SUBJECTQUERY      )),
     316             :     m_sNoSubjectST(SW_RES(           ST_NOSUBJECT )),
     317             :     m_sNoAttachmentNameST(SW_RES(    ST_NOATTACHMENTNAME )),
     318             :     m_sConfigureMail(SW_RES(         ST_CONFIGUREMAIL)),
     319             : #ifdef _MSC_VER
     320             : #pragma warning (default : 4355)
     321             : #endif
     322             :     m_bCancelSaving( false ),
     323             :     m_pWizard(_pParent),
     324           0 :     m_pTempPrinter( 0 )
     325             : {
     326           0 :     FreeResource();
     327             : 
     328           0 :     SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     329             :     // #i51949# hide e-Mail option if e-Mail is not supported
     330           0 :     if(!rConfigItem.IsMailAvailable())
     331           0 :         m_aSendMailRB.Hide();
     332             : 
     333           0 :     Link aLink = LINK(this, SwMailMergeOutputPage, OutputTypeHdl_Impl);
     334           0 :     m_aSaveStartDocRB.SetClickHdl(aLink);
     335           0 :     m_aSaveMergedDocRB.SetClickHdl(aLink);
     336           0 :     m_aPrintRB.SetClickHdl(aLink);
     337           0 :     m_aSendMailRB.SetClickHdl(aLink);
     338           0 :     m_aSaveStartDocRB.Check();
     339           0 :     m_aPrintAllRB.Check();
     340           0 :     m_aSaveAsOneRB.Check();
     341           0 :     m_aSendAllRB.Check();
     342             : 
     343           0 :     m_aSaveStartDocPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, SaveStartHdl_Impl));
     344           0 :     m_aSaveNowPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, SaveOutputHdl_Impl));
     345           0 :     m_aPrinterLB.SetSelectHdl(LINK(this, SwMailMergeOutputPage, PrinterChangeHdl_Impl));
     346           0 :     m_aPrintNowPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, PrintHdl_Impl));
     347           0 :     m_aPrinterSettingsPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, PrinterSetupHdl_Impl));
     348             : 
     349           0 :     m_aSendAsPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, SendAsHdl_Impl)),
     350           0 :     m_aSendDocumentsPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, SendDocumentsHdl_Impl)),
     351           0 :     m_aSendAsLB.SetSelectHdl(LINK(this, SwMailMergeOutputPage, SendTypeHdl_Impl));
     352             : 
     353           0 :     m_nFromToRBPos = m_aFromRB.GetPosPixel().Y();
     354           0 :     m_nFromToFTPos = m_aToFT.GetPosPixel().Y();
     355           0 :     m_nFromToNFPos = m_aFromNF.GetPosPixel().Y();
     356             : 
     357           0 :     m_nRBOffset = m_nFromToRBPos - m_aSaveIndividualRB.GetPosPixel().Y();
     358             : 
     359           0 :     OutputTypeHdl_Impl(&m_aSaveStartDocRB);
     360             : 
     361           0 :     m_aCopyToPB.SetClickHdl(LINK(this, SwMailMergeOutputPage, CopyToHdl_Impl));
     362             : 
     363           0 :     m_aSaveAsOneRB.SetClickHdl(LINK(this, SwMailMergeOutputPage, DocumentSelectionHdl_Impl));
     364           0 :     m_aSaveIndividualRB.SetClickHdl(LINK(this, SwMailMergeOutputPage, DocumentSelectionHdl_Impl));
     365           0 :     m_aPrintAllRB.SetClickHdl(LINK(this, SwMailMergeOutputPage, DocumentSelectionHdl_Impl));
     366           0 :     m_aSendAllRB.SetClickHdl(LINK(this, SwMailMergeOutputPage, DocumentSelectionHdl_Impl));
     367             : 
     368           0 :     m_aFromRB.SetClickHdl(LINK(this, SwMailMergeOutputPage, DocumentSelectionHdl_Impl));
     369             :     //#i63267# printing might be disabled
     370           0 :     m_aPrintRB.Enable(!Application::GetSettings().GetMiscSettings().GetDisablePrinting());
     371           0 : }
     372             : 
     373           0 : SwMailMergeOutputPage::~SwMailMergeOutputPage()
     374             : {
     375           0 :     delete m_pTempPrinter;
     376           0 : }
     377             : 
     378           0 : void SwMailMergeOutputPage::ActivatePage()
     379             : {
     380             :     //fill printer ListBox
     381           0 :     const std::vector<OUString>& rPrinters = Printer::GetPrinterQueues();
     382           0 :     unsigned int nCount = rPrinters.size();
     383           0 :     if ( nCount )
     384             :     {
     385           0 :         for( unsigned int i = 0; i < nCount; i++ )
     386             :         {
     387           0 :             m_aPrinterLB.InsertEntry( rPrinters[i] );
     388             :         }
     389             : 
     390             :     }
     391           0 :     SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     392             : 
     393           0 :     SwView* pTargetView = rConfigItem.GetTargetView();
     394             :     OSL_ENSURE(pTargetView, "no target view exists");
     395           0 :     if(pTargetView)
     396             :     {
     397           0 :         SfxPrinter* pPrinter = pTargetView->GetWrtShell().getIDocumentDeviceAccess()->getPrinter( true );
     398           0 :         m_aPrinterLB.SelectEntry( pPrinter->GetName() );
     399           0 :         m_aToNF.SetValue( rConfigItem.GetMergedDocumentCount() );
     400           0 :         m_aToNF.SetMax( rConfigItem.GetMergedDocumentCount() );
     401             :     }
     402           0 :     m_aPrinterLB.SelectEntry( rConfigItem.GetSelectedPrinter() );
     403             : 
     404           0 :     SwView* pSourceView = rConfigItem.GetSourceView();
     405             :     OSL_ENSURE(pSourceView, "no source view exists");
     406           0 :     if(pSourceView)
     407             :     {
     408           0 :         SwDocShell* pDocShell = pSourceView->GetDocShell();
     409           0 :         if ( pDocShell->HasName() )
     410             :         {
     411           0 :             INetURLObject aTmp( pDocShell->GetMedium()->GetName() );
     412             :             m_aAttachmentED.SetText(aTmp.getName(
     413           0 :                     INetURLObject::LAST_SEGMENT, true, INetURLObject::DECODE_WITH_CHARSET ));
     414             :         }
     415             :     }
     416           0 : }
     417             : 
     418           0 : bool SwMailMergeOutputPage::canAdvance() const
     419             : {
     420           0 :     return false;
     421             : }
     422             : 
     423           0 : IMPL_LINK(SwMailMergeOutputPage, OutputTypeHdl_Impl, RadioButton*, pButton)
     424             : {
     425             :     Control* aControls[] =
     426             :     {
     427             :         &m_aSaveStartDocPB,
     428             :         &m_aSaveAsOneRB, &m_aSaveIndividualRB,
     429             :         &m_aFromRB, &m_aFromNF, &m_aToFT, &m_aToNF,
     430             :         &m_aSaveNowPB,
     431             :         &m_aPrinterFT, &m_aPrinterLB, &m_aPrinterSettingsPB, &m_aPrintAllRB,
     432             :         &m_aPrintNowPB,
     433             :         &m_aMailToFT, &m_aMailToLB, &m_aCopyToPB,
     434             :         &m_aSubjectFT, &m_aSubjectED,
     435             :         &m_aSendAsFT, &m_aSendAsLB, &m_aSendAsPB,
     436             :         &m_aAttachmentFT, &m_aAttachmentED,
     437             :         &m_aSendAllRB, &m_aSendDocumentsPB,
     438             :         0
     439           0 :     };
     440           0 :     SetUpdateMode(sal_True);
     441           0 :     Control** pControl = aControls;
     442           0 :     do
     443             :     {
     444           0 :         (*pControl)->Show(sal_False);
     445             : 
     446             :     } while(*(++pControl));
     447             : 
     448           0 :     if(&m_aSaveStartDocRB == pButton)
     449             :     {
     450           0 :         m_aSaveStartDocPB.Show();
     451           0 :         m_aSeparatorFL.SetText(m_sSaveStartST);
     452             : 
     453             :     }
     454           0 :     else if(&m_aSaveMergedDocRB == pButton)
     455             :     {
     456             :         Control* aSaveMergedControls[] =
     457             :         {
     458             :             &m_aSaveAsOneRB, &m_aSaveIndividualRB,
     459             :             &m_aFromRB, &m_aFromNF, &m_aToFT, &m_aToNF,
     460             :             &m_aSaveNowPB,
     461             :             0
     462           0 :         };
     463           0 :         Control** pSaveMergeControl = aSaveMergedControls;
     464           0 :         do
     465             :         {
     466           0 :             (*pSaveMergeControl)->Show(sal_True);
     467             : 
     468             :         } while(*(++pSaveMergeControl));
     469           0 :         if(!m_aFromRB.IsChecked() && !m_aSaveAsOneRB.IsChecked())
     470             :         {
     471           0 :             m_aSaveIndividualRB.Check();
     472             :         }
     473           0 :         m_aSeparatorFL.SetText(m_sSaveMergedST);
     474             :         //reposition the from/to line
     475           0 :         if(m_aFromRB.GetPosPixel().Y() != m_nFromToRBPos)
     476             :         {
     477           0 :             Point aPos(m_aFromRB.GetPosPixel()); aPos.Y() = m_nFromToRBPos; m_aFromRB.SetPosPixel(aPos);
     478           0 :             aPos =   m_aToFT.GetPosPixel();      aPos.Y() = m_nFromToFTPos; m_aToFT.SetPosPixel(aPos);
     479           0 :             aPos =   m_aFromNF.GetPosPixel();    aPos.Y() = m_nFromToNFPos; m_aFromNF.SetPosPixel(aPos);
     480           0 :             aPos =   m_aToNF.GetPosPixel();      aPos.Y() = m_nFromToNFPos; m_aToNF.SetPosPixel(aPos);
     481             :         }
     482             :     }
     483           0 :     else if(&m_aPrintRB == pButton)
     484             :     {
     485             :         Control* aPrintControls[] =
     486             :         {
     487             :             &m_aFromRB, &m_aFromNF, &m_aToFT, &m_aToNF,
     488             :             &m_aPrinterFT, &m_aPrinterLB, &m_aPrinterSettingsPB, &m_aPrintAllRB,
     489             :             &m_aPrintNowPB,
     490             :             0
     491           0 :         };
     492           0 :         Control** pPrinterControl = aPrintControls;
     493           0 :         do
     494             :         {
     495           0 :             (*pPrinterControl)->Show(sal_True);
     496             : 
     497             :         } while(*(++pPrinterControl));
     498           0 :         if(!m_aFromRB.IsChecked())
     499           0 :             m_aPrintAllRB.Check();
     500             : 
     501           0 :         m_aSeparatorFL.SetText(m_sPrintST);
     502             :         //reposition the from/to line
     503           0 :         long nRB_FT_Offset = m_nFromToRBPos - m_nFromToFTPos;
     504           0 :         long nNewRBXPos = m_aPrintAllRB.GetPosPixel().Y() + m_nRBOffset;
     505             : 
     506           0 :         Point aPos(m_aFromRB.GetPosPixel());aPos.Y() = nNewRBXPos;                 m_aFromRB.SetPosPixel(aPos);
     507           0 :         aPos = m_aToFT.GetPosPixel();       aPos.Y() = nNewRBXPos + nRB_FT_Offset; m_aToFT.SetPosPixel(aPos);
     508           0 :         aPos = m_aFromNF.GetPosPixel();     aPos.Y() = nNewRBXPos + nRB_FT_Offset; m_aFromNF.SetPosPixel(aPos);
     509           0 :         aPos = m_aToNF.GetPosPixel();       aPos.Y() = nNewRBXPos + nRB_FT_Offset; m_aToNF.SetPosPixel(aPos);
     510             :     }
     511             :     else
     512             :     {
     513             :         Control* aMailControls[] =
     514             :         {
     515             :             &m_aFromRB, &m_aFromNF, &m_aToFT, &m_aToNF,
     516             :             &m_aMailToFT, &m_aMailToLB, &m_aCopyToPB,
     517             :             &m_aSubjectFT, &m_aSubjectED,
     518             :             &m_aSendAsFT, &m_aSendAsLB, &m_aSendAsPB,
     519             :             &m_aAttachmentFT, &m_aAttachmentED,
     520             :             &m_aSendAllRB, &m_aSendDocumentsPB, 0
     521           0 :         };
     522           0 :         Control** pMailControl = aMailControls;
     523           0 :         do
     524             :         {
     525           0 :             (*pMailControl)->Show(sal_True);
     526             : 
     527             :         } while(*(++pMailControl));
     528             : 
     529           0 :         if(!m_aFromRB.IsChecked())
     530           0 :             m_aSendAllRB.Check();
     531           0 :         if(m_aAttachmentED.GetText().isEmpty())
     532             :         {
     533           0 :             String sAttach( m_sDefaultAttachmentST );
     534           0 :             sAttach += '.';
     535           0 :             sAttach += lcl_GetExtensionForDocType(
     536           0 :                         (sal_uLong)m_aSendAsLB.GetEntryData(m_aSendAsLB.GetSelectEntryPos()));
     537           0 :             m_aAttachmentED.SetText( sAttach );
     538             : 
     539             :         }
     540           0 :         m_aSeparatorFL.SetText(m_sSendMailST);
     541             :         //fill mail address ListBox
     542           0 :         if(!m_aMailToLB.GetEntryCount())
     543             :         {
     544           0 :             SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     545             :             //select first column
     546           0 :             uno::Reference< sdbcx::XColumnsSupplier > xColsSupp( rConfigItem.GetResultSet(), uno::UNO_QUERY);
     547             :             //get the name of the actual columns
     548           0 :             uno::Reference < container::XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : 0;
     549           0 :             uno::Sequence< OUString > aFields;
     550           0 :             if(xColAccess.is())
     551           0 :                 aFields = xColAccess->getElementNames();
     552           0 :             const OUString* pFields = aFields.getConstArray();
     553           0 :             for(sal_Int32 nField = 0; nField < aFields.getLength(); ++nField)
     554           0 :                 m_aMailToLB.InsertEntry(pFields[nField]);
     555             : 
     556           0 :             m_aMailToLB.SelectEntryPos(0);
     557             :             // then select the right one - may not be available
     558           0 :             const ResStringArray& rHeaders = rConfigItem.GetDefaultAddressHeaders();
     559           0 :             String sEMailColumn = rHeaders.GetString( MM_PART_E_MAIL );
     560             :             Sequence< OUString> aAssignment =
     561           0 :                             rConfigItem.GetColumnAssignment( rConfigItem.GetCurrentDBData() );
     562           0 :             if(aAssignment.getLength() > MM_PART_E_MAIL && !aAssignment[MM_PART_E_MAIL].isEmpty())
     563           0 :                 sEMailColumn = aAssignment[MM_PART_E_MAIL];
     564           0 :             m_aMailToLB.SelectEntry(sEMailColumn);
     565             :             // HTML format pre-selected
     566           0 :             m_aSendAsLB.SelectEntryPos(3);
     567           0 :             SendTypeHdl_Impl(&m_aSendAsLB);
     568             :         }
     569           0 :         if(m_aSendAllRB.GetPosPixel().Y() + m_nRBOffset != m_aFromRB.GetPosPixel().Y())
     570             :         {
     571           0 :             long nRB_FT_Offset = m_nFromToRBPos - m_nFromToFTPos;
     572           0 :             long nNewRBXPos = m_aSendAllRB.GetPosPixel().Y() + m_nRBOffset;
     573             : 
     574           0 :             Point aPos(m_aFromRB.GetPosPixel());aPos.Y() = nNewRBXPos;                 m_aFromRB.SetPosPixel(aPos);
     575           0 :             aPos = m_aToFT.GetPosPixel();       aPos.Y() = nNewRBXPos + nRB_FT_Offset; m_aToFT.SetPosPixel(aPos);
     576           0 :             aPos = m_aFromNF.GetPosPixel();     aPos.Y() = nNewRBXPos + nRB_FT_Offset; m_aFromNF.SetPosPixel(aPos);
     577           0 :             aPos = m_aToNF.GetPosPixel();       aPos.Y() = nNewRBXPos + nRB_FT_Offset; m_aToNF.SetPosPixel(aPos);
     578             :         }
     579             :     }
     580           0 :     m_aFromRB.GetClickHdl().Call(m_aFromRB.IsChecked() ? &m_aFromRB : 0);
     581             : 
     582           0 :     SetUpdateMode(sal_False);
     583           0 :     return 0;
     584             : }
     585             : 
     586           0 : IMPL_LINK(SwMailMergeOutputPage, DocumentSelectionHdl_Impl, RadioButton*, pButton)
     587             : {
     588           0 :     sal_Bool bEnableFromTo = pButton == &m_aFromRB;
     589           0 :     m_aFromNF.Enable(bEnableFromTo);
     590           0 :     m_aToFT.Enable(bEnableFromTo);
     591           0 :     m_aToNF.Enable(bEnableFromTo);
     592           0 :     return 0;
     593             : }
     594             : 
     595           0 : IMPL_LINK(SwMailMergeOutputPage, CopyToHdl_Impl, PushButton*, pButton)
     596             : {
     597           0 :     SwCopyToDialog* pDlg = new SwCopyToDialog(pButton);
     598           0 :     pDlg->SetCC(m_sCC );
     599           0 :     pDlg->SetBCC(m_sBCC);
     600           0 :     if(RET_OK == pDlg->Execute())
     601             :     {
     602           0 :         m_sCC =     pDlg->GetCC() ;
     603           0 :         m_sBCC =    pDlg->GetBCC();
     604             :     }
     605           0 :     delete pDlg;
     606           0 :     return 0;
     607             : }
     608             : 
     609           0 : IMPL_LINK(SwMailMergeOutputPage, SaveStartHdl_Impl, PushButton*, pButton)
     610             : {
     611           0 :     SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     612           0 :     SwView* pSourceView = rConfigItem.GetSourceView();
     613             :     OSL_ENSURE( pSourceView, "source view missing");
     614           0 :     if(pSourceView)
     615             :     {
     616           0 :         SfxViewFrame* pSourceViewFrm = pSourceView->GetViewFrame();
     617             :         uno::Reference< frame::XFrame > xFrame =
     618           0 :                 pSourceViewFrm->GetFrame().GetFrameInterface();
     619           0 :         xFrame->getContainerWindow()->setVisible(sal_True);
     620           0 :         pSourceViewFrm->GetDispatcher()->Execute(SID_SAVEDOC, SFX_CALLMODE_SYNCHRON);
     621           0 :         xFrame->getContainerWindow()->setVisible(sal_False);
     622           0 :         SwDocShell* pDocShell = pSourceView->GetDocShell();
     623             :         //if the document has been saved it's URL has to be stored for
     624             :         // later use and it can be closed now
     625           0 :         if(pDocShell->HasName() && !pDocShell->IsModified())
     626             :         {
     627           0 :             INetURLObject aURL = pDocShell->GetMedium()->GetURLObject();
     628             :             //update the attachment name
     629           0 :             if(m_aAttachmentED.GetText().isEmpty())
     630             :             {
     631           0 :                 if ( pDocShell->HasName() )
     632             :                 {
     633             :                     m_aAttachmentED.SetText(aURL.getName(
     634           0 :                             INetURLObject::LAST_SEGMENT, true, INetURLObject::DECODE_WITH_CHARSET ));
     635             :                 }
     636             :             }
     637             : 
     638             :             rConfigItem.AddSavedDocument(
     639           0 :                     aURL.GetMainURL(INetURLObject::DECODE_TO_IURI));
     640           0 :             pButton->Enable(sal_False);
     641           0 :             m_pWizard->enableButtons(WZB_FINISH, sal_True);
     642           0 :             pButton->Enable(sal_False);
     643             : 
     644           0 :         }
     645             :     }
     646           0 :     return 0;
     647             : }
     648             : 
     649           0 : IMPL_LINK_NOARG(SwMailMergeOutputPage, SaveCancelHdl_Impl)
     650             : {
     651           0 :     m_bCancelSaving = true;
     652           0 :     return 0;
     653             : }
     654             : 
     655           0 : IMPL_LINK(SwMailMergeOutputPage, SaveOutputHdl_Impl, PushButton*, pButton)
     656             : {
     657           0 :     SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     658           0 :     SwView* pTargetView = rConfigItem.GetTargetView();
     659             :     OSL_ENSURE(pTargetView, "no target view exists");
     660           0 :     if(!pTargetView)
     661           0 :         return 0;
     662             : 
     663           0 :     if(m_aSaveAsOneRB.IsChecked())
     664             :     {
     665           0 :         String sFilter;
     666           0 :         String sPath = SwMailMergeHelper::CallSaveAsDialog(sFilter);
     667           0 :         if(!sPath.Len())
     668           0 :             return 0;
     669           0 :         uno::Sequence< beans::PropertyValue > aValues(1);
     670           0 :         beans::PropertyValue* pValues = aValues.getArray();
     671           0 :         pValues[0].Name = "FilterName";
     672           0 :         pValues[0].Value <<= OUString(sFilter);
     673             : 
     674           0 :         uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY);
     675           0 :         sal_uInt32 nErrorCode = ERRCODE_NONE;
     676             :         try
     677             :         {
     678           0 :             xStore->storeToURL( sPath, aValues );
     679             :         }
     680           0 :         catch (const task::ErrorCodeIOException& rErrorEx)
     681             :         {
     682           0 :             nErrorCode = (sal_uInt32)rErrorEx.ErrCode;
     683             :         }
     684           0 :         catch (const Exception&)
     685             :         {
     686           0 :             nErrorCode = ERRCODE_IO_GENERAL;
     687             :         }
     688           0 :         if( nErrorCode != ERRCODE_NONE )
     689             :         {
     690           0 :             SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC, pTargetView->GetDocShell()->GetTitle());
     691           0 :             ErrorHandler::HandleError( nErrorCode );
     692           0 :         }
     693             :     }
     694             :     else
     695             :     {
     696           0 :         sal_uInt32 nBegin = 0;
     697           0 :         sal_uInt32 nEnd = 0;
     698           0 :         if(m_aSaveIndividualRB.IsChecked())
     699             :         {
     700           0 :             nBegin = 0;
     701           0 :             nEnd = rConfigItem.GetMergedDocumentCount();
     702             :         }
     703             :         else
     704             :         {
     705           0 :             nBegin  = static_cast< sal_Int32 >(m_aFromNF.GetValue() - 1);
     706           0 :             nEnd    = static_cast< sal_Int32 >(m_aToNF.GetValue());
     707           0 :             if(nEnd > rConfigItem.GetMergedDocumentCount())
     708           0 :                 nEnd = rConfigItem.GetMergedDocumentCount();
     709             :         }
     710           0 :         String sFilter;
     711           0 :         String sPath = SwMailMergeHelper::CallSaveAsDialog(sFilter);
     712           0 :         if(!sPath.Len())
     713           0 :             return 0;
     714             :         String sTargetTempURL = URIHelper::SmartRel2Abs(
     715             :             INetURLObject(), utl::TempFile::CreateTempName(),
     716           0 :             URIHelper::GetMaybeFileHdl());
     717             :         const SfxFilter *pSfxFlt = SwIoSystem::GetFilterOfFormat(
     718             :                 OUString( FILTER_XML ),
     719           0 :                 SwDocShell::Factory().GetFilterContainer() );
     720             : 
     721           0 :         uno::Sequence< beans::PropertyValue > aValues(1);
     722           0 :         beans::PropertyValue* pValues = aValues.getArray();
     723           0 :         pValues[0].Name = "FilterName";
     724           0 :         pValues[0].Value <<= OUString(pSfxFlt->GetFilterName());
     725             : 
     726           0 :         uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY);
     727           0 :         sal_uInt32 nErrorCode = ERRCODE_NONE;
     728             :         try
     729             :         {
     730           0 :             xStore->storeToURL( sTargetTempURL, aValues );
     731             :         }
     732           0 :         catch (const task::ErrorCodeIOException& rErrorEx)
     733             :         {
     734           0 :             nErrorCode = (sal_uInt32)rErrorEx.ErrCode;
     735             :         }
     736           0 :         catch (const Exception&)
     737             :         {
     738           0 :             nErrorCode = ERRCODE_IO_GENERAL;
     739             :         }
     740           0 :         if( nErrorCode != ERRCODE_NONE )
     741             :         {
     742           0 :             SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC, pTargetView->GetDocShell()->GetTitle());
     743           0 :             ErrorHandler::HandleError( nErrorCode );
     744             :         }
     745             : 
     746           0 :         SwView* pSourceView = rConfigItem.GetSourceView();
     747           0 :         PrintMonitor aSaveMonitor(this, PrintMonitor::MONITOR_TYPE_SAVE);
     748           0 :         aSaveMonitor.aDocName.SetText(pSourceView->GetDocShell()->GetTitle(22));
     749           0 :         aSaveMonitor.aCancel.SetClickHdl(LINK(this, SwMailMergeOutputPage, SaveCancelHdl_Impl));
     750           0 :         aSaveMonitor.aPrinter.SetText( INetURLObject( sPath ).getFSysPath( INetURLObject::FSYS_DETECT ) );
     751           0 :         aSaveMonitor.ResizeControls();
     752             : 
     753           0 :         m_bCancelSaving = false;
     754           0 :         aSaveMonitor.Show();
     755           0 :         m_pWizard->enableButtons(WZB_CANCEL, sal_False);
     756             : 
     757           0 :         for(sal_uInt32 nDoc = nBegin; nDoc < nEnd && !m_bCancelSaving; ++nDoc)
     758             :         {
     759           0 :             SwDocMergeInfo& rInfo = rConfigItem.GetDocumentMergeInfo(nDoc);
     760           0 :             INetURLObject aURL(sPath);
     761           0 :             String sExtension = aURL.getExtension();
     762           0 :             if(!sExtension.Len())
     763             :             {
     764           0 :                 sExtension = comphelper::string::getToken(pSfxFlt->GetWildcard().getGlob(), 1, '.');
     765           0 :                 sPath += '.';
     766           0 :                 sPath += sExtension;
     767             :             }
     768           0 :             String sStat(SW_RES(STR_STATSTR_LETTER));
     769           0 :             sStat += ' ';
     770           0 :             sStat += OUString::number( nDoc );
     771           0 :             aSaveMonitor.aPrintInfo.SetText(sStat);
     772             : 
     773             :             //now extract a document from the target document
     774             :             // the shell will be closed at the end, but it is more safe to use SfxObjectShellLock here
     775           0 :             SfxObjectShellLock xTempDocShell( new SwDocShell( SFX_CREATE_MODE_STANDARD ) );
     776           0 :             xTempDocShell->DoInitNew( 0 );
     777           0 :             SfxViewFrame* pTempFrame = SfxViewFrame::LoadHiddenDocument( *xTempDocShell, 0 );
     778           0 :             SwView* pTempView = static_cast<SwView*>( pTempFrame->GetViewShell() );
     779           0 :             pTargetView->GetWrtShell().StartAction();
     780           0 :             SwgReaderOption aOpt;
     781           0 :             aOpt.SetTxtFmts( sal_True );
     782           0 :             aOpt.SetFrmFmts( sal_True );
     783           0 :             aOpt.SetPageDescs( sal_True );
     784           0 :             aOpt.SetNumRules( sal_True );
     785           0 :             aOpt.SetMerge( sal_False );
     786             :             pTempView->GetDocShell()->LoadStylesFromFile(
     787           0 :                     sTargetTempURL, aOpt, sal_True );
     788             : 
     789           0 :             pTargetView->GetWrtShell().PastePages(pTempView->GetWrtShell(),
     790           0 :                     (sal_uInt16)rInfo.nStartPageInTarget, (sal_uInt16)rInfo.nEndPageInTarget );
     791           0 :             pTargetView->GetWrtShell().EndAction();
     792             :             //then save it
     793           0 :             String sOutPath = aURL.GetMainURL(INetURLObject::DECODE_TO_IURI);
     794           0 :             String sCounter = OUString('_');
     795           0 :             sCounter += OUString::number(nDoc);
     796           0 :             sOutPath.Insert(sCounter, sOutPath.Len() - sExtension.Len() - 1);
     797             : 
     798             :             while(true)
     799             :             {
     800             :                 //time for other slots is needed
     801           0 :                 for(sal_Int16 r = 0; r < 10; ++r)
     802           0 :                     Application::Reschedule();
     803           0 :                 bool bFailed = false;
     804             :                 try
     805             :                 {
     806           0 :                     pValues[0].Value <<= OUString(sFilter);
     807           0 :                     uno::Reference< frame::XStorable > xTempStore( xTempDocShell->GetModel(), uno::UNO_QUERY);
     808           0 :                     xTempStore->storeToURL( sOutPath, aValues   );
     809             :                 }
     810           0 :                 catch (const uno::Exception&)
     811             :                 {
     812           0 :                     bFailed = true;
     813             :                 }
     814             : 
     815           0 :                 if(bFailed)
     816             :                 {
     817           0 :                     SwSaveWarningBox_Impl aWarning( pButton, sOutPath );
     818           0 :                     if(RET_OK == aWarning.Execute())
     819           0 :                         sOutPath = aWarning.GetFileName();
     820             :                     else
     821             :                     {
     822           0 :                         xTempDocShell->DoClose();
     823           0 :                         return 0;
     824           0 :                     }
     825             :                 }
     826             :                 else
     827             :                 {
     828           0 :                     xTempDocShell->DoClose();
     829           0 :                     break;
     830             :                 }
     831             :             }
     832           0 :         }
     833           0 :         ::osl::File::remove( sTargetTempURL );
     834             :     }
     835           0 :     m_pWizard->enableButtons(WZB_CANCEL, sal_True);
     836           0 :     m_pWizard->enableButtons(WZB_FINISH, sal_True);
     837           0 :     return 0;
     838             : }
     839             : 
     840           0 : IMPL_LINK(SwMailMergeOutputPage, PrinterChangeHdl_Impl, ListBox*, pBox)
     841             : {
     842           0 :     SwView *const pTargetView = m_pWizard->GetConfigItem().GetTargetView();
     843           0 :     SfxPrinter *const pDocumentPrinter = pTargetView->GetWrtShell()
     844           0 :         .getIDocumentDeviceAccess()->getPrinter(true);
     845           0 :     if (pDocumentPrinter && pBox->GetSelectEntryPos() != LISTBOX_ENTRY_NOTFOUND)
     846             :     {
     847           0 :         const QueueInfo* pInfo = Printer::GetQueueInfo( pBox->GetSelectEntry(), false );
     848             : 
     849           0 :         if( pInfo )
     850             :         {
     851           0 :             if ( !m_pTempPrinter )
     852             :             {
     853           0 :                 if ((pDocumentPrinter->GetName() == pInfo->GetPrinterName()) &&
     854           0 :                     (pDocumentPrinter->GetDriverName() == pInfo->GetDriver()))
     855             :                 {
     856           0 :                     m_pTempPrinter = new Printer(pDocumentPrinter->GetJobSetup());
     857             :                 }
     858             :                 else
     859           0 :                     m_pTempPrinter = new Printer( *pInfo );
     860             :             }
     861             :             else
     862             :             {
     863           0 :                 if( (m_pTempPrinter->GetName() != pInfo->GetPrinterName()) ||
     864           0 :                      (m_pTempPrinter->GetDriverName() != pInfo->GetDriver()) )
     865             :                 {
     866           0 :                     delete m_pTempPrinter;
     867           0 :                     m_pTempPrinter = new Printer( *pInfo );
     868             :                 }
     869             :             }
     870             :         }
     871           0 :         else if( ! m_pTempPrinter )
     872           0 :             m_pTempPrinter = new Printer();
     873             : 
     874           0 :         m_aPrinterSettingsPB.Enable( m_pTempPrinter->HasSupport( SUPPORT_SETUPDIALOG ) );
     875             :     }
     876             :     else
     877           0 :         m_aPrinterSettingsPB.Disable();
     878           0 :     m_pWizard->GetConfigItem().SetSelectedPrinter( pBox->GetSelectEntry() );
     879             : 
     880           0 :     return 0;
     881             : }
     882             : 
     883           0 : IMPL_LINK_NOARG(SwMailMergeOutputPage, PrintHdl_Impl)
     884             : {
     885           0 :     SwView* pTargetView = m_pWizard->GetConfigItem().GetTargetView();
     886             :     OSL_ENSURE(pTargetView, "no target view exists");
     887           0 :     if(!pTargetView)
     888           0 :         return 0;
     889             : 
     890           0 :     sal_uInt32 nBegin = 0;
     891           0 :     sal_uInt32 nEnd = 0;
     892           0 :     SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     893           0 :     if(m_aPrintAllRB.IsChecked())
     894             :     {
     895           0 :         nBegin = 0;
     896           0 :         nEnd = rConfigItem.GetMergedDocumentCount();
     897             :     }
     898             :     else
     899             :     {
     900           0 :         nBegin  = static_cast< sal_Int32 >(m_aFromNF.GetValue() - 1);
     901           0 :         nEnd    = static_cast< sal_Int32 >(m_aToNF.GetValue());
     902           0 :         if(nEnd > rConfigItem.GetMergedDocumentCount())
     903           0 :             nEnd = rConfigItem.GetMergedDocumentCount();
     904             :     }
     905           0 :     rConfigItem.SetPrintRange( (sal_uInt16)nBegin, (sal_uInt16)nEnd );
     906           0 :     SwDocMergeInfo& rStartInfo = rConfigItem.GetDocumentMergeInfo(nBegin);
     907           0 :     SwDocMergeInfo& rEndInfo = rConfigItem.GetDocumentMergeInfo(nEnd - 1);
     908             : 
     909           0 :     OUString sPages(OUString::valueOf( rStartInfo.nStartPageInTarget ));
     910           0 :     sPages += OUString(" - ");
     911           0 :     sPages += OUString::valueOf(  rEndInfo.nEndPageInTarget );
     912             : 
     913           0 :     SwWrtShell& rSh = pTargetView->GetWrtShell();
     914           0 :     pTargetView->SetMailMergeConfigItem(&rConfigItem, 0, sal_False);
     915           0 :     if(m_pTempPrinter)
     916             :     {
     917           0 :         SfxPrinter *const pDocumentPrinter = pTargetView->GetWrtShell()
     918           0 :             .getIDocumentDeviceAccess()->getPrinter(true);
     919           0 :         pDocumentPrinter->SetPrinterProps(m_pTempPrinter);
     920             :         // this should be able to handle setting its own printer
     921           0 :         pTargetView->SetPrinter(pDocumentPrinter);
     922             :     }
     923             : 
     924           0 :     SfxObjectShell* pObjSh = pTargetView->GetViewFrame()->GetObjectShell();
     925           0 :     SFX_APP()->NotifyEvent(SfxEventHint(SW_EVENT_MAIL_MERGE, SwDocShell::GetEventName(STR_SW_EVENT_MAIL_MERGE), pObjSh));
     926           0 :     rSh.GetNewDBMgr()->SetMergeType( DBMGR_MERGE_DOCUMENTS );
     927           0 :     SfxBoolItem aMergeSilent(SID_SILENT, sal_False);
     928           0 :     m_pWizard->enableButtons(WZB_CANCEL, sal_False);
     929             : 
     930           0 :     uno::Sequence < beans::PropertyValue > aProps( 2 );
     931           0 :     aProps[0]. Name = OUString("MonitorVisible");
     932           0 :     aProps[0].Value <<= sal_True;
     933           0 :     aProps[1]. Name = OUString("Pages");
     934           0 :     aProps[1]. Value <<= sPages;
     935             : 
     936           0 :     pTargetView->ExecPrint( aProps, false, true );
     937           0 :     SFX_APP()->NotifyEvent(SfxEventHint(SW_EVENT_MAIL_MERGE_END, SwDocShell::GetEventName(STR_SW_EVENT_MAIL_MERGE_END), pObjSh));
     938             : 
     939           0 :     pTargetView->SetMailMergeConfigItem(0, 0, sal_False);
     940           0 :     m_pWizard->enableButtons(WZB_CANCEL, sal_True);
     941           0 :     m_pWizard->enableButtons(WZB_FINISH, sal_True);
     942           0 :     return 0;
     943             : }
     944             : 
     945           0 : IMPL_LINK(SwMailMergeOutputPage, PrinterSetupHdl_Impl, PushButton*, pButton)
     946             : {
     947           0 :     if( !m_pTempPrinter )
     948           0 :         PrinterChangeHdl_Impl(&m_aPrinterLB);
     949           0 :     if(m_pTempPrinter)
     950           0 :         m_pTempPrinter->Setup(pButton);
     951           0 :     return 0;
     952             : }
     953             : 
     954           0 : IMPL_LINK(SwMailMergeOutputPage, SendTypeHdl_Impl, ListBox*, pBox)
     955             : {
     956           0 :     sal_uLong nDocType = (sal_uLong)pBox->GetEntryData(pBox->GetSelectEntryPos());
     957           0 :     sal_Bool bEnable = MM_DOCTYPE_HTML != nDocType && MM_DOCTYPE_TEXT != nDocType;
     958           0 :     m_aSendAsPB.Enable( bEnable );
     959           0 :     m_aAttachmentFT.Enable( bEnable );
     960           0 :     m_aAttachmentED.Enable( bEnable );
     961           0 :     if(bEnable)
     962             :     {
     963             :         //add the correct extension
     964           0 :         String sAttach(m_aAttachmentED.GetText());
     965             :         //do nothing if the user has removed the name - the warning will come early enough
     966           0 :         if(sAttach.Len())
     967             :         {
     968           0 :             xub_StrLen nTokenCount = comphelper::string::getTokenCount(sAttach, '.');
     969           0 :             if( 2 > nTokenCount)
     970             :             {
     971           0 :                 sAttach += '.';
     972           0 :                 ++nTokenCount;
     973             :             }
     974           0 :             sAttach.SetToken( nTokenCount - 1, '.', lcl_GetExtensionForDocType( nDocType ));
     975           0 :             m_aAttachmentED.SetText(sAttach);
     976           0 :         }
     977             :     }
     978           0 :     return 0;
     979             : }
     980             : 
     981           0 : IMPL_LINK(SwMailMergeOutputPage, SendAsHdl_Impl, PushButton*, pButton)
     982             : {
     983           0 :     SwMailBodyDialog* pDlg = new SwMailBodyDialog(pButton, m_pWizard);
     984           0 :     pDlg->SetBody(m_sBody);
     985           0 :     if(RET_OK == pDlg->Execute())
     986             :     {
     987           0 :         m_sBody = pDlg->GetBody();
     988             :     }
     989           0 :     return 0;
     990             : }
     991             : 
     992             : /*-------------------------------------------------------------------------
     993             :     Send documents as e-mail
     994             :   -----------------------------------------------------------------------*/
     995           0 : IMPL_LINK(SwMailMergeOutputPage, SendDocumentsHdl_Impl, PushButton*, pButton)
     996             : {
     997           0 :     SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem();
     998             : 
     999             :     //get the composed document
    1000           0 :     SwView* pTargetView = rConfigItem.GetTargetView();
    1001             :     OSL_ENSURE(pTargetView, "no target view exists");
    1002           0 :     if(!pTargetView)
    1003           0 :         return 0;
    1004             : 
    1005           0 :     if(rConfigItem.GetMailServer().isEmpty() ||
    1006           0 :             !SwMailMergeHelper::CheckMailAddress(rConfigItem.GetMailAddress()) )
    1007             :     {
    1008           0 :         QueryBox aQuery(pButton, WB_YES_NO_CANCEL, m_sConfigureMail);
    1009           0 :         sal_uInt16 nRet = aQuery.Execute();
    1010           0 :         if(RET_YES == nRet )
    1011             :         {
    1012           0 :             SfxAllItemSet aSet(pTargetView->GetPool());
    1013           0 :             SwMailConfigDlg* pDlg = new SwMailConfigDlg(pButton, aSet);
    1014           0 :             nRet = pDlg->Execute();
    1015           0 :             delete pDlg;
    1016             :         }
    1017             : 
    1018           0 :         if(nRet != RET_OK && nRet != RET_YES)
    1019           0 :             return 0;
    1020             :     }
    1021             :     //add the documents
    1022           0 :     sal_uInt32 nBegin = 0;
    1023           0 :     sal_uInt32 nEnd = 0;
    1024           0 :     if(m_aSendAllRB.IsChecked())
    1025             :     {
    1026           0 :         nBegin = 0;
    1027           0 :         nEnd = rConfigItem.GetMergedDocumentCount();
    1028             :     }
    1029             :     else
    1030             :     {
    1031           0 :         nBegin  = static_cast< sal_Int32 >(m_aFromNF.GetValue() - 1);
    1032           0 :         nEnd    = static_cast< sal_Int32 >(m_aToNF.GetValue());
    1033           0 :         if(nEnd > rConfigItem.GetMergedDocumentCount())
    1034           0 :             nEnd = rConfigItem.GetMergedDocumentCount();
    1035             :     }
    1036           0 :     bool bAsBody = false;
    1037           0 :     rtl_TextEncoding eEncoding = ::osl_getThreadTextEncoding();
    1038           0 :     SfxFilterContainer* pFilterContainer = SwDocShell::Factory().GetFilterContainer();
    1039           0 :     const SfxFilter *pSfxFlt = 0;
    1040           0 :     sal_uLong nDocType = (sal_uLong)m_aSendAsLB.GetEntryData(m_aSendAsLB.GetSelectEntryPos());
    1041           0 :     String sExtension = lcl_GetExtensionForDocType(nDocType);
    1042           0 :     switch( nDocType )
    1043             :     {
    1044             :         case MM_DOCTYPE_OOO:
    1045             :         {
    1046             :             //Make sure we don't pick e.g. the flat xml filter
    1047             :             //for this format
    1048             :             pSfxFlt = SwIoSystem::GetFilterOfFormat(
    1049             :                 OUString( FILTER_XML ),
    1050           0 :                 SwDocShell::Factory().GetFilterContainer() );
    1051             :         }
    1052           0 :         break;
    1053             :         case MM_DOCTYPE_PDF:
    1054             :         {
    1055             :             pSfxFlt = pFilterContainer->GetFilter4FilterName(
    1056             :                 OUString("writer_pdf_Export"),
    1057           0 :                 SFX_FILTER_EXPORT);
    1058             :         }
    1059           0 :         break;
    1060             :         case MM_DOCTYPE_WORD:
    1061             :         {
    1062             :             //the method SwIOSystemGetFilterOfFormat( ) returns the template filter
    1063             :             //because it uses the same user data :-(
    1064           0 :             SfxFilterMatcher aMatcher( pFilterContainer->GetName() );
    1065           0 :             SfxFilterMatcherIter aIter( aMatcher );
    1066           0 :             const SfxFilter* pFilter = aIter.First();
    1067           0 :             while ( pFilter )
    1068             :             {
    1069           0 :                 if( pFilter->GetUserData() == FILTER_WW8 && pFilter->CanExport() )
    1070             :                 {
    1071           0 :                     pSfxFlt = pFilter;
    1072           0 :                     break;
    1073             :                 }
    1074           0 :                 pFilter = aIter.Next();
    1075           0 :             }
    1076             : 
    1077             :         }
    1078           0 :         break;
    1079             :         case MM_DOCTYPE_HTML:
    1080             :         {
    1081           0 :             bAsBody = true;
    1082           0 :             SvxHtmlOptions& rHtmlOptions = SvxHtmlOptions::Get();
    1083           0 :             eEncoding = rHtmlOptions.GetTextEncoding();
    1084             :         }
    1085           0 :         break;
    1086             :         case MM_DOCTYPE_TEXT:
    1087             :         {
    1088           0 :             bAsBody = true;
    1089             :             pSfxFlt = pFilterContainer->GetFilter4FilterName(
    1090           0 :                 OUString("Text (encoded)"), SFX_FILTER_EXPORT);
    1091             :         }
    1092           0 :         break;
    1093             :     }
    1094           0 :     if(!pSfxFlt)
    1095           0 :         pSfxFlt = pFilterContainer->GetFilter4Extension(sExtension, SFX_FILTER_EXPORT);
    1096             : 
    1097           0 :     if(!pSfxFlt)
    1098           0 :         return 0;
    1099           0 :     OUString sMimeType = pSfxFlt->GetMimeType();
    1100             : 
    1101           0 :     if(m_aSubjectED.GetText().isEmpty())
    1102             :     {
    1103           0 :         SwSendQueryBox_Impl aQuery(pButton, m_sNoSubjectQueryST);
    1104           0 :         aQuery.SetIsEmptyTextAllowed(true);
    1105           0 :         aQuery.SetValue(m_sNoSubjectST);
    1106           0 :         if(RET_OK == aQuery.Execute())
    1107             :         {
    1108           0 :             if(aQuery.GetValue() != m_sNoSubjectST)
    1109           0 :                 m_aSubjectED.SetText(aQuery.GetValue());
    1110             :         }
    1111             :         else
    1112           0 :             return 0;
    1113             :     }
    1114           0 :     if(!bAsBody && m_aAttachmentED.GetText().isEmpty())
    1115             :     {
    1116           0 :         SwSendQueryBox_Impl aQuery(pButton, m_sNoAttachmentNameST);
    1117           0 :         aQuery.SetIsEmptyTextAllowed(false);
    1118           0 :         if(RET_OK == aQuery.Execute())
    1119             :         {
    1120           0 :             String sAttach(aQuery.GetValue());
    1121           0 :             xub_StrLen nTokenCount = comphelper::string::getTokenCount(sAttach, '.');
    1122           0 :             if( 2 > nTokenCount)
    1123             :             {
    1124           0 :                 sAttach += '.';
    1125           0 :                 ++nTokenCount;
    1126             :             }
    1127             :             sAttach.SetToken( nTokenCount - 1, '.', lcl_GetExtensionForDocType(
    1128           0 :                      (sal_uLong)m_aSendAsLB.GetEntryData(m_aSendAsLB.GetSelectEntryPos())));
    1129           0 :             m_aAttachmentED.SetText(sAttach);
    1130             :         }
    1131             :         else
    1132           0 :             return 0;
    1133             :     }
    1134           0 :     SfxStringItem aFilterName( SID_FILTER_NAME, pSfxFlt->GetFilterName() );
    1135           0 :     String sEMailColumn = m_aMailToLB.GetSelectEntry();
    1136             :     OSL_ENSURE( sEMailColumn.Len(), "No email column selected");
    1137           0 :     Reference< sdbcx::XColumnsSupplier > xColsSupp( rConfigItem.GetResultSet(), UNO_QUERY);
    1138           0 :     Reference < container::XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : 0;
    1139           0 :     if(!sEMailColumn.Len() || !xColAccess.is() || !xColAccess->hasByName(sEMailColumn))
    1140           0 :         return 0;
    1141             : 
    1142           0 :     String sFilterOptions;
    1143           0 :     if(MM_DOCTYPE_TEXT == nDocType)
    1144             :     {
    1145           0 :         SwAsciiOptions aOpt;
    1146           0 :         sal_uInt16 nAppScriptType = GetI18NScriptTypeOfLanguage( (sal_uInt16)GetAppLanguage() );
    1147           0 :         sal_uInt16 nWhich = GetWhichOfScript( RES_CHRATR_LANGUAGE, nAppScriptType);
    1148           0 :         aOpt.SetLanguage( ((SvxLanguageItem&)pTargetView->GetWrtShell().
    1149           0 :                             GetDefault( nWhich )).GetLanguage());
    1150           0 :         aOpt.SetParaFlags( LINEEND_CR );
    1151           0 :         aOpt.WriteUserData( sFilterOptions );
    1152             :     }
    1153             :     String sTargetTempURL = URIHelper::SmartRel2Abs(
    1154             :         INetURLObject(), utl::TempFile::CreateTempName(),
    1155           0 :         URIHelper::GetMaybeFileHdl());
    1156             :     const SfxFilter *pTargetSfxFlt = SwIoSystem::GetFilterOfFormat(
    1157             :             OUString( FILTER_XML ),
    1158           0 :             SwDocShell::Factory().GetFilterContainer() );
    1159             : 
    1160           0 :     uno::Sequence< beans::PropertyValue > aValues(1);
    1161           0 :     beans::PropertyValue* pValues = aValues.getArray();
    1162           0 :     pValues[0].Name = "FilterName";
    1163           0 :     pValues[0].Value <<= OUString(pTargetSfxFlt->GetFilterName());
    1164             : 
    1165           0 :     uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY);
    1166           0 :     xStore->storeToURL( sTargetTempURL, aValues   );
    1167             : 
    1168             :     //create the send dialog
    1169           0 :     SwSendMailDialog* pDlg = new SwSendMailDialog( pButton, rConfigItem );
    1170           0 :     pDlg->SetDocumentCount( nEnd );
    1171           0 :     pDlg->ShowDialog();
    1172             :     //help to force painting the dialog
    1173             :     //TODO/CLEANUP
    1174             :     //predetermined breaking point
    1175           0 :     for ( sal_Int16 i = 0; i < 25; i++)
    1176           0 :         Application::Reschedule();
    1177           0 :     for(sal_uInt32 nDoc = nBegin; nDoc < nEnd; ++nDoc)
    1178             :     {
    1179           0 :         m_pWizard->EnterWait();
    1180           0 :         SwDocMergeInfo& rInfo = rConfigItem.GetDocumentMergeInfo(nDoc);
    1181             : 
    1182             :         //now extract a document from the target document
    1183             :         // the shell will be closed at the end, but it is more safe to use SfxObjectShellLock here
    1184           0 :         SfxObjectShellLock xTempDocShell( new SwDocShell( SFX_CREATE_MODE_STANDARD ) );
    1185           0 :         xTempDocShell->DoInitNew( 0 );
    1186           0 :         SfxViewFrame* pTempFrame = SfxViewFrame::LoadHiddenDocument( *xTempDocShell, 0 );
    1187           0 :         SwView* pTempView = static_cast<SwView*>( pTempFrame->GetViewShell() );
    1188           0 :         pTargetView->GetWrtShell().StartAction();
    1189           0 :         SwgReaderOption aOpt;
    1190           0 :         aOpt.SetTxtFmts( sal_True );
    1191           0 :         aOpt.SetFrmFmts( sal_True );
    1192           0 :         aOpt.SetPageDescs( sal_True );
    1193           0 :         aOpt.SetNumRules( sal_True );
    1194           0 :         aOpt.SetMerge( sal_False );
    1195             :         pTempView->GetDocShell()->LoadStylesFromFile(
    1196           0 :                 sTargetTempURL, aOpt, sal_True );
    1197           0 :         pTargetView->GetWrtShell().PastePages(pTempView->GetWrtShell(),
    1198           0 :                 (sal_uInt16)rInfo.nStartPageInTarget, (sal_uInt16)rInfo.nEndPageInTarget );
    1199           0 :         pTargetView->GetWrtShell().EndAction();
    1200             : 
    1201             :         //then save it
    1202             :         SfxStringItem aName(SID_FILE_NAME,
    1203             :                 URIHelper::SmartRel2Abs(
    1204             :                     INetURLObject(), utl::TempFile::CreateTempName(0),
    1205           0 :                     URIHelper::GetMaybeFileHdl()) );
    1206             : 
    1207             :         {
    1208           0 :             uno::Sequence< beans::PropertyValue > aFilterValues(MM_DOCTYPE_TEXT == nDocType ? 2 : 1);
    1209           0 :             beans::PropertyValue* pFilterValues = aFilterValues.getArray();
    1210           0 :             pFilterValues[0].Name = "FilterName";
    1211           0 :             pFilterValues[0].Value <<= OUString(pSfxFlt->GetFilterName());
    1212           0 :             if(MM_DOCTYPE_TEXT == nDocType)
    1213             :             {
    1214           0 :                 pFilterValues[1].Name = "FilterOptions";
    1215           0 :                 pFilterValues[1].Value <<= OUString(sFilterOptions);
    1216             :             }
    1217             : 
    1218           0 :             uno::Reference< frame::XStorable > xTempStore( pTempView->GetDocShell()->GetModel(), uno::UNO_QUERY);
    1219           0 :             xTempStore->storeToURL( aName.GetValue(), aFilterValues );
    1220             :         }
    1221           0 :         xTempDocShell->DoClose();
    1222             : 
    1223           0 :         sal_Int32 nTarget = rConfigItem.MoveResultSet(rInfo.nDBRow);
    1224             :         OSL_ENSURE( nTarget == rInfo.nDBRow, "row of current document could not be selected");
    1225             :         (void)nTarget;
    1226             :         OSL_ENSURE( sEMailColumn.Len(), "No email column selected");
    1227           0 :         OUString sEMail = lcl_GetColumnValueOf(sEMailColumn, xColAccess);
    1228           0 :         SwMailDescriptor aDesc;
    1229           0 :         aDesc.sEMail = sEMail;
    1230           0 :         OUString sBody;
    1231           0 :         if(bAsBody)
    1232             :         {
    1233             :             {
    1234             :                 //read in the temporary file and use it as mail body
    1235           0 :                 SfxMedium aMedium( aName.GetValue(),    STREAM_READ);
    1236           0 :                 SvStream* pInStream = aMedium.GetInStream();
    1237           0 :                 if(pInStream)
    1238           0 :                     pInStream->SetStreamCharSet( eEncoding );
    1239             :                 else
    1240             :                 {
    1241             :                     OSL_FAIL("no output file created?");
    1242           0 :                     continue;
    1243             :                 }
    1244           0 :                 OString sLine;
    1245           0 :                 sal_Bool bDone = pInStream->ReadLine( sLine );
    1246           0 :                 while ( bDone )
    1247             :                 {
    1248           0 :                     sBody += OStringToOUString(sLine, eEncoding);
    1249           0 :                     sBody += OUString('\n');
    1250           0 :                     bDone = pInStream->ReadLine( sLine );
    1251           0 :                 }
    1252             :             }
    1253             :             //remove the temporary file
    1254           0 :             SWUnoHelper::UCB_DeleteFile( aName.GetValue() );
    1255             :         }
    1256             :         else
    1257             :         {
    1258           0 :             sBody = m_sBody;
    1259           0 :             aDesc.sAttachmentURL = aName.GetValue();
    1260           0 :             String sAttachment(m_aAttachmentED.GetText());
    1261           0 :             xub_StrLen nTokenCount = comphelper::string::getTokenCount(sAttachment, '.');
    1262           0 :             if( 2 > nTokenCount)
    1263             :             {
    1264           0 :                 sAttachment += '.';
    1265           0 :                 sAttachment.SetToken( nTokenCount, '.', sExtension);
    1266             :             }
    1267           0 :             else if(sAttachment.GetToken( nTokenCount - 1, '.') != sExtension)
    1268           0 :                 sAttachment += sExtension;
    1269           0 :             aDesc.sAttachmentName = sAttachment;
    1270           0 :             aDesc.sMimeType = sMimeType;
    1271             : 
    1272           0 :             if(rConfigItem.IsGreetingLine(sal_True))
    1273             :             {
    1274           0 :                 OUString sNameColumn = rConfigItem.GetAssignedColumn(MM_PART_LASTNAME);
    1275           0 :                 OUString sName = lcl_GetColumnValueOf(sNameColumn, xColAccess);
    1276           0 :                 String sGreeting;
    1277           0 :                 if(!sName.isEmpty() && rConfigItem.IsIndividualGreeting(sal_True))
    1278             :                 {
    1279           0 :                     OUString sGenderColumn = rConfigItem.GetAssignedColumn(MM_PART_GENDER);
    1280           0 :                     const OUString& sFemaleValue = rConfigItem.GetFemaleGenderValue();
    1281           0 :                     OUString sGenderValue = lcl_GetColumnValueOf(sGenderColumn, xColAccess);
    1282           0 :                     SwMailMergeConfigItem::Gender eGenderType = sGenderValue == sFemaleValue ?
    1283             :                         SwMailMergeConfigItem::FEMALE :
    1284           0 :                         SwMailMergeConfigItem::MALE;
    1285             : 
    1286           0 :                     sGreeting = SwAddressPreview::FillData(
    1287             :                         rConfigItem.GetGreetings(eGenderType)
    1288           0 :                         [rConfigItem.GetCurrentGreeting(eGenderType)],
    1289           0 :                             rConfigItem);
    1290             :                 }
    1291             :                 else
    1292             :                 {
    1293             :                     sGreeting =
    1294             :                         rConfigItem.GetGreetings(SwMailMergeConfigItem::NEUTRAL)
    1295           0 :                         [rConfigItem.GetCurrentGreeting(SwMailMergeConfigItem::NEUTRAL)];
    1296             : 
    1297             :                 }
    1298           0 :                 sGreeting += '\n';
    1299           0 :                 OUString sTemp( sGreeting );
    1300           0 :                 sTemp += sBody;
    1301           0 :                 sBody = sTemp;
    1302           0 :             }
    1303             :         }
    1304           0 :         aDesc.sBodyContent = sBody;
    1305           0 :         if(MM_DOCTYPE_HTML == nDocType)
    1306             :         {
    1307           0 :             aDesc.sBodyMimeType = OUString("text/html; charset=");
    1308           0 :             aDesc.sBodyMimeType += OUString::createFromAscii(
    1309           0 :                                 rtl_getBestMimeCharsetFromTextEncoding( eEncoding ));
    1310             :         }
    1311             :         else
    1312           0 :             aDesc.sBodyMimeType =
    1313           0 :                 OUString("text/plain; charset=UTF-8; format=flowed");
    1314             : 
    1315           0 :         aDesc.sSubject = m_aSubjectED.GetText();
    1316           0 :         aDesc.sCC = m_sCC;
    1317           0 :         aDesc.sBCC = m_sBCC;
    1318           0 :         pDlg->AddDocument( aDesc );
    1319             :         //help to force painting the dialog
    1320           0 :         for ( sal_Int16 i = 0; i < 25; i++)
    1321           0 :             Application::Reschedule();
    1322             :         //stop creating of data when dialog has been closed
    1323           0 :         if(!pDlg->IsVisible())
    1324             :         {
    1325           0 :             m_pWizard->LeaveWait();
    1326           0 :             break;
    1327             :         }
    1328           0 :         m_pWizard->LeaveWait();
    1329           0 :     }
    1330           0 :     pDlg->EnableDesctruction();
    1331           0 :     ::osl::File::remove( sTargetTempURL );
    1332             : 
    1333           0 :     m_pWizard->enableButtons(WZB_FINISH, sal_True);
    1334             :     //the dialog deletes itself
    1335             :     //delete pDlg;
    1336           0 :     return 0;
    1337           0 : }
    1338             : 
    1339             : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Generated by: LCOV version 1.10