Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "oox/ole/vbamodule.hxx"
21 : #include <com/sun/star/container/XNameContainer.hpp>
22 : #include <com/sun/star/container/XIndexContainer.hpp>
23 : #include <com/sun/star/script/ModuleInfo.hpp>
24 : #include <com/sun/star/script/ModuleType.hpp>
25 : #include <com/sun/star/script/vba/XVBAModuleInfo.hpp>
26 : #include <com/sun/star/awt/KeyEvent.hpp>
27 : #include <osl/diagnose.h>
28 : #include <cppuhelper/implbase1.hxx>
29 : #include <filter/msfilter/msvbahelper.hxx>
30 : #include "oox/helper/binaryinputstream.hxx"
31 : #include "oox/helper/storagebase.hxx"
32 : #include "oox/helper/textinputstream.hxx"
33 : #include "oox/ole/vbahelper.hxx"
34 : #include "oox/ole/vbainputstream.hxx"
35 :
36 : namespace oox {
37 : namespace ole {
38 :
39 : using namespace ::com::sun::star::lang;
40 : using namespace ::com::sun::star::script::vba;
41 : using namespace ::com::sun::star::uno;
42 : using namespace ::com::sun::star;
43 :
44 : using ::com::sun::star::awt::KeyEvent;
45 :
46 160 : VbaModule::VbaModule( const Reference< XComponentContext >& rxContext,
47 : const Reference< frame::XModel >& rxDocModel,
48 : const OUString& rName, rtl_TextEncoding eTextEnc, bool bExecutable ) :
49 : mxContext( rxContext ),
50 : mxDocModel( rxDocModel ),
51 : maName( rName ),
52 : meTextEnc( eTextEnc ),
53 : mnType( script::ModuleType::UNKNOWN ),
54 : mnOffset( SAL_MAX_UINT32 ),
55 : mbReadOnly( false ),
56 : mbPrivate( false ),
57 160 : mbExecutable( bExecutable )
58 : {
59 160 : }
60 :
61 160 : void VbaModule::importDirRecords( BinaryInputStream& rDirStrm )
62 : {
63 160 : sal_uInt16 nRecId = 0;
64 160 : StreamDataSequence aRecData;
65 1752 : while( VbaHelper::readDirRecord( nRecId, aRecData, rDirStrm ) && (nRecId != VBA_ID_MODULEEND) )
66 : {
67 1432 : SequenceInputStream aRecStrm( aRecData );
68 1432 : sal_Int32 nRecSize = aRecData.getLength();
69 1432 : switch( nRecId )
70 : {
71 : #define OOX_ENSURE_RECORDSIZE( cond ) OSL_ENSURE( cond, "VbaModule::importDirRecords - invalid record size" )
72 : case VBA_ID_MODULENAME:
73 : OSL_FAIL( "VbaModule::importDirRecords - unexpected MODULENAME record" );
74 0 : maName = aRecStrm.readCharArrayUC( nRecSize, meTextEnc );
75 0 : break;
76 : case VBA_ID_MODULENAMEUNICODE:
77 150 : break;
78 : case VBA_ID_MODULESTREAMNAME:
79 160 : maStreamName = aRecStrm.readCharArrayUC( nRecSize, meTextEnc );
80 : // Actually the stream name seems the best name to use
81 : // the VBA_ID_MODULENAME name can sometimes be the wrong case
82 160 : maName = maStreamName;
83 160 : break;
84 : case VBA_ID_MODULESTREAMNAMEUNICODE:
85 160 : break;
86 : case VBA_ID_MODULEDOCSTRING:
87 160 : maDocString = aRecStrm.readCharArrayUC( nRecSize, meTextEnc );
88 160 : break;
89 : case VBA_ID_MODULEDOCSTRINGUNICODE:
90 160 : break;
91 : case VBA_ID_MODULEOFFSET:
92 : OOX_ENSURE_RECORDSIZE( nRecSize == 4 );
93 160 : mnOffset = aRecStrm.readuInt32();
94 160 : break;
95 : case VBA_ID_MODULEHELPCONTEXT:
96 : OOX_ENSURE_RECORDSIZE( nRecSize == 4 );
97 160 : break;
98 : case VBA_ID_MODULECOOKIE:
99 : OOX_ENSURE_RECORDSIZE( nRecSize == 2 );
100 160 : break;
101 : case VBA_ID_MODULETYPEPROCEDURAL:
102 : OOX_ENSURE_RECORDSIZE( nRecSize == 0 );
103 : OSL_ENSURE( mnType == script::ModuleType::UNKNOWN, "VbaModule::importDirRecords - multiple module type records" );
104 30 : mnType = script::ModuleType::NORMAL;
105 30 : break;
106 : case VBA_ID_MODULETYPEDOCUMENT:
107 : OOX_ENSURE_RECORDSIZE( nRecSize == 0 );
108 : OSL_ENSURE( mnType == script::ModuleType::UNKNOWN, "VbaModule::importDirRecords - multiple module type records" );
109 130 : mnType = script::ModuleType::DOCUMENT;
110 130 : break;
111 : case VBA_ID_MODULEREADONLY:
112 : OOX_ENSURE_RECORDSIZE( nRecSize == 0 );
113 0 : mbReadOnly = true;
114 0 : break;
115 : case VBA_ID_MODULEPRIVATE:
116 : OOX_ENSURE_RECORDSIZE( nRecSize == 0 );
117 2 : mbPrivate = true;
118 2 : break;
119 : default:
120 : OSL_FAIL( "VbaModule::importDirRecords - unknown module record" );
121 : #undef OOX_ENSURE_RECORDSIZE
122 : }
123 1432 : }
124 : OSL_ENSURE( !maName.isEmpty(), "VbaModule::importDirRecords - missing module name" );
125 : OSL_ENSURE( !maStreamName.isEmpty(), "VbaModule::importDirRecords - missing module stream name" );
126 : OSL_ENSURE( mnType != script::ModuleType::UNKNOWN, "VbaModule::importDirRecords - missing module type" );
127 160 : OSL_ENSURE( mnOffset < SAL_MAX_UINT32, "VbaModule::importDirRecords - missing module stream offset" );
128 160 : }
129 :
130 160 : void VbaModule::createAndImportModule( StorageBase& rVbaStrg,
131 : const Reference< container::XNameContainer >& rxBasicLib,
132 : const Reference< container::XNameAccess >& rxDocObjectNA ) const
133 : {
134 160 : OUString aVBASourceCode = readSourceCode( rVbaStrg );
135 160 : createModule( aVBASourceCode, rxBasicLib, rxDocObjectNA );
136 160 : }
137 :
138 0 : void VbaModule::createEmptyModule( const Reference< container::XNameContainer >& rxBasicLib,
139 : const Reference< container::XNameAccess >& rxDocObjectNA ) const
140 : {
141 0 : createModule( OUString(), rxBasicLib, rxDocObjectNA );
142 0 : }
143 :
144 160 : OUString VbaModule::readSourceCode( StorageBase& rVbaStrg ) const
145 : {
146 160 : OUStringBuffer aSourceCode;
147 : static const char sUnmatchedRemovedTag[] = "Rem removed unmatched Sub/End: ";
148 160 : if( !maStreamName.isEmpty() && (mnOffset != SAL_MAX_UINT32) )
149 : {
150 160 : BinaryXInputStream aInStrm( rVbaStrg.openInputStream( maStreamName ), true );
151 : OSL_ENSURE( !aInStrm.isEof(), "VbaModule::readSourceCode - cannot open module stream" );
152 : // skip the 'performance cache' stored before the actual source code
153 160 : aInStrm.seek( mnOffset );
154 : // if stream is still valid, load the source code
155 160 : if( !aInStrm.isEof() )
156 : {
157 : // decompression starts at current stream position of aInStrm
158 160 : VbaInputStream aVbaStrm( aInStrm );
159 : // load the source code line-by-line, with some more processing
160 320 : TextInputStream aVbaTextStrm( mxContext, aVbaStrm, meTextEnc );
161 :
162 : struct ProcedurePair
163 : {
164 : bool bInProcedure;
165 : sal_uInt32 nPos;
166 160 : ProcedurePair() : bInProcedure( false ), nPos( 0 ) {};
167 160 : } procInfo;
168 :
169 7381 : while( !aVbaTextStrm.isEof() )
170 : {
171 7061 : OUString aCodeLine = aVbaTextStrm.readLine();
172 7061 : if( aCodeLine.match( "Attribute " ) )
173 : {
174 : // attribute
175 1091 : int index = aCodeLine.indexOf( ".VB_ProcData.VB_Invoke_Func = " );
176 1091 : if ( index != -1 )
177 : {
178 : // format is
179 : // 'Attribute Procedure.VB_ProcData.VB_Invoke_Func = "*\n14"'
180 : // where 'Procedure' is the procedure name and '*' is the shortcut key
181 : // note: his is only relevant for Excel, seems that
182 : // word doesn't store the shortcut in the module
183 : // attributes
184 1 : int nSpaceIndex = aCodeLine.indexOf(' ');
185 1 : OUString sProc = aCodeLine.copy( nSpaceIndex + 1, index - nSpaceIndex - 1);
186 : // for Excel short cut key seems limited to cntrl+'a-z, A-Z'
187 2 : OUString sKey = aCodeLine.copy( aCodeLine.lastIndexOf("= ") + 3, 1 );
188 : // only alpha key valid for key shortcut, however the api will accept other keys
189 1 : if ( !isalpha( (char)sKey[ 0 ] ) )
190 : {
191 : // cntrl modifier is explicit ( but could be cntrl+shift ), parseKeyEvent
192 : // will handle and uppercase letter appropriately
193 0 : OUString sApiKey = "^";
194 0 : sApiKey += sKey;
195 : try
196 : {
197 0 : KeyEvent aKeyEvent = ooo::vba::parseKeyEvent( sApiKey );
198 0 : ooo::vba::applyShortCutKeyBinding( mxDocModel, aKeyEvent, sProc );
199 : }
200 0 : catch (const Exception&)
201 : {
202 0 : }
203 1 : }
204 : }
205 : }
206 : else
207 : {
208 : // Hack here to weed out any unmatched End Sub / Sub Foo statements.
209 : // The behaviour of the vba ide practically guarantees the case and
210 : // spacing of Sub statement(s). However, indentation can be arbitrary hence
211 : // the trim.
212 5970 : OUString trimLine( aCodeLine.trim() );
213 12141 : if ( mbExecutable && (
214 11776 : trimLine.match("Sub ") ||
215 11611 : trimLine.match("Public Sub ") ||
216 11574 : trimLine.match("Private Sub ") ||
217 5769 : trimLine.match("Static Sub ") ) )
218 : {
219 : // this should never happen, basic doesn't support nested procedures
220 : // first Sub Foo must be bogus
221 201 : if ( procInfo.bInProcedure )
222 : {
223 : // comment out the line
224 0 : aSourceCode.insert( procInfo.nPos, sUnmatchedRemovedTag );
225 : // mark location of this Sub
226 0 : procInfo.nPos = aSourceCode.getLength();
227 : }
228 : else
229 : {
230 201 : procInfo.bInProcedure = true;
231 201 : procInfo.nPos = aSourceCode.getLength();
232 : }
233 : }
234 5769 : else if ( mbExecutable && aCodeLine.trim().match("End Sub") )
235 : {
236 : // un-matched End Sub
237 201 : if ( !procInfo.bInProcedure )
238 : {
239 0 : aSourceCode.append( sUnmatchedRemovedTag );
240 : }
241 : else
242 : {
243 201 : procInfo.bInProcedure = false;
244 201 : procInfo.nPos = 0;
245 : }
246 : }
247 : // normal source code line
248 5970 : if( !mbExecutable )
249 0 : aSourceCode.appendAscii( "Rem " );
250 5970 : aSourceCode.append( aCodeLine ).append( '\n' );
251 : }
252 7221 : }
253 160 : }
254 : }
255 160 : return aSourceCode.makeStringAndClear();
256 : }
257 :
258 160 : void VbaModule::createModule( const OUString& rVBASourceCode,
259 : const Reference< container::XNameContainer >& rxBasicLib,
260 : const Reference< container::XNameAccess >& rxDocObjectNA ) const
261 : {
262 160 : if( maName.isEmpty() )
263 160 : return;
264 :
265 : // prepare the Basic module
266 160 : script::ModuleInfo aModuleInfo;
267 160 : aModuleInfo.ModuleType = mnType;
268 320 : OUStringBuffer aSourceCode;
269 160 : aSourceCode.appendAscii( "Rem Attribute VBA_ModuleType=" );
270 160 : switch( mnType )
271 : {
272 : case script::ModuleType::NORMAL:
273 30 : aSourceCode.appendAscii( "VBAModule" );
274 30 : break;
275 : case script::ModuleType::CLASS:
276 0 : aSourceCode.appendAscii( "VBAClassModule" );
277 0 : break;
278 : case script::ModuleType::FORM:
279 2 : aSourceCode.appendAscii( "VBAFormModule" );
280 : // hack from old filter, document Basic should know the XModel, but it doesn't
281 2 : aModuleInfo.ModuleObject.set( mxDocModel, UNO_QUERY );
282 2 : break;
283 : case script::ModuleType::DOCUMENT:
284 128 : aSourceCode.appendAscii( "VBADocumentModule" );
285 : // get the VBA implementation object associated to the document module
286 128 : if( rxDocObjectNA.is() ) try
287 : {
288 108 : aModuleInfo.ModuleObject.set( rxDocObjectNA->getByName( maName ), UNO_QUERY );
289 : }
290 0 : catch (const Exception&)
291 : {
292 : }
293 128 : break;
294 : default:
295 0 : aSourceCode.appendAscii( "VBAUnknown" );
296 : }
297 160 : aSourceCode.append( '\n' );
298 160 : if( mbExecutable )
299 : {
300 160 : aSourceCode.appendAscii( "Option VBASupport 1\n" );
301 160 : if( mnType == script::ModuleType::CLASS )
302 0 : aSourceCode.appendAscii( "Option ClassModule\n" );
303 : }
304 : else
305 : {
306 : // add a subroutine named after the module itself
307 0 : aSourceCode.appendAscii( "Sub " ).
308 0 : append( maName.replace( ' ', '_' ) ).append( '\n' );
309 : }
310 :
311 : // append passed VBA source code
312 160 : aSourceCode.append( rVBASourceCode );
313 :
314 : // close the subroutine named after the module
315 160 : if( !mbExecutable )
316 0 : aSourceCode.appendAscii( "End Sub\n" );
317 :
318 : // insert extended module info
319 : try
320 : {
321 160 : Reference< XVBAModuleInfo > xVBAModuleInfo( rxBasicLib, UNO_QUERY_THROW );
322 160 : xVBAModuleInfo->insertModuleInfo( maName, aModuleInfo );
323 : }
324 0 : catch (const Exception&)
325 : {
326 : }
327 :
328 : // insert the module into the passed Basic library
329 : try
330 : {
331 160 : rxBasicLib->insertByName( maName, Any( aSourceCode.makeStringAndClear() ) );
332 : }
333 0 : catch (const Exception&)
334 : {
335 : OSL_FAIL( "VbaModule::createModule - cannot insert module into library" );
336 160 : }
337 : }
338 :
339 : } // namespace ole
340 246 : } // namespace oox
341 :
342 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
