Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #ifndef INCLUDED_SD_SOURCE_UI_INC_DRAWDOCSHELL_HXX
21 : #define INCLUDED_SD_SOURCE_UI_INC_DRAWDOCSHELL_HXX
22 :
23 : #include <sfx2/docfac.hxx>
24 : #include <sfx2/objsh.hxx>
25 :
26 : #include <vcl/jobset.hxx>
27 : #include "glob.hxx"
28 : #include "sdmod.hxx"
29 : #include "pres.hxx"
30 : #include "sddllapi.h"
31 : #include "fupoor.hxx"
32 :
33 : class SfxStyleSheetBasePool;
34 : class FontList;
35 : class SdDrawDocument;
36 : class SdPage;
37 : class SfxPrinter;
38 : struct SpellCallbackInfo;
39 : class AbstractSvxNameDialog;
40 : class SfxUndoManager;
41 :
42 : namespace sd {
43 :
44 : class FrameView;
45 : class ViewShell;
46 : class DrawViewShell;
47 :
48 : // DrawDocShell
49 : class SD_DLLPUBLIC DrawDocShell : public SfxObjectShell
50 : {
51 : public:
52 : TYPEINFO_OVERRIDE();
53 21 : SFX_DECL_INTERFACE(SD_IF_SDDRAWDOCSHELL)
54 10791 : SFX_DECL_OBJECTFACTORY();
55 :
56 : private:
57 : /// SfxInterface initializer.
58 : static void InitInterface_Impl();
59 :
60 : public:
61 : DrawDocShell (
62 : SfxObjectCreateMode eMode = SfxObjectCreateMode::EMBEDDED,
63 : bool bSdDataObj=false,
64 : DocumentType=DOCUMENT_TYPE_IMPRESS);
65 :
66 : DrawDocShell (
67 : SfxModelFlags nModelCreationFlags,
68 : bool bSdDataObj=false,
69 : DocumentType=DOCUMENT_TYPE_IMPRESS);
70 :
71 : DrawDocShell (
72 : SdDrawDocument* pDoc,
73 : SfxObjectCreateMode eMode = SfxObjectCreateMode::EMBEDDED,
74 : bool bSdDataObj=false,
75 : DocumentType=DOCUMENT_TYPE_IMPRESS);
76 : virtual ~DrawDocShell();
77 :
78 : void UpdateRefDevice();
79 : virtual void Activate( bool bMDI ) SAL_OVERRIDE;
80 : virtual void Deactivate( bool bMDI ) SAL_OVERRIDE;
81 : virtual bool InitNew( const ::com::sun::star::uno::Reference< ::com::sun::star::embed::XStorage >& xStorage ) SAL_OVERRIDE;
82 : virtual bool ImportFrom(SfxMedium &rMedium,
83 : css::uno::Reference<css::text::XTextRange> const& xInsertPosition)
84 : SAL_OVERRIDE;
85 : virtual bool ConvertFrom( SfxMedium &rMedium ) SAL_OVERRIDE;
86 : virtual bool Save() SAL_OVERRIDE;
87 : virtual bool SaveAsOwnFormat( SfxMedium& rMedium ) SAL_OVERRIDE;
88 : virtual bool ConvertTo( SfxMedium &rMedium ) SAL_OVERRIDE;
89 : virtual bool SaveCompleted( const ::com::sun::star::uno::Reference< ::com::sun::star::embed::XStorage >& xStorage ) SAL_OVERRIDE;
90 :
91 : virtual bool Load( SfxMedium &rMedium ) SAL_OVERRIDE;
92 : virtual bool LoadFrom( SfxMedium& rMedium ) SAL_OVERRIDE;
93 : virtual bool SaveAs( SfxMedium &rMedium ) SAL_OVERRIDE;
94 :
95 : virtual Rectangle GetVisArea(sal_uInt16 nAspect) const SAL_OVERRIDE;
96 : virtual void Draw(OutputDevice*, const JobSetup& rSetup, sal_uInt16 nAspect = ASPECT_CONTENT) SAL_OVERRIDE;
97 : virtual ::svl::IUndoManager*
98 : GetUndoManager() SAL_OVERRIDE;
99 : virtual Printer* GetDocumentPrinter() SAL_OVERRIDE;
100 : virtual void OnDocumentPrinterChanged(Printer* pNewPrinter) SAL_OVERRIDE;
101 : virtual SfxStyleSheetBasePool* GetStyleSheetPool() SAL_OVERRIDE;
102 : virtual Size GetFirstPageSize() SAL_OVERRIDE;
103 : virtual void FillClass(SvGlobalName* pClassName, SotClipboardFormatId* pFormat, OUString* pAppName, OUString* pFullTypeName, OUString* pShortTypeName, sal_Int32 nFileFormat, bool bTemplate = false ) const SAL_OVERRIDE;
104 : virtual void SetModified( bool = true ) SAL_OVERRIDE;
105 : virtual VclPtr<SfxDocumentInfoDialog> CreateDocumentInfoDialog( vcl::Window *pParent,
106 : const SfxItemSet &rSet ) SAL_OVERRIDE;
107 :
108 : using SfxObjectShell::GetVisArea;
109 : using SfxShell::GetViewShell;
110 :
111 9420 : sd::ViewShell* GetViewShell() { return mpViewShell; }
112 : ::sd::FrameView* GetFrameView();
113 4 : rtl::Reference<FuPoor> GetDocShellFunction() const { return mxDocShellFunction; }
114 : void SetDocShellFunction( const rtl::Reference<FuPoor>& xFunction );
115 :
116 3962 : SdDrawDocument* GetDoc() { return mpDoc;}
117 224 : DocumentType GetDocumentType() const { return meDocType; }
118 :
119 : SfxPrinter* GetPrinter(bool bCreate);
120 : void SetPrinter(SfxPrinter *pNewPrinter);
121 : void UpdateFontList();
122 :
123 131 : bool IsInDestruction() const { return mbInDestruction; }
124 :
125 : void CancelSearching();
126 :
127 : void Execute( SfxRequest& rReq );
128 : void GetState(SfxItemSet&);
129 :
130 : void Connect(sd::ViewShell* pViewSh);
131 : void Disconnect(sd::ViewShell* pViewSh);
132 : void UpdateTablePointers();
133 :
134 : bool GotoBookmark(const OUString& rBookmark);
135 :
136 : //realize multi-selection of objects
137 : bool GotoTreeBookmark(const OUString& rBookmark);
138 : bool IsMarked( SdrObject* pObject );
139 : bool GetObjectIsmarked(const OUString& rBookmark);
140 : Bitmap GetPagePreviewBitmap(SdPage* pPage, sal_uInt16 nMaxEdgePixel);
141 :
142 : /** checks, if the given name is a valid new name for a slide
143 :
144 : <p>If the name is invalid, an <type>SvxNameDialog</type> pops up that
145 : queries again for a new name until it is ok or the user chose
146 : Cancel.</p>
147 :
148 : @param pWin is necessary to pass to the <type>SvxNameDialog</type> in
149 : case an invalid name was entered.
150 : @param rName the new name that is to be set for a slide. This string
151 : may be set to an empty string (see below).
152 :
153 : @return sal_True, if the new name is unique. Note that if the user entered
154 : a default name of a not-yet-existing slide (e.g. 'Slide 17'),
155 : sal_True is returned, but rName is set to an empty string.
156 : */
157 : bool CheckPageName(vcl::Window* pWin, OUString& rName );
158 :
159 318 : void SetSlotFilter(bool bEnable = false, sal_uInt16 nCount = 0, const sal_uInt16* pSIDs = NULL) { mbFilterEnable = bEnable; mnFilterCount = nCount; mpFilterSIDs = pSIDs; }
160 : void ApplySlotFilter() const;
161 :
162 0 : sal_uInt16 GetStyleFamily() const { return mnStyleFamily; }
163 410 : void SetStyleFamily( sal_uInt16 nSF ) { mnStyleFamily = nSF; }
164 :
165 : /** executes the SID_OPENDOC slot to let the framework open a document
166 : with the given URL and this document as a referer */
167 : void OpenBookmark( const OUString& rBookmarkURL );
168 :
169 : /** checks, if the given name is a valid new name for a slide
170 :
171 : <p>This method does not pop up any dialog (like CheckPageName).</p>
172 :
173 : @param rInOutPageName the new name for a slide that is to be renamed.
174 : This string will be set to an empty string if
175 : bResetStringIfStandardName is true and the name is of the
176 : form of any, possibly not-yet existing, standard slide
177 : (e.g. 'Slide 17')
178 :
179 : @param bResetStringIfStandardName if true allows setting rInOutPageName
180 : to an empty string, which returns true and implies that the
181 : slide will later on get a new standard name (with a free
182 : slide number).
183 :
184 : @return true, if the new name is unique. If bResetStringIfStandardName
185 : is true, the return value is also true, if the slide name is
186 : a standard name (see above)
187 : */
188 : bool IsNewPageNameValid( OUString & rInOutPageName, bool bResetStringIfStandardName = false );
189 :
190 : /** Return the reference device for the current document. When the
191 : inherited implementation returns a device then this is passed to the
192 : caller. Otherwise the returned value depends on the printer
193 : independent layout mode and will usually be either a printer or a
194 : virtual device used for screen rendering.
195 : @return
196 : Returns NULL when the current document has no reference device.
197 : */
198 : virtual OutputDevice* GetDocumentRefDev() SAL_OVERRIDE;
199 :
200 : DECL_LINK( RenameSlideHdl, AbstractSvxNameDialog* );
201 :
202 : // ExecuteSpellPopup now handled by DrawDocShell
203 : DECL_LINK( OnlineSpellCallback, SpellCallbackInfo* );
204 :
205 : void ClearUndoBuffer();
206 :
207 : virtual void libreOfficeKitCallback(int nType, const char* pPayload) const SAL_OVERRIDE;
208 : virtual bool isTiledRendering() const SAL_OVERRIDE;
209 :
210 : protected:
211 :
212 : SdDrawDocument* mpDoc;
213 : SfxUndoManager* mpUndoManager;
214 : VclPtr<SfxPrinter> mpPrinter;
215 : ::sd::ViewShell* mpViewShell;
216 : FontList* mpFontList;
217 : rtl::Reference<FuPoor> mxDocShellFunction;
218 : DocumentType meDocType;
219 : sal_uInt16 mnStyleFamily;
220 : const sal_uInt16* mpFilterSIDs;
221 : sal_uInt16 mnFilterCount;
222 : bool mbFilterEnable;
223 : bool mbSdDataObj;
224 : bool mbInDestruction;
225 : bool mbOwnPrinter;
226 : bool mbNewDocument;
227 :
228 : bool mbOwnDocument; // if true, we own mpDoc and will delete it in our d'tor
229 : void Construct(bool bClipboard);
230 : virtual void InPlaceActivate( bool bActive ) SAL_OVERRIDE;
231 : private:
232 : static void setEditMode(DrawViewShell* pDrawViewShell, bool isMasterPage);
233 : };
234 :
235 : #ifndef SV_DECL_DRAW_DOC_SHELL_DEFINED
236 : #define SV_DECL_DRAW_DOC_SHELL_DEFINED
237 : typedef ::tools::SvRef<DrawDocShell> DrawDocShellRef;
238 : #endif
239 :
240 : } // end of namespace sd
241 :
242 : #endif
243 :
244 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
