Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 :
21 : #include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
22 : #include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
23 : #include <com/sun/star/drawing/ShadeMode.hpp>
24 : #include <com/sun/star/drawing/Position3D.hpp>
25 : #include <com/sun/star/drawing/Direction3D.hpp>
26 : #include <com/sun/star/drawing/ProjectionMode.hpp>
27 : #include <svx/svdundo.hxx>
28 : #include <sfx2/app.hxx>
29 : #include <sfx2/request.hxx>
30 : #include <sfx2/objface.hxx>
31 : #include <sfx2/viewsh.hxx>
32 : #include <sfx2/bindings.hxx>
33 : #include <svx/xsflclit.hxx>
34 : #include <svx/dialmgr.hxx>
35 : #include <svx/svdoashp.hxx>
36 : #include <svx/dialogs.hrc>
37 : #include <svx/svdview.hxx>
38 : #include <editeng/colritem.hxx>
39 : #include "svx/chrtitem.hxx"
40 :
41 : #include <svx/extrusionbar.hxx>
42 : #include "extrusiondepthdialog.hxx"
43 :
44 : using namespace ::svx;
45 : using namespace ::cppu;
46 : using namespace ::com::sun::star::beans;
47 : using namespace ::com::sun::star::drawing;
48 : using namespace ::com::sun::star::uno;
49 :
50 : // Standardinterface deklarieren (Die Slotmap darf nicht leer sein, also
51 : // tragen wir etwas ein, was hier (hoffentlich) nie vorkommt).
52 : static SfxSlot aExtrusionBarSlots_Impl[] =
53 : {
54 : { 0, 0, 0, SfxSlotMode::NONE, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
55 : };
56 :
57 342 : SFX_IMPL_INTERFACE(ExtrusionBar, SfxShell)
58 :
59 114 : void ExtrusionBar::InitInterface_Impl()
60 : {
61 114 : GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, RID_SVX_EXTRUSION_BAR);
62 114 : }
63 :
64 48 : TYPEINIT1( ExtrusionBar, SfxShell );
65 :
66 0 : ExtrusionBar::ExtrusionBar(SfxViewShell* pViewShell )
67 0 : : SfxShell(pViewShell)
68 : {
69 : DBG_ASSERT( pViewShell, "svx::ExtrusionBar::ExtrusionBar(), I need a viewshell!" );
70 0 : if( pViewShell )
71 0 : SetPool(&pViewShell->GetPool());
72 :
73 0 : SetHelpId( SVX_INTERFACE_EXTRUSION_BAR );
74 0 : SetName(SVX_RESSTR(RID_SVX_EXTRUSION_BAR));
75 0 : }
76 :
77 0 : ExtrusionBar::~ExtrusionBar()
78 : {
79 0 : SetRepeatTarget(NULL);
80 0 : }
81 :
82 0 : void getLightingDirectionDefaults( const Direction3D **pLighting1Defaults, const Direction3D **pLighting2Defaults )
83 : {
84 :
85 : static const Direction3D aLighting1Defaults[9] =
86 : {
87 : Direction3D( -50000, -50000, 10000 ),
88 : Direction3D( 0, -50000, 10000 ),
89 : Direction3D( 50000, -50000, 10000 ),
90 : Direction3D( -50000, 0, 10000 ),
91 : Direction3D( 0, 0, 10000 ),
92 : Direction3D( 50000, 0, 10000 ),
93 : Direction3D( -50000, 50000, 10000 ),
94 : Direction3D( 0, 50000, 10000 ),
95 : Direction3D( 50000, 50000, 10000 )
96 0 : };
97 :
98 : static const Direction3D aLighting2Defaults[9] =
99 : {
100 : Direction3D( 50000,0, 10000 ),
101 : Direction3D( 0, 50000, 10000 ),
102 : Direction3D( -50000, 0, 10000 ),
103 : Direction3D( 50000, 0, 10000 ),
104 : Direction3D( 0, 0, 10000 ),
105 : Direction3D( -50000, 0, 10000 ),
106 : Direction3D( 50000, 0, 10000 ),
107 : Direction3D( 0, -50000, 10000 ),
108 : Direction3D( -50000, 0, 10000 )
109 0 : };
110 :
111 0 : *pLighting1Defaults = aLighting1Defaults;
112 0 : *pLighting2Defaults = aLighting2Defaults;
113 0 : };
114 :
115 0 : static void impl_execute( SdrView*, SfxRequest& rReq, SdrCustomShapeGeometryItem& rGeometryItem, SdrObject* pObj )
116 : {
117 : static const char sExtrusion[] = "Extrusion";
118 : static const char sProjectionMode[] = "ProjectionMode";
119 : static const char sRotateAngle[] = "RotateAngle";
120 : static const char sViewPoint[] = "ViewPoint";
121 : static const char sOrigin[] = "Origin";
122 : static const char sSkew[] = "Skew";
123 : static const char sDepth[] = "Depth";
124 :
125 0 : sal_uInt16 nSID = rReq.GetSlot();
126 0 : switch( nSID )
127 : {
128 : case SID_EXTRUSION_TOOGLE:
129 : {
130 0 : com::sun::star::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
131 :
132 0 : if( pAny )
133 : {
134 0 : bool bOn(false);
135 0 : (*pAny) >>= bOn;
136 0 : bOn = !bOn;
137 0 : (*pAny) <<= bOn;
138 : }
139 : else
140 : {
141 0 : com::sun::star::beans::PropertyValue aPropValue;
142 0 : aPropValue.Name = sExtrusion;
143 0 : aPropValue.Value <<= sal_True;
144 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
145 : }
146 : }
147 0 : break;
148 :
149 : case SID_EXTRUSION_TILT_DOWN:
150 : case SID_EXTRUSION_TILT_UP:
151 : case SID_EXTRUSION_TILT_LEFT:
152 : case SID_EXTRUSION_TILT_RIGHT:
153 : {
154 0 : bool bHorizontal = ( nSID == SID_EXTRUSION_TILT_DOWN ) || ( nSID == SID_EXTRUSION_TILT_UP );
155 0 : sal_Int32 nDiff = ( nSID == SID_EXTRUSION_TILT_LEFT ) || ( nSID == SID_EXTRUSION_TILT_UP ) ? 5 : -5;
156 0 : EnhancedCustomShapeParameterPair aRotateAnglePropPair;
157 0 : double fX = 0.0;
158 0 : double fY = 0.0;
159 0 : aRotateAnglePropPair.First.Value <<= fX;
160 0 : aRotateAnglePropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
161 0 : aRotateAnglePropPair.Second.Value <<= fY;
162 0 : aRotateAnglePropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
163 0 : com::sun::star::uno::Any* pAny = rGeometryItem.GetPropertyValueByName( sExtrusion, sRotateAngle );
164 0 : if( pAny && ( *pAny >>= aRotateAnglePropPair ) )
165 : {
166 0 : aRotateAnglePropPair.First.Value >>= fX;
167 0 : aRotateAnglePropPair.Second.Value >>= fY;
168 : }
169 0 : if ( bHorizontal )
170 0 : fX += nDiff;
171 : else
172 0 : fY += nDiff;
173 0 : aRotateAnglePropPair.First.Value <<= fX;
174 0 : aRotateAnglePropPair.Second.Value <<= fY;
175 0 : com::sun::star::beans::PropertyValue aPropValue;
176 0 : aPropValue.Name = sRotateAngle;
177 0 : aPropValue.Value <<= aRotateAnglePropPair;
178 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
179 : }
180 0 : break;
181 :
182 : case SID_EXTRUSION_DIRECTION:
183 : {
184 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DIRECTION ) == SfxItemState::SET )
185 : {
186 0 : sal_Int32 nSkew = static_cast<const SfxInt32Item*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_DIRECTION))->GetValue();
187 :
188 0 : Position3D aViewPoint( 3472, -3472, 25000 );
189 0 : double fOriginX = 0.50;
190 0 : double fOriginY = -0.50;
191 0 : double fSkewAngle = nSkew;
192 0 : double fSkew = 50.0;
193 :
194 0 : switch( nSkew )
195 : {
196 : case 135:
197 0 : aViewPoint.PositionY = 3472;
198 0 : fOriginY = 0.50;
199 0 : break;
200 : case 90:
201 0 : aViewPoint.PositionX = 0;
202 0 : aViewPoint.PositionY = 3472;
203 0 : fOriginX = 0;
204 0 : fOriginY = -0.50;
205 0 : break;
206 : case 45:
207 0 : aViewPoint.PositionX = -3472;
208 0 : aViewPoint.PositionY = 3472;
209 0 : fOriginX = -0.50;
210 0 : fOriginY = 0.50;
211 0 : break;
212 : case 180:
213 0 : aViewPoint.PositionY = 0;
214 0 : fOriginY = 0;
215 0 : break;
216 : case 0:
217 0 : aViewPoint.PositionX = 0;
218 0 : aViewPoint.PositionY = 0;
219 0 : fOriginX = 0;
220 0 : fOriginY = 0;
221 0 : fSkew = 0.0;
222 0 : break;
223 : case -360:
224 0 : aViewPoint.PositionX = -3472;
225 0 : aViewPoint.PositionY = 0;
226 0 : fOriginX = -0.50;
227 0 : fOriginY = 0;
228 0 : break;
229 : case -90:
230 0 : aViewPoint.PositionX = 0;
231 0 : fOriginX = 0;
232 0 : break;
233 : case -45:
234 0 : aViewPoint.PositionX = -3472;
235 0 : fOriginX = -0.50;
236 0 : break;
237 : }
238 :
239 0 : com::sun::star::beans::PropertyValue aPropValue;
240 :
241 0 : aPropValue.Name = sViewPoint;
242 0 : aPropValue.Value <<= aViewPoint;
243 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
244 :
245 :
246 0 : EnhancedCustomShapeParameterPair aOriginPropPair;
247 0 : aOriginPropPair.First.Value <<= fOriginX;
248 0 : aOriginPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
249 0 : aOriginPropPair.Second.Value <<= fOriginY;
250 0 : aOriginPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
251 0 : aPropValue.Name = sOrigin;
252 0 : aPropValue.Value <<= aOriginPropPair;
253 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
254 :
255 0 : EnhancedCustomShapeParameterPair aSkewPropPair;
256 0 : aSkewPropPair.First.Value <<= fSkew;
257 0 : aSkewPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
258 0 : aSkewPropPair.Second.Value <<= fSkewAngle;
259 0 : aSkewPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
260 0 : aPropValue.Name = sSkew;
261 0 : aPropValue.Value <<= aSkewPropPair;
262 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
263 : }
264 : }
265 0 : break;
266 : case SID_EXTRUSION_PROJECTION:
267 : {
268 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_PROJECTION ) == SfxItemState::SET )
269 : {
270 0 : sal_Int32 nProjection = static_cast<const SfxInt32Item*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_PROJECTION))->GetValue();
271 0 : ProjectionMode eProjectionMode = nProjection == 1 ? ProjectionMode_PARALLEL : ProjectionMode_PERSPECTIVE;
272 0 : com::sun::star::beans::PropertyValue aPropValue;
273 0 : aPropValue.Name = sProjectionMode;
274 0 : aPropValue.Value <<= eProjectionMode;
275 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
276 : }
277 : }
278 0 : break;
279 : case SID_EXTRUSION_DEPTH:
280 : {
281 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET)
282 : {
283 0 : double fDepth = static_cast<const SvxDoubleItem*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_DEPTH))->GetValue();
284 0 : double fFraction = 0.0;
285 0 : EnhancedCustomShapeParameterPair aDepthPropPair;
286 0 : aDepthPropPair.First.Value <<= fDepth;
287 0 : aDepthPropPair.First.Type = EnhancedCustomShapeParameterType::NORMAL;
288 0 : aDepthPropPair.Second.Value <<= fFraction;
289 0 : aDepthPropPair.Second.Type = EnhancedCustomShapeParameterType::NORMAL;
290 :
291 0 : com::sun::star::beans::PropertyValue aPropValue;
292 0 : aPropValue.Name = sDepth;
293 0 : aPropValue.Value <<= aDepthPropPair;
294 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
295 : }
296 : }
297 0 : break;
298 : case SID_EXTRUSION_3D_COLOR:
299 : {
300 : static const char sExtrusionColor[] = "Color";
301 :
302 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_3D_COLOR ) == SfxItemState::SET)
303 : {
304 0 : Color aColor( static_cast<const SvxColorItem&>(rReq.GetArgs()->Get(SID_EXTRUSION_3D_COLOR)).GetValue() );
305 :
306 0 : const bool bAuto = aColor == COL_AUTO;
307 :
308 0 : com::sun::star::beans::PropertyValue aPropValue;
309 0 : aPropValue.Name = sExtrusionColor;
310 0 : aPropValue.Value <<= bAuto ? sal_False : sal_True;
311 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
312 :
313 0 : if( bAuto )
314 : {
315 0 : pObj->ClearMergedItem( XATTR_SECONDARYFILLCOLOR );
316 : }
317 : else
318 : {
319 0 : pObj->SetMergedItem( XSecondaryFillColorItem( "", aColor ) );
320 : }
321 0 : pObj->BroadcastObjectChange();
322 : }
323 : }
324 0 : break;
325 : case SID_EXTRUSION_SURFACE:
326 : {
327 : static const char sShadeMode[] = "ShadeMode";
328 : static const char sSpecularity[] = "Specularity";
329 : static const char sDiffusion[] = "Diffusion";
330 : static const char sMetal[] = "Metal";
331 :
332 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_SURFACE ) == SfxItemState::SET)
333 : {
334 0 : sal_Int32 nSurface = static_cast<const SfxInt32Item*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_SURFACE))->GetValue();
335 :
336 0 : ShadeMode eShadeMode( ShadeMode_FLAT );
337 0 : bool bMetal = false;
338 0 : double fSpecularity = 0;
339 0 : double fDiffusion = 0;
340 :
341 0 : switch( nSurface )
342 : {
343 : case 0: // wireframe
344 0 : eShadeMode = ShadeMode_DRAFT;
345 0 : break;
346 : case 1: // matte
347 0 : break;
348 : case 2: // plastic
349 0 : fSpecularity = 122.0;
350 0 : break;
351 : case 3: // metal
352 0 : bMetal = true;
353 0 : fSpecularity = 122.0;
354 0 : fDiffusion = 122.0;
355 0 : break;
356 : }
357 :
358 0 : com::sun::star::beans::PropertyValue aPropValue;
359 0 : aPropValue.Name = sShadeMode;
360 0 : aPropValue.Value <<= eShadeMode;
361 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
362 :
363 0 : aPropValue.Name = sMetal;
364 0 : aPropValue.Value <<= bMetal;
365 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
366 :
367 0 : aPropValue.Name = sSpecularity;
368 0 : aPropValue.Value <<= fSpecularity;
369 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
370 :
371 0 : aPropValue.Name = sDiffusion;
372 0 : aPropValue.Value <<= fDiffusion;
373 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
374 : }
375 : }
376 0 : break;
377 : case SID_EXTRUSION_LIGHTING_INTENSITY:
378 : {
379 : static const char sBrightness[] = "Brightness";
380 : static const char sLightFace[] = "LightFace";
381 : static const char sFirstLightHarsh[] = "FirstLightHarsh";
382 : static const char sSecondLightHarsh[] = "SecondLightHarsh";
383 : static const char sFirstLightLevel[] = "FirstLightLevel";
384 : static const char sSecondLightLevel[] = "SecondLightLevel";
385 :
386 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_INTENSITY ) == SfxItemState::SET)
387 : {
388 0 : sal_Int32 nLevel = static_cast<const SfxInt32Item*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_LIGHTING_INTENSITY))->GetValue();
389 :
390 : double fBrightness;
391 0 : bool bHarsh2 = false;
392 : double fLevel1;
393 : double fLevel2;
394 :
395 0 : switch( nLevel )
396 : {
397 : case 0: // bright
398 0 : fBrightness = 34.0;
399 0 : bHarsh2 = false;
400 0 : fLevel1 = 66.0;
401 0 : fLevel2 = 66.0;
402 0 : break;
403 : case 1: // normal
404 0 : fBrightness = 15.0;
405 0 : bHarsh2 = false;
406 0 : fLevel1 = 67.0;
407 0 : fLevel2 = 37.0;
408 0 : break;
409 : case 2: // dim
410 0 : fBrightness = 6.0;
411 0 : bHarsh2 = true;
412 0 : fLevel1 = 79.0;
413 0 : fLevel2 = 21.0;
414 0 : break;
415 : }
416 :
417 0 : com::sun::star::beans::PropertyValue aPropValue;
418 0 : aPropValue.Name = sBrightness;
419 0 : aPropValue.Value <<= fBrightness;
420 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
421 :
422 0 : aPropValue.Name = sLightFace;
423 0 : aPropValue.Value <<= sal_True;
424 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
425 :
426 0 : aPropValue.Name = sFirstLightHarsh;
427 0 : aPropValue.Value <<= sal_True;
428 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
429 :
430 0 : aPropValue.Name = sSecondLightHarsh;
431 0 : aPropValue.Value <<= bHarsh2;
432 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
433 :
434 0 : aPropValue.Name = sFirstLightLevel;
435 0 : aPropValue.Value <<= fLevel1;
436 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
437 :
438 0 : aPropValue.Name = sSecondLightLevel;
439 0 : aPropValue.Value <<= fLevel2;
440 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
441 : }
442 : }
443 0 : break;
444 : case SID_EXTRUSION_LIGHTING_DIRECTION:
445 : {
446 0 : if( rReq.GetArgs() && rReq.GetArgs()->GetItemState( SID_EXTRUSION_LIGHTING_DIRECTION ) == SfxItemState::SET)
447 : {
448 0 : sal_Int32 nDirection = static_cast<const SfxInt32Item*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_LIGHTING_DIRECTION))->GetValue();
449 :
450 0 : if((nDirection >= 0) && (nDirection < 9))
451 : {
452 0 : const OUString sFirstLightDirection( "FirstLightDirection" );
453 0 : const OUString sSecondLightDirection( "SecondLightDirection" );
454 :
455 : const Direction3D * pLighting1Defaults;
456 : const Direction3D * pLighting2Defaults;
457 :
458 0 : getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
459 :
460 0 : com::sun::star::beans::PropertyValue aPropValue;
461 0 : aPropValue.Name = sFirstLightDirection;
462 0 : aPropValue.Value <<= pLighting1Defaults[nDirection];
463 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
464 :
465 0 : aPropValue.Name = sSecondLightDirection;
466 0 : aPropValue.Value <<= pLighting2Defaults[nDirection];
467 0 : rGeometryItem.SetPropertyValue( sExtrusion, aPropValue );
468 : }
469 : }
470 : }
471 0 : break;
472 :
473 : }
474 0 : }
475 :
476 0 : void ExtrusionBar::execute( SdrView* pSdrView, SfxRequest& rReq, SfxBindings& rBindings )
477 : {
478 0 : sal_uInt16 nSID = rReq.GetSlot();
479 0 : sal_uInt16 nStrResId = 0;
480 :
481 0 : const bool bUndo = pSdrView && pSdrView->IsUndoEnabled();
482 :
483 0 : switch( nSID )
484 : {
485 : case SID_EXTRUSION_TOOGLE:
486 : {
487 0 : if ( !nStrResId )
488 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ON_OFF;
489 : } // PASSTROUGH
490 : case SID_EXTRUSION_TILT_DOWN:
491 : {
492 0 : if ( !nStrResId )
493 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_DOWN;
494 : } // PASSTROUGH
495 : case SID_EXTRUSION_TILT_UP:
496 : {
497 0 : if ( !nStrResId )
498 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_UP;
499 : } // PASSTROUGH
500 : case SID_EXTRUSION_TILT_LEFT:
501 : {
502 0 : if ( !nStrResId )
503 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_LEFT;
504 : } // PASSTROUGH
505 : case SID_EXTRUSION_TILT_RIGHT:
506 : {
507 0 : if ( !nStrResId )
508 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ROTATE_RIGHT;
509 : } // PASSTROUGH
510 : case SID_EXTRUSION_DIRECTION:
511 : {
512 0 : if ( !nStrResId )
513 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_ORIENTATION;
514 : } // PASSTROUGH
515 : case SID_EXTRUSION_PROJECTION:
516 : {
517 0 : if ( !nStrResId )
518 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_PROJECTION;
519 : } // PASSTROUGH
520 : case SID_EXTRUSION_DEPTH:
521 : {
522 0 : if ( !nStrResId )
523 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_DEPTH;
524 : } // PASSTROUGH
525 : case SID_EXTRUSION_3D_COLOR:
526 : {
527 0 : if ( !nStrResId )
528 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_COLOR;
529 : } // PASSTROUGH
530 : case SID_EXTRUSION_SURFACE:
531 : {
532 0 : if ( !nStrResId )
533 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_SURFACE;
534 : } // PASSTROUGH
535 : case SID_EXTRUSION_LIGHTING_INTENSITY:
536 : {
537 0 : if ( !nStrResId )
538 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_BRIGHTNESS;
539 : } // PASSTROUGH
540 : case SID_EXTRUSION_LIGHTING_DIRECTION:
541 : {
542 0 : if ( !nStrResId )
543 0 : nStrResId = RID_SVXSTR_UNDO_APPLY_EXTRUSION_LIGHTING;
544 :
545 0 : if (pSdrView)
546 : {
547 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
548 0 : const size_t nCount = rMarkList.GetMarkCount();
549 :
550 0 : for(size_t i=0; i<nCount; ++i)
551 : {
552 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
553 0 : if( pObj->ISA(SdrObjCustomShape) )
554 : {
555 0 : if( bUndo )
556 : {
557 0 : OUString aStr( SVX_RESSTR( nStrResId ) );
558 0 : pSdrView->BegUndo( aStr );
559 0 : pSdrView->AddUndo( pSdrView->GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pObj ) );
560 : }
561 0 : SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )));
562 0 : impl_execute( pSdrView, rReq, aGeometryItem, pObj );
563 0 : pObj->SetMergedItem( aGeometryItem );
564 0 : pObj->BroadcastObjectChange();
565 0 : if( bUndo )
566 0 : pSdrView->EndUndo();
567 :
568 : // simulate a context change:
569 : // force SelectionHasChanged() being called
570 : // so that extrusion bar will be visible/hidden
571 0 : pSdrView->MarkListHasChanged();
572 : }
573 : }
574 : }
575 : }
576 0 : break;
577 :
578 : case SID_EXTRUSION_DEPTH_DIALOG:
579 0 : if( rReq.GetArgs() &&
580 0 : (rReq.GetArgs()->GetItemState( SID_EXTRUSION_DEPTH ) == SfxItemState::SET) &&
581 0 : (rReq.GetArgs()->GetItemState( SID_ATTR_METRIC ) == SfxItemState::SET))
582 : {
583 0 : double fDepth = static_cast<const SvxDoubleItem*>(rReq.GetArgs()->GetItem(SID_EXTRUSION_DEPTH))->GetValue();
584 0 : FieldUnit eUnit = (FieldUnit)static_cast<const SfxUInt16Item*>(rReq.GetArgs()->GetItem(SID_ATTR_METRIC))->GetValue();
585 :
586 0 : ScopedVclPtrInstance< ExtrusionDepthDialog > aDlg(nullptr, fDepth, eUnit);
587 0 : sal_uInt16 nRet = aDlg->Execute();
588 0 : if( nRet != 0 )
589 : {
590 0 : fDepth = aDlg->getDepth();
591 :
592 0 : SvxDoubleItem aItem( fDepth, SID_EXTRUSION_DEPTH );
593 0 : SfxPoolItem* aItems[] = { &aItem, 0 };
594 0 : rBindings.Execute( SID_EXTRUSION_DEPTH, const_cast<const SfxPoolItem**>(aItems) );
595 0 : }
596 : }
597 0 : break;
598 : }
599 :
600 0 : if( nSID == SID_EXTRUSION_TOOGLE )
601 : {
602 : static sal_uInt16 SidArray[] = {
603 : SID_EXTRUSION_TILT_DOWN,
604 : SID_EXTRUSION_TILT_UP,
605 : SID_EXTRUSION_TILT_LEFT,
606 : SID_EXTRUSION_TILT_RIGHT,
607 : SID_EXTRUSION_DEPTH_FLOATER,
608 : SID_EXTRUSION_DIRECTION_FLOATER,
609 : SID_EXTRUSION_LIGHTING_FLOATER,
610 : SID_EXTRUSION_SURFACE_FLOATER,
611 : SID_EXTRUSION_3D_COLOR,
612 : SID_EXTRUSION_DEPTH,
613 : SID_EXTRUSION_DIRECTION,
614 : SID_EXTRUSION_PROJECTION,
615 : SID_EXTRUSION_LIGHTING_DIRECTION,
616 : SID_EXTRUSION_LIGHTING_INTENSITY,
617 : SID_EXTRUSION_SURFACE,
618 : 0 };
619 :
620 0 : rBindings.Invalidate( SidArray );
621 : }
622 0 : }
623 :
624 0 : void getExtrusionDirectionState( SdrView* pSdrView, SfxItemSet& rSet )
625 : {
626 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
627 0 : const size_t nCount = rMarkList.GetMarkCount();
628 :
629 : static const char sExtrusion[] = "Extrusion";
630 : static const char sViewPoint[] = "ViewPoint";
631 : static const char sOrigin[] = "Origin";
632 : static const char sSkew[] = "Skew";
633 : static const char sProjectionMode[] = "ProjectionMode";
634 :
635 : const com::sun::star::uno::Any* pAny;
636 :
637 0 : double fFinalSkewAngle = -1;
638 0 : bool bHasCustomShape = false;
639 :
640 0 : for(size_t i=0; i<nCount; ++i)
641 : {
642 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
643 0 : if( pObj->ISA(SdrObjCustomShape) )
644 : {
645 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
646 :
647 : // see if this is an extruded customshape
648 0 : if( !bHasCustomShape )
649 : {
650 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
651 0 : if( pAny_ )
652 0 : *pAny_ >>= bHasCustomShape;
653 :
654 0 : if( !bHasCustomShape )
655 0 : continue;
656 : }
657 :
658 0 : bool bParallel = true;
659 0 : Position3D aViewPoint( 3472, -3472, 25000 );
660 0 : double fSkewAngle = -135;
661 :
662 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sProjectionMode );
663 0 : sal_Int16 nProjectionMode = sal_Int16();
664 0 : if( pAny && ( *pAny >>= nProjectionMode ) )
665 0 : bParallel = nProjectionMode == ProjectionMode_PARALLEL;
666 :
667 0 : if( bParallel )
668 : {
669 0 : double fSkew = 50.0;
670 0 : EnhancedCustomShapeParameterPair aSkewPropPair;
671 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sSkew );
672 0 : if( pAny && ( *pAny >>= aSkewPropPair ) )
673 : {
674 0 : aSkewPropPair.First.Value >>= fSkew;
675 0 : aSkewPropPair.Second.Value >>= fSkewAngle;
676 : }
677 0 : if ( fSkew == 0.0 )
678 0 : fSkewAngle = 0.0;
679 0 : else if ( fSkewAngle == 0.0 )
680 0 : fSkewAngle = -360.0;
681 : }
682 : else
683 : {
684 0 : double fOriginX = 0.50;
685 0 : double fOriginY = -0.50;
686 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sViewPoint );
687 0 : if( pAny )
688 0 : *pAny >>= aViewPoint;
689 :
690 0 : EnhancedCustomShapeParameterPair aOriginPropPair;
691 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sOrigin );
692 0 : if( pAny && ( *pAny >>= aOriginPropPair ) )
693 : {
694 0 : aOriginPropPair.First.Value >>= fOriginX;
695 0 : aOriginPropPair.Second.Value >>= fOriginY;
696 : }
697 0 : fSkewAngle = -1;
698 0 : const double e = 0.0001;
699 0 : if( aViewPoint.PositionX > e )
700 : {
701 0 : if( aViewPoint.PositionY > e )
702 : {
703 0 : if( (fOriginX > e ) && ( fOriginY > e ) )
704 0 : fSkewAngle = 135.0;
705 : }
706 0 : else if( aViewPoint.PositionY < -e )
707 : {
708 0 : if( ( fOriginX > e ) && ( fOriginY < -e ) )
709 0 : fSkewAngle = -135.0;
710 : }
711 : else
712 : {
713 0 : if( ( fOriginX > e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
714 0 : fSkewAngle = 180.0;
715 : }
716 : }
717 0 : else if( aViewPoint.PositionX < -e )
718 : {
719 0 : if( aViewPoint.PositionY < -e )
720 : {
721 0 : if( ( fOriginX < -e ) && ( fOriginY < -e ) )
722 0 : fSkewAngle = -45.0;
723 : }
724 0 : else if( aViewPoint.PositionY > e )
725 : {
726 0 : if( ( fOriginX < -e ) && ( fOriginY > e ) )
727 0 : fSkewAngle = 45.0;
728 : }
729 : else
730 : {
731 0 : if( ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
732 0 : fSkewAngle = -360.0;
733 : }
734 : }
735 : else
736 : {
737 0 : if( aViewPoint.PositionY < -e )
738 : {
739 0 : if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY < -e ) )
740 0 : fSkewAngle = -90.0;
741 : }
742 0 : else if( aViewPoint.PositionY > e )
743 : {
744 0 : if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > e ) )
745 0 : fSkewAngle = 90.0;
746 : }
747 : else
748 : {
749 0 : if( ( fOriginX > -e ) && ( fOriginX < e ) && ( fOriginY > -e ) && ( fOriginY < e ) )
750 0 : fSkewAngle = 0.0;
751 : }
752 0 : }
753 : }
754 :
755 0 : if( fFinalSkewAngle == -1.0 )
756 : {
757 0 : fFinalSkewAngle = fSkewAngle;
758 : }
759 0 : else if( fSkewAngle != fFinalSkewAngle )
760 : {
761 0 : fFinalSkewAngle = -1.0;
762 : }
763 :
764 0 : if( fFinalSkewAngle == -1.0 )
765 0 : break;
766 : }
767 : }
768 :
769 0 : if( bHasCustomShape )
770 0 : rSet.Put( SfxInt32Item( SID_EXTRUSION_DIRECTION, (sal_Int32)fFinalSkewAngle ) );
771 : else
772 0 : rSet.DisableItem( SID_EXTRUSION_DIRECTION );
773 0 : }
774 :
775 0 : void getExtrusionProjectionState( SdrView* pSdrView, SfxItemSet& rSet )
776 : {
777 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
778 0 : const size_t nCount = rMarkList.GetMarkCount();
779 :
780 : static const char sExtrusion[] = "Extrusion";
781 : static const char sProjectionMode[] = "ProjectionMode";
782 :
783 : const com::sun::star::uno::Any* pAny;
784 :
785 0 : sal_Int32 nFinalProjection = -1;
786 0 : bool bHasCustomShape = false;
787 :
788 0 : for(size_t i=0; i<nCount; ++i)
789 : {
790 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
791 0 : if( pObj->ISA(SdrObjCustomShape) )
792 : {
793 : // see if this is an extruded customshape
794 0 : if( !bHasCustomShape )
795 : {
796 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
797 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
798 0 : if( pAny_ )
799 0 : *pAny_ >>= bHasCustomShape;
800 :
801 0 : if( !bHasCustomShape )
802 0 : continue;
803 : }
804 :
805 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
806 :
807 0 : bool bParallel = true;
808 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sProjectionMode );
809 : ProjectionMode eProjectionMode;
810 0 : if( pAny && ( *pAny >>= eProjectionMode ) )
811 0 : bParallel = eProjectionMode == ProjectionMode_PARALLEL;
812 :
813 0 : if( nFinalProjection == -1 )
814 : {
815 0 : nFinalProjection = bParallel ? 1 : 0;
816 : }
817 0 : else if( nFinalProjection != (bParallel ? 1 : 0) )
818 : {
819 0 : nFinalProjection = -1;
820 0 : break;
821 0 : }
822 : }
823 : }
824 :
825 0 : if( bHasCustomShape )
826 0 : rSet.Put( SfxInt32Item( SID_EXTRUSION_PROJECTION, nFinalProjection ) );
827 : else
828 0 : rSet.DisableItem( SID_EXTRUSION_PROJECTION );
829 0 : }
830 :
831 0 : void getExtrusionSurfaceState( SdrView* pSdrView, SfxItemSet& rSet )
832 : {
833 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
834 0 : const size_t nCount = rMarkList.GetMarkCount();
835 :
836 : static const char sExtrusion[] = "Extrusion";
837 : static const char sShadeMode[] = "ShadeMode";
838 : static const char sSpecularity[] = "Specularity";
839 : static const char sMetal[] = "Metal";
840 :
841 : const com::sun::star::uno::Any* pAny;
842 :
843 0 : sal_Int32 nFinalSurface = -1;
844 0 : bool bHasCustomShape = false;
845 :
846 0 : for(size_t i=0; i<nCount; ++i)
847 : {
848 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
849 0 : if( pObj->ISA(SdrObjCustomShape) )
850 : {
851 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
852 :
853 : // see if this is an extruded customshape
854 0 : if( !bHasCustomShape )
855 : {
856 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
857 0 : if( pAny_ )
858 0 : *pAny_ >>= bHasCustomShape;
859 :
860 0 : if( !bHasCustomShape )
861 0 : continue;
862 : }
863 :
864 0 : sal_Int32 nSurface = 0; // wire frame
865 :
866 0 : ShadeMode eShadeMode( ShadeMode_FLAT );
867 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sShadeMode );
868 0 : if( pAny )
869 0 : *pAny >>= eShadeMode;
870 :
871 0 : if( eShadeMode == ShadeMode_FLAT )
872 : {
873 0 : bool bMetal = false;
874 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sMetal );
875 0 : if( pAny )
876 0 : *pAny >>= bMetal;
877 :
878 0 : if( bMetal )
879 : {
880 0 : nSurface = 3; // metal
881 : }
882 : else
883 : {
884 0 : double fSpecularity = 0;
885 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sSpecularity );
886 0 : if( pAny )
887 0 : *pAny >>= fSpecularity;
888 :
889 0 : const double e = 0.0001;
890 0 : if( (fSpecularity > -e) && (fSpecularity < e) )
891 : {
892 0 : nSurface = 1; // matte
893 : }
894 : else
895 : {
896 0 : nSurface = 2; // plastic
897 : }
898 : }
899 : }
900 :
901 0 : if( nFinalSurface == -1 )
902 : {
903 0 : nFinalSurface = nSurface;
904 : }
905 0 : else if( nFinalSurface != nSurface )
906 : {
907 0 : nFinalSurface = -1;
908 0 : break;
909 0 : }
910 : }
911 : }
912 :
913 0 : if( bHasCustomShape )
914 0 : rSet.Put( SfxInt32Item( SID_EXTRUSION_SURFACE, nFinalSurface ) );
915 : else
916 0 : rSet.DisableItem( SID_EXTRUSION_SURFACE );
917 0 : }
918 :
919 0 : void getExtrusionDepthState( SdrView* pSdrView, SfxItemSet& rSet )
920 : {
921 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
922 0 : const size_t nCount = rMarkList.GetMarkCount();
923 :
924 : static const char sExtrusion[] = "Extrusion";
925 : static const char sDepth[] = "Depth";
926 :
927 : const com::sun::star::uno::Any* pAny;
928 :
929 0 : double fFinalDepth = -1;
930 0 : bool bHasCustomShape = false;
931 :
932 0 : for(size_t i=0; i<nCount; ++i)
933 : {
934 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
935 0 : if( pObj->ISA(SdrObjCustomShape) )
936 : {
937 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
938 :
939 : // see if this is an extruded customshape
940 0 : if( !bHasCustomShape )
941 : {
942 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
943 0 : if( pAny_ )
944 0 : *pAny_ >>= bHasCustomShape;
945 :
946 0 : if( !bHasCustomShape )
947 0 : continue;
948 : }
949 :
950 0 : double fDepth = 1270.0;
951 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sDepth );
952 0 : if( pAny )
953 : {
954 0 : EnhancedCustomShapeParameterPair aDepthPropPair;
955 0 : if ( *pAny >>= aDepthPropPair )
956 0 : aDepthPropPair.First.Value >>= fDepth;
957 : }
958 :
959 0 : if( fFinalDepth == -1 )
960 : {
961 0 : fFinalDepth = fDepth;
962 : }
963 0 : else if( fFinalDepth != fDepth )
964 : {
965 0 : fFinalDepth = -1;
966 0 : break;
967 0 : }
968 : }
969 : }
970 :
971 0 : if( pSdrView->GetModel() )
972 : {
973 0 : FieldUnit eUnit = pSdrView->GetModel()->GetUIUnit();
974 0 : rSet.Put( SfxUInt16Item( SID_ATTR_METRIC, (sal_uInt16)eUnit ) );
975 : }
976 :
977 0 : if( bHasCustomShape )
978 0 : rSet.Put( SvxDoubleItem( fFinalDepth, SID_EXTRUSION_DEPTH ) );
979 : else
980 0 : rSet.DisableItem( SID_EXTRUSION_DEPTH );
981 0 : }
982 :
983 0 : static bool compare_direction( const Direction3D& d1, const Direction3D& d2 )
984 : {
985 0 : if( ((d1.DirectionX < 0) && (d2.DirectionX < 0)) || ((d1.DirectionX == 0) && (d2.DirectionX == 0)) || ((d1.DirectionX > 0) && (d2.DirectionX > 0)) )
986 : {
987 0 : if( ((d1.DirectionY < 0) && (d2.DirectionY < 0)) || ((d1.DirectionY == 0) && (d2.DirectionY == 0)) || ((d1.DirectionY > 0) && (d2.DirectionY > 0)) )
988 : {
989 0 : if( ((d1.DirectionZ < 0) && (d2.DirectionZ < 0)) || ((d1.DirectionZ == 0) && (d2.DirectionZ == 0)) || ((d1.DirectionZ > 0) && (d2.DirectionZ > 0)) )
990 : {
991 0 : return true;
992 : }
993 : }
994 : }
995 :
996 0 : return false;
997 : }
998 :
999 0 : void getExtrusionLightingDirectionState( SdrView* pSdrView, SfxItemSet& rSet )
1000 : {
1001 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
1002 0 : const size_t nCount = rMarkList.GetMarkCount();
1003 :
1004 : static const char sExtrusion[] = "Extrusion";
1005 : static const char sFirstLightDirection[] = "FirstLightDirection";
1006 : static const char sSecondLightDirection[] = "SecondLightDirection";
1007 :
1008 : const Direction3D * pLighting1Defaults;
1009 : const Direction3D * pLighting2Defaults;
1010 :
1011 0 : getLightingDirectionDefaults( &pLighting1Defaults, &pLighting2Defaults );
1012 :
1013 : const com::sun::star::uno::Any* pAny;
1014 :
1015 0 : int nFinalDirection = -1;
1016 0 : bool bHasCustomShape = false;
1017 :
1018 0 : for(size_t i=0; i<nCount; ++i)
1019 : {
1020 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
1021 0 : if( pObj->ISA(SdrObjCustomShape) )
1022 : {
1023 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
1024 :
1025 : // see if this is an extruded customshape
1026 0 : if( !bHasCustomShape )
1027 : {
1028 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
1029 0 : if( pAny_ )
1030 0 : *pAny_ >>= bHasCustomShape;
1031 :
1032 0 : if( !bHasCustomShape )
1033 0 : continue;
1034 : }
1035 :
1036 0 : Direction3D aFirstLightDirection( 50000, 0, 10000 );
1037 0 : Direction3D aSecondLightDirection( -50000, 0, 10000 );
1038 :
1039 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sFirstLightDirection );
1040 0 : if( pAny )
1041 0 : *pAny >>= aFirstLightDirection;
1042 :
1043 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sSecondLightDirection );
1044 0 : if( pAny )
1045 0 : *pAny >>= aSecondLightDirection;
1046 :
1047 0 : int nDirection = -1;
1048 :
1049 : int j;
1050 0 : for( j = 0; j < 9; j++ )
1051 : {
1052 0 : if( compare_direction( aFirstLightDirection, pLighting1Defaults[j] ) &&
1053 0 : compare_direction( aSecondLightDirection, pLighting2Defaults[j] ))
1054 : {
1055 0 : nDirection = j;
1056 0 : break;
1057 : }
1058 : }
1059 :
1060 0 : if( nFinalDirection == -1 )
1061 : {
1062 0 : nFinalDirection = nDirection;
1063 : }
1064 0 : else if( nDirection != nFinalDirection )
1065 : {
1066 0 : nFinalDirection = -1;
1067 : }
1068 :
1069 0 : if( nFinalDirection == -1 )
1070 0 : break;
1071 : }
1072 : }
1073 :
1074 0 : if( bHasCustomShape )
1075 0 : rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_DIRECTION, (sal_Int32)nFinalDirection ) );
1076 : else
1077 0 : rSet.DisableItem( SID_EXTRUSION_LIGHTING_DIRECTION );
1078 0 : }
1079 :
1080 0 : void getExtrusionLightingIntensityState( SdrView* pSdrView, SfxItemSet& rSet )
1081 : {
1082 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
1083 0 : const size_t nCount = rMarkList.GetMarkCount();
1084 :
1085 : static const char sExtrusion[] = "Extrusion";
1086 : static const char sBrightness[] = "Brightness";
1087 :
1088 : const com::sun::star::uno::Any* pAny;
1089 :
1090 0 : int nFinalLevel = -1;
1091 0 : bool bHasCustomShape = false;
1092 :
1093 0 : for(size_t i=0; i<nCount; ++i)
1094 : {
1095 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
1096 0 : if( pObj->ISA(SdrObjCustomShape) )
1097 : {
1098 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
1099 :
1100 : // see if this is an extruded customshape
1101 0 : if( !bHasCustomShape )
1102 : {
1103 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
1104 0 : if( pAny_ )
1105 0 : *pAny_ >>= bHasCustomShape;
1106 :
1107 0 : if( !bHasCustomShape )
1108 0 : continue;
1109 : }
1110 :
1111 0 : double fBrightness = 22178.0 / 655.36;
1112 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sBrightness );
1113 0 : if( pAny )
1114 0 : *pAny >>= fBrightness;
1115 :
1116 : int nLevel;
1117 0 : if( fBrightness >= 30.0 )
1118 : {
1119 0 : nLevel = 0; // Bright
1120 : }
1121 0 : else if( fBrightness >= 10.0 )
1122 : {
1123 0 : nLevel = 1; // Noraml;
1124 : }
1125 : else
1126 : {
1127 0 : nLevel = 2; // Dim
1128 : }
1129 :
1130 0 : if( nFinalLevel == -1 )
1131 : {
1132 0 : nFinalLevel = nLevel;
1133 : }
1134 0 : else if( nFinalLevel != nLevel )
1135 : {
1136 0 : nFinalLevel = -1;
1137 0 : break;
1138 0 : }
1139 : }
1140 : }
1141 :
1142 0 : if( bHasCustomShape )
1143 0 : rSet.Put( SfxInt32Item( SID_EXTRUSION_LIGHTING_INTENSITY, nFinalLevel ) );
1144 : else
1145 0 : rSet.DisableItem( SID_EXTRUSION_LIGHTING_INTENSITY );
1146 0 : }
1147 :
1148 0 : void getExtrusionColorState( SdrView* pSdrView, SfxItemSet& rSet )
1149 : {
1150 0 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
1151 0 : const size_t nCount = rMarkList.GetMarkCount();
1152 :
1153 : static const char sExtrusion[] = "Extrusion";
1154 : static const char sExtrusionColor[] = "Color";
1155 :
1156 : const com::sun::star::uno::Any* pAny;
1157 :
1158 0 : bool bInit = false;
1159 0 : bool bAmbigius = false;
1160 0 : Color aFinalColor;
1161 0 : bool bHasCustomShape = false;
1162 :
1163 0 : for(size_t i=0; i<nCount; ++i)
1164 : {
1165 0 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
1166 0 : if( pObj->ISA(SdrObjCustomShape) )
1167 : {
1168 0 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY )) );
1169 :
1170 : // see if this is an extruded customshape
1171 0 : if( !bHasCustomShape )
1172 : {
1173 0 : const Any* pAny_ = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
1174 0 : if( pAny_ )
1175 0 : *pAny_ >>= bHasCustomShape;
1176 :
1177 0 : if( !bHasCustomShape )
1178 0 : continue;
1179 : }
1180 :
1181 0 : Color aColor;
1182 :
1183 0 : bool bUseColor = false;
1184 0 : pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusionColor );
1185 0 : if( pAny )
1186 0 : *pAny >>= bUseColor;
1187 :
1188 0 : if( bUseColor )
1189 : {
1190 0 : const XSecondaryFillColorItem& rItem = *static_cast<const XSecondaryFillColorItem*>(&(pObj->GetMergedItem( XATTR_SECONDARYFILLCOLOR )));
1191 0 : aColor = rItem.GetColorValue();
1192 : }
1193 : else
1194 : {
1195 0 : aColor = COL_AUTO;
1196 : }
1197 :
1198 0 : if( !bInit )
1199 : {
1200 0 : aFinalColor = aColor;
1201 0 : bInit = true;
1202 : }
1203 0 : else if( aFinalColor != aColor )
1204 : {
1205 0 : bAmbigius = true;
1206 0 : break;
1207 0 : }
1208 : }
1209 : }
1210 :
1211 0 : if( bAmbigius )
1212 0 : aFinalColor = COL_AUTO;
1213 :
1214 0 : if( bHasCustomShape )
1215 0 : rSet.Put( SvxColorItem( aFinalColor, SID_EXTRUSION_3D_COLOR ) );
1216 : else
1217 0 : rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
1218 0 : }
1219 :
1220 : namespace svx {
1221 4886 : bool checkForSelectedCustomShapes( SdrView* pSdrView, bool bOnlyExtruded )
1222 : {
1223 : static const char sExtrusion[] = "Extrusion";
1224 :
1225 4886 : const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
1226 4886 : const size_t nCount = rMarkList.GetMarkCount();
1227 4886 : bool bFound = false;
1228 :
1229 4909 : for(size_t i=0;(i<nCount) && !bFound ; ++i)
1230 : {
1231 23 : SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
1232 23 : if( pObj->ISA(SdrObjCustomShape) )
1233 : {
1234 3 : if( bOnlyExtruded )
1235 : {
1236 3 : const SdrCustomShapeGeometryItem aGeometryItem( static_cast<const SdrCustomShapeGeometryItem&>(pObj->GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ));
1237 3 : const Any* pAny = aGeometryItem.GetPropertyValueByName( sExtrusion, sExtrusion );
1238 3 : if( pAny )
1239 0 : *pAny >>= bFound;
1240 : }
1241 : else
1242 : {
1243 0 : bFound = true;
1244 : }
1245 : }
1246 : }
1247 :
1248 4886 : return bFound;
1249 : }
1250 : }
1251 :
1252 4175 : void ExtrusionBar::getState( SdrView* pSdrView, SfxItemSet& rSet )
1253 : {
1254 4175 : if (rSet.GetItemState(SID_EXTRUSION_DIRECTION) != SfxItemState::UNKNOWN)
1255 : {
1256 0 : getExtrusionDirectionState( pSdrView, rSet );
1257 : }
1258 4175 : if (rSet.GetItemState(SID_EXTRUSION_PROJECTION) != SfxItemState::UNKNOWN)
1259 : {
1260 0 : getExtrusionProjectionState( pSdrView, rSet );
1261 : }
1262 : const bool bOnlyExtrudedCustomShapes =
1263 4175 : checkForSelectedCustomShapes( pSdrView, true );
1264 4175 : if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SfxItemState::UNKNOWN)
1265 : {
1266 0 : if (! bOnlyExtrudedCustomShapes)
1267 0 : rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
1268 : }
1269 4175 : if (rSet.GetItemState(SID_EXTRUSION_TILT_DOWN) != SfxItemState::UNKNOWN)
1270 : {
1271 0 : if (! bOnlyExtrudedCustomShapes)
1272 0 : rSet.DisableItem( SID_EXTRUSION_TILT_DOWN );
1273 : }
1274 4175 : if (rSet.GetItemState(SID_EXTRUSION_TILT_UP) != SfxItemState::UNKNOWN)
1275 : {
1276 0 : if (! bOnlyExtrudedCustomShapes)
1277 0 : rSet.DisableItem( SID_EXTRUSION_TILT_UP );
1278 : }
1279 4175 : if (rSet.GetItemState(SID_EXTRUSION_TILT_LEFT) != SfxItemState::UNKNOWN)
1280 : {
1281 0 : if (! bOnlyExtrudedCustomShapes)
1282 0 : rSet.DisableItem( SID_EXTRUSION_TILT_LEFT );
1283 : }
1284 4175 : if (rSet.GetItemState(SID_EXTRUSION_TILT_RIGHT) != SfxItemState::UNKNOWN)
1285 : {
1286 0 : if (! bOnlyExtrudedCustomShapes)
1287 0 : rSet.DisableItem( SID_EXTRUSION_TILT_RIGHT );
1288 : }
1289 4175 : if (rSet.GetItemState(SID_EXTRUSION_3D_COLOR) != SfxItemState::UNKNOWN)
1290 : {
1291 0 : if (! bOnlyExtrudedCustomShapes)
1292 0 : rSet.DisableItem( SID_EXTRUSION_3D_COLOR );
1293 : }
1294 4175 : if (rSet.GetItemState(SID_EXTRUSION_DEPTH_FLOATER) != SfxItemState::UNKNOWN)
1295 : {
1296 0 : if (! bOnlyExtrudedCustomShapes)
1297 0 : rSet.DisableItem( SID_EXTRUSION_DEPTH_FLOATER );
1298 : }
1299 4175 : if (rSet.GetItemState(SID_EXTRUSION_DIRECTION_FLOATER) != SfxItemState::UNKNOWN)
1300 : {
1301 0 : if (! bOnlyExtrudedCustomShapes)
1302 0 : rSet.DisableItem( SID_EXTRUSION_DIRECTION_FLOATER );
1303 : }
1304 4175 : if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_FLOATER) != SfxItemState::UNKNOWN)
1305 : {
1306 0 : if (! bOnlyExtrudedCustomShapes)
1307 0 : rSet.DisableItem( SID_EXTRUSION_LIGHTING_FLOATER );
1308 : }
1309 4175 : if (rSet.GetItemState(SID_EXTRUSION_SURFACE_FLOATER) != SfxItemState::UNKNOWN)
1310 : {
1311 0 : if(! bOnlyExtrudedCustomShapes)
1312 0 : rSet.DisableItem( SID_EXTRUSION_SURFACE_FLOATER );
1313 : }
1314 4175 : if (rSet.GetItemState(SID_EXTRUSION_TOOGLE) != SfxItemState::UNKNOWN)
1315 : {
1316 171 : if( !checkForSelectedCustomShapes( pSdrView, false ) )
1317 171 : rSet.DisableItem( SID_EXTRUSION_TOOGLE );
1318 : }
1319 4175 : if (rSet.GetItemState(SID_EXTRUSION_DEPTH) != SfxItemState::UNKNOWN)
1320 : {
1321 0 : getExtrusionDepthState( pSdrView, rSet );
1322 : }
1323 4175 : if (rSet.GetItemState(SID_EXTRUSION_SURFACE) != SfxItemState::UNKNOWN)
1324 : {
1325 0 : getExtrusionSurfaceState( pSdrView, rSet );
1326 : }
1327 4175 : if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_INTENSITY) != SfxItemState::UNKNOWN)
1328 : {
1329 0 : getExtrusionLightingIntensityState( pSdrView, rSet );
1330 : }
1331 :
1332 4175 : if (rSet.GetItemState(SID_EXTRUSION_LIGHTING_DIRECTION) != SfxItemState::UNKNOWN)
1333 : {
1334 0 : getExtrusionLightingDirectionState( pSdrView, rSet );
1335 : }
1336 :
1337 4175 : if (rSet.GetItemState(SID_EXTRUSION_3D_COLOR) != SfxItemState::UNKNOWN)
1338 : {
1339 0 : getExtrusionColorState( pSdrView, rSet );
1340 : }
1341 4610 : }
1342 :
1343 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
