Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 :
21 : #include "fuconrec.hxx"
22 : #include "tabvwsh.hxx"
23 : #include "sc.hrc"
24 : #include "drawview.hxx"
25 :
26 : #include <editeng/outlobj.hxx>
27 : // Create default drawing objects via keyboard
28 : #include <svx/svdopath.hxx>
29 : #include <svx/svdocapt.hxx>
30 : #include <basegfx/polygon/b2dpolygon.hxx>
31 : #include <basegfx/point/b2dpoint.hxx>
32 :
33 : #include "scresid.hxx"
34 :
35 :
36 : /*************************************************************************
37 : |*
38 : |* Konstruktor
39 : |*
40 : \************************************************************************/
41 :
42 0 : FuConstRectangle::FuConstRectangle(ScTabViewShell* pViewSh, Window* pWin, ScDrawView* pViewP,
43 : SdrModel* pDoc, SfxRequest& rReq)
44 0 : : FuConstruct(pViewSh, pWin, pViewP, pDoc, rReq)
45 : {
46 0 : }
47 :
48 : /*************************************************************************
49 : |*
50 : |* Destruktor
51 : |*
52 : \************************************************************************/
53 :
54 0 : FuConstRectangle::~FuConstRectangle()
55 : {
56 0 : }
57 :
58 : /*************************************************************************
59 : |*
60 : |* MouseButtonDown-event
61 : |*
62 : \************************************************************************/
63 :
64 0 : bool FuConstRectangle::MouseButtonDown(const MouseEvent& rMEvt)
65 : {
66 : // remember button state for creation of own MouseEvents
67 0 : SetMouseButtonCode(rMEvt.GetButtons());
68 :
69 0 : bool bReturn = FuConstruct::MouseButtonDown(rMEvt);
70 :
71 0 : if ( rMEvt.IsLeft() && !pView->IsAction() )
72 : {
73 0 : Point aPos( pWindow->PixelToLogic( rMEvt.GetPosPixel() ) );
74 : // Hack to align object to nearest grid position where object
75 : // would be anchored ( if it were cell anchored )
76 : // Get grid offset for current position ( note: aPnt is
77 : // also adjusted )
78 0 : Point aGridOff = CurrentGridSyncOffsetAndPos( aPos );
79 0 : pWindow->CaptureMouse();
80 :
81 0 : if ( pView->GetCurrentObjIdentifier() == OBJ_CAPTION )
82 : {
83 0 : Size aCaptionSize ( 2268, 1134 ); // 4x2cm
84 :
85 0 : bReturn = pView->BegCreateCaptionObj( aPos, aCaptionSize );
86 :
87 : // wie stellt man den Font ein, mit dem geschrieben wird
88 : }
89 : else
90 0 : bReturn = pView->BegCreateObj(aPos);
91 0 : if ( bReturn )
92 0 : pView->GetCreateObj()->SetGridOffset( aGridOff );
93 : }
94 0 : return bReturn;
95 : }
96 :
97 : /*************************************************************************
98 : |*
99 : |* MouseMove-event
100 : |*
101 : \************************************************************************/
102 :
103 0 : bool FuConstRectangle::MouseMove(const MouseEvent& rMEvt)
104 : {
105 0 : return FuConstruct::MouseMove(rMEvt);
106 : }
107 :
108 : /*************************************************************************
109 : |*
110 : |* MouseButtonUp-event
111 : |*
112 : \************************************************************************/
113 :
114 0 : bool FuConstRectangle::MouseButtonUp(const MouseEvent& rMEvt)
115 : {
116 : // remember button state for creation of own MouseEvents
117 0 : SetMouseButtonCode(rMEvt.GetButtons());
118 :
119 0 : bool bReturn = false;
120 :
121 0 : if ( pView->IsCreateObj() && rMEvt.IsLeft() )
122 : {
123 0 : pView->EndCreateObj(SDRCREATE_FORCEEND);
124 :
125 0 : if (aSfxRequest.GetSlot() == SID_DRAW_CAPTION_VERTICAL)
126 : {
127 : // set vertical flag for caption object
128 :
129 0 : const SdrMarkList& rMarkList = pView->GetMarkedObjectList();
130 0 : if (rMarkList.GetMark(0))
131 : {
132 0 : SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
133 : // create OutlinerParaObject now so it can be set to vertical
134 0 : if ( pObj->ISA(SdrTextObj) )
135 0 : ((SdrTextObj*)pObj)->ForceOutlinerParaObject();
136 0 : OutlinerParaObject* pOPO = pObj->GetOutlinerParaObject();
137 0 : if( pOPO && !pOPO->IsVertical() )
138 0 : pOPO->SetVertical( true );
139 : }
140 : }
141 :
142 0 : bReturn = true;
143 : }
144 0 : return (FuConstruct::MouseButtonUp(rMEvt) || bReturn);
145 : }
146 :
147 : /*************************************************************************
148 : |*
149 : |* Tastaturereignisse bearbeiten
150 : |*
151 : |* Wird ein KeyEvent bearbeitet, so ist der Return-Wert sal_True, andernfalls
152 : |* FALSE.
153 : |*
154 : \************************************************************************/
155 :
156 0 : bool FuConstRectangle::KeyInput(const KeyEvent& rKEvt)
157 : {
158 0 : return FuConstruct::KeyInput(rKEvt);
159 : }
160 :
161 : /*************************************************************************
162 : |*
163 : |* Function aktivieren
164 : |*
165 : \************************************************************************/
166 :
167 0 : void FuConstRectangle::Activate()
168 : {
169 : SdrObjKind aObjKind;
170 :
171 0 : switch (aSfxRequest.GetSlot() )
172 : {
173 : case SID_DRAW_LINE:
174 0 : aNewPointer = Pointer( POINTER_DRAW_LINE );
175 0 : aObjKind = OBJ_LINE;
176 0 : break;
177 :
178 : case SID_DRAW_RECT:
179 0 : aNewPointer = Pointer( POINTER_DRAW_RECT );
180 0 : aObjKind = OBJ_RECT;
181 0 : break;
182 :
183 : case SID_DRAW_ELLIPSE:
184 0 : aNewPointer = Pointer( POINTER_DRAW_ELLIPSE );
185 0 : aObjKind = OBJ_CIRC;
186 0 : break;
187 :
188 : case SID_DRAW_CAPTION:
189 : case SID_DRAW_CAPTION_VERTICAL:
190 0 : aNewPointer = Pointer( POINTER_DRAW_CAPTION );
191 0 : aObjKind = OBJ_CAPTION;
192 0 : break;
193 :
194 : default:
195 0 : aNewPointer = Pointer( POINTER_CROSS );
196 0 : aObjKind = OBJ_RECT;
197 0 : break;
198 : }
199 :
200 0 : pView->SetCurrentObj(sal::static_int_cast<sal_uInt16>(aObjKind));
201 :
202 0 : aOldPointer = pWindow->GetPointer();
203 0 : pViewShell->SetActivePointer( aNewPointer );
204 :
205 0 : FuConstruct::Activate();
206 0 : }
207 :
208 : /*************************************************************************
209 : |*
210 : |* Function deaktivieren
211 : |*
212 : \************************************************************************/
213 :
214 0 : void FuConstRectangle::Deactivate()
215 : {
216 0 : FuConstruct::Deactivate();
217 0 : pViewShell->SetActivePointer( aOldPointer );
218 0 : }
219 :
220 : // Create default drawing objects via keyboard
221 0 : SdrObject* FuConstRectangle::CreateDefaultObject(const sal_uInt16 nID, const Rectangle& rRectangle)
222 : {
223 : SdrObject* pObj = SdrObjFactory::MakeNewObject(
224 0 : pView->GetCurrentObjInventor(), pView->GetCurrentObjIdentifier(),
225 0 : 0L, pDrDoc);
226 :
227 0 : if(pObj)
228 : {
229 0 : Rectangle aRect(rRectangle);
230 0 : Point aStart = aRect.TopLeft();
231 0 : Point aEnd = aRect.BottomRight();
232 :
233 0 : switch(nID)
234 : {
235 : case SID_DRAW_LINE:
236 : {
237 0 : if(pObj->ISA(SdrPathObj))
238 : {
239 0 : sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2);
240 0 : basegfx::B2DPolygon aPoly;
241 0 : aPoly.append(basegfx::B2DPoint(aStart.X(), nYMiddle));
242 0 : aPoly.append(basegfx::B2DPoint(aEnd.X(), nYMiddle));
243 0 : ((SdrPathObj*)pObj)->SetPathPoly(basegfx::B2DPolyPolygon(aPoly));
244 : }
245 : else
246 : {
247 : OSL_FAIL("Object is NO line object");
248 : }
249 :
250 0 : break;
251 : }
252 : case SID_DRAW_CAPTION:
253 : case SID_DRAW_CAPTION_VERTICAL:
254 : {
255 0 : if(pObj->ISA(SdrCaptionObj))
256 : {
257 0 : sal_Bool bIsVertical(SID_DRAW_CAPTION_VERTICAL == nID);
258 :
259 0 : ((SdrTextObj*)pObj)->SetVerticalWriting(bIsVertical);
260 :
261 0 : if(bIsVertical)
262 : {
263 0 : SfxItemSet aSet(pObj->GetMergedItemSet());
264 0 : aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER));
265 0 : aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT));
266 0 : pObj->SetMergedItemSet(aSet);
267 : }
268 :
269 : // don't set default text, start edit mode instead
270 : // (Edit mode is started in ScTabViewShell::ExecDraw, because
271 : // it must be handled by FuText)
272 : // String aText(ScResId(STR_CAPTION_DEFAULT_TEXT));
273 : // ((SdrCaptionObj*)pObj)->SetText(aText);
274 :
275 0 : ((SdrCaptionObj*)pObj)->SetLogicRect(aRect);
276 : ((SdrCaptionObj*)pObj)->SetTailPos(
277 0 : aRect.TopLeft() - Point(aRect.GetWidth() / 2, aRect.GetHeight() / 2));
278 : }
279 : else
280 : {
281 : OSL_FAIL("Object is NO caption object");
282 : }
283 :
284 0 : break;
285 : }
286 :
287 : default:
288 : {
289 0 : pObj->SetLogicRect(aRect);
290 :
291 0 : break;
292 : }
293 : }
294 :
295 0 : SfxItemSet aAttr(pDrDoc->GetItemPool());
296 0 : pObj->SetMergedItemSet(aAttr);
297 : }
298 :
299 0 : return pObj;
300 102 : }
301 :
302 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
