Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <sal/config.h>
21 :
22 : #include <cassert>
23 :
24 : #include <threadhelp/transactionmanager.hxx>
25 :
26 : #include <macros/generic.hxx>
27 :
28 : #include <com/sun/star/lang/DisposedException.hpp>
29 :
30 : namespace framework{
31 :
32 : /*-************************************************************************************************************
33 : @short standard ctor
34 : @descr Initialize instance with right start values for correct working.
35 : *//*-*************************************************************************************************************/
36 11766 : TransactionManager::TransactionManager()
37 : : m_eWorkingMode ( E_INIT )
38 11766 : , m_nTransactionCount ( 0 )
39 : {
40 11766 : m_aBarrier.open();
41 11766 : }
42 :
43 : /*-************************************************************************************************************
44 : @short standard dtor
45 : *//*-*************************************************************************************************************/
46 11604 : TransactionManager::~TransactionManager()
47 : {
48 11604 : }
49 :
50 : /*-****************************************************************************************************
51 : @short set new working mode
52 : @descr These implementation knows for states of working: E_INIT, E_WORK, E_CLOSING, E_CLOSE
53 : You can step during this ones only from the left to the right side and start at left side again!
54 : (This is necessary e.g. for refcounted objects!)
55 : This call will block till all current existing transactions was finished.
56 : Following results can occur:
57 : E_INIT : All requests on this implementation are refused.
58 : It's your decision to react in a right way.
59 :
60 : E_WORK : The object can work now. The full functionality is available.
61 :
62 : E_BEFORECLOSE : The object start the closing mechanism ... but sometimes
63 : e.g. the dispose() method need to call some private methods.
64 : These some special methods should use E_SOFTEXCEPTIONS
65 : to detect this special case!
66 :
67 : E_CLOSE : Object is already dead! All further requests will be refused.
68 : It's your decision to react in a right way.
69 : @param "eMode", is the new mode - but we don't accept setting mode in wrong order!
70 : @onerror We do nothing.
71 : *//*-*****************************************************************************************************/
72 17627 : void TransactionManager::setWorkingMode( EWorkingMode eMode )
73 : {
74 : // Safe member access.
75 17627 : ::osl::ClearableMutexGuard aAccessGuard( m_aAccessLock );
76 17627 : bool bWaitFor = false;
77 : // Change working mode first!
78 17627 : if (
79 35256 : ( m_eWorkingMode == E_INIT && eMode == E_WORK ) ||
80 23494 : ( (m_eWorkingMode == E_WORK || m_eWorkingMode == E_INIT) && eMode == E_BEFORECLOSE ) ||
81 11746 : ( m_eWorkingMode == E_BEFORECLOSE && eMode == E_CLOSE ) ||
82 0 : ( m_eWorkingMode == E_CLOSE && eMode == E_INIT )
83 : )
84 : {
85 17627 : m_eWorkingMode = eMode;
86 17627 : if( m_eWorkingMode == E_BEFORECLOSE || m_eWorkingMode == E_CLOSE )
87 : {
88 11746 : bWaitFor = true;
89 : }
90 : }
91 :
92 : // Wait for current existing transactions then!
93 : // (Only necessary for changing to E_BEFORECLOSE or E_CLOSE! ...
94 : // otherwise; if you wait at setting E_WORK another thrad could finish a acquire-call during our unlock() and wait() call
95 : // ... and we will wait forever here!!!)
96 : // Don't forget to release access mutex before.
97 17627 : aAccessGuard.clear();
98 17627 : if( bWaitFor )
99 : {
100 11746 : m_aBarrier.wait();
101 17627 : }
102 17627 : }
103 :
104 : /*-****************************************************************************************************
105 : @short get current working mode
106 : @descr If you stand in your close() or init() method ... but don't know
107 : if you called more than ones(!) ... you can use this function to get
108 : right information.
109 : e.g: You have a method init() which is used to change working mode from
110 : E_INIT to E_WORK and should be used to initialize some member too ...
111 : What should you do:
112 :
113 : void init( sal_Int32 nValue )
114 : {
115 : // Reject this call if our transaction manager say: "Object already initialized!"
116 : // Otherwise initialize your member.
117 : if( m_aTransactionManager.getWorkingMode() == E_INIT )
118 : {
119 : // Object is uninitialized ...
120 : // Make member access threadsafe!
121 : Guard aGuard( m_aMutex );
122 :
123 : // Check working mode again .. because another instance could be faster.
124 : // (It's possible to set this guard at first of this method too!)
125 : if( m_aTransactionManager.getWorkingMode() == E_INIT )
126 : {
127 : m_aMember = nValue;
128 :
129 : // Object is initialized now ... set working mode to E_WORK!
130 : m_aTransactionManager.setWorkingMode( E_WORK );
131 : }
132 : }
133 : }
134 :
135 : @seealso method setWorkingMode()
136 : @return Current set mode.
137 :
138 : @onerror No error should occur.
139 : *//*-*****************************************************************************************************/
140 0 : EWorkingMode TransactionManager::getWorkingMode() const
141 : {
142 : // Synchronize access to internal member!
143 0 : ::osl::MutexGuard aAccessLock( m_aAccessLock );
144 0 : return m_eWorkingMode;
145 : }
146 :
147 : /*-****************************************************************************************************
148 : @short start new transaction
149 : @descr A guard should use this method to start a new transaction. He should looks for rejected
150 : calls to by using parameter eMode and eReason.
151 : If call was not rejected your transaction will be non breakable during releasing your transaction
152 : guard! BUT ... your code isn't threadsafe then! It's a transaction manager only ....
153 :
154 : @seealso method unregisterTransaction()
155 :
156 : @param "eMode" ,used to enable/disable throwing exceptions automatically for rejected calls
157 : @param "eReason" ,reason for rejected calls
158 : *//*-*****************************************************************************************************/
159 1883223 : void TransactionManager::registerTransaction( EExceptionMode eMode, ERejectReason& eReason ) throw( css::uno::RuntimeException, css::lang::DisposedException )
160 : {
161 : // Look for rejected calls first.
162 : // If call was refused we throw some exceptions or do nothing!
163 : // It depends from given parameter eMode.
164 1883223 : if( isCallRejected( eReason ) )
165 : {
166 39227 : impl_throwExceptions( eMode, eReason );
167 : }
168 :
169 : // BUT if no exception was thrown ... (may be eMode = E_SOFTEXCEPTIONS!)
170 : // we must register this transaction too!
171 : // Don't use "else" or a new scope here!!!
172 :
173 : // Safe access to internal member.
174 1883206 : ::osl::MutexGuard aAccessGuard( m_aAccessLock );
175 :
176 : // Register this new transaction.
177 : // If it is the first one .. close gate to disable changing of working mode.
178 1883206 : ++m_nTransactionCount;
179 1883206 : if( m_nTransactionCount == 1 )
180 : {
181 1173882 : m_aBarrier.close();
182 1883206 : }
183 1883206 : }
184 :
185 : /*-****************************************************************************************************
186 : @short finish transaction
187 : @descr A guard should call this method to release current transaction.
188 :
189 : @seealso method registerTransaction()
190 : *//*-*****************************************************************************************************/
191 1883206 : void TransactionManager::unregisterTransaction() throw( css::uno::RuntimeException, css::lang::DisposedException )
192 : {
193 : // This call could not rejected!
194 : // Safe access to internal member.
195 1883206 : ::osl::MutexGuard aAccessGuard( m_aAccessLock );
196 :
197 : // Deregister this transaction.
198 : // If it was the last one ... open gate to enable changing of working mode!
199 : // (see setWorkingMode())
200 :
201 1883206 : --m_nTransactionCount;
202 1883206 : if( m_nTransactionCount == 0 )
203 : {
204 1173882 : m_aBarrier.open();
205 1883206 : }
206 1883206 : }
207 :
208 : /*-****************************************************************************************************
209 : @short look for rejected calls
210 : @descr Sometimes user need a possibility to get information about rejected calls
211 : without starting a transaction!
212 : @param "eReason" returns reason of a rejected call
213 : @return true if call was rejected, false otherwise
214 :
215 : @onerror We return false.
216 : *//*-*****************************************************************************************************/
217 1883223 : bool TransactionManager::isCallRejected( ERejectReason& eReason ) const
218 : {
219 : // This call must safe access to internal member only.
220 : // Set "possible reason" for return and check reject-state then!
221 : // User should look for return value first - reason then ...
222 1883223 : ::osl::MutexGuard aAccessGuard( m_aAccessLock );
223 1883223 : switch( m_eWorkingMode )
224 : {
225 39022 : case E_INIT : eReason = E_UNINITIALIZED;
226 39022 : break;
227 1843996 : case E_WORK : eReason = E_NOREASON;
228 1843996 : break;
229 188 : case E_BEFORECLOSE : eReason = E_INCLOSE;
230 188 : break;
231 17 : case E_CLOSE : eReason = E_CLOSED;
232 17 : break;
233 : }
234 1883223 : return( eReason!=E_NOREASON );
235 : }
236 :
237 : /*-****************************************************************************************************
238 : @short throw any exceptions for rejected calls
239 : @descr If a user wishes to use our automatic exception mode we use this impl-method.
240 : We check all combinations of eReason and eExceptionMode and throw correct exception with some
241 : descriptions for the recipient.
242 :
243 : @seealso method registerTransaction()
244 : @seealso enum ERejectReason
245 : @seealso enum EExceptionMode
246 :
247 : @param "eReason" , reason for rejected call
248 : @param "eMode" , exception mode - set by user
249 : *//*-*****************************************************************************************************/
250 39227 : void TransactionManager::impl_throwExceptions( EExceptionMode eMode, ERejectReason eReason ) const throw( css::uno::RuntimeException, css::lang::DisposedException )
251 : {
252 39227 : switch( eReason )
253 : {
254 39022 : case E_UNINITIALIZED : if( eMode == E_HARDEXCEPTIONS )
255 : {
256 : // Help programmer to find out, why this exception is thrown!
257 : SAL_WARN( "fwk", "TransactionManager...: Owner instance not correctly initialized yet. Call was rejected! Normally it's an algorithm error ... wrong use of class!" );
258 : //ATTENTION: temp. disabled - till all bad code positions are detected and changed! */
259 : // throw css::uno::RuntimeException( "TransactionManager...\nOwner instance not right initialized yet. Call was rejected! Normally it's an algorithm error ... wrong usin of class!\n", css::uno::Reference< css::uno::XInterface >() );
260 : }
261 39022 : break;
262 188 : case E_INCLOSE : if( eMode == E_HARDEXCEPTIONS )
263 : {
264 : // Help programmer to find out, why this exception is thrown!
265 : SAL_WARN( "fwk", "TransactionManager...: Owner instance stand in close method. Call was rejected!" );
266 0 : throw css::lang::DisposedException( "TransactionManager...\nOwner instance stand in close method. Call was rejected!" );
267 : }
268 188 : break;
269 : case E_CLOSED : {
270 : // Help programmer to find out, why this exception is thrown!
271 : SAL_WARN( "fwk", "TransactionManager...: Owner instance already closed. Call was rejected!" );
272 17 : throw css::lang::DisposedException( "TransactionManager...\nOwner instance already closed. Call was rejected!" );
273 : }
274 : case E_NOREASON : {
275 : // Help programmer to find out
276 : SAL_WARN( "fwk", "TransactionManager...: Impossible case E_NOREASON!" );
277 : }
278 0 : break;
279 : default:
280 : assert(false);
281 : }
282 39210 : }
283 :
284 : } // namespace framework
285 :
286 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
