Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #ifndef INCLUDED_SFX2_ITEMCONNECT_HXX
21 : #define INCLUDED_SFX2_ITEMCONNECT_HXX
22 :
23 : #include <sal/config.h>
24 : #include <sfx2/dllapi.h>
25 :
26 : #include <memory>
27 :
28 : #include <boost/scoped_ptr.hpp>
29 : #include <sfx2/itemwrapper.hxx>
30 : #include <sfx2/controlwrapper.hxx>
31 :
32 :
33 :
34 : namespace sfx {
35 :
36 :
37 :
38 : typedef int ItemConnFlags;
39 :
40 : /** No special state for the connection. */
41 : const ItemConnFlags ITEMCONN_NONE = 0x0000;
42 :
43 : /** Connection is inactive - virtual functions will not be called. */
44 : const ItemConnFlags ITEMCONN_INACTIVE = 0x0001;
45 :
46 : /** Enable control(s), if the item is known. */
47 : const ItemConnFlags ITEMCONN_ENABLE_KNOWN = 0x0010;
48 : /** Disable control(s), if the item is unknown. */
49 : const ItemConnFlags ITEMCONN_DISABLE_UNKNOWN = 0x0020;
50 : /** Show control(s), if the item is known. */
51 : const ItemConnFlags ITEMCONN_SHOW_KNOWN = 0x0040;
52 : /** Hide control(s), if the item is unknown. */
53 : const ItemConnFlags ITEMCONN_HIDE_UNKNOWN = 0x0080;
54 :
55 : /** Default value for constructors. */
56 : const ItemConnFlags ITEMCONN_DEFAULT = ITEMCONN_NONE;
57 :
58 :
59 : // Base connection classes
60 :
61 :
62 : /** A helper for SfxTabPages to connect controls to items.
63 :
64 : This is the base class of all control connection classes. Their purpose is
65 : to connect one or more controls from an SfxTabPage with an item from an
66 : item set. The goal is to omit any additional code in the virtual functions
67 : Reset() and FillItemSet() in classes derived from SfxTabPage.
68 :
69 : Examples of connections:
70 : - A check box with an SfxBoolItem,
71 : - A metric (spin) field with an SfxInt32Item.
72 : - A group of radio buttons with an SfxEnumItem.
73 :
74 : Each SfxTabPage will contain a list of connection objects (derived from
75 : this class). The connection objects remember the item and control(s) they
76 : have to work on. The SfxTabPage will call the DoApplyFlags(), DoReset(),
77 : and DoFillItemSet() functions of all connection objects it knows. The code
78 : to initialize control(s) from the item value and fill the item from
79 : control(s) has to be written only once for each control type.
80 :
81 : Additional flags passed in the constructor allow to control the behaviour
82 : of the control(s) if the item is supported/unsupported in the currently
83 : used item set. For example, it is possible to specify that a control will
84 : be disabled or hidden if the item is not supported. This is done before
85 : each call of Reset().
86 :
87 : The special flag ITEMCONN_CLONE_ITEM controls how to create new items in
88 : the DoFillItemSet() function. The standard (and faster) method is to create
89 : a temporary item on the stack and put it into the item set. But this does
90 : not work if the item set expects a special item type derived from a common
91 : item class, i.e. a Boolean item derived from SfxBoolItem providing special
92 : item representation text. As this code does not know the item type, the
93 : item cannot be created on the stack. For this case the flag specifies to
94 : use the virtual Clone() method of the pool default item. This will create
95 : an item of the correct type but can still be used in conjunction with i.e.
96 : the standard BoolItemWrapper.
97 :
98 : How to use the item connection feature:
99 :
100 : A) Single item <-> single control connection
101 :
102 : Example: An SfxBoolItem and a check box.
103 :
104 : A1) Create a new item wrapper class derived from the SingleItemWrapper
105 : template, or use the template directly, or use one of the
106 : predefined item wrappers. See documentation of the
107 : SingleItemWrapper template for details (itemwrapper.hxx).
108 : A2) Create a new control wrapper class derived from the
109 : SingleControlWrapper template and implement the abstract functions,
110 : or use one of the predefined control wrappers. See documentation of
111 : the SingleControlWrapper template for details (controlwrapper.hxx).
112 : A3) Create a new connection class derived from one of the following
113 : base classes, and implement the abstract functions, or use the
114 : ItemControlConnection template directly, or use one of the
115 : predefined connections.
116 : A4) Create connection objects in the constructor of the tab page, and
117 : insert them into the tab page with SfxTabPage::AddItemConnection().
118 : A5) Remove old code from the tab page's Reset() and FillItemSet()
119 : functions, if necessary.
120 :
121 : B) Single item <-> multiple controls connections
122 :
123 : B1) See step A1. If the item contains multiple values (and not a
124 : structure that contains all the values for the different controls),
125 : the best way is to use the IdentItemWrapper template, that works
126 : with the item itself. This way it is possible to provide a 'data
127 : type' that contains the values for all controls.
128 : B2) Create a new control wrapper class derived from the
129 : MultiControlWrapper template. Add single control wrapper members
130 : for all controls to this class and register them in the
131 : constructor, using the RegisterControlWrapper() function. Implement
132 : the abstract functions GetControlValue() and SetControlValue().
133 : These functions should call the respective functions of the own
134 : single control wrappers and either fill a new data object (the item
135 : itself in most cases, see step B1) with all the values from the
136 : controls, or fill all the controls from the data object.
137 : B3) Create a new connection class derived from ItemControlConnection,
138 : or use the ItemControlConnection template directly. The multiple
139 : control wrapper from step B2 acts like a single control, therefore
140 : it is possible to use the ItemControlConnection.
141 : B4) See steps A4 and A5.
142 :
143 : C) Multiple items <-> single control connections
144 :
145 : todo
146 :
147 : D) Multiple items <-> multiple controls connections
148 :
149 : todo
150 :
151 : The current tree of base classes/templates and standard connections:
152 :
153 : ItemConnectionBase
154 : |
155 : +- DummyItemConnection [1]
156 : |
157 : +- ItemControlConnection< ItemWrpT, ControlWrpT >
158 : | |
159 : | +- CheckBoxConnection [1]
160 : | |
161 : | +- NumericConnection< ItemWrpT > [1]
162 : | | |
163 : | | +- [ValueType]NumericConnection [1] [2]
164 : | |
165 : | +- MetricConnection< ItemWrpT > [1]
166 : | | |
167 : | | +- [ValueType]MetricConnection [1] [2]
168 : | |
169 : | +- ListBoxConnection< ItemWrpT > [1]
170 : | | |
171 : | | +- [ValueType]ListBoxConnection [1] [2]
172 : | |
173 : | +- ValueSetConnection< ItemWrpT > [1]
174 : | |
175 : | +- [ValueType]ValueSetConnection [1] [2]
176 : |
177 : +- ItemConnectionArray [1]
178 :
179 : Notes:
180 : [1] Standard connections ready to use.
181 : [2] [ValueType] is one of Int16, UInt16, Int32, UInt32.
182 : */
183 : class SFX2_DLLPUBLIC ItemConnectionBase
184 : {
185 : public:
186 : virtual ~ItemConnectionBase();
187 :
188 : /** Returns the flags passed in the constructor. */
189 : inline ItemConnFlags GetFlags() const { return mnFlags; }
190 :
191 : /** Returns true if this connection is active. */
192 : bool IsActive() const;
193 :
194 : /** Calls the virtual ApplyFlags() function, if connection is active. */
195 : void DoApplyFlags( const SfxItemSet& rItemSet );
196 : /** Calls the virtual Reset() function, if connection is active. */
197 : void DoReset( const SfxItemSet& rItemSet );
198 : /** Calls the virtual FillItemSet() function, if connection is active. */
199 : bool DoFillItemSet( SfxItemSet& rDestSet, const SfxItemSet& rOldSet );
200 :
201 : protected:
202 : explicit ItemConnectionBase( ItemConnFlags nFlags = ITEMCONN_DEFAULT );
203 :
204 : /** Derived classes implement actions according to current flags here. */
205 : virtual void ApplyFlags( const SfxItemSet& rItemSet ) = 0;
206 : /** Derived classes implement initializing controls from item sets here. */
207 : virtual void Reset( const SfxItemSet& rItemSet ) = 0;
208 : /** Derived classes implement filling item sets from controls here. */
209 : virtual bool FillItemSet( SfxItemSet& rDestSet, const SfxItemSet& rOldSet ) = 0;
210 :
211 : /** Returns whether to enable a control, according to current flags. */
212 : TriState GetEnableState( bool bKnown ) const;
213 : /** Returns whether to show a control, according to current flags. */
214 : TriState GetShowState( bool bKnown ) const;
215 :
216 : private:
217 : /* Disable copy c'tor and assignment. */
218 : ItemConnectionBase( const ItemConnectionBase& );
219 : ItemConnectionBase& operator=( const ItemConnectionBase& );
220 :
221 : ItemConnFlags mnFlags; /// Flags for additional options.
222 : };
223 :
224 :
225 :
226 : /** Base class template for single item <-> single control connection objects.
227 :
228 : This template uses functions provided by the SingleItemWrapper and the
229 : SingleControlWrapper template classes. The virtual functions ApplyFlags(),
230 : Reset(), and FillItemSet() are implemented here in a generic way using the
231 : virtual functions of the wrapper classes. Derived classes only have to
232 : create or otherwise provide appropriate wrappers.
233 : */
234 : template< typename ItemWrpT, typename ControlWrpT >
235 : class ItemControlConnection : public ItemConnectionBase
236 : {
237 : public:
238 : typedef ItemWrpT ItemWrapperType;
239 : typedef ControlWrpT ControlWrapperType;
240 : typedef ItemControlConnection< ItemWrpT, ControlWrpT > ItemControlConnectionType;
241 : typedef typename ItemWrpT::ItemType ItemType;
242 : typedef typename ItemWrpT::ItemValueType ItemValueType;
243 : typedef typename ControlWrpT::ControlType ControlType;
244 : typedef typename ControlWrpT::ControlValueType ControlValueType;
245 :
246 : typedef std::unique_ptr< ItemWrpT > ItemWrapperRef;
247 : typedef std::unique_ptr< ControlWrpT > ControlWrapperRef;
248 :
249 : /** Receives pointer to a newly created control wrapper.
250 : @descr Takes ownership of the control wrapper. */
251 : explicit ItemControlConnection( sal_uInt16 nSlot, ControlWrpT* pNewCtrlWrp,
252 : ItemConnFlags nFlags = ITEMCONN_DEFAULT );
253 :
254 : /** Convenience constructor. Receives reference to a control directly.
255 : @descr May only be used, if ControlWrpT::ControlWrpT( ControlType& )
256 : constructor exists. */
257 : explicit ItemControlConnection( sal_uInt16 nSlot, ControlType& rControl,
258 : ItemConnFlags nFlags = ITEMCONN_DEFAULT );
259 :
260 : virtual ~ItemControlConnection();
261 :
262 : protected:
263 : /** Actions according to current flags for the control. */
264 : virtual void ApplyFlags( const SfxItemSet& rItemSet ) SAL_OVERRIDE;
265 : /** Resets the control according to the item contents. */
266 : virtual void Reset( const SfxItemSet& rItemSet ) SAL_OVERRIDE;
267 : /** Fills the item set according to the control's state. */
268 : virtual bool FillItemSet( SfxItemSet& rDestSet, const SfxItemSet& rOldSet ) SAL_OVERRIDE;
269 :
270 : ItemWrapperType maItemWrp;
271 : ControlWrapperRef mxCtrlWrp;
272 : };
273 :
274 :
275 : // Standard connections
276 :
277 :
278 : /** This is a helper class to enable/disable/show/hide a control only.
279 :
280 : This class does nothing special in the Reset() and FillItemSet() functions.
281 : It can be used to control the visibility of i.e. fixed lines or fixed texts
282 : related to the availability of an item by passing the appropriate flags to
283 : the constructor of this connection.
284 : */
285 0 : class SFX2_DLLPUBLIC DummyItemConnection:
286 : public ItemConnectionBase, public DummyWindowWrapper
287 : {
288 : public:
289 : explicit DummyItemConnection( sal_uInt16 nSlot, vcl::Window& rWindow,
290 : ItemConnFlags nFlags = ITEMCONN_DEFAULT );
291 :
292 : protected:
293 : virtual void ApplyFlags( const SfxItemSet& rItemSet ) SAL_OVERRIDE;
294 : virtual void Reset( const SfxItemSet& rItemSet ) SAL_OVERRIDE;
295 : virtual bool FillItemSet( SfxItemSet& rDestSet, const SfxItemSet& rOldSet ) SAL_OVERRIDE;
296 :
297 : private:
298 : sal_uInt16 mnSlot;
299 : };
300 :
301 :
302 :
303 : /** Connection between an SfxBoolItem and a VCL CheckBox. */
304 : typedef ItemControlConnection< BoolItemWrapper, CheckBoxWrapper > CheckBoxConnection;
305 :
306 :
307 :
308 : /** Connection between an item and the VCL NumericField. */
309 : template< typename ItemWrpT >
310 : class NumericConnection : public ItemControlConnection< ItemWrpT,
311 : NumericFieldWrapper< typename ItemWrpT::ItemValueType > >
312 : {
313 : typedef ItemControlConnection< ItemWrpT,
314 : NumericFieldWrapper< typename ItemWrpT::ItemValueType > >
315 : ItemControlConnectionType;
316 :
317 : public:
318 : typedef typename ItemControlConnectionType::ControlWrapperType NumericFieldWrapperType;
319 :
320 : explicit NumericConnection( sal_uInt16 nSlot, NumericField& rField,
321 : ItemConnFlags nFlags = ITEMCONN_DEFAULT );
322 : };
323 :
324 :
325 :
326 : typedef NumericConnection< Int16ItemWrapper > Int16NumericConnection;
327 : typedef NumericConnection< UInt16ItemWrapper > UInt16NumericConnection;
328 : typedef NumericConnection< Int32ItemWrapper > Int32NumericConnection;
329 : typedef NumericConnection< UInt32ItemWrapper > UInt32NumericConnection;
330 :
331 :
332 :
333 : /** Connection between an item and the VCL MetricField.
334 :
335 : Adds support of different field units during control value <-> item value
336 : conversion. The field unit passed to the constructor applies for the item
337 : values, while the field unit used in the control has to be set at the
338 : control itself.
339 : */
340 : template< typename ItemWrpT >
341 0 : class MetricConnection : public ItemControlConnection< ItemWrpT,
342 : MetricFieldWrapper< typename ItemWrpT::ItemValueType > >
343 : {
344 : typedef ItemControlConnection< ItemWrpT,
345 : MetricFieldWrapper< typename ItemWrpT::ItemValueType > >
346 : ItemControlConnectionType;
347 :
348 : public:
349 : typedef typename ItemControlConnectionType::ControlWrapperType MetricFieldWrapperType;
350 :
351 : explicit MetricConnection( sal_uInt16 nSlot, MetricField& rField,
352 : FieldUnit eItemUnit = FUNIT_NONE, ItemConnFlags nFlags = ITEMCONN_DEFAULT );
353 : };
354 :
355 :
356 :
357 : typedef MetricConnection< Int16ItemWrapper > Int16MetricConnection;
358 : typedef MetricConnection< UInt16ItemWrapper > UInt16MetricConnection;
359 : typedef MetricConnection< Int32ItemWrapper > Int32MetricConnection;
360 : typedef MetricConnection< UInt32ItemWrapper > UInt32MetricConnection;
361 :
362 :
363 :
364 : /** Connection between an item and a VCL ListBox.
365 :
366 : Optionally a map can be passed that maps list box positions to item values.
367 : This map MUST be terminated with an entry containing
368 : WRAPPER_LISTBOX_ENTRY_NOTFOUND as list box position. The item value
369 : contained in this last entry is used as default item value in case of an
370 : error.
371 : */
372 : template< typename ItemWrpT >
373 0 : class ListBoxConnection : public ItemControlConnection< ItemWrpT,
374 : ListBoxWrapper< typename ItemWrpT::ItemValueType > >
375 : {
376 : typedef ItemControlConnection< ItemWrpT,
377 : ListBoxWrapper< typename ItemWrpT::ItemValueType > >
378 : ItemControlConnectionType;
379 :
380 : public:
381 : typedef typename ItemControlConnectionType::ControlWrapperType ListBoxWrapperType;
382 : typedef typename ListBoxWrapperType::MapEntryType MapEntryType;
383 :
384 : explicit ListBoxConnection( sal_uInt16 nSlot, ListBox& rListBox,
385 : const MapEntryType* pMap = 0, ItemConnFlags nFlags = ITEMCONN_DEFAULT );
386 : };
387 :
388 :
389 :
390 : typedef ListBoxConnection< Int16ItemWrapper > Int16ListBoxConnection;
391 : typedef ListBoxConnection< UInt16ItemWrapper > UInt16ListBoxConnection;
392 : typedef ListBoxConnection< Int32ItemWrapper > Int32ListBoxConnection;
393 : typedef ListBoxConnection< UInt32ItemWrapper > UInt32ListBoxConnection;
394 :
395 :
396 :
397 : /** Connection between an item and an SVTOOLS ValueSet.
398 :
399 : Optionally a map can be passed that maps value set identifiers to item
400 : values. This map MUST be terminated with an entry containing
401 : WRAPPER_VALUESET_ITEM_NOTFOUND as value set identifier. The item value
402 : contained in this last entry is used as default item value in case of an
403 : error.
404 : */
405 : template< typename ItemWrpT >
406 0 : class ValueSetConnection : public ItemControlConnection< ItemWrpT,
407 : ValueSetWrapper< typename ItemWrpT::ItemValueType > >
408 : {
409 : typedef ItemControlConnection< ItemWrpT,
410 : ValueSetWrapper< typename ItemWrpT::ItemValueType > >
411 : ItemControlConnectionType;
412 :
413 : public:
414 : typedef typename ItemControlConnectionType::ControlWrapperType ValueSetWrapperType;
415 : typedef typename ValueSetWrapperType::MapEntryType MapEntryType;
416 :
417 : explicit ValueSetConnection( sal_uInt16 nSlot, ValueSet& rValueSet,
418 : const MapEntryType* pMap = 0, ItemConnFlags nFlags = ITEMCONN_DEFAULT );
419 : };
420 :
421 :
422 :
423 : typedef ValueSetConnection< Int16ItemWrapper > Int16ValueSetConnection;
424 : typedef ValueSetConnection< UInt16ItemWrapper > UInt16ValueSetConnection;
425 : typedef ValueSetConnection< Int32ItemWrapper > Int32ValueSetConnection;
426 : typedef ValueSetConnection< UInt32ItemWrapper > UInt32ValueSetConnection;
427 :
428 :
429 : // Array of connections
430 :
431 :
432 : class ItemConnectionArrayImpl;
433 :
434 : /** A container of connection objects.
435 :
436 : This is a connection with the only purpose to contain other connection
437 : objects. This way it is possible to create a tree structure of connections
438 : for a convenient connection management. This class is used by the class
439 : SfxTabPage to store all connections.
440 : */
441 : class ItemConnectionArray : public ItemConnectionBase
442 : {
443 : public:
444 : explicit ItemConnectionArray();
445 : virtual ~ItemConnectionArray();
446 :
447 : /** Adds a new connection to the list.
448 : @descr Takes ownership of the connection! */
449 : void AddConnection( ItemConnectionBase* pConnection );
450 :
451 : protected:
452 : virtual void ApplyFlags( const SfxItemSet& rItemSet ) SAL_OVERRIDE;
453 : virtual void Reset( const SfxItemSet& rItemSet ) SAL_OVERRIDE;
454 : virtual bool FillItemSet( SfxItemSet& rDestSet, const SfxItemSet& rOldSet ) SAL_OVERRIDE;
455 :
456 : private:
457 : std::unique_ptr< ItemConnectionArrayImpl > mxImpl;
458 : };
459 :
460 :
461 :
462 :
463 : // *** Implementation of template functions ***
464 :
465 :
466 :
467 : // Base connection classes
468 :
469 :
470 : template< typename ItemWrpT, typename ControlWrpT >
471 0 : ItemControlConnection< ItemWrpT, ControlWrpT >::ItemControlConnection(
472 : sal_uInt16 nSlot, ControlWrpT* pNewCtrlWrp, ItemConnFlags nFlags ) :
473 : ItemConnectionBase( nFlags ),
474 : maItemWrp( nSlot ),
475 0 : mxCtrlWrp( pNewCtrlWrp )
476 : {
477 0 : }
478 :
479 : template< typename ItemWrpT, typename ControlWrpT >
480 0 : ItemControlConnection< ItemWrpT, ControlWrpT >::ItemControlConnection(
481 : sal_uInt16 nSlot, ControlType& rControl, ItemConnFlags nFlags ) :
482 : ItemConnectionBase( nFlags ),
483 : maItemWrp( nSlot ),
484 0 : mxCtrlWrp( new ControlWrpT( rControl ) )
485 : {
486 0 : }
487 :
488 : template< typename ItemWrpT, typename ControlWrpT >
489 0 : ItemControlConnection< ItemWrpT, ControlWrpT >::~ItemControlConnection()
490 : {
491 0 : }
492 :
493 : template< typename ItemWrpT, typename ControlWrpT >
494 0 : void ItemControlConnection< ItemWrpT, ControlWrpT >::ApplyFlags( const SfxItemSet& rItemSet )
495 : {
496 0 : bool bKnown = ItemWrapperHelper::IsKnownItem( rItemSet, maItemWrp.GetSlotId() );
497 0 : mxCtrlWrp->ModifyControl( GetEnableState( bKnown ), GetShowState( bKnown ) );
498 0 : }
499 :
500 : template< typename ItemWrpT, typename ControlWrpT >
501 0 : void ItemControlConnection< ItemWrpT, ControlWrpT >::Reset( const SfxItemSet& rItemSet )
502 : {
503 0 : const ItemType* pItem = maItemWrp.GetUniqueItem( rItemSet );
504 0 : mxCtrlWrp->SetControlDontKnow( pItem == 0 );
505 0 : if( pItem )
506 0 : mxCtrlWrp->SetControlValue( maItemWrp.GetItemValue( *pItem ) );
507 0 : }
508 :
509 : template< typename ItemWrpT, typename ControlWrpT >
510 0 : bool ItemControlConnection< ItemWrpT, ControlWrpT >::FillItemSet(
511 : SfxItemSet& rDestSet, const SfxItemSet& rOldSet )
512 : {
513 0 : const ItemType* pOldItem = maItemWrp.GetUniqueItem( rOldSet );
514 0 : bool bChanged = false;
515 0 : if( !mxCtrlWrp->IsControlDontKnow() )
516 : {
517 : // first store the control value in a local variable
518 0 : ControlValueType aCtrlValue( mxCtrlWrp->GetControlValue() );
519 : // convert to item value type -> possible to convert i.e. from 'T' to 'const T&'
520 0 : ItemValueType aNewValue( aCtrlValue );
521 : // do not rely on existence of ItemValueType::operator!=
522 0 : if( !pOldItem || !(maItemWrp.GetItemValue( *pOldItem ) == aNewValue) )
523 : {
524 0 : sal_uInt16 nWhich = ItemWrapperHelper::GetWhichId( rDestSet, maItemWrp.GetSlotId() );
525 : boost::scoped_ptr< ItemType > xItem(
526 0 : static_cast< ItemType* >( maItemWrp.GetDefaultItem( rDestSet ).Clone() ) );
527 0 : xItem->SetWhich( nWhich );
528 0 : maItemWrp.SetItemValue( *xItem, aNewValue );
529 0 : rDestSet.Put( *xItem );
530 0 : bChanged = true;
531 0 : }
532 : }
533 0 : if( !bChanged )
534 0 : ItemWrapperHelper::RemoveDefaultItem( rDestSet, rOldSet, maItemWrp.GetSlotId() );
535 0 : return bChanged;
536 : }
537 :
538 :
539 : // Standard connections
540 :
541 :
542 : template< typename ItemWrpT >
543 : NumericConnection< ItemWrpT >::NumericConnection(
544 : sal_uInt16 nSlot, NumericField& rField, ItemConnFlags nFlags ) :
545 : ItemControlConnectionType( nSlot, rField, nFlags )
546 : {
547 : }
548 :
549 :
550 :
551 : template< typename ItemWrpT >
552 0 : MetricConnection< ItemWrpT >::MetricConnection(
553 : sal_uInt16 nSlot, MetricField& rField, FieldUnit eItemUnit, ItemConnFlags nFlags ) :
554 0 : ItemControlConnectionType( nSlot, new MetricFieldWrapperType( rField, eItemUnit ), nFlags )
555 : {
556 0 : }
557 :
558 :
559 :
560 : template< typename ItemWrpT >
561 0 : ListBoxConnection< ItemWrpT >::ListBoxConnection(
562 : sal_uInt16 nSlot, ListBox& rListBox, const MapEntryType* pMap, ItemConnFlags nFlags ) :
563 0 : ItemControlConnectionType( nSlot, new ListBoxWrapperType( rListBox, pMap ), nFlags )
564 : {
565 0 : }
566 :
567 :
568 :
569 : template< typename ItemWrpT >
570 0 : ValueSetConnection< ItemWrpT >::ValueSetConnection(
571 : sal_uInt16 nSlot, ValueSet& rValueSet, const MapEntryType* pMap, ItemConnFlags nFlags ) :
572 0 : ItemControlConnectionType( nSlot, new ValueSetWrapperType( rValueSet, pMap ), nFlags )
573 : {
574 0 : }
575 :
576 :
577 :
578 : } // namespace sfx
579 :
580 : #endif
581 :
582 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
