Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #ifndef INCLUDED_SVX_SVDPAGE_HXX
21 : #define INCLUDED_SVX_SVDPAGE_HXX
22 :
23 : #include <svl/stylesheetuser.hxx>
24 : #include <vcl/bitmap.hxx>
25 : #include <vcl/print.hxx>
26 : #include <vcl/gdimtf.hxx>
27 : #include <tools/weakbase.hxx>
28 : #include <tools/contnr.hxx>
29 : #include <cppuhelper/weakref.hxx>
30 : #include <svx/svdtypes.hxx>
31 : #include <svx/svdlayer.hxx>
32 : #include <vector>
33 : #include <svx/sdrpageuser.hxx>
34 : #include <svx/sdr/contact/viewobjectcontactredirector.hxx>
35 : #include <svx/sdrmasterpagedescriptor.hxx>
36 : #include <svx/svxdllapi.h>
37 : #include <com/sun/star/container/XIndexAccess.hpp>
38 : #include <com/sun/star/drawing/XDrawPage.hpp>
39 : #include <svx/svdobj.hxx>
40 : #include <boost/scoped_ptr.hpp>
41 :
42 :
43 : // predefines
44 :
45 : namespace reportdesign { class OSection; }
46 : namespace sdr { namespace contact { class ViewContact; }}
47 : class SdrPage;
48 : class SdrModel;
49 : class SfxItemPool;
50 : class SdrPageView;
51 : class SdrLayerAdmin;
52 : class SetOfByte;
53 : class Color;
54 : class SfxStyleSheet;
55 : class SvxUnoDrawPagesAccess;
56 :
57 : enum SdrInsertReasonKind {SDRREASON_UNKNOWN, // unbekannt
58 : SDRREASON_STREAMING, // einlesen eines Doks
59 : SDRREASON_UNDO, // kommt aus dem Undo
60 : SDRREASON_COPY, // irgendjemand kopiert...
61 : SDRREASON_VIEWCREATE, // vom Anwender interaktiv erzeugt
62 : SDRREASON_VIEWCALL}; // Durch SdrView::Group(), ...
63 :
64 : class SdrInsertReason {
65 : const SdrObject* pRefObj;
66 : SdrInsertReasonKind eReason;
67 : public:
68 : SdrInsertReason(): pRefObj(NULL),eReason(SDRREASON_UNKNOWN) {}
69 574 : SdrInsertReason(SdrInsertReasonKind eR,const SdrObject* pO=NULL): pRefObj(pO),eReason(eR) {}
70 : void SetReferenceObject(const SdrObject* pO) { pRefObj=pO; }
71 : const SdrObject* GetReferenceObject() const { return pRefObj; }
72 : void SetReason(SdrInsertReasonKind eR) { eReason=eR; }
73 252 : SdrInsertReasonKind GetReason() const { return eReason; }
74 : };
75 :
76 :
77 : // class SdrObjList
78 :
79 : class SVX_DLLPUBLIC SdrObjList
80 : {
81 : private:
82 : typedef ::std::vector<SdrObject*> SdrObjectContainerType;
83 : SdrObjectContainerType maList;
84 :
85 : protected:
86 : friend class SdrObjListIter;
87 : friend class SdrEditView;
88 : SdrObjList* pUpList; // Vaterliste
89 : SdrModel* pModel; // Diese Liste gehoert zu diesem Model (Layer,ItemPool,Storage).
90 : SdrPage* pPage; // Page, in die Liste haengt. Kann auch this sein.
91 : SdrObject* pOwnerObj; // OwnerObject, falls Liste eines GruppenObjekts.
92 : Rectangle aOutRect;
93 : Rectangle aSnapRect;
94 : SdrObjListKind eListKind;
95 : bool bObjOrdNumsDirty;
96 : bool bRectsDirty;
97 : protected:
98 : virtual void RecalcRects();
99 :
100 : private:
101 : /// simple ActionChildInserted forwarder to have it on a central place
102 : void impChildInserted(SdrObject& rChild) const;
103 : public:
104 : TYPEINFO();
105 : SdrObjList(SdrModel* pNewModel, SdrPage* pNewPage, SdrObjList* pNewUpList=NULL);
106 : SdrObjList(const SdrObjList& rSrcList);
107 : virtual ~SdrObjList();
108 : // !!! Diese Methode nur fuer Leute, die ganz genau wissen was sie tun !!!
109 :
110 : // #110094# This should not be needed (!)
111 : void SetObjOrdNumsDirty() { bObjOrdNumsDirty=true; }
112 : // pModel, pPage, pUpList und pOwnerObj werden Zuweisungeoperator nicht veraendert!
113 : void operator=(const SdrObjList& rSrcList);
114 : void CopyObjects(const SdrObjList& rSrcList);
115 : // alles Aufraeumen (ohne Undo)
116 : void Clear();
117 984715 : SdrObjListKind GetListKind() const { return eListKind; }
118 28831 : void SetListKind(SdrObjListKind eNewKind) { eListKind=eNewKind; }
119 0 : SdrObjList* GetUpList() const { return pUpList; }
120 36453 : void SetUpList(SdrObjList* pNewUpList) { pUpList=pNewUpList; }
121 3132484 : SdrObject* GetOwnerObj() const { return pOwnerObj; }
122 28831 : void SetOwnerObj(SdrObject* pNewOwner) { pOwnerObj=pNewOwner; }
123 : virtual SdrPage* GetPage() const;
124 : virtual void SetPage(SdrPage* pNewPage);
125 : virtual SdrModel* GetModel() const;
126 : virtual void SetModel(SdrModel* pNewModel);
127 : // Neuberechnung der Objekt-Ordnungsnummern
128 : void RecalcObjOrdNums();
129 82479 : bool IsObjOrdNumsDirty() const { return bObjOrdNumsDirty; }
130 : virtual void NbcInsertObject(SdrObject* pObj, size_t nPos=SAL_MAX_SIZE
131 : , const SdrInsertReason* pReason=NULL
132 : );
133 : virtual void InsertObject(SdrObject* pObj, size_t nPos=SAL_MAX_SIZE
134 : , const SdrInsertReason* pReason=NULL
135 : );
136 : // aus Liste entfernen ohne delete
137 : virtual SdrObject* NbcRemoveObject(size_t nObjNum);
138 : virtual SdrObject* RemoveObject(size_t nObjNum);
139 : // Vorhandenes Objekt durch ein anderes ersetzen.
140 : // Wie Remove&Insert jedoch performanter, da die Ordnungsnummern
141 : // nicht Dirty gesetzt werden muessen.
142 : virtual SdrObject* NbcReplaceObject(SdrObject* pNewObj, size_t nObjNum);
143 : virtual SdrObject* ReplaceObject(SdrObject* pNewObj, size_t nObjNum);
144 : // Die Z-Order eines Objekts veraendern
145 : virtual SdrObject* NbcSetObjectOrdNum(size_t nOldObjNum, size_t nNewObjNum);
146 : virtual SdrObject* SetObjectOrdNum(size_t nOldObjNum, size_t nNewObjNum);
147 :
148 : virtual void SetRectsDirty();
149 :
150 : const Rectangle& GetAllObjSnapRect() const;
151 : const Rectangle& GetAllObjBoundRect() const;
152 :
153 : // Alle Textobjekte neu formatieren, z.B. bei Druckerwechsel
154 : void NbcReformatAllTextObjects();
155 : void ReformatAllTextObjects();
156 :
157 : /** #103122# reformats all edge objects that are connected to other objects */
158 : void ReformatAllEdgeObjects();
159 :
160 : // Die Vorlagenattribute der Zeichenobjekte in harte Attribute verwandeln.
161 : void BurnInStyleSheetAttributes();
162 :
163 : size_t GetObjCount() const;
164 : SdrObject* GetObj(size_t nNum) const;
165 :
166 : // Gelinkte Seite oder gelinktes Gruppenobjekt
167 : virtual bool IsReadOnly() const;
168 :
169 : // Zaehlt alle Objekte inkl. Objekte in Objektgruppen, ...
170 : size_t CountAllObjects() const;
171 :
172 : // Alle aufgelagerten Teile (z.B. Grafiken) der Liste in den
173 : // Speicher laden.
174 : void ForceSwapInObjects() const;
175 : void ForceSwapOutObjects() const;
176 :
177 : void SwapInAll() const { ForceSwapInObjects(); }
178 : void SwapOutAll() const { ForceSwapOutObjects(); }
179 :
180 : /** Makes the object list flat, i.e. the object list content are
181 : then tree leaves
182 :
183 : This method travels recursively over all group objects in this
184 : list, extracts the content, inserts it flat to the list and
185 : removes the group object afterwards.
186 : */
187 : virtual void FlattenGroups();
188 : /** Ungroup the object at the given index
189 :
190 : This method ungroups the content of the group object at the
191 : given index, i.e. the content is put flat into the object list
192 : (if the object at the given index is no group, this method is
193 : a no-op). If the group itself contains group objects, the
194 : operation is performed recursively, such that the content of
195 : the given object contains no groups afterwards.
196 : */
197 : virtual void UnGroupObj( size_t nObjNum );
198 :
199 : /** Return whether there is an explicit, user defined, object navigation
200 : order. When there is one this method returns <TRUE/> and the
201 : GetObjectForNavigationPosition() and
202 : SdrObject::GetNavigationPosition() methods will return values
203 : different from those returne by SdrObject::GetOrdNum() and
204 : GetObj().
205 : */
206 : bool HasObjectNavigationOrder (void) const;
207 :
208 : /** Set the navigation position of the given object to the specified
209 : value. Note that this changes the navigation position for all
210 : objects on or following the old or new position.
211 : */
212 : void SetObjectNavigationPosition (
213 : SdrObject& rObject,
214 : const sal_uInt32 nNewNavigationPosition);
215 :
216 : /** Return the object for the given navigation position. When there is
217 : a user defined navigation order, i.e. mpNavigationOrder is not NULL,
218 : then that is used to look up the object. Otherwise the z-order is
219 : used by looking up the object in maList.
220 : @param nNavigationPosition
221 : Valid values include 0 and are smaller than the number of
222 : objects as returned by GetObjCount().
223 : @return
224 : The returned pointer is NULL for invalid positions.
225 : */
226 : SdrObject* GetObjectForNavigationPosition (const sal_uInt32 nNavigationPosition) const;
227 :
228 : /** Restore the navigation order to that defined by the z-order.
229 : */
230 : void ClearObjectNavigationOrder (void);
231 :
232 : /** Set the navigation position of all SdrObjects to their position in
233 : the mpNavigationOrder list. This method returns immediately when no
234 : update is necessary.
235 : @return
236 : This method returns <TRUE/> when the navigation positions stored
237 : in SdrObjects are up to date.
238 : It returns <FALSE/> when the navigation positions are not valid,
239 : for example because no explicit navigation order has been
240 : defined, i.e. HasObjectNavigationOrder() would return <FALSE/>.
241 : */
242 : bool RecalcNavigationPositions (void);
243 :
244 : /** Set the navigation order to the one defined by the given list of
245 : XShape objects.
246 : @param rxOrder
247 : When this is an empty reference then the navigation order is
248 : reset to the z-order. The preferred way to do this, however, is
249 : to call ClearObjectNavigationOrder().
250 : Otherwise this list is expected to contain all the shapes in the
251 : called SdrObjList.
252 : */
253 : void SetNavigationOrder (const ::com::sun::star::uno::Reference<
254 : ::com::sun::star::container::XIndexAccess>& rxOrder);
255 :
256 : private:
257 : class WeakSdrObjectContainerType;
258 : /// This list, if it exists, defines the navigation order. It it does
259 : /// not exist then maList defines the navigation order.
260 : ::boost::scoped_ptr<WeakSdrObjectContainerType> mpNavigationOrder;
261 :
262 : /// This flag is <TRUE/> when the mpNavigation list has been changed but
263 : /// the indices of the referenced SdrObjects still have their old values.
264 : bool mbIsNavigationOrderDirty;
265 :
266 : /** Insert an SdrObject into maList. Do not modify the maList member
267 : directly.
268 : @param rObject
269 : The object to insert into the object list.
270 : @param nInsertPosition
271 : The given object is inserted before the object at this
272 : position. Valid values include 0 (the object is inserted at the
273 : head of the list) and the number of objects in the list as
274 : returned by GetObjCount() (the object is inserted at the end of
275 : the list.)
276 : */
277 : void InsertObjectIntoContainer (
278 : SdrObject& rObject,
279 : const sal_uInt32 nInsertPosition);
280 :
281 : /** Replace an object in the object list.
282 : @param rObject
283 : The new object that replaces the one in the list at the
284 : specified position.
285 : @param nObjectPosition
286 : The object at this position in the object list is replaced by
287 : the given object. Valid values include 0 and are smaller than
288 : the number of objects in the list.
289 : */
290 : void ReplaceObjectInContainer (
291 : SdrObject& rObject,
292 : const sal_uInt32 nObjectPosition);
293 :
294 : /** Remove an object from the object list.
295 : The object list has to contain at least one element.
296 : @param nObjectPosition
297 : The object at this position is removed from the object list.
298 : Valid values include 0 and are smaller than the number of
299 : objects in the list.
300 : */
301 : void RemoveObjectFromContainer (
302 : const sal_uInt32 nObjectPosition);
303 : };
304 :
305 : /*
306 : Eine Sdraw-Seite enthaelt genau eine Objektliste sowie eine Beschreibung
307 : der physikalischen Seitendimensionen (Groesse/Raender). Letzteres wird
308 : lediglich zum Fangen von Objekten beim Draggen benoetigt.
309 : An der Seite lassen sich (ueber SdrObjList) Objekte einfuegen und loeschen,
310 : nach vorn und nach hinten stellen. Ausserdem kann die Ordnungszahl eines
311 : Objektes abgefragt sowie direkt gesetzt werden.
312 : */
313 :
314 : // Used for all methods which return a page number
315 : #define SDRPAGE_NOTFOUND 0xFFFF
316 :
317 :
318 : // class SdrPageGridFrame
319 :
320 : // Fuer das Fangraster/Punkgitter im Writer
321 : class SdrPageGridFrame
322 : {
323 : Rectangle aPaper;
324 : Rectangle aUserArea;
325 : public:
326 : SdrPageGridFrame(const Rectangle& rPaper): aPaper(rPaper), aUserArea(rPaper) {}
327 16 : SdrPageGridFrame(const Rectangle& rPaper, const Rectangle& rUser): aPaper(rPaper), aUserArea(rUser) {}
328 : void SetPaperRect(const Rectangle& rPaper) { aPaper=rPaper; }
329 : void SetUserArea(const Rectangle& rUser) { aUserArea=rUser; }
330 48 : const Rectangle& GetPaperRect() const { return aPaper; }
331 80 : const Rectangle& GetUserArea() const { return aUserArea; }
332 : };
333 :
334 : class SVX_DLLPUBLIC SdrPageGridFrameList {
335 : std::vector<SdrPageGridFrame*> aList;
336 : private:
337 : SVX_DLLPRIVATE SdrPageGridFrameList(const SdrPageGridFrameList& rSrcList); // never implemented
338 : SVX_DLLPRIVATE void operator=(const SdrPageGridFrameList& rSrcList); // never implemented
339 : protected:
340 32 : SdrPageGridFrame* GetObject(sal_uInt16 i) const { return aList[i]; }
341 : public:
342 2 : SdrPageGridFrameList(): aList() {}
343 2 : ~SdrPageGridFrameList() { Clear(); }
344 : void Clear();
345 32 : sal_uInt16 GetCount() const { return sal_uInt16(aList.size()); }
346 16 : void Insert(const SdrPageGridFrame& rGF) { aList.push_back(new SdrPageGridFrame(rGF)); }
347 : void Insert(const SdrPageGridFrame& rGF, sal_uInt16 nPos)
348 : {
349 : if(nPos==0xFFFF)
350 : aList.push_back(new SdrPageGridFrame(rGF));
351 : else
352 : aList.insert(aList.begin()+nPos,new SdrPageGridFrame(rGF));
353 : }
354 : void Delete(sal_uInt16 nPos)
355 : {
356 : SdrPageGridFrame* p = aList[nPos];
357 : aList.erase(aList.begin()+nPos);
358 : delete p;
359 : }
360 : void Move(sal_uInt16 nPos, sal_uInt16 nNewPos)
361 : {
362 : SdrPageGridFrame* p = aList[nPos];
363 : aList.erase(aList.begin()+nPos);
364 : aList.insert(aList.begin()+nNewPos,p);
365 : }
366 : SdrPageGridFrame& operator[](sal_uInt16 nPos) { return *GetObject(nPos); }
367 16 : const SdrPageGridFrame& operator[](sal_uInt16 nPos) const { return *GetObject(nPos); }
368 : };
369 :
370 :
371 : // class SdrPageProperties
372 :
373 : class SVX_DLLPUBLIC SdrPageProperties : public SfxListener, public svl::StyleSheetUser
374 : {
375 : private:
376 : // data
377 : SdrPage* mpSdrPage;
378 : SfxStyleSheet* mpStyleSheet;
379 : SfxItemSet* mpProperties;
380 :
381 : // internal helpers
382 : void ImpRemoveStyleSheet();
383 : void ImpAddStyleSheet(SfxStyleSheet& rNewStyleSheet);
384 :
385 : // not implemented
386 : SdrPageProperties& operator=(const SdrPageProperties& rCandidate);
387 :
388 : public:
389 : // construct/destruct
390 : SdrPageProperties(SdrPage& rSdrPage);
391 : virtual ~SdrPageProperties();
392 :
393 : // Notify(...) from baseclass SfxListener
394 : virtual void Notify(SfxBroadcaster& rBC, const SfxHint& rHint) SAL_OVERRIDE;
395 :
396 : virtual bool isUsedByModel() const SAL_OVERRIDE;
397 :
398 : // data read/write
399 18625 : const SfxItemSet& GetItemSet() const { return *mpProperties;}
400 : void PutItemSet(const SfxItemSet& rSet);
401 : void PutItem(const SfxPoolItem& rItem);
402 : void ClearItem(const sal_uInt16 nWhich = 0);
403 :
404 : // StyleSheet access
405 : void SetStyleSheet(SfxStyleSheet* pStyleSheet);
406 1372 : SfxStyleSheet* GetStyleSheet() const { return mpStyleSheet;}
407 : };
408 :
409 :
410 : // class SdrPage
411 :
412 : class SVX_DLLPUBLIC SdrPage : public SdrObjList, public tools::WeakBase< SdrPage >
413 : {
414 :
415 : // start PageUser section
416 : private:
417 : // #111111# PageUser section
418 : sdr::PageUserVector maPageUsers;
419 :
420 : public:
421 : void AddPageUser(sdr::PageUser& rNewUser);
422 : void RemovePageUser(sdr::PageUser& rOldUser);
423 :
424 :
425 : // end PageUser section
426 :
427 :
428 : // #110094# DrawContact section
429 : private:
430 : sdr::contact::ViewContact* mpViewContact;
431 : protected:
432 : virtual sdr::contact::ViewContact* CreateObjectSpecificViewContact();
433 : public:
434 : sdr::contact::ViewContact& GetViewContact() const;
435 :
436 : // #110094# DrawContact support: Methods for handling Page changes
437 : void ActionChanged() const;
438 :
439 : // #i9076#
440 : friend class SdrModel;
441 : friend class SvxUnoDrawPagesAccess;
442 :
443 : // this class uses its own UNO wrapper
444 : // and thus has to set mxUnoPage (it also relies on mxUnoPage not being WeakRef)
445 : friend class reportdesign::OSection;
446 :
447 : sal_Int32 nWdt; // Seitengroesse
448 : sal_Int32 nHgt; // Seitengroesse
449 : sal_Int32 nBordLft; // Seitenrand links
450 : sal_Int32 nBordUpp; // Seitenrand oben
451 : sal_Int32 nBordRgt; // Seitenrand rechts
452 : sal_Int32 nBordLwr; // Seitenrand unten
453 :
454 : protected:
455 : SdrLayerAdmin* pLayerAdmin;
456 : private:
457 : SdrPageProperties* mpSdrPageProperties;
458 : ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > mxUnoPage;
459 :
460 : public:
461 17311 : SdrPageProperties& getSdrPageProperties() { return *mpSdrPageProperties; }
462 4552 : const SdrPageProperties& getSdrPageProperties() const { return *mpSdrPageProperties; }
463 : const SdrPageProperties* getCorrectSdrPageProperties() const;
464 :
465 : protected:
466 : // new MasterPageDescriptorVector
467 : ::sdr::MasterPageDescriptor* mpMasterPageDescriptor;
468 :
469 : SetOfByte aPrefVisiLayers;
470 : sal_uInt16 nPageNum;
471 :
472 : // bitfield
473 : bool mbMaster : 1; // flag if this is a MasterPage
474 : bool mbInserted : 1;
475 : bool mbObjectsNotPersistent : 1;
476 : bool mbSwappingLocked : 1;
477 :
478 : // #i93597#
479 : bool mbPageBorderOnlyLeftRight : 1;
480 :
481 : void SetUnoPage(::com::sun::star::uno::Reference<
482 : ::com::sun::star::drawing::XDrawPage> const&);
483 : virtual ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > createUnoPage();
484 :
485 : public:
486 : TYPEINFO_OVERRIDE();
487 : SdrPage(SdrModel& rNewModel, bool bMasterPage=false);
488 : // Copy-Ctor und Zuweisungeoperator sind nicht getestet!
489 : SdrPage(const SdrPage& rSrcPage);
490 : virtual ~SdrPage();
491 : // pModel, pPage, pUpList, pOwnerObj und mbInserted werden Zuweisungeoperator nicht veraendert!
492 : SdrPage& operator=(const SdrPage& rSrcPage);
493 : virtual SdrPage* Clone() const;
494 : virtual SdrPage* Clone(SdrModel* pNewModel) const;
495 80681 : bool IsMasterPage() const { return mbMaster; }
496 : void SetInserted(bool bNew = true);
497 13355 : bool IsInserted() const { return mbInserted; }
498 : virtual void SetChanged();
499 :
500 : // #i68775# React on PageNum changes (from Model in most cases)
501 : void SetPageNum(sal_uInt16 nNew);
502 : sal_uInt16 GetPageNum() const;
503 :
504 : // #i93597# Allow page border definition to not be the full rectangle but to
505 : // use only the left and right vertical edges (reportdesigner)
506 0 : void setPageBorderOnlyLeftRight(bool bNew) { mbPageBorderOnlyLeftRight = bNew; }
507 1941 : bool getPageBorderOnlyLeftRight() const { return mbPageBorderOnlyLeftRight; }
508 :
509 : virtual void SetSize(const Size& aSiz);
510 : virtual Size GetSize() const;
511 : virtual void SetOrientation(Orientation eOri);
512 : virtual Orientation GetOrientation() const;
513 : virtual sal_Int32 GetWdt() const;
514 : virtual sal_Int32 GetHgt() const;
515 : virtual void SetBorder(sal_Int32 nLft, sal_Int32 nUpp, sal_Int32 nRgt, sal_Int32 Lwr);
516 : virtual void SetLftBorder(sal_Int32 nBorder);
517 : virtual void SetUppBorder(sal_Int32 nBorder);
518 : virtual void SetRgtBorder(sal_Int32 nBorder);
519 : virtual void SetLwrBorder(sal_Int32 nBorder);
520 : virtual sal_Int32 GetLftBorder() const;
521 : virtual sal_Int32 GetUppBorder() const;
522 : virtual sal_Int32 GetRgtBorder() const;
523 : virtual sal_Int32 GetLwrBorder() const;
524 :
525 : virtual void SetModel(SdrModel* pNewModel) SAL_OVERRIDE;
526 :
527 : // New MasterPage interface
528 134552 : bool TRG_HasMasterPage() const { return (0L != mpMasterPageDescriptor); }
529 : void TRG_SetMasterPage(SdrPage& rNew);
530 : void TRG_ClearMasterPage();
531 : SdrPage& TRG_GetMasterPage() const;
532 : const SetOfByte& TRG_GetMasterPageVisibleLayers() const;
533 : void TRG_SetMasterPageVisibleLayers(const SetOfByte& rNew);
534 : sdr::contact::ViewContact& TRG_GetMasterPageDescriptorViewContact() const;
535 :
536 : protected:
537 : void TRG_ImpMasterPageRemoved(const SdrPage& rRemovedPage);
538 : public:
539 :
540 : // Aenderungen an den Layern setzen nicht das Modified-Flag !
541 0 : const SdrLayerAdmin& GetLayerAdmin() const { return *pLayerAdmin; }
542 34768 : SdrLayerAdmin& GetLayerAdmin() { return *pLayerAdmin; }
543 :
544 : virtual OUString GetLayoutName() const;
545 :
546 : // fuer's Raster im Writer, auch fuer AlignObjects wenn 1 Objekt markiert ist
547 : // wenn pRect!=NULL, dann die Seiten, die von diesem Rect intersected werden
548 : // ansonsten die sichtbaren Seiten.
549 : virtual const SdrPageGridFrameList* GetGridFrameList(const SdrPageView* pPV, const Rectangle* pRect) const;
550 : bool IsObjectsNotPersistent() const { return mbObjectsNotPersistent; }
551 : void SetObjectsNotPersistent(bool b) { mbObjectsNotPersistent = b; }
552 : // Durch Setzen dieses Flags, kann das Auslagern (Swappen) von
553 : // Teilen der Page (z.B. Grafiken) unterbunden werden.
554 : // Es werden hierdurch jedoch nicht automatisch alle ausgelagerten
555 : // Teile nachgeladen, dies geschieht erst bei konkretem Bedarf oder
556 : // durch Aufruf von SwapInAll().
557 : // Fuer die MasterPage(s) der Page muss dies ggf. separat gemacht werden.
558 : bool IsSwappingLocked() const { return mbSwappingLocked; }
559 : void SetSwappingLocked(bool bLock) { mbSwappingLocked = bLock; }
560 :
561 : ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > getUnoPage();
562 :
563 : virtual SfxStyleSheet* GetTextStyleSheetForObject( SdrObject* pObj ) const;
564 :
565 : /** *deprecated* returns an averaged background color of this page */
566 : // #i75566# GetBackgroundColor -> GetPageBackgroundColor
567 : Color GetPageBackgroundColor() const;
568 :
569 : /** *deprecated* returns an averaged background color of this page */
570 : // #i75566# GetBackgroundColor -> GetPageBackgroundColor and bScreenDisplay hint value
571 : Color GetPageBackgroundColor( SdrPageView* pView, bool bScreenDisplay = true) const;
572 :
573 : /** this method returns true if the object from the ViewObjectContact should
574 : be visible on this page while rendering.
575 : bEdit selects if visibility test is for an editing view or a final render,
576 : like printing.
577 : */
578 : virtual bool checkVisibility(
579 : const sdr::contact::ViewObjectContact& rOriginal,
580 : const sdr::contact::DisplayInfo& rDisplayInfo,
581 : bool bEdit );
582 : };
583 :
584 : typedef tools::WeakReference< SdrPage > SdrPageWeakRef;
585 :
586 :
587 : // use new redirector instead of pPaintProc
588 :
589 : class SVX_DLLPUBLIC StandardCheckVisisbilityRedirector : public ::sdr::contact::ViewObjectContactRedirector
590 : {
591 : public:
592 : StandardCheckVisisbilityRedirector();
593 : virtual ~StandardCheckVisisbilityRedirector();
594 :
595 : // all default implementations just call the same methods at the original. To do something
596 : // different, overload the method and at least do what the method does.
597 : virtual drawinglayer::primitive2d::Primitive2DSequence createRedirectedPrimitive2DSequence(
598 : const sdr::contact::ViewObjectContact& rOriginal,
599 : const sdr::contact::DisplayInfo& rDisplayInfo) SAL_OVERRIDE;
600 : };
601 :
602 :
603 :
604 : #endif // INCLUDED_SVX_SVDPAGE_HXX
605 :
606 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
