Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "fuconrec.hxx"
21 : #include "tabvwsh.hxx"
22 : #include "sc.hrc"
23 : #include "drawview.hxx"
24 :
25 : #include <editeng/outlobj.hxx>
26 : // Create default drawing objects via keyboard
27 : #include <svx/svdopath.hxx>
28 : #include <svx/svdocapt.hxx>
29 : #include <basegfx/polygon/b2dpolygon.hxx>
30 : #include <basegfx/point/b2dpoint.hxx>
31 :
32 : #include "scresid.hxx"
33 :
34 : /*************************************************************************
35 : |*
36 : |* Konstruktor
37 : |*
38 : \************************************************************************/
39 :
40 0 : FuConstRectangle::FuConstRectangle(ScTabViewShell* pViewSh, vcl::Window* pWin, ScDrawView* pViewP,
41 : SdrModel* pDoc, SfxRequest& rReq)
42 0 : : FuConstruct(pViewSh, pWin, pViewP, pDoc, rReq)
43 : {
44 0 : }
45 :
46 : /*************************************************************************
47 : |*
48 : |* Destruktor
49 : |*
50 : \************************************************************************/
51 :
52 0 : FuConstRectangle::~FuConstRectangle()
53 : {
54 0 : }
55 :
56 : /*************************************************************************
57 : |*
58 : |* MouseButtonDown-event
59 : |*
60 : \************************************************************************/
61 :
62 0 : bool FuConstRectangle::MouseButtonDown(const MouseEvent& rMEvt)
63 : {
64 : // remember button state for creation of own MouseEvents
65 0 : SetMouseButtonCode(rMEvt.GetButtons());
66 :
67 0 : bool bReturn = FuConstruct::MouseButtonDown(rMEvt);
68 :
69 0 : if ( rMEvt.IsLeft() && !pView->IsAction() )
70 : {
71 0 : Point aPos( pWindow->PixelToLogic( rMEvt.GetPosPixel() ) );
72 : // Hack to align object to nearest grid position where object
73 : // would be anchored ( if it were cell anchored )
74 : // Get grid offset for current position ( note: aPnt is
75 : // also adjusted )
76 0 : Point aGridOff = CurrentGridSyncOffsetAndPos( aPos );
77 0 : pWindow->CaptureMouse();
78 :
79 0 : if ( pView->GetCurrentObjIdentifier() == OBJ_CAPTION )
80 : {
81 0 : Size aCaptionSize ( 2268, 1134 ); // 4x2cm
82 :
83 0 : bReturn = pView->BegCreateCaptionObj( aPos, aCaptionSize );
84 :
85 : // wie stellt man den Font ein, mit dem geschrieben wird
86 : }
87 : else
88 0 : bReturn = pView->BegCreateObj(aPos);
89 0 : if ( bReturn )
90 0 : pView->GetCreateObj()->SetGridOffset( aGridOff );
91 : }
92 0 : return bReturn;
93 : }
94 :
95 : /*************************************************************************
96 : |*
97 : |* MouseMove-event
98 : |*
99 : \************************************************************************/
100 :
101 0 : bool FuConstRectangle::MouseMove(const MouseEvent& rMEvt)
102 : {
103 0 : return FuConstruct::MouseMove(rMEvt);
104 : }
105 :
106 : /*************************************************************************
107 : |*
108 : |* MouseButtonUp-event
109 : |*
110 : \************************************************************************/
111 :
112 0 : bool FuConstRectangle::MouseButtonUp(const MouseEvent& rMEvt)
113 : {
114 : // remember button state for creation of own MouseEvents
115 0 : SetMouseButtonCode(rMEvt.GetButtons());
116 :
117 0 : bool bReturn = false;
118 :
119 0 : if ( pView->IsCreateObj() && rMEvt.IsLeft() )
120 : {
121 0 : pView->EndCreateObj(SDRCREATE_FORCEEND);
122 :
123 0 : if (aSfxRequest.GetSlot() == SID_DRAW_CAPTION_VERTICAL)
124 : {
125 : // set vertical flag for caption object
126 :
127 0 : const SdrMarkList& rMarkList = pView->GetMarkedObjectList();
128 0 : if (rMarkList.GetMark(0))
129 : {
130 0 : SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
131 : // create OutlinerParaObject now so it can be set to vertical
132 0 : if ( pObj->ISA(SdrTextObj) )
133 0 : static_cast<SdrTextObj*>(pObj)->ForceOutlinerParaObject();
134 0 : OutlinerParaObject* pOPO = pObj->GetOutlinerParaObject();
135 0 : if( pOPO && !pOPO->IsVertical() )
136 0 : pOPO->SetVertical( true );
137 : }
138 : }
139 :
140 0 : bReturn = true;
141 : }
142 0 : return (FuConstruct::MouseButtonUp(rMEvt) || bReturn);
143 : }
144 :
145 : /*************************************************************************
146 : |*
147 : |* Tastaturereignisse bearbeiten
148 : |*
149 : |* Wird ein KeyEvent bearbeitet, so ist der Return-Wert sal_True, andernfalls
150 : |* FALSE.
151 : |*
152 : \************************************************************************/
153 :
154 0 : bool FuConstRectangle::KeyInput(const KeyEvent& rKEvt)
155 : {
156 0 : return FuConstruct::KeyInput(rKEvt);
157 : }
158 :
159 : /*************************************************************************
160 : |*
161 : |* Function aktivieren
162 : |*
163 : \************************************************************************/
164 :
165 0 : void FuConstRectangle::Activate()
166 : {
167 : SdrObjKind aObjKind;
168 :
169 0 : switch (aSfxRequest.GetSlot() )
170 : {
171 : case SID_DRAW_LINE:
172 0 : aNewPointer = Pointer( POINTER_DRAW_LINE );
173 0 : aObjKind = OBJ_LINE;
174 0 : break;
175 :
176 : case SID_DRAW_RECT:
177 0 : aNewPointer = Pointer( POINTER_DRAW_RECT );
178 0 : aObjKind = OBJ_RECT;
179 0 : break;
180 :
181 : case SID_DRAW_ELLIPSE:
182 0 : aNewPointer = Pointer( POINTER_DRAW_ELLIPSE );
183 0 : aObjKind = OBJ_CIRC;
184 0 : break;
185 :
186 : case SID_DRAW_CAPTION:
187 : case SID_DRAW_CAPTION_VERTICAL:
188 0 : aNewPointer = Pointer( POINTER_DRAW_CAPTION );
189 0 : aObjKind = OBJ_CAPTION;
190 0 : break;
191 :
192 : default:
193 0 : aNewPointer = Pointer( POINTER_CROSS );
194 0 : aObjKind = OBJ_RECT;
195 0 : break;
196 : }
197 :
198 0 : pView->SetCurrentObj(sal::static_int_cast<sal_uInt16>(aObjKind));
199 :
200 0 : aOldPointer = pWindow->GetPointer();
201 0 : pViewShell->SetActivePointer( aNewPointer );
202 :
203 0 : FuConstruct::Activate();
204 0 : }
205 :
206 : /*************************************************************************
207 : |*
208 : |* Function deaktivieren
209 : |*
210 : \************************************************************************/
211 :
212 0 : void FuConstRectangle::Deactivate()
213 : {
214 0 : FuConstruct::Deactivate();
215 0 : pViewShell->SetActivePointer( aOldPointer );
216 0 : }
217 :
218 : // Create default drawing objects via keyboard
219 0 : SdrObject* FuConstRectangle::CreateDefaultObject(const sal_uInt16 nID, const Rectangle& rRectangle)
220 : {
221 : SdrObject* pObj = SdrObjFactory::MakeNewObject(
222 0 : pView->GetCurrentObjInventor(), pView->GetCurrentObjIdentifier(),
223 0 : 0L, pDrDoc);
224 :
225 0 : if(pObj)
226 : {
227 0 : Rectangle aRect(rRectangle);
228 0 : Point aStart = aRect.TopLeft();
229 0 : Point aEnd = aRect.BottomRight();
230 :
231 0 : switch(nID)
232 : {
233 : case SID_DRAW_LINE:
234 : {
235 0 : if(pObj->ISA(SdrPathObj))
236 : {
237 0 : sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2);
238 0 : basegfx::B2DPolygon aPoly;
239 0 : aPoly.append(basegfx::B2DPoint(aStart.X(), nYMiddle));
240 0 : aPoly.append(basegfx::B2DPoint(aEnd.X(), nYMiddle));
241 0 : static_cast<SdrPathObj*>(pObj)->SetPathPoly(basegfx::B2DPolyPolygon(aPoly));
242 : }
243 : else
244 : {
245 : OSL_FAIL("Object is NO line object");
246 : }
247 :
248 0 : break;
249 : }
250 : case SID_DRAW_CAPTION:
251 : case SID_DRAW_CAPTION_VERTICAL:
252 : {
253 0 : if(pObj->ISA(SdrCaptionObj))
254 : {
255 0 : bool bIsVertical(SID_DRAW_CAPTION_VERTICAL == nID);
256 :
257 0 : static_cast<SdrTextObj*>(pObj)->SetVerticalWriting(bIsVertical);
258 :
259 0 : if(bIsVertical)
260 : {
261 0 : SfxItemSet aSet(pObj->GetMergedItemSet());
262 0 : aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER));
263 0 : aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT));
264 0 : pObj->SetMergedItemSet(aSet);
265 : }
266 :
267 : // don't set default text, start edit mode instead
268 : // (Edit mode is started in ScTabViewShell::ExecDraw, because
269 : // it must be handled by FuText)
270 : // String aText(ScResId(STR_CAPTION_DEFAULT_TEXT));
271 : // ((SdrCaptionObj*)pObj)->SetText(aText);
272 :
273 0 : static_cast<SdrCaptionObj*>(pObj)->SetLogicRect(aRect);
274 : static_cast<SdrCaptionObj*>(pObj)->SetTailPos(
275 0 : aRect.TopLeft() - Point(aRect.GetWidth() / 2, aRect.GetHeight() / 2));
276 : }
277 : else
278 : {
279 : OSL_FAIL("Object is NO caption object");
280 : }
281 :
282 0 : break;
283 : }
284 :
285 : default:
286 : {
287 0 : pObj->SetLogicRect(aRect);
288 :
289 0 : break;
290 : }
291 : }
292 :
293 0 : SfxItemSet aAttr(pDrDoc->GetItemPool());
294 0 : pObj->SetMergedItemSet(aAttr);
295 : }
296 :
297 0 : return pObj;
298 228 : }
299 :
300 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
