Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 :
21 : // must be first
22 : #include <canvas/debug.hxx>
23 : #include <tools/diagnose_ex.h>
24 : #include <canvas/verbosetrace.hxx>
25 :
26 : #include <comphelper/anytostring.hxx>
27 : #include <cppuhelper/exc_hlp.hxx>
28 :
29 : #include <event.hxx>
30 : #include <eventqueue.hxx>
31 : #include <slideshowexceptions.hxx>
32 :
33 : #include <boost/shared_ptr.hpp>
34 : #include <limits>
35 :
36 :
37 : using namespace ::com::sun::star;
38 :
39 : namespace slideshow
40 : {
41 : namespace internal
42 : {
43 0 : bool EventQueue::EventEntry::operator<( const EventEntry& rEvent ) const
44 : {
45 : // negate comparison, we want priority queue to be sorted
46 : // in increasing order of activation times
47 0 : return this->nTime > rEvent.nTime;
48 : }
49 :
50 :
51 2 : EventQueue::EventQueue(
52 : boost::shared_ptr<canvas::tools::ElapsedTime> const & pPresTimer )
53 : : maMutex(),
54 : maEvents(),
55 : maNextEvents(),
56 : maNextNextEvents(),
57 2 : mpTimer( pPresTimer )
58 : {
59 2 : }
60 :
61 4 : EventQueue::~EventQueue()
62 : {
63 : // add in all that have been added explicitly for this round:
64 2 : EventEntryVector::const_iterator const iEnd( maNextEvents.end() );
65 2 : for ( EventEntryVector::const_iterator iPos( maNextEvents.begin() );
66 : iPos != iEnd; ++iPos )
67 : {
68 0 : maEvents.push(*iPos);
69 : }
70 2 : EventEntryVector().swap( maNextEvents );
71 :
72 : // dispose event queue
73 4 : while( !maEvents.empty() )
74 : {
75 : try
76 : {
77 0 : maEvents.top().pEvent->dispose();
78 : }
79 0 : catch (uno::Exception &)
80 : {
81 : OSL_FAIL( OUStringToOString(
82 : comphelper::anyToString(
83 : cppu::getCaughtException() ),
84 : RTL_TEXTENCODING_UTF8 ).getStr() );
85 : }
86 0 : maEvents.pop();
87 : }
88 2 : }
89 :
90 0 : bool EventQueue::addEvent( const EventSharedPtr& rEvent )
91 : {
92 0 : ::osl::MutexGuard aGuard( maMutex );
93 :
94 : SAL_INFO("slideshow.eventqueue", "adding event \"" << rEvent->GetDescription()
95 : << "\" [" << rEvent.get()
96 : << "] at " << mpTimer->getElapsedTime()
97 : << " with delay " << rEvent->getActivationTime(0.0)
98 : );
99 0 : ENSURE_OR_RETURN_FALSE( rEvent,
100 : "EventQueue::addEvent: event ptr NULL" );
101 :
102 : // prepare entry
103 :
104 : // A seemingly obvious optimization cannot be used here,
105 : // because it breaks assumed order of notification: zero
106 : // timeout events could be fired() immediately, but that
107 : // would not unwind the stack and furthermore changes
108 : // order of notification
109 :
110 : // add entry
111 0 : maEvents.push( EventEntry( rEvent, rEvent->getActivationTime(
112 0 : mpTimer->getElapsedTime()) ) );
113 0 : return true;
114 : }
115 :
116 0 : bool EventQueue::addEventForNextRound( EventSharedPtr const& rEvent )
117 : {
118 0 : ::osl::MutexGuard aGuard( maMutex );
119 :
120 : SAL_INFO("slideshow.eventqueue", "adding event \"" << rEvent->GetDescription()
121 : << "\" [" << rEvent.get()
122 : << "] for the next round at " << mpTimer->getElapsedTime()
123 : << " with delay " << rEvent->getActivationTime(0.0)
124 : );
125 :
126 0 : ENSURE_OR_RETURN_FALSE( rEvent.get() != NULL,
127 : "EventQueue::addEvent: event ptr NULL" );
128 : maNextEvents.push_back(
129 0 : EventEntry( rEvent, rEvent->getActivationTime(
130 0 : mpTimer->getElapsedTime()) ) );
131 0 : return true;
132 : }
133 :
134 0 : bool EventQueue::addEventWhenQueueIsEmpty (const EventSharedPtr& rpEvent)
135 : {
136 0 : ::osl::MutexGuard aGuard( maMutex );
137 :
138 : SAL_INFO("slideshow.eventqueue", "adding event \"" << rpEvent->GetDescription()
139 : << "\" [" << rpEvent.get()
140 : << "] for execution when the queue is empty at " << mpTimer->getElapsedTime()
141 : << " with delay " << rpEvent->getActivationTime(0.0)
142 : );
143 :
144 0 : ENSURE_OR_RETURN_FALSE(
145 : rpEvent.get() != NULL,
146 : "EventQueue::addEvent: event ptr NULL");
147 :
148 : maNextNextEvents.push(
149 : EventEntry(
150 : rpEvent,
151 0 : rpEvent->getActivationTime(mpTimer->getElapsedTime())));
152 :
153 0 : return true;
154 : }
155 :
156 0 : void EventQueue::forceEmpty()
157 : {
158 0 : ::osl::MutexGuard aGuard( maMutex );
159 :
160 0 : process_(true);
161 0 : }
162 :
163 0 : void EventQueue::process()
164 : {
165 0 : ::osl::MutexGuard aGuard( maMutex );
166 :
167 0 : process_(false);
168 0 : }
169 :
170 0 : void EventQueue::process_( bool bFireAllEvents )
171 : {
172 : VERBOSE_TRACE( "EventQueue: heartbeat" );
173 :
174 : // add in all that have been added explicitly for this round:
175 0 : EventEntryVector::const_iterator const iEnd( maNextEvents.end() );
176 0 : for ( EventEntryVector::const_iterator iPos( maNextEvents.begin() );
177 : iPos != iEnd; ++iPos ) {
178 0 : maEvents.push(*iPos);
179 : }
180 0 : EventEntryVector().swap( maNextEvents );
181 :
182 : // perform topmost, ready-to-execute event
183 : // =======================================
184 :
185 0 : const double nCurrTime( mpTimer->getElapsedTime() );
186 :
187 : // When maEvents does not contain any events that are due now
188 : // then process one event from maNextNextEvents.
189 0 : if (!maNextNextEvents.empty()
190 0 : && !bFireAllEvents
191 0 : && (maEvents.empty() || maEvents.top().nTime > nCurrTime))
192 : {
193 0 : const EventEntry aEvent (maNextNextEvents.top());
194 0 : maNextNextEvents.pop();
195 0 : maEvents.push(aEvent);
196 : }
197 :
198 : // process ready/elapsed events. Note that the 'perceived'
199 : // current time remains constant for this loop, thus we're
200 : // processing only those events which where ready when we
201 : // entered this method.
202 0 : while( !maEvents.empty() &&
203 0 : (bFireAllEvents || maEvents.top().nTime <= nCurrTime) )
204 : {
205 0 : EventEntry event( maEvents.top() );
206 0 : maEvents.pop();
207 :
208 : // only process event, if it is still 'charged',
209 : // i.e. the fire() call effects something. This is
210 : // used when e.g. having events registered at multiple
211 : // places, which should fire only once: after the
212 : // initial fire() call, those events become inactive
213 : // and return false on isCharged. This frees us from
214 : // the need to prune queues of those inactive shells.
215 0 : if( event.pEvent->isCharged() )
216 : {
217 : try
218 : {
219 : SAL_INFO("slideshow.eventqueue", "firing event \""
220 : << event.pEvent->GetDescription()
221 : << "\" [" << event.pEvent.get()
222 : << "] at " << mpTimer->getElapsedTime()
223 : << " with delay " << event.pEvent->getActivationTime(0.0)
224 : );
225 0 : event.pEvent->fire();
226 : SAL_INFO("slideshow.eventqueue", "event \""
227 : << event.pEvent->GetDescription()
228 : << "\" [" << event.pEvent.get() << "] fired"
229 : );
230 : }
231 0 : catch( uno::RuntimeException& )
232 : {
233 0 : throw;
234 : }
235 0 : catch( uno::Exception& )
236 : {
237 : // catch anything here, we don't want
238 : // to leave this scope under _any_
239 : // circumstance. Although, do _not_
240 : // reinsert an activity that threw
241 : // once.
242 :
243 : // NOTE: we explicitly don't catch(...) here,
244 : // since this will also capture segmentation
245 : // violations and the like. In such a case, we
246 : // still better let our clients now...
247 : OSL_FAIL( OUStringToOString(
248 : comphelper::anyToString( cppu::getCaughtException() ),
249 : RTL_TEXTENCODING_UTF8 ).getStr() );
250 : }
251 0 : catch( SlideShowException& )
252 : {
253 : // catch anything here, we don't want
254 : // to leave this scope under _any_
255 : // circumstance. Although, do _not_
256 : // reinsert an activity that threw
257 : // once.
258 :
259 : // NOTE: we explicitly don't catch(...) here,
260 : // since this will also capture segmentation
261 : // violations and the like. In such a case, we
262 : // still better let our clients now...
263 : OSL_TRACE( "::presentation::internal::EventQueue: Event threw a SlideShowException, action might not have been fully performed" );
264 : }
265 : }
266 : else
267 : {
268 : #if OSL_DEBUG_LEVEL > 0
269 : VERBOSE_TRACE( "Ignoring discharged event: unknown (0x%X), timeout was: %f",
270 : event.pEvent.get(),
271 : event.pEvent->getActivationTime(0.0) );
272 : #endif
273 : }
274 0 : }
275 0 : }
276 :
277 0 : bool EventQueue::isEmpty() const
278 : {
279 0 : ::osl::MutexGuard aGuard( maMutex );
280 :
281 0 : return maEvents.empty() && maNextEvents.empty() && maNextNextEvents.empty();
282 : }
283 :
284 0 : double EventQueue::nextTimeout() const
285 : {
286 0 : ::osl::MutexGuard aGuard( maMutex );
287 :
288 : // return time for next entry (if any)
289 0 : double nTimeout (::std::numeric_limits<double>::max());
290 0 : const double nCurrentTime (mpTimer->getElapsedTime());
291 0 : if ( ! maEvents.empty())
292 0 : nTimeout = maEvents.top().nTime - nCurrentTime;
293 0 : if ( ! maNextEvents.empty())
294 0 : nTimeout = ::std::min(nTimeout, maNextEvents.front().nTime - nCurrentTime);
295 0 : if ( ! maNextNextEvents.empty())
296 0 : nTimeout = ::std::min(nTimeout, maNextNextEvents.top().nTime - nCurrentTime);
297 :
298 0 : return nTimeout;
299 : }
300 :
301 2 : void EventQueue::clear()
302 : {
303 2 : ::osl::MutexGuard aGuard( maMutex );
304 :
305 : // TODO(P1): Maybe a plain vector and vector.swap will
306 : // be faster here. Profile.
307 2 : maEvents = ImplQueueType();
308 :
309 2 : maNextEvents.clear();
310 2 : maNextNextEvents = ImplQueueType();
311 2 : }
312 : }
313 : }
314 :
315 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
