Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include <svx/svxids.hrc>
21 : #include <vcl/msgbox.hxx>
22 : #include <sfx2/request.hxx>
23 : #include <sfx2/dispatch.hxx>
24 : #include <svx/svdview.hxx>
25 : #include <svx/drawitem.hxx>
26 :
27 : #include <svx/xtable.hxx>
28 : #include "view.hxx"
29 : #include "wrtsh.hxx"
30 : #include "docsh.hxx"
31 : #include "cmdid.h"
32 :
33 : #include "drawsh.hxx"
34 : #include <svx/svxdlg.hxx>
35 : #include <svx/dialogs.hrc>
36 : #include <boost/scoped_ptr.hpp>
37 :
38 0 : void SwDrawShell::ExecDrawDlg(SfxRequest& rReq)
39 : {
40 0 : SwWrtShell* pSh = &GetShell();
41 0 : SdrView* pView = pSh->GetDrawView();
42 0 : SdrModel* pDoc = pView->GetModel();
43 0 : bool bChanged = pDoc->IsChanged();
44 0 : pDoc->SetChanged(false);
45 :
46 0 : SfxItemSet aNewAttr( pDoc->GetItemPool() );
47 0 : pView->GetAttributes( aNewAttr );
48 :
49 0 : GetView().NoRotate();
50 :
51 0 : switch (rReq.GetSlot())
52 : {
53 : case FN_DRAWTEXT_ATTR_DLG:
54 : {
55 0 : SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
56 0 : if ( pFact )
57 : {
58 0 : boost::scoped_ptr<SfxAbstractTabDialog> pDlg(pFact->CreateTextTabDialog( NULL, &aNewAttr, pView ));
59 0 : sal_uInt16 nResult = pDlg->Execute();
60 :
61 0 : if (nResult == RET_OK)
62 : {
63 0 : if (pView->AreObjectsMarked())
64 : {
65 0 : pSh->StartAction();
66 0 : pView->SetAttributes(*pDlg->GetOutputItemSet());
67 0 : rReq.Done(*(pDlg->GetOutputItemSet()));
68 0 : pSh->EndAction();
69 : }
70 0 : }
71 : }
72 : }
73 0 : break;
74 :
75 : case SID_ATTRIBUTES_AREA:
76 : {
77 0 : bool bHasMarked = pView->AreObjectsMarked();
78 :
79 0 : SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
80 : boost::scoped_ptr<AbstractSvxAreaTabDialog> pDlg(pFact->CreateSvxAreaTabDialog( NULL,
81 : &aNewAttr,
82 : pDoc,
83 0 : true));
84 0 : if (pDlg->Execute() == RET_OK)
85 : {
86 0 : pSh->StartAction();
87 0 : if (bHasMarked)
88 0 : pView->SetAttributes(*pDlg->GetOutputItemSet());
89 : else
90 0 : pView->SetDefaultAttr(*pDlg->GetOutputItemSet(), false);
91 0 : pSh->EndAction();
92 :
93 : static sal_uInt16 aInval[] =
94 : {
95 : SID_ATTR_FILL_STYLE,
96 : SID_ATTR_FILL_COLOR,
97 : SID_ATTR_FILL_TRANSPARENCE,
98 : SID_ATTR_FILL_FLOATTRANSPARENCE,
99 : 0
100 : };
101 0 : SfxBindings &rBnd = GetView().GetViewFrame()->GetBindings();
102 0 : rBnd.Invalidate(aInval);
103 0 : rBnd.Update(SID_ATTR_FILL_STYLE);
104 0 : rBnd.Update(SID_ATTR_FILL_COLOR);
105 0 : rBnd.Update(SID_ATTR_FILL_TRANSPARENCE);
106 0 : rBnd.Update(SID_ATTR_FILL_FLOATTRANSPARENCE);
107 0 : }
108 : }
109 0 : break;
110 :
111 : case SID_ATTRIBUTES_LINE:
112 : {
113 0 : bool bHasMarked = pView->AreObjectsMarked();
114 :
115 0 : const SdrObject* pObj = NULL;
116 0 : const SdrMarkList& rMarkList = pView->GetMarkedObjectList();
117 0 : if( rMarkList.GetMarkCount() == 1 )
118 0 : pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
119 :
120 0 : SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
121 : OSL_ENSURE(pFact, "Dialog creation failed!");
122 : boost::scoped_ptr<SfxAbstractTabDialog> pDlg(pFact->CreateSvxLineTabDialog( NULL,
123 : &aNewAttr,
124 : pDoc,
125 : pObj,
126 0 : bHasMarked));
127 : OSL_ENSURE(pDlg, "Dialog creation failed!");
128 0 : if (pDlg->Execute() == RET_OK)
129 : {
130 0 : pSh->StartAction();
131 0 : if(bHasMarked)
132 0 : pView->SetAttrToMarked(*pDlg->GetOutputItemSet(), false);
133 : else
134 0 : pView->SetDefaultAttr(*pDlg->GetOutputItemSet(), false);
135 0 : pSh->EndAction();
136 :
137 : static sal_uInt16 aInval[] =
138 : {
139 : SID_ATTR_LINE_STYLE, // ( SID_SVX_START + 169 )
140 : SID_ATTR_LINE_DASH, // ( SID_SVX_START + 170 )
141 : SID_ATTR_LINE_WIDTH, // ( SID_SVX_START + 171 )
142 : SID_ATTR_LINE_COLOR, // ( SID_SVX_START + 172 )
143 : SID_ATTR_LINE_START, // ( SID_SVX_START + 173 )
144 : SID_ATTR_LINE_END, // ( SID_SVX_START + 174 )
145 : SID_ATTR_LINE_TRANSPARENCE, // (SID_SVX_START+1107)
146 : SID_ATTR_LINE_JOINT, // (SID_SVX_START+1110)
147 : SID_ATTR_LINE_CAP, // (SID_SVX_START+1111)
148 : 0
149 : };
150 :
151 0 : GetView().GetViewFrame()->GetBindings().Invalidate(aInval);
152 0 : }
153 : }
154 0 : break;
155 :
156 : default:
157 0 : break;
158 : }
159 :
160 0 : if (pDoc->IsChanged())
161 0 : GetShell().SetModified();
162 : else
163 0 : if (bChanged)
164 0 : pDoc->SetChanged(true);
165 0 : }
166 :
167 0 : void SwDrawShell::ExecDrawAttrArgs(SfxRequest& rReq)
168 : {
169 0 : SwWrtShell* pSh = &GetShell();
170 0 : SdrView* pView = pSh->GetDrawView();
171 0 : const SfxItemSet* pArgs = rReq.GetArgs();
172 0 : bool bChanged = pView->GetModel()->IsChanged();
173 0 : pView->GetModel()->SetChanged(false);
174 :
175 0 : GetView().NoRotate();
176 :
177 0 : if (pArgs)
178 : {
179 0 : if(pView->AreObjectsMarked())
180 0 : pView->SetAttrToMarked(*rReq.GetArgs(), false);
181 : else
182 0 : pView->SetDefaultAttr(*rReq.GetArgs(), false);
183 : }
184 : else
185 : {
186 0 : SfxDispatcher* pDis = pSh->GetView().GetViewFrame()->GetDispatcher();
187 0 : switch (rReq.GetSlot())
188 : {
189 : case SID_ATTR_FILL_STYLE:
190 : case SID_ATTR_FILL_COLOR:
191 : case SID_ATTR_FILL_GRADIENT:
192 : case SID_ATTR_FILL_HATCH:
193 : case SID_ATTR_FILL_BITMAP:
194 : case SID_ATTR_FILL_TRANSPARENCE:
195 : case SID_ATTR_FILL_FLOATTRANSPARENCE:
196 0 : pDis->Execute(SID_ATTRIBUTES_AREA);
197 0 : break;
198 : case SID_ATTR_LINE_STYLE:
199 : case SID_ATTR_LINE_DASH:
200 : case SID_ATTR_LINE_WIDTH:
201 : case SID_ATTR_LINE_COLOR:
202 : case SID_ATTR_LINE_TRANSPARENCE:
203 : case SID_ATTR_LINE_JOINT:
204 : case SID_ATTR_LINE_CAP:
205 0 : pDis->Execute(SID_ATTRIBUTES_LINE);
206 0 : break;
207 : }
208 : }
209 0 : if (pView->GetModel()->IsChanged())
210 0 : GetShell().SetModified();
211 : else
212 0 : if (bChanged)
213 0 : pView->GetModel()->SetChanged(true);
214 0 : }
215 :
216 0 : void SwDrawShell::GetDrawAttrState(SfxItemSet& rSet)
217 : {
218 0 : SdrView* pSdrView = GetShell().GetDrawView();
219 :
220 0 : if (pSdrView->AreObjectsMarked())
221 : {
222 0 : bool bDisable = Disable( rSet );
223 :
224 0 : if( !bDisable )
225 0 : pSdrView->GetAttributes( rSet );
226 : }
227 : else
228 0 : rSet.Put(pSdrView->GetDefaultAttr());
229 270 : }
230 :
231 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
