Line data Source code
1 : /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 : /*
3 : * This file is part of the LibreOffice project.
4 : *
5 : * This Source Code Form is subject to the terms of the Mozilla Public
6 : * License, v. 2.0. If a copy of the MPL was not distributed with this
7 : * file, You can obtain one at http://mozilla.org/MPL/2.0/.
8 : *
9 : * This file incorporates work covered by the following license notice:
10 : *
11 : * Licensed to the Apache Software Foundation (ASF) under one or more
12 : * contributor license agreements. See the NOTICE file distributed
13 : * with this work for additional information regarding copyright
14 : * ownership. The ASF licenses this file to you under the Apache
15 : * License, Version 2.0 (the "License"); you may not use this file
16 : * except in compliance with the License. You may obtain a copy of
17 : * the License at http://www.apache.org/licenses/LICENSE-2.0 .
18 : */
19 :
20 : #include "cmdid.h"
21 : #include "hintids.hxx"
22 : #include <editeng/sizeitem.hxx>
23 : #include <editeng/brushitem.hxx>
24 : #include <sfx2/app.hxx>
25 : #include <sfx2/request.hxx>
26 : #include <sfx2/objface.hxx>
27 : #include <sfx2/bindings.hxx>
28 : #include <svl/stritem.hxx>
29 : #include <svl/eitem.hxx>
30 : #include <svl/whiter.hxx>
31 : #include <svl/intitem.hxx>
32 : #include <svl/srchitem.hxx>
33 :
34 : #include <numrule.hxx>
35 : #include <fmtornt.hxx>
36 : #include "wrtsh.hxx"
37 : #include "swmodule.hxx"
38 : #include "frmatr.hxx"
39 : #include "helpid.h"
40 : #include "globals.hrc"
41 : #include "shells.hrc"
42 : #include "uinums.hxx"
43 : #include "listsh.hxx"
44 : #include "poolfmt.hxx"
45 : #include "view.hxx"
46 : #include "edtwin.hxx"
47 :
48 : #define SwListShell
49 : #include <sfx2/msg.hxx>
50 : #include "swslots.hxx"
51 :
52 : #include <IDocumentOutlineNodes.hxx>
53 :
54 848 : SFX_IMPL_INTERFACE(SwListShell, SwBaseShell, SW_RES(STR_SHELLNAME_LIST))
55 :
56 90 : void SwListShell::InitInterface_Impl()
57 : {
58 90 : GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SW_RES(RID_NUM_TOOLBOX));
59 90 : }
60 :
61 1368 : TYPEINIT1(SwListShell,SwBaseShell)
62 :
63 : // #i35572# Functionality of Numbering/Bullet toolbar
64 : // for outline numbered paragraphs should match the functions for outlines
65 : // available in the navigator. Therefore the code in the following
66 : // function is quite similar the code in SwContentTree::ExecCommand.
67 0 : static void lcl_OutlineUpDownWithSubPoints( SwWrtShell& rSh, bool bMove, bool bUp )
68 : {
69 0 : const sal_uInt16 nActPos = rSh.GetOutlinePos();
70 0 : if ( nActPos < USHRT_MAX && rSh.IsOutlineMovable( nActPos ) )
71 : {
72 0 : rSh.Push();
73 0 : rSh.MakeOutlineSel( nActPos, nActPos, true );
74 :
75 0 : if ( bMove )
76 : {
77 0 : const IDocumentOutlineNodes* pIDoc( rSh.getIDocumentOutlineNodesAccess() );
78 0 : const int nActLevel = pIDoc->getOutlineLevel( nActPos );
79 0 : sal_Int32 nActEndPos = nActPos + 1;
80 0 : sal_Int16 nDir = 0;
81 :
82 0 : if ( !bUp )
83 : {
84 : // Move down with subpoints:
85 0 : while ( nActEndPos < pIDoc->getOutlineNodesCount() &&
86 0 : pIDoc->getOutlineLevel( nActEndPos ) > nActLevel )
87 0 : ++nActEndPos;
88 :
89 0 : if ( nActEndPos < pIDoc->getOutlineNodesCount() )
90 : {
91 : // The current subpoint which should be moved
92 : // starts at nActPos and ends at nActEndPos - 1
93 0 : --nActEndPos;
94 0 : sal_Int32 nDest = nActEndPos + 2;
95 0 : while ( nDest < pIDoc->getOutlineNodesCount() &&
96 0 : pIDoc->getOutlineLevel( nDest ) > nActLevel )
97 0 : ++nDest;
98 :
99 0 : nDir = nDest - 1 - nActEndPos;
100 : }
101 : }
102 : else
103 : {
104 : // Move up with subpoints:
105 0 : if ( nActPos > 0 )
106 : {
107 0 : --nActEndPos;
108 0 : sal_Int32 nDest = nActPos - 1;
109 0 : while ( nDest > 0 && pIDoc->getOutlineLevel( nDest ) > nActLevel )
110 0 : --nDest;
111 :
112 0 : nDir = nDest - nActPos;
113 : }
114 : }
115 :
116 0 : if ( nDir )
117 : {
118 0 : rSh.MoveOutlinePara( nDir );
119 0 : rSh.GotoOutline( nActPos + nDir );
120 : }
121 : }
122 : else
123 : {
124 : // Up/down with subpoints:
125 0 : rSh.OutlineUpDown( bUp ? -1 : 1 );
126 : }
127 :
128 0 : rSh.ClearMark();
129 0 : rSh.Pop( false );
130 : }
131 0 : }
132 :
133 0 : void SwListShell::Execute(SfxRequest &rReq)
134 : {
135 0 : const SfxItemSet* pArgs = rReq.GetArgs();
136 0 : const sal_uInt16 nSlot = rReq.GetSlot();
137 0 : SwWrtShell& rSh = GetShell();
138 :
139 : // #i35572#
140 0 : const SwNumRule* pCurRule = rSh.GetNumRuleAtCurrCrsrPos();
141 : OSL_ENSURE( pCurRule, "SwListShell::Execute without NumRule" );
142 0 : bool bOutline = pCurRule && pCurRule->IsOutlineRule();
143 :
144 0 : switch (nSlot)
145 : {
146 : case FN_NUM_BULLET_DOWN:
147 : case FN_NUM_BULLET_UP:
148 : {
149 0 : SfxViewFrame * pFrame = GetView().GetViewFrame();
150 :
151 0 : rReq.Done();
152 0 : rSh.NumUpDown( nSlot == FN_NUM_BULLET_DOWN );
153 0 : pFrame->GetBindings().Invalidate( SID_TABLE_CELL ); // Update status line!
154 : }
155 0 : break;
156 :
157 : case FN_NUM_BULLET_NEXT:
158 0 : rSh.GotoNextNum();
159 0 : rReq.Done();
160 0 : break;
161 :
162 : case FN_NUM_BULLET_NONUM:
163 0 : rSh.NoNum();
164 0 : rReq.Done();
165 0 : break;
166 :
167 : case FN_NUM_BULLET_OFF:
168 : {
169 0 : rReq.Ignore();
170 0 : SfxRequest aReq( GetView().GetViewFrame(), FN_NUM_BULLET_ON );
171 0 : aReq.AppendItem( SfxBoolItem( FN_PARAM_1, false ) );
172 0 : aReq.Done();
173 0 : rSh.DelNumRules();
174 0 : break;
175 : }
176 :
177 : case FN_NUM_BULLET_OUTLINE_DOWN:
178 0 : if ( bOutline )
179 0 : lcl_OutlineUpDownWithSubPoints( rSh, false, false );
180 : else
181 0 : rSh.MoveNumParas(false, false);
182 0 : rReq.Done();
183 0 : break;
184 :
185 : case FN_NUM_BULLET_OUTLINE_MOVEDOWN:
186 0 : if ( bOutline )
187 0 : lcl_OutlineUpDownWithSubPoints( rSh, true, false );
188 : else
189 0 : rSh.MoveNumParas(true, false);
190 0 : rReq.Done();
191 0 : break;
192 :
193 : case FN_NUM_BULLET_OUTLINE_MOVEUP:
194 0 : if ( bOutline )
195 0 : lcl_OutlineUpDownWithSubPoints( rSh, true, true );
196 : else
197 0 : rSh.MoveNumParas(true, true);
198 0 : rReq.Done();
199 0 : break;
200 :
201 : case FN_NUM_BULLET_OUTLINE_UP:
202 0 : if ( bOutline )
203 0 : lcl_OutlineUpDownWithSubPoints( rSh, false, true );
204 : else
205 0 : rSh.MoveNumParas(false, true);
206 0 : rReq.Done();
207 0 : break;
208 :
209 : case FN_NUM_BULLET_PREV:
210 0 : rSh.GotoPrevNum();
211 0 : rReq.Done();
212 0 : break;
213 :
214 : case FN_NUM_OR_NONUM:
215 : {
216 0 : bool bApi = rReq.IsAPI();
217 0 : bool bDelete = !rSh.IsNoNum(!bApi);
218 0 : if(pArgs )
219 0 : bDelete = ((SfxBoolItem &)pArgs->Get(rReq.GetSlot())).GetValue();
220 0 : rSh.NumOrNoNum( bDelete, !bApi );
221 0 : rReq.AppendItem( SfxBoolItem( nSlot, bDelete ) );
222 0 : rReq.Done();
223 : }
224 0 : break;
225 : default:
226 : OSL_ENSURE(false, "wrong dispatcher");
227 0 : return;
228 : }
229 : }
230 :
231 0 : void SwListShell::GetState(SfxItemSet &rSet)
232 : {
233 0 : SfxWhichIter aIter( rSet );
234 0 : sal_uInt16 nWhich = aIter.FirstWhich();
235 0 : SwWrtShell& rSh = GetShell();
236 0 : sal_uInt8 nCurrentNumLevel = rSh.GetNumLevel();
237 0 : while ( nWhich )
238 : {
239 0 : switch( nWhich )
240 : {
241 : case FN_NUM_OR_NONUM:
242 0 : rSet.Put(SfxBoolItem(nWhich, GetShell().IsNoNum(false)));
243 0 : break;
244 : case FN_NUM_BULLET_OUTLINE_UP:
245 : case FN_NUM_BULLET_UP:
246 0 : if(!nCurrentNumLevel)
247 0 : rSet.DisableItem(nWhich);
248 0 : break;
249 : case FN_NUM_BULLET_OUTLINE_DOWN :
250 : {
251 0 : sal_uInt8 nUpper = 0;
252 0 : sal_uInt8 nLower = 0;
253 0 : rSh.GetCurrentOutlineLevels( nUpper, nLower );
254 0 : if(nLower == (MAXLEVEL - 1))
255 0 : rSet.DisableItem(nWhich);
256 : }
257 0 : break;
258 : case FN_NUM_BULLET_DOWN:
259 0 : if(nCurrentNumLevel == (MAXLEVEL - 1))
260 0 : rSet.DisableItem(nWhich);
261 0 : break;
262 :
263 : case FN_NUM_BULLET_NONUM:
264 0 : if ( rSh.CrsrInsideInputFld() )
265 : {
266 0 : rSet.DisableItem(nWhich);
267 : }
268 0 : break;
269 : }
270 0 : nWhich = aIter.NextWhich();
271 0 : }
272 0 : }
273 :
274 94 : SwListShell::SwListShell(SwView &_rView) :
275 94 : SwBaseShell(_rView)
276 : {
277 94 : SetName(OUString("List"));
278 94 : SetHelpId(SW_LISTSHELL);
279 364 : }
280 :
281 : /* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|
