LibreOfficeDev 25.2 Yardım
Belgenin farklı bölümlerine hızlıca geçebileceğiniz Gezgin penceresini gösterir veya gizler.
Gezgin'i kullanarak mevcut belge veya diğer açık belgelerden öğeler ekleyebilir ve ana belgeleri düzenleyebilirsiniz.
Gezgin'deki bir öğeyi düzenlemek için öğeye sağ tıklayın ve ardından bağlam menüsünden bir komut seçin.
Gezgin'i çalışma alanınızın kenarına sabitleyebilirsiniz.
Gezgin'i taşımak için başlık çubuğunu sürükleyin.
Gezgin'i sabitlemek için, başlık çubuğunu çalışma alanının sol, sağ veya alt kenarına sürükleyin. Gezgin'i sabit tutmaktan çıkarmak için ise CommandCtrl tuşunu basılı tutun ve Gezgin'in gri bir alanına çift tıklayın.
Gezgin'deki bir kategori yanındaki genişletme simgesine (+) tıklayarak kategorideki öğeleri görüntüleyebilirsiniz. Genişletilmiş bir kategoriye tıklayarak onu daraltabilirsiniz.
Bir kategorideki öğelerin sayısını görüntülemek için Gezgin'de fare imlecinizi kategorinin üzerine getirin.
Belgede bir öğeye gitmek için Gezgin'de öğeye çift tıklayın.
Bir belgedeki sonraki veya önceki ögeye atlamak maksadıyla öge kategorisi seçmek için Şununla Gezin listesini kullan ve Önceki veya Sonraki oklarına tıkla.
Gezgin, farklı kategorilere göre (Başlıklar, Tablolar, Bağlantılar ve daha fazlası) mevcut belge imleç konumu öğesi ile Gezgin görünümü arasındaki karşılığı gösterir. Öğe, Gezgin içerik görünümünde gösterilir ve vurgulanır. Eğer öğe, daraltılmış bir katmanda yer alıyorsa, üzerindeki gerekli katmanlar otomatik olarak genişletilir ve sonrasında genişletilmiş olarak kalır.
Belge öğeleri, Gezgin'de üzerine gelinen giriş adına tıklanarak renklerinin ters çevrilmesiyle, görüntülenen sayfada vurgulanır. Bu, Gezgin'de üzerinde gelinen öğeye dikkat çekmek için kullanılır.
Önceki ve Sonraki düğmelerini kullanırken, hangi türdeki öğenin gezinileceğini belirlemek için seçim kutusunu kullanın.
Belgedeki bir önceki ögeye atlar. Atlanacak ögenin türünü belirlemek içinŞununla Gezin listesine tıklayın ve sonra bir öge kategorisine tıklayın - örneğin, "Resimler".
Önceki Öğe
Belgedeki bir sonraki ögeye atlar. Atlanacak ögenin türünü belirlemek içinŞununla Gezin listesine tıkla, ve sonra bir öge kategorisine tıkla - örneğin, "Resimler".
Sonraki Öğe
Atlamak istediğiniz sayfanın numarasını yazın ve ardından Enter tuşuna basın. Gezinmek için döndürme düğmesini kullan .
Gezintinin tüm kategorilerinin görüntülenmesiyle seçilen kategorinin görüntülenmesi arasında geçiş yapar.
İçerik Gezinme Görünümüne Geç
İçerik menüleri, bu yardım sayfasında bulunan komutların bir seçimini kullanır. Bir içerik menüsündeki komutlar, hangi kategori veya ögenin seçildiğine bağlı olarak değişir.
Bir belgedeki gizli bir bölüm Gezgin'de gri görünür ve fare işaretçisini üzerine getirdiğinizde “gizli” metni görüntülenir. Aynı durum, belgede kullanılmayan Sayfa Stillerinin üstbilgi ve altbilgi içerikleri ve tablolar, çerçeveler, grafikler, OLE nesneleri ve dizinlerdeki gizli içerikler için de geçerlidir.
Ana görünüm ve normal görünüm arasında geçişin sağlanması için ana belge açık olmalıdır.
Ana Görünüme Geç
İmleci üst bilgiye veya üst bilgiden metin alanına taşır.
Başlık
İmleci alt bilgiye veya alt bilgiden metin alanına taşır.
Alt bilgi
Alt bilgi metni ile alt bilgi sabitleyicisi arasında geçiş yapar.
Sabitleyici <-> Metin
Click here to set a reminder at the current cursor position. You can define up to five reminders. To jump to a reminder, click the Navigate By list, select , and then click Previous or Next.
Anımsatıcı Belirle
Anımsatıcılar ayarlandıkları sırayla gezilir. Bir belge kapatıldığında hatırlatıcılar kaydedilmez.
Click the icon at the top of Navigator or right-click a heading in the Navigator window, then choose how many levels of headings to show in the Headings section of the Navigator window.
For example, choose 1 to only show headings with outline level 1. Choose 3 to show headings up to outline level 3; choose 10 to show all headings.
Anahat Düzeyine Kadar Göster
Gezgin listesini gösterir veya gizler.
Liste kutusu açık/kapalı
You can drag items listed in the navigator and drop in your document. By default, navigator items are inserted as hyperlink with the item name as text of the hyperlink. Depending on the nature of the item you drag, more options are available when you drop it.
Bir öğeyi belge içine sürükleyip bıraktığınızda bir köprü oluşturur. Köprünün işaret ettiği öğeye sıçramak için belgedeki köprüye tıklayın.
Sürükle bırak yaptığınız mevcut belge içerisine seçili öğeyi bir bağlantı olarak ekler. Metin korumalı bir bölüm olarak eklenir. Bağlantıların içerikleri kaynak güncellendiğinde otomatik olarak güncellenir. Belge içerisindeki bağlantıları elle güncellemek için, Araçlar - Güncelle - Bağlantılar'ı seçin. Grafikler, OLE nesneleri, referans ve dizinler için bağlantı oluşturamazsınız.
Sürükle belge yaptığınız belge içerisine seçili öğenin bir kopyasını ekler. Grafiklerin, OLE nesnelerinin, referans ve dizinlerin kopyasını sürüyleyip bırakamazsınız.
Collapse (Expand) the selected heading, and the text below the heading, down one heading position in the Navigator and in the document.
Copies the heading and the contents that follow the heading until the next heading with the same outline level. These contents include paragraphs with outline level “None” and headings with an outline level greater than the copied heading. You can paste the contents in another place in the document.
Deletes the heading and the contents that follow the heading until the next heading with the same outline level. These contents include paragraphs with outline level “None” and headings with an outline level greater than the deleted heading.
Selects the heading and the contents that follow the heading until the next heading with the same outline level. These contents include paragraphs with outline level “None” and headings with an outline level greater than the selected heading.
Moves the selected heading, and the text below the heading, up one heading position in the Navigator and in the document. To move only the selected heading and not the text associated with the heading, hold down CommandCtrl, and then click this icon.
Başlığı Yukarı Taşı
Moves the selected heading, and the text below the heading, down one heading position in the Navigator and in the document. To move only the selected heading and not the text associated with the heading, hold down CommandCtrl, and then click this icon.
Move Heading Down
Hızlı bir şekilde başlıkları ve ilişkili oldukları metinleri yeniden sıralamak için, kategori listesinden "Başlıklar" kısmını seçin ve İçerik Görünümü simgesine tıklayın. Artık sürükle bırak ile içeriği yeniden sıralayabilirsiniz.
Increases the outline level of the selected heading, and the headings that occur below the heading, by one. To only increase the outline level of the selected heading, hold down CommandCtrl, and then click this icon.
Anahat Düzeyini Yükselt
Decreases the outline level of the selected heading, and the headings that occur below the heading, by one. To only decrease the outline level of the selected heading, hold down CommandCtrl, and then click this icon.
Anahat Düzeyini İndirge
Set Navigator’s mode of outline tracking. This feature applies only to outline entries under
in the Content View frame of Navigator. To see, enable, or change the mode, right-click on or an item under Headings and choose . The selected mode is applied to the entire document.In
and mode, Navigator will automatically select the nearest heading before the current cursor position in the document.In
mode, the display of outline entries in Navigator is never changed, only an outline entry is selected.In
mode, Navigator shows only the headings for the selected outline level, relative to the next higher outline level. For example, if a level 2 heading is selected, then all level 2 headings under the same level 1 heading are shown, while any level 3-10 headings (under the same level 1 heading) are collapsed. Other headings, not under the same level 1 heading, are also collapsed.Choose
to disable Outline Tracking.Jumps to the selected item in the document.
Selects the item in the document.
Edit the properties of the selected item.
Renames the selected item. At item creation time, LibreOfficeDev assigns a unique name to the item within the document.
Deletes the selected item and all its contents.
Mark this checkbox to include the item when tracking changes.
Updates the index.
Removes the index. The contents of the index is not deleted but is not treated as an index anymore.
Check this box to prevent manual editing of the index content.
Deletes the index.
Mark this checkbox to include indexes when tracking changes.
Yorumları siler
Mark this checkbox to include comments when tracking changes.
Deletes the drawing object.
Mark this checkbox to include drawing objects when tracking changes.
Deletes the field.
Mark this checkbox to include fields when tracking changes.
Deletes the footnote.
Mark this checkbox to include footnotes when tracking changes.
Deletes the endnote.
Mark this checkbox to include endnotes when tracking changes.
Sorts alphabetically all entries in the selected category. Uncheck this option to sort entries according the their order of appearance in the document. Headings display flat in the Navigator when sorted alphabetically.
Expands or collapse the display of objects under the selected category. Document objects names are displayed under the category entry. Click on an entry to jump to the object in the document.
Açık tüm metin belgelerini listeler. Gezgin penceresi içerisinde belge içeriklerini görmek için, listeden belge adını seçiniz. Gezgin içerisinde gösterilen mevcut belge listedeki adından sonraki "etkin" kelimesi ile belirtilir.
Select the document that you want to view.